[Federal Register: June 6, 2003 (Volume 68, Number 109)]
[Notices]
[Page 33942-33946]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr06jn03-70]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPP-2003-0164; FRL-7306-5]
Bacillus Thuringiensis VIP3A Insect Control Protein; Notice of
Filing a Pesticide Petition to Establish a Tolerance for a Certain
Pesticide Chemical in or on Food
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: This notice announces the initial filing of a pesticide
petition proposing the establishment of regulations for residues of a
certain pesticide chemical in or on various food commodities.
DATES: Comments, identified by docket ID number OPP-2003-0164, must be
received on or before July 7, 2003.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Leonard Cole, Biopesticides and
Pollution Prevention Division (7511C), Office of Pesticide Programs,
Environmental Protection Agency, 1200 Pennsylvania Ave., NW.,
Washington, DC 20460-0001; telephone number: (703) 305-5412; e-mail
address: cole.leonard@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
You may be potentially affected by this action if you are an
agricultural producer, food manufacturer, or pesticide manufacturer.
Potentially affected categories and entities may include, but are not
limited to:
[sbull] Crop production (NAICS 111)
[sbull] Animal productiom (NAICS 112)
[sbull] Food manufacturing (NAICS 311)
[sbull] Pesticide manufacturing (NAICS 32532)
This listing is not intended to be exhaustive, but rather provides
a guide for readers regarding entities likely to be affected by this
action. Other types of entities not listed in this unit could also be
affected. The North American Industrial Classification System (NAICS)
codes have been provided to assist you and others in determining
whether this action might apply to certain entities. If you have any
questions regarding the applicability of this action to a particular
entity, consult the person listed under FOR FURTHER INFORMATION
CONTACT.
B. How Can I Get Copies of this Document and Other Related Information?
1. EPA Docket. EPA has established an official public docket for
this action under docket ID number OPP-2003-0164. The official public
docket consists of the documents specifically referenced in this
action, any public comments received, and other information related to
this action. Although, a part of the official docket, the public docket
does not include Confidential Business Information (CBI) or other
information whose disclosure is restricted by statute. The official
public docket is the collection of materials that are available for
public viewing at the Public Information and Records Integrity Branch
(PIRIB), Rm. 119, Crystal Mall 2, 1921 Jefferson Davis Hwy.,
Arlington, VA. This docket facility is open from 8:30 a.m. to 4 p.m.,
Monday through Friday, excluding legal holidays. The docket telephone
number is (703) 305-5805.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet
[[Page 33943]]
under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/
.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although, not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA
dockets. Information claimed as CBI and other information whose
disclosure is restricted by statute, which is not included in the
official public docket, will not be available for public viewing in
EPA's electronic public docket. EPA's policy is that copyrighted
material will not be placed in EPA's electronic public docket but will
be available only in printed, paper form in the official public docket.
To the extent feasible, publicly available docket materials will be
made available in EPA's electronic public docket. When a document is
selected from the index list in EPA dockets, the system will identify
whether the document is available for viewing in EPA's electronic
public docket. Although, not all docket materials may be available
electronically, you may still access any of the publicly available
docket materials through the docket facility identified in Unit I.B.1.
EPA intends to work towards providing electronic access to all of the
publicly available docket materials through EPA's electronic public
docket.
For public commenters, it is important to note that EPA's policy
is that public comments, whether submitted electronically or on paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide a reference to that
material in the version of the comment that is placed in EPA's
electronic public docket. The entire printed comment, including the
copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the photograph
will be placed in EPA's electronic public docket along with a brief
description written by the docket staff.
C. How and to Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number in the subject line on the first page of
your comment. Please ensure that your comments are submitted within the
specified comment period. Comments received after the close of the
comment period will be marked ``late.'' EPA is not required to consider
these late comments. If you wish to submit CBI or information that is
otherwise protected by statute, please follow the instructions in Unit
I.D. Do not use EPA dockets or e-mail to submit CBI or information
protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also, include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket
, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPP-2003-0164. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to opp-docket@epa.gov,
Attention: Docket ID number OPP-2003-0164. In contrast to EPA's
electronic public docket, EPA's e-mail system is not an ``anonymous
access'' system. If you send an e-mail comment directly to the docket
without going through EPA's electronic public docket, EPA's e-mail
system automatically captures your e-mail address. E-mail addresses
that are automatically captured by EPA's e-mail system are included as
part of the comment that is placed in the official public docket, and
made available in EPA's electronic public docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Public Information and Records
Integrity Branch (PIRIB) (7502C), Office of Pesticide Programs (OPP),
Environmental Protection Agency, 1200 Pennsylvania Ave., NW.,
Washington, DC 20460-0001, Attention: Docket ID number OPP-2003-0164.
3. By hand delivery or courier. Deliver your comments to: Public
Information and Records Integrity Branch (PIRIB), Office of Pesticide
Programs (OPP), Environmental Protection Agency, Rm. 119, Crystal Mall
2, 1921 Jefferson Davis Hwy., Arlington, VA, Attention: Docket
ID number OPP-2003-0164. Such deliveries are only accepted during the
docket's normal hours of operation as identified in Unit I.B.1.
D. How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of
[[Page 33944]]
the comment that does not contain the information claimed as CBI must
be submitted for inclusion in the public docket and EPA's electronic
public docket. If you submit the copy that does not contain CBI on disk
or CD ROM, mark the outside of the disk or CD ROM clearly that it does
not contain CBI. Information not marked as CBI will be included in the
public docket and EPA's electronic public docket without prior notice.
If you have any questions about CBI or the procedures for claiming CBI,
please consult the person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you
used that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Make sure to submit your comments by the deadline in this
notice.
7. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action in the subject line on the first page
of your response. You may also provide the name, date, and Federal
Register citation.
II. What Action is the Agency Taking?
EPA has received a pesticide petition as follows proposing the
establishment and/or amendment of regulations for residues of a certain
pesticide chemical in or on various food commodities under section 408
of the Federal Food, Drug, and Cosmetic Act (FFDCA), 21 U.S.C. 346a.
EPA has determined that this petition contains data or information
regarding the elements set forth in FFDCA section 408(d)(2); however,
EPA has not fully evaluated the sufficiency of the submitted data at
this time or whether the data support granting of the petition.
Additional data may be needed before EPA rules on the petition.
List of Subjects
Environmental protection, Agricultural commodities, Feed
additives, Food additives, Pesticides and pests, Reporting and
recordkeeping requirements.
Dated: May 29, 2003.
Janet L. Andersen,
Director, Biopesticides and Pollution Prevention Division, Office of
Pesticide Programs.
Summary of Petition
The petitioner's summary of the pesticide petition is printed
below as required by FFDCA section 408(d)(3). The summary of the
petition was prepared by the Syngenta Seeds, Inc. petitioner and
represents the view of the petitioner. The petition summary announces
the availability of a description of the analytical methods available
to EPA for the detection and measurement of the pesticide chemical
residues or an explanation of why no such method is needed.
Syngenta Seeds, Inc.
PP 3G6547
EPA has received a pesticide petition (PP 3G6547) from Syngenta
Seeds, Inc., P.O. Box 12257, 3054 Cornwallis Road, Research Triangle
Park, NC 27709-2257, proposing pursuant to section 408(d) of the
Federal Food, Drug, and Cosmetic Act (FFDCA), 21 U.S.C. 346a(d), to
amend 40 CFR part 180 to establish an exemption from the requirement of
a tolerance for the pesticide Bacillus thuringiensis VIP3A insect
control protein, as expressed in event COT102, and the genetic material
necessary for its production in or on cotton.
Pursuant to section 408(d)(2)(A)(i) of the FFDCA, as amended,
Syngenta Seeds, Inc. has submitted the following summary of
information, data, and arguments in support of their pesticide
petition. This summary was prepared by Syngenta Seeds, Inc., and EPA
has not fully evaluated the merits of the pesticide petition. The
summary may have been edited by EPA if the terminology used was
unclear, the summary contained extraneous material, or the summary
unintentionally made the reader conclude that the findings reflected
EPA's position and not the position of the petitioner.
A. Product Name and Proposed Use Practices
Syngenta has developed a new cotton line that expresses an insect
control protein designated VIP3A. It has been genetically incorporated
into a cotton plant product identified as Bacillus thuringiensis (Bt)
VIP3A insect control protein as expressed in event COT102. VIP3A is one
of a novel class of recently discovered insecticidal proteins that
occur naturally in Bacillus thuringiensis. The VIPs (vegetative
insecticidal proteins) are produced during vegetative bacterial growth.
Other than its demonstrated insecticidal activity, VIP3A is not
known to have any other biological or catalytic function. Although,
VIP3A protein shares no homology with known Cry proteins, extensive
testing has established that VIP3A is similarly very specific in its
activity, and has demonstrated toxicity only to the larvae of certain
lepidopteran species, including key pests of cotton. Further, because
VIP3A appears to target a different receptor than Cry proteins in
sensitive species, it represents a potentially useful tool in the
prevention or management of pest resistance to Cry proteins.
Upon commercial introduction, the use of transgenic VIP3A cotton
plants is expected to offer an important new option in lepidopteran
pest control and integrated pest management programs. Moreover, VIP3A
cotton will be an attractive, biologically based alternative to the use
of foliar insecticides. The use of VIP3A cotton plants is expected to
offer substantial environmental and worker safety benefits associated
with the reduced need for broad-spectrum insecticides. Additionally,
benefits to cotton growers will likely include greater profitability,
convenience and predictability in producing a high-yielding cotton
crop.
VIP3A-expressing cotton plants derived from transformation event
COT102 have been field tested under U. S. Department of Agriculture
(USDA) notifications and in compliance with the guidelines for USDA-
regulated plantings in 2000, 2001, and 2002. The overall results of
those trials have indicated that cotton plants derived from event
COT102 have significant and specific insecticidal activity against
several lepidopteran pests including, but not limited to, Helicoverpa
zea (cotton bollworm), Heliothis virescens (tobacco budworm), and
Pectinophora gossypiella (pink bollworm)
B. Product Identity/Chemistry
1. Identity of the pesticide and corresponding residues. Cotton,
Gossypium hirsutum, has been genetically modified to be resistant to
selected lepidopteran insect pests. Insect protection was accomplished
by the insertion of the VIP3A(a) gene, which was cloned from Bacillus
thuringiensis strain AB88. The identity of the active pesticidal
ingredient in cotton plants derived from transformation event COT102
includes the protein VIP3A and the genetic material necessary for its
production in cotton. Research has demonstrated the
[[Page 33945]]
specific insecticidal properties of VIP3A to certain lepidopteran
insects in cotton as well as its lack of effects on nontarget organisms
such as mammals, birds, fish, and beneficial insects.
2. Magnitude of residue. A determination of the magnitude of
residue at harvest is not required for residues exempt from tolerances.
However, the petitioner has provided data on the quantity of VIP3A
protein measured in various plant parts including seeds of VIP3A
cotton, as measured by enzyme linked immunosorbent assay (ELISA).
Additionally, the petitioner has provided data on the quantity or
presence of VIP3A protein in processed cottonseed products.
3. A statement of why an analytical method for detecting and
measuring the levels of the pesticide residue are not needed. An
analytical method is not required because this petition requests an
exemption from tolerances. However, the petitioner has submitted an
analytical method for detection of the VIP3A protein in cottonseed by
ELISA analysis.
C. Mammalian Toxicological Profile
The VIP3A(a) gene expressed in event COT102 cotton is very similar
(ca. 99% homology) to VIP3A or VIP3A--like genes that appear to occur
commonly in Bt strains from a variety of sources. In addition, it has
been determined that the VIP3A protein demonstrates insect specific
toxicity and must be ingested to be active. Once in the insect gut, the
VIP3A protein binds to specific receptors (different from those bound
by Cry1A proteins), inserts into the membrane and forms ion-specific
pores. These events disrupt the digestive processes and cause death of
the insect. The lack of mammalian toxicity has been confirmed in
numerous safety studies conducted in laboratory animals, which are
traditional experimental surrogates for humans. These studies,
summarized herein, demonstrate the lack of toxicity of the VIP3A
protein following high-dose acute oral exposures to mice, rapid
degradation of VIP3A upon exposure to simulated gastric fluid, and the
lack of amino acid sequence similarity of the VIP3A protein to proteins
known to be mammalian toxins or human allergens. It can be concluded
from these studies that the VIP3A protein will be non-toxic to humans.
When proteins are toxic, they are known to act via acute
mechanisms and at very low doses (Ref. 1). Therefore, when a protein
demonstrates no acute oral toxicity in high-dose testing using a
standard laboratory mammalian test species, this supports the
determination that the protein will be non-toxic to humans and other
mammals, and will not present a hazard under any realistic exposure
scenario, including long-term exposures.
Studies conducted to assess the mammalian safety of VIP3A protein
have demonstrated no toxicity. Four acute oral toxicity studies in mice
have been completed. Three of the VIP3A test substances used were
produced via microbial expression systems and one prepared by
extracting protein from leaves of VIP3A event Pacha-derived corn
plants. The four test substances contained VIP3A protein that differed
from the VIP3A protein expressed in event COT102 by zero to two amino
acids. At maximum dosage the microbially expressed test substance was
administered at a level of 5,000 milligrams/kilogram (mg/kg) with an
estimated acute lethal dose (LD)50 by gavage determined to
be >3,675 mg VIP3A/kg mg/kg/bwt/wt. Because toxicity was not observed
at this dose, it can be concluded that the LD50 for pure
VIP3A protein is >3,675 mg/kg body weight. The VIP3A protein in both
the microbial and plant derived test substance was determined to be
substantially equivalent to VIP3A produced in event COT102 derived
cotton plants, as measured by biological activity, protein size,
immunreactivity, mass spectral analysis of amino acid sequence, and
apparent lack of post-translational modifications.
The amino acid sequence of VIP3A is not homologous to that of any
known or putative allergens described in public data bases. The VIP3A
protein is not derived from a known source of allergens and does not
display characteristics commonly associated with allergens, including
glycosylation or stability to heat and food processing. Additionally,
VIP3A is susceptible to gastric digestion by pepsin and did not provoke
an allergic response in an experimental atopic dog model of human food
allergy.
VIP3A protein appears to be present in multiple commercial
formulations of Bacillus thuringiensis microbial insecticides at
concentrations estimated to be ca. 0.4 32 parts per million (ppm). This
conclusion is based on the presence of proteins of the appropriate
molecular weight and immunoreactivity (by SDS-PAGE and western blot),
and quantitation by ELISA. Therefore, it is conceivable that small
quantities of VIP3A protein are present in the food supply because
VIP3A or a very similar protein, based on size and immunoreactivity
appears to be present in currently registered insecticide products used
on food crops, including fresh market produce. These commercial
Bacillus thuringiensis products are all exempt from food and feed
tolerances.
D. Aggregate Exposure
1. Dietary exposure--i. Food. Food products derived from cotton
(refined cottonseed oil and cellulose linters fiber) are highly
processed and are essentially devoid of any proteins. Moreover, no
VIP3A protein was detected in refined cottonseed oil or cotton fiber
produced from event COT102-derived VIP3A cotton plants. Therefore, no
human dietary exposure to VIP3A protein is expected to occur via VIP3A
cotton. Even if dietary exposure to VIP3A protein were to occur, data
derived from bioinformatic analyses as well as direct in vitro and in
vivo testing collectively indicate that the VIP3A protein is unlikely
to have allergenic potential. The amino acid sequence of VIP3A is not
homologous to that of any known or putative allergens described in
public data bases. The VIP3A protein is not derived from a known source
of allergens and does not display characteristics commonly associated
with allergens, including glycosylation or stability to heat and food
processing. Additionally, VIP3A is susceptible to gastric digestion by
pepsin and did not provoke an allergic response in an experimental
atopic dog model of human food allergy.
ii. Drinking water. No exposure to VIP3A and the genetic material
necessary for its production in cotton via drinking water is expected.
The proteins are incorporated into the plant and will not be available.
However, if exposure were to occur by this route, no risk would be
expected because the VIP3A protein is not toxic to mammals.
2. Non-dietary exposure. Non-dietary exposure is not anticipated,
due to the proposed use pattern of the product. Exposure via dermal or
inhalation routes is unlikely because the plant-incorporated protectant
is contained within plant cells. However, if exposure were to occur by
non-dietary routes, no risk would be expected because the VIP3A protein
is not toxic to mammals.
E. Cumulative Exposure
Because there is no indication of mammalian toxicity to the VIP3A
protein, it is reasonable to conclude that there are no cumulative
effects for this plant-incorporated protectant.
F. Safety Determination
1. U.S. population. The lack of mammalian toxicity at high levels
of exposure to the VIP3A protein
[[Page 33946]]
demonstrates the safety of the product at levels well above possible
maximum exposure levels anticipated via consumption of processed food
products produced from VIP3A cotton. Moreover, little to no human
dietary exposure to VIP3A protein is expected to occur via VIP3A
cotton. Due to the lack of toxicity of the VIP3A protein and its very
low potential for allergenicity, dietary exposure is not anticipated to
pose any harm for the U.S. population. No special safety provisions are
applicable for consumption patterns or for any population sub-groups.
2. Infants and children. The plant-incorporated protectant active
ingredient, Bacillus thuringiensis VIP3A insect control protein and the
genetic material necessary for its production in cotton, demonstrates
no mammalian toxicity. Thus, there are no threshold effects of concern
and, consequently, there is no need to apply an additional margin of
safety.
G. Effects on the Immune and Endocrine Systems
The safety data submitted show no adverse effects in mammals, even
at very high dose levels, and support the prediction that the VIP3A
protein would be non-toxic to humans. Therefore, no effects on the
immune or endocrine systems are predicted. When proteins are toxic,
they are known to act via acute mechanisms and at very low dose levels
(Ref. 1). Further, the VIP3A protein is derived from a source that is
not known to exert an influence on the endocrine system.
H. Existing Tolerances
There are no existing tolerances for the Bacillus thuringiensis
VIP3A protein and the genetic material necessary for its production.
Other Bacillus thuringiensis based pesticide products are exempt from
tolerances.
I. International Tolerances
There are no existing international tolerances or exemptions from
tolerance for the Bacillus thuringiensis VIP3A protein and the genetic
material necessary for its production.
J. Reference
1. Sjoblad, R. D., J. T. McClintock and R. Engler, (1992)
Toxicological Consideration for Protein Components of Biological
Pesticide Products. Regulatory toxicol Pharmacol 15: 3-9
[FR Doc. 03-14199 Filed 6-5-03; 8:45 am]
BILLING CODE 6560-50-S