[Federal Register Volume 68, Number 120 (Monday, June 23, 2003)]
[Notices]
[Pages 37153-37158]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 03-15768]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2003-0030; FRL-7314-3]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from April 28, 2003 to May 23, 2003, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
DATES: Comments identified by the docket ID number OPPT-2003-0030 and
the specific PMN number or TME number, must be received on or before
July 23, 2003.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Director,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. How Can I Get Copies of This Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket identification (ID) number OPPT-2003-0030. The
official public docket consists of the documents specifically
referenced in this action, any public comments received, and other
information related to this action. Although a part of the official
docket, the public docket does not include Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute. The official public docket is the collection of materials
that is available for public viewing at the EPA Docket Center, Rm.
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington,
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The EPA Docket Center Reading
Room telephone number is (202) 566-1744 and the telephone number for
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide a reference to that
material in the version of the comment that is placed in EPA's
electronic public docket. The entire printed comment, including the
copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the
[[Page 37154]]
photograph will be placed in EPA's electronic public docket along with
a brief description written by the docket staff.
C. How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number and specific PMN number or TME number in
the subject line on the first page of your comment. Please ensure that
your comments are submitted within the specified comment period.
Comments received after the close of the comment period will be marked
``late.'' EPA is not required to consider these late comments. If you
wish to submit CBI or information that is otherwise protected by
statute, please follow the instructions in Unit I.D. Do not use EPA
Dockets or e-mail to submit CBI or information protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPPT-2003-0030. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to [email protected],
Attention: Docket ID Number OPPT-2003-0030 and PMN Number or TME
Number. In contrast to EPA's electronic public docket, EPA's e-mail
system is not an ``anonymous access'' system. If you send an e-mail
comment directly to the docket without going through EPA's electronic
public docket, EPA's e-mail system automatically captures your e-mail
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the
official public docket, and made available in EPA's electronic public
docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Document Control Office (7407M),
Office of Pollution Prevention and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
3. By hand delivery or courier. Deliver your comments to: OPPT
Document Control Office (DCO) in EPA East Building Rm. 6428, 1201
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number
OPPT-2003-0030 and PMN Number or TME Number. The DCO is open from 8
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930.
D. How Should I Submit CBI To the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the technical person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the notice or collection
activity.
7. Make sure to submit your comments by the deadline in this
document.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action and the specific PMN number you are
commenting on in the subject line on the first page of your response.
You may also provide the name, date, and Federal Register citation.
II. Why Is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from April 28, 2003 to May 23, 2003,
consists of the PMNs pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of
[[Page 37155]]
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period. If you are interested in
information that is not included in the following tables, you may
contact EPA as described in Unit II. to access additional non-CBI
information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 67 Premanufacture Notices Received From: 04/28/03 to 05/23/03
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-03-0518 04/29/03 07/28/03 CBI (G) Open, non- (G) Acrylic polymer
dispersive use
P-03-0519 04/29/03 07/28/03 Optima Chemical (G) Enhances fibers (S) 2,4-dichloro-n-
Group, LLC ((2,4-
dichlorophenyl)
methyl)-n-hydroxy-
benzenemethanamine
P-03-0520 04/29/03 07/28/03 Dow Corning (G) Stabilizer (G) Silicone resin
Corporation
P-03-0521 04/29/03 07/28/03 CBI (G) Processing aid (G) Salt of a
copolymer of acrylic
acid and acrylic
acid derivatives
P-03-0522 04/30/03 07/29/03 BASF Corporation (S) Diesel additive (G) Octa-alkyl
ethylenediamine
tetraacetamide
P-03-0523 04/30/03 07/29/03 CBI (G) Highly dispersive (G) Disubstituted
use benzene
P-03-0524 04/30/03 07/29/03 Ashland Chemical (G) Open non- (G) Unsaturated
Company dispersive polyester
manufacture of
reinforced plastics
P-03-0525 05/01/03 07/30/03 CBI (G) Can coating resin (G) Phenolic Resin
P-03-0526 05/01/03 07/30/03 CBI (G) Paper additive (G) Substituted
aromatic carboxylic
acid salt
P-03-0527 05/01/03 07/30/03 Vantico Inc. (G) Accelerator for (G) 2-propenoic acid,
epoxy thermoset uses 2-methyl-, polymer
with 1,2-ethanediyl
bis(2-methyl-2-
propenoate), 2-ethyl-
2-[[(2-methyl-1-oxo-
2-
propenyl)oxy]methyl]-
1,3-propanediyl
bis(2-methyl-2-
propenoate) and
methyl 2-methyl-2-
propenoate, compound
with imidazole
P-03-0528 05/01/03 07/30/03 Vantico Inc. (G) Accelerator for (G) 2-propenoic acid,
epoxy thermoset uses 2-methyl-, polymer
with 1,2-ethandiyl
bis(2-methyl-2-
propenoate), 2-ethyl-
2-[[(2-methyl-1-oxo-
2-
propenyl)oxy]methyl]-
1,3-propanediyl
bis(2-methyl-2-
propenoate) and
methyl 2-methyl-2-
propenoate, compound
with imidazole
P-03-0529 05/01/03 07/30/03 CBI (G) Processing aid (G) Salt of mixed
fatty amidoamines
and
polyethylenepolyamin
es
P-03-0530 05/01/03 07/30/03 CBI (G) Processing aid (G) Salt of a
polyethylenepolyamin
e derivative
P-03-0531 05/01/03 07/30/03 CBI (G) Processing aid (G) Salt of mixed
fatty amidoamines
P-03-0532 05/05/03 08/03/03 Bedoukian Research, (S) Chemical (G) Unsaturated alkyl
Inc. intermediate grignard reagent
P-03-0533 05/05/03 08/03/03 Wacker Chemical (S) Crosslinker for (S) 2-propenoic acid,
Corporation adhesives/sealants 2-methyl-,
(trimethoxysilyl)met
hyl ester
P-03-0534 05/05/03 08/03/03 CBI (S) Surfactant as an (G) Propoxylated
ashphalt emulsifier tallow polypropylene
polyamine
P-03-0535 05/06/03 08/04/03 Advanced Silicon (G) Chemical reactant (S) Silicon hydride
Materials LLC (destructive use)
P-03-0536 05/05/03 08/03/03 CBI (G) Ink Additive (G) Polymer of
substituted
allylamine
P-03-0537 05/05/03 08/03/03 CBI (G) Paint additive (G) Polyurethane
P-03-0538 05/05/03 08/03/03 CBI (G) Paint additive (G) Polyurethane
P-03-0539 05/05/03 08/03/03 CBI (G) Paint additive (G) Polyurethane
P-03-0540 05/08/03 08/06/03 BASF Corporation (G) Component for (G) Hexanedioic acid,
polyurethane foam. polymer with
aliphatic diols
P-03-0541 05/08/03 08/06/03 UCB Chemicals (S) Resin for (G) Polyurethane
Corporation coatings resin
P-03-0542 05/09/03 08/07/03 CBI (G) Thermoset, 2-part (G) Nitrile-butadiene
adhesive component. extended epoxy resin
open nondispersive
use
P-03-0543 05/09/03 08/07/03 CBI (G) Thermoset, 2-part (G) Nitrile-butadiene
adhesive component. extended epoxy resin
open nondispersive
use
P-03-0544 05/13/03 08/10/03 CBI (G) Textile additive (G) Difattyacid
amidoethyl dialkyl
ammonium salt
[[Page 37156]]
P-03-0545 05/14/03 08/11/03 CBI (G) Organic foundry (G) Alkyl polyhydroxy
binder, fast-curing aromatics
wood adhesives, tire
cord adhesive;
rubber cross-linking
agent tires, flame
retardant for
thermoplastics
P-03-0546 05/14/03 08/11/03 Cardolite Corporation (S) Epoxy curing (G) Amine functional
agent epoxy curing agent
P-03-0547 05/15/03 08/12/03 Cytec Engineered (G) Resin for non- (G) Epoxy-bisphenol
Materials Inc. (cem) dispersive use adduct
P-03-0548 05/15/03 08/12/03 BASF Corporation (S) Processing aid (G) Ethoylated alkyl
for leather tanning alcohol
P-03-0549 05/15/03 08/12/03 CBI (G) Open, non- (G) 1,3-
dispersive bis(dimethoxyethylol
) 4,5-
dihydroxyethylene
urea
P-03-0550 05/13/03 08/10/03 Cardolite Corporation (S) Epoxy curing (G) Amine functional
agent epoxy curing agent
P-03-0551 05/13/03 08/10/03 Cardolite Corporation (S) Epoxy curing (G) Amine functional
agent curing agent
P-03-0552 05/16/03 08/13/03 Reichhold, Inc. (G) Resin for (G) Amine salt of
coatings cyclic carboxylic
acid, polymer with
hydroxy substituted
alkane, branched
alkyl diol,
alkanediol,
alkoxylated triol
and alkanetriol
P-03-0553 05/16/03 08/13/03 Zeon Chemicals L.P. (S) Tackifier for use (G) Elastomer
in manufacturing modified epoxy resin
composite laminates
P-03-0554 05/16/03 08/13/03 CBI (G) Adhesives for (G) Polyurethane
automotive
applications
P-03-0555 05/19/03 08/16/03 Forbo adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-03-0556 05/19/03 08/16/03 Ashland Inc., (G) Pressure (G) Copolymer of
Environmental Health sensitive adhesive acrylic esters,
and Safety for labels methacrylic esters
and styrene
P-03-0557 05/16/03 08/13/03 CBI (G) Laminating (G) Polyurethane
adhesive
P-03-0558 05/16/03 08/13/03 CBI (G) Laminating (G) Polyurethane
adhesive
P-03-0559 05/19/03 08/16/03 PPG Industries, Inc. (G) Component of (G) Silica dispersion
coating with an open
use
P-03-0560 05/19/03 08/16/03 CBI (G) Ingredients for (G) Macrocyclic
use in consumer alkoxy ether
products: highly
dispersive use
P-03-0561 05/19/03 08/16/03 Idemitsu Chemicals (G) Monomer (S) 2-propenoic acid,
U.S.A. Corporation 2-methyl-, 3-
hydroxytricyclo[3.3.
1.13,7]dec-1-yl
ester
P-03-0562 05/19/03 08/16/03 Idemitsu Chemicals (G) Monomer (S) 2-propenoic acid,
U.S.A. Corporation 2-methyl-, 2-
methyltricyclo[3.3.1
.13,7]dec-2-yl ester
P-03-0563 05/19/03 08/16/03 Idemitsu Chemicals (G) Monomer (S) 2-propenoic acid,
U.S.A. Corporation 2-methyl-, 2-
ethyltricyclo[3.3.1.
13,7]dec-2-yl ester
P-03-0564 05/19/03 08/16/03 Idemitsu Chemicals (G) Monomer (S) 2-propenoic acid,
U.S.A. Corporation 3-
hydroxytricyclo[3.3.
1.13,7]dec-2-yl
ester
P-03-0565 05/19/03 08/16/03 Idemitsu Chemicals (G) Monomer (S) 2-propenoic acid,
U.S.A. Corporation 2-
methyltricyclo[3.3.1
.13,7]dec-2-yl ester
P-03-0566 05/19/03 08/16/03 Idemitsu Chemicals (G) Monomer (S) 2-propenoic acid,
U.S.A. Corporation 2-
ethyltricyclo[3.3.1.
13,7{time} dec-2-yl
ester
P-03-0567 05/20/03 08/17/03 E.I. Dupont De (G) Polymer additive (G) Phosphonium salt
Nemours and Co. of substituted
alkylsulfonate
P-03-0568 05/20/03 08/17/03 Atk Thiokol (S) Exlposive; (S) 5,2,6-
Propulsion propellants (iminomethenimino)-
1h-imidazo[4,5-
b]pyrazine, 1,3,8,10-
tetraacetyloctahydro-
P-03-0569 05/20/03 08/17/03 CBI (S) Film coating (G) Saturated
copolyester
P-03-0570 05/21/03 08/18/03 Blaser swisslube Inc. (G) Metalworking (G) Phosphate of a
fluid substituted alkanol
P-03-0571 05/20/03 08/17/03 Croda Inc. (S) Fragrance (S) Poly[oxy(methyl-
solubilizer into non 1,2-
polar solvents; ethanediyl)],.alpha.
pigments wetting ,.alpha.'-(1,6-dioxo-
agent 1,6hexanediyl)bis[.o
mega.-
(tetradecyloxy)-
P-03-0572 05/22/03 08/19/03 CBI (G) Semiconductor (G) Alkylated
manufacture polyamide
P-03-0573 05/19/03 08/16/03 DSM Resins U.S. (G) Raw material for (G) Polyester resin
Incorporated can coatings
[[Page 37157]]
P-03-0574 05/20/03 08/17/03 Ilford Imaging USA (S) Dye for inkjet (S) Cuprate(4-), [2-
printer ink (amino-
.kappa.n)ethanol][7-
[[3-(hydroxy-
.kappa.o)-4-[[1-
(hydroxy-.kappa.o)-3-
sulfo-7-[(2-
sulfoethyl)amino]-2-
naphthalenyl]azo]-
.kappa.n1]phenyl]azo
]-1,3-
naphthalenedisulfona
to(6-)]-,
tetrasodium
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 47 Notices of Commencement From: 04/28/03 to 05/23/03
----------------------------------------------------------------------------------------------------------------
Commencement/Import
Case No. Received Date Date Chemical
----------------------------------------------------------------------------------------------------------------
P-00-1106 05/20/03 05/06/03 (G) Polymer of aliphatic/
aromatic polycarboxylic
acids and aliphatic /
alicyclic polyols,
neutralized with
alkanolamine
P-01-0661 05/09/03 05/02/03 (G) Alkylated aromatic
P-02-0211 05/14/03 04/28/03 (G) Siloxane polyol ester
P-02-0224 05/13/03 05/09/03 (G) Poly(oxyalkylene)
aromatic amine colorant
P-02-0417 05/14/03 04/09/03 (G) Polyol
P-02-0501 05/13/03 04/14/03 (S) Ferrite substances,
magnetoplumbite-spinel
type, magnesium manganese
strontium
P-02-0534 05/13/03 04/28/03+ (G) Substituted
vinylether, ethoxylated
P-02-0861 05/12/03 04/16/03 (G) Silico-titano-
aluminophosphates
P-02-0894 05/01/03 04/04/03 (S) 1,3-
benzenedicarboxylic acid,
polymer with 2,2-dimethyl-
1,3-propanediol, 2-ethyl-
2-(hydroxymethyl)-1,3-
propanediol and 2,5-
furandione
P-02-0957 05/15/03 05/08/03 (G) Aromatic mixed esters
P-02-0969 05/05/03 04/03/03 (G) Polymer of a
carbomonocyclic
diisocyanate, a modified
polyalkene, hydroxyalkane
and a substituted
alkoxysilane
P-02-1009 05/14/03 05/05/03 (G) Polyurethane
crosslinker
P-02-1086 05/22/03 04/03/03 (G) Polymer of a
carbomonocyclic
diisocyanate, a modified
polyalkene, hydroxyalkane
and a substituted
alkoxysilane
P-03-0009 05/01/03 04/15/03 (G) Acrylic polymer
P-03-0030 05/21/03 05/06/03 (G) Epoxy-amine adduct
P-03-0044 05/19/03 05/09/03 (S) Glycerides, soya mono-
and di-, phosphates
P-03-0060 05/12/03 05/01/03 (G) Meko blocked
prepolymer of
cycloaliphatic isocyanate
and hydroxyalkane
carboxylic acid,
neutralized with
aminoalkanol
P-03-0064 04/30/03 03/26/03 (G) 2,5-furandione,
polymer with
ethenylbenzene,4-[(1-oxo-
2-propenyl)oxy]butyl
propyl ester, compound
with ammonia and amine
P-03-0071 05/13/03 03/19/03 (S) 2-propenoic acid, 2-
hydroxyethyl ester,
adduct with 5-isocyanato-
1-(isocyanatomethyl)-
1,3,3-
trimethylcyclohexane
(1:1), reaction products
with ethoxylated reduced
me ethers of reduced
polymd. oxidized
tetrafluoroethylene
P-03-0090 05/06/03 04/17/03 (G) Acrylic resin
P-03-0144 04/28/03 04/24/03 (G) Aliphatic polyurethane
P-03-0173 05/13/03 05/01/03 (G) Modified
polycarbocycles, maleated
P-03-0174 05/13/03 05/05/03 (G) Modified
polycarbocycles,
maleated, ethoxylated
P-03-0175 05/13/03 05/05/03 (G) Modified
polycarbocycles,
maleated, ethoxylated,
phosphates
P-03-0187 05/14/03 04/29/03 (G) Organometallic
compound
P-03-0195 05/05/03 04/11/03 (G) Aromatic acid ester
P-03-0201 05/06/03 04/17/03 (G) Fatty acid amide
ammonium chloride salts
P-03-0210 04/28/03 04/21/03 (G) Urethane modified
acrylic copolymer
P-03-0213 05/01/03 04/18/03 (G) Modified
polythioaminoketone
P-03-0216 05/22/03 05/06/03 (G) Acrylic copolymer
P-03-0217 05/08/03 04/08/03 (G) Polyester polyol
P-03-0218 04/25/03 04/11/03 (G) Alkyl borate
P-03-0219 04/28/03 04/21/03 (G) Urethane modified
acrylic copolymer
P-03-0241 05/12/03 04/24/03 (G) Vinyl acetate
copolymer
P-03-0242 05/06/03 04/24/03 (G) Vinyl acetate
copolymer
P-03-0243 05/14/03 04/09/03 (G) Polyol
P-03-0244 05/14/03 04/09/03 (G) Polyol
P-03-0245 05/14/03 04/09/03 (G) Polyol
P-03-0259 04/30/03 04/18/03 (G) Self-crosslinking
acrylic polymer
[[Page 37158]]
P-03-0260 04/30/03 04/22/03 (S) 1,3-benzenedimethanol,
alpha,alpha,alpha',alpha'-
tetramethyl-polymer with
phenol, glycidyl ethers
P-03-0261 05/22/03 05/12/03 (G) Acrylated uretahane
P-03-0281 05/06/03 04/30/03 (G) Acrylic copolymer
P-03-0285 05/07/03 04/24/03 (S) 1h-benz(e)indolium,
1,1,2,3-tetramethyl-,
salt with 4-
methylbenzenesulfonic
acid (1:1)
P-03-0287 05/07/03 04/29/03 (G) Substituted
pyridinemethanesulfonic
acid,
[[[(sulfooxy)ethyl]sulfon
yl]phenyl] [sulfophenyl],
sodium salt
P-03-0289 05/15/03 04/28/03 (G) Modified polyolefin
polyacrylate copolymer
P-95-0594 05/23/03 04/29/03 (G) Synthetic alkanes, C8-
15
P-97-0457 04/29/03 03/26/03 (S) Fatty acid, C14-18 and
C16-18-unsatured,
reaction products with
C18-unsatured fatty acid
dimers and
trimethylolpropane
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: June 12, 2003.
Sandra R. Wilkins,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 03-15768 Filed 6-20-03; 8:45 am]
BILLING CODE 6560-50-S