[Federal Register: September 25, 2003 (Volume 68, Number 186)]
[Notices]
[Page 55405-55407]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr25se03-75]
[[Page 55405]]
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
Bureau of Customs and Border Protection
Modification of Free and Secure Trade Prototype
AGENCY: Bureau of Customs and Border Protection, DHS.
ACTION: General notice.
-----------------------------------------------------------------------
SUMMARY: This document modifies the Free and Secure Trade (FAST)
prototype eligibility and application requirements from those
previously set forth in the Federal Register, and provides updated FAST
border site selections. The FAST prototype provides expedited
processing of participants' qualifying merchandise in designated
traffic lanes at select border sites. FAST processing utilizes two
separate cargo release mechanisms-a fully electronic system and a semi-
electronic system known as PAPS. The FAST prototype is modified to
include Southern border sites and additional Northern border sites.
To be eligible for FAST processing along the Northern and Southern
borders, merchandise must be entered by a C-TPAT-approved (Customs-
Trade Partnership Against Terrorism) importer; transported by a C-TPAT-
approved highway carrier participating under either the U.S./Canada
Border Highway Carriers Agreement or the Southern Border Highway
Carriers Agreement; and driven by a FAST-registered commercial driver.
In addition, in order to be eligible for FAST processing along the
Southern border, merchandise must be manufactured by a C-TPAT-approved
foreign manufacturer and securely sealed by the manufacturer.
To be eligible for the fully electronic cargo release system under
FAST, the importer, highway carrier, commercial driver, and foreign
manufacturer, where applicable, must meet the guidelines described
above, and the importer must submit a detailed application to CBP.
EFFECTIVE DATES: This modification of the FAST program is effective on
September 25, 2003. This prototype will be tested until the Automated
Commercial Environment (ACE) is completed. Applications to participate
in this prototype, where appropriate, may be submitted at any time
throughout the duration of this test. Evaluations of the prototype will
occur periodically.
ADDRESSES: Written requests to participate in the FAST program, as
necessary, should be sent to Customs and Border Protection, FAST
Registration Office, 50 South Main Street, Suite 100R, St. Albans,
Vermont 05478. Comments regarding any aspect of the test should be sent
or faxed to Enrique S. Tamayo, Customs and Border Protection, 1300
Pennsylvania Avenue, NW., Room 5.2A, Washington, DC 20229, telephone
number: (202) 927-3112; fax number: (202) 927-1096.
FOR FURTHER INFORMATION CONTACT: For detailed information and
application procedures on the C-TPAT and FAST initiatives, visit the
CBP Web site at http://www.cbp.gov.
For inquiries regarding the eligibility of specific importers:
Robert Thommen at (202) 927-0256;
For questions on reconciliation: John Leonard at (202) 927-0915;
For questions on statement processing: Debbie Scott at (202) 927-
1962;
For questions on violation billing: Donald Yando at (202) 927-1082;
For questions on other aspects of the FAST Prototype: Daniel
Buchanan at (617) 565-6236.
SUPPLEMENTARY INFORMATION:
Background
On March 27, 1997 the U.S. Customs Service (now Customs and Border
Protection, or CBP) published a General notice in the Federal Register
(62 FR 14731) that announced Customs plan to conduct a test, pursuant
to Sec. 101.9(b) of the Customs Regulations (19 CFR 101.9(b)), of a
planned National Customs Automation Program component (see 19 U.S.C.
1411-1414) called an account-based declaration prototype, known by the
acronym NCAP/P. This phase of the NCAP/P test, utilizing a fully
electronic cargo release system, was initially limited to certain
importers that imported certain merchandise by truck through three
ports.
On August 21, 1998, Customs published a General notice in the
Federal Register (63 FR 44949) revising the importer eligibility
requirements for participation in the fully electronic cargo release
system under NCAP/P, incorporating enhancements to reconciliation,
clarifying the statement process, outlining the development and
evaluation methodology that would be used in the test, and inviting
public comment on any aspect of the planned test. The notice also
included general requirements for the prototype, and information on
remote location filing, maintenance of account, misconduct procedures,
and suspension of regulatory provisions.
On December 16, 2002, a General notice was published in the Federal
Register (67 FR 77128) announcing the redesignation of the National
Customs Automation Program test of an Account-Based Declaration
Prototype (NCAP/P) as the Free and Secure Trade (FAST) prototype. The
program was expanded to include the semi-electronic Pre-Arrival
Processing System (PAPS), a modified usage of the cargo selectivity for
trucks arriving from Canada.
FAST Prototype--General Information
The FAST prototype is subject to the provisions set forth in the
August 21, 1998 notice, except as modified in today's notice. For ease
of reference, today's notice contains information on participating in
FAST-PAPS and all other pertinent information published in the December
16, 2002 notice.
The FAST program provides expedited processing of participants'
qualifying merchandise in designated traffic lanes at select border
sites. The FAST program is designed to enhance security and safety
along the Northern and Southern borders, while also enhancing the
economic prosperity of the U.S., Canada, and Mexico by aligning, to the
maximum extent possible, their customs commercial programs.
The NCAP/P (now FAST) originally utilized only a fully electronic
cargo release system. Because only one release system existed,
reference to the NCAP/P prototype and its release system was
interchangeable. Subsequently, upon redesignation of the NCAP/P to
FAST, a second cargo release system under the FAST prototype, known as
PAPS, was created. Therefore, expedited processing under the FAST
prototype became available via both PAPS and the original fully
electronic cargo release method.
FAST-PAPS is an automated cargo release procedure available for
merchandise imported by C-TPAT-approved (Customs-Trade Partnership
Against Terrorism) importers participating in Automated Broker
Interface (ABI) entry procedures (see 19 CFR part 143, subparts A and
D). Unlike the fully electronic version of FAST, FAST-PAPS makes use of
paper Inward Manifest forms and paper invoices, and no application is
required for participation in expedited processing via FAST-PAPS. ABI
importers can utilize FAST-PAPS with minimal changes to their operating
systems and processes.
FAST-PAPS requires an importer to submit to CBP certain entry data
prior to the arrival of the merchandise at the designated port of entry
for cargo selectivity concerns. The carrier must work with the
manufacturer and the importer to ensure that the data is
[[Page 55406]]
available to the importer in advance of arrival at the border. The
carrier must utilize barcode technology to expedite the release of the
shipment by attaching a unique barcode label, which consists of the
carriers Standard Carrier Alpha Code (SCAC) and either a pro bill of
lading (BOL) number or a unique transaction (UT) number to each invoice
and truck manifest prior to the importation of merchandise. The invoice
and the SCAC/BOL or SCAC/UT number is then transmitted to the customs
broker, who prepares a Cargo Selectivity entry via an ABI transmission
in the Automated Commercial System (ACS) before the merchandise arrives
at a FAST designated border site. When the merchandise arrives at the
site, the CBP inspector electronically records (scans) the barcode
information, which automatically retrieves the entry information from
the ACS system. If no examination is needed, the inspector may release
the truck from the primary booth; thus, reducing the carrier's wait
time and easing congestion at that border crossing.
Eligibility requirements for participation in FAST vary according
to the cargo release system option selected. Participation in either
FAST-PAPS or the fully electronic cargo release version of FAST is
subject to the guidelines provided below. In addition, participation in
FAST utilizing the fully electronic cargo release system requires an
importer to submit an application to CBP containing detailed
information on its trading partners and carriers, and other pertinent
information, in advance of commencement of shipping of merchandise.
Updated and complete application instructions for the fully electronic
cargo release method are provided under the Application for FAST
section below.
FAST Participation Guidelines
Subject to the provisions of the notice of August 21, 1998 (63 FR
44949), all importers, highway carriers, commercial drivers, and some
foreign manufacturers participating in either of the two cargo release
methods available under the FAST prototype must meet certain
guidelines, as summarized below:
Northern and Southern Border Requirements
In order to qualify for expedited processing along the Northern and
Southern borders, imported merchandise must be:
(1) Entered by an importer approved for C-TPAT membership;
(2) Transported by a carrier approved for C-TPAT membership and
approved under either the U.S./Canada Border Highway Carriers Agreement
or the Southern Border Highway Carriers Agreement; and
(3) Driven by a commercial driver registered and approved under
either the U.S./Canada FAST Commercial Driver Program or the U.S. FAST
Commercial Driver Program.
Southern Border Requirements
FAST processing along the Southern border requires compliance with
the eligibility provisions (1)-(3), above, in addition to the following
two provisions:
(4) Imported merchandise must have been manufactured by a
manufacturer approved for C-TPAT membership;
(5) ISO/PAS 17712 high security seals must be affixed to the
trucks, trailers and containers used to carry the goods to the port of
arrival.
The C-TPAT is a joint government-business initiative to build
cooperative relationships that strengthen overall supply chain and
border security for the U.S. Under the FAST prototype, importers must
be C-TPAT-approved, importers must utilize only C-TPAT-approved highway
carriers participating under either one of the listed highway carriers
agreements, and highway carriers must utilize only FAST-registered
commercial drivers for FAST processing. Detailed information on C-TPAT
approval, the highway carriers agreements, and FAST commercial drivers
registration procedures are addressed on the CBP Web site.
For importations along the Southern border only, the foreign
manufacturer of the merchandise being processed also must be C-TPAT-
approved. The foreign manufacturer must affix ISO/PAS 17712 high
security seals (manufactured to International Organization for
Standardization (ISO) standards from an approved ISO manufacturer) to
the trucks, trailers, and containers used to carry the merchandise to
the Southern border site. Incoming manifests for expedited Southern
border processing must document seal numbers.
CBP will determine the eligibility of the importer, highway
carrier, commercial driver, and foreign manufacturer, when applicable,
to participate under FAST processing of merchandise. Conveyances not
meeting the basic guidelines for FAST participation may be redirected
to other non-FAST vehicle lanes or be otherwise delayed in processing
at the port of arrival.
For commercial drivers seeking participation in FAST processing
along the Southern border, but whom CBP deems ineligible for
participation, CBP plans to issue the applicant a CBP identification
card instead, which will grant access to commercial truck facilities
along the Southern border.
Application for FAST--Fully Electronic Cargo Release
For ease of reference, this notice provides complete and updated
application instructions to importers wishing to participate in the
fully electronic version of FAST.
To qualify for FAST processing utilizing the fully electronic cargo
release system, importers must meet the FAST participation guidelines
discussed above, and must submit an application to the St. Albans,
Vermont, Service Port at the address indicated above, with the
following information:
A. Importer's name, address, and IRS employer identification number
or social security number;
B. Names and addresses of all manufacturers and all sellers/vendors
for the electronic FAST prototype;
C. A listing of all the 6-digit HTS numbers under which the
imported commodities will be classified;
D. The surety and surety code and the number of the continuous
surety bond which will cover all cargo processed under FAST procedures.
If the applicant plans to reconcile their FAST entry summaries, a
commitment to file the bond rider prior to flagging underlying entry
summaries for reconciliation, along with identification of the port in
which the continuous bond and rider are filed must be included;
E. Names, addresses, and SCAC's of C-TPAT highway carriers who will
be transporting FAST shipments across the international borders;
F. Names, addresses and filer codes of any customs brokers who will
be filing data;
G. The approximate total number of entries per month expected to be
processed at each of the following locations:
1. Port Huron (Blue Water Bridge), Michigan;
2. Detroit (Ambassador Bridge), Michigan;
3. Blaine, Washington;
4. Buffalo (including the Peace Bridge and Lewiston Bridge), New
York;
5. Champlain, New York; and
6. Laredo, Texas.
H. Detailed description of anticipated issues and/or commodities
for which the participant anticipates electing reconciliation.
CBP will make admissibility determinations on fully electronic FAST
processing of merchandise based on cargo examinations and the
information supplied with the application, which
[[Page 55407]]
will serve as a pre-filed entry for FAST purposes. Importers who submit
applications to participate in the fully electronic version of the FAST
prototype will be notified in writing of their acceptance or rejection.
If an applicant is denied participation, the notification letter will
include the reasons for that denial. An importer whose initial
application was rejected may resubmit an application upon correction of
the situation that led to the rejection.
FAST Processing Border Sites
This document provides an updated and complete list of
participating FAST processing border sites along the Northern and
Southern borders. CBP assessed several factors in selecting expedited
border sites along the Northern and Southern borders, including road
infrastructure, adequacy of port facilities, and commercial traffic
volumes. CBP further assessed service needs and concerns to support
major importers along the U.S./Canadian border, and assessed enhanced
security requirements and expeditious commercial requirements along the
U.S./Mexican border.
The fully electronic cargo release system is available only at five
Northern border sites, and one Southern border site, and requires a
participant to invest in a fully electronic communication system with
CBP. In contrast, FAST-PAPS release is available to all qualifying ABI
participants and at all FAST border sites.
The following is a complete list of FAST-participating Northern
border sites. Unless otherwise indicated, both methods of cargo release
under the FAST prototype are currently available at a site:
(1) Port Huron (Blue Water Bridge), Michigan;
(2) Detroit (Ambassador Bridge), Michigan;
(3) Blaine, Washington;
(4) Buffalo (including the Peace Bridge and Lewiston Bridge), New
York;
(5) Champlain, New York;
(6) Pembina, North Dakota (FAST-PAPS only);
(7) Portal, North Dakota (FAST-PAPS only);
(8) Sweet Grass, Montana (FAST-PAPS only);
(9) Derby Line, Vermont (FAST-PAPS only);
(10) Highgate Springs, Vermont (FAST-PAPS only);
(11) Alexandria Bay, New York (FAST-PAPS only);
(12) Houlton, Maine (enrollment center only).
Expedited processing of merchandise was previously suspended at the
Southern border port of Laredo, Texas. While both the fully electronic
and PAPS versions of FAST expedited processing will now be available at
the port of Laredo, only the PAPS version will be available at the
remaining participating Southern border sites:
(1) Laredo, Texas;
(2) El Paso, Texas (FAST-PAPS only);
(3) Hidalgo, Texas (FAST-PAPS only);
(4) Brownsville, Texas (FAST-PAPS only);
(5) Otay Mesa, California (FAST-PAPS only);
(6) Calexico, California (FAST-PAPS only);
(7) Nogales, Arizona (FAST-PAPS only).
An importer wishing to participate in the fully electronic version
of FAST at a port listed as only FAST-PAPS capable, should notify CBP
of its interest by contacting the FAST Processing Center. CBP will
evaluate the amount of volume expected to be cleared in a port, and
determine if the investment in technology and training necessary for
both parties justifies the expense.
Dated: September 22, 2003.
Jayson P. Ahern,
Assistant Commissioner, Office of Field Operations.
[FR Doc. 03-24260 Filed 9-24-03; 8:45 am]
BILLING CODE 4820-02-P