[Federal Register: December 17, 2003 (Volume 68, Number 242)]
[Notices]
[Page 70256-70264]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr17de03-71]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2003-0069; FRL-7338-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSC, EPA is required to publish a notice of receipt of a premanufacture
notice (PMN) or an application for a test marketing exemption (TME),
and to publish periodic status reports on the chemicals under review
and the receipt of notices of commencement to manufacture those
chemicals. This status report, which covers the period from October 1,
2003 to November 28, 2003, consists of the PMNs pending or expired, and
the notices of commencement to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period.
DATES: Comments identified by the docket ID number OPPT-2003-0069 and
the specific PMN number or TME number, must be received on or before
January 16, 2004.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Director,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. How Can I Get Copies of this Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket identification (ID) number OPPT-2003-0069. The
official public docket consists of the documents specifically
referenced in this action, any public comments received, and other
information related to this action. Although a part of the official
docket, the public docket does not include Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute. The official public docket is the collection of materials
that is available for public viewing at the EPA Docket Center, Rm.
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington,
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The EPA Docket Center Reading
Room telephone number is (202) 566-1744 and the telephone number for
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing
[[Page 70257]]
copyrighted material, EPA will provide a reference to that material in
the version of the comment that is placed in EPA's electronic public
docket. The entire printed comment, including the copyrighted material,
will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the photograph
will be placed in EPA's electronic public docket along with a brief
description written by the docket staff.
C. How and to Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number and specific PMN number or TME number in
the subject line on the first page of your comment. Please ensure that
your comments are submitted within the specified comment period.
Comments received after the close of the comment period will be marked
``late.'' EPA is not required to consider these late comments. If you
wish to submit CBI or information that is otherwise protected by
statute, please follow the instructions in Unit I.D. Do not use EPA
Dockets or e-mail to submit CBI or information protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/
, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPPT-2003-0069. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov,
Attention: Docket ID Number OPPT-2003-0069 and PMN Number or TME
Number. In contrast to EPA's electronic public docket, EPA's e-mail
system is not an ``anonymous access'' system. If you send an e-mail
comment directly to the docket without going through EPA's electronic
public docket, EPA's e-mail system automatically captures your e-mail
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the
official public docket, and made available in EPA's electronic public
docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Document Control Office (7407M),
Office of Pollution Prevention and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
3. By hand delivery or courier. Deliver your comments to: OPPT
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number
OPPT-2003-0069 and PMN Number or TME Number. The DCO is open from 8
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930.
D. How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the technical person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the notice or collection
activity.
7. Make sure to submit your comments by the deadline in this
document.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action and the specific PMN number you are
commenting on in the subject line on the first page of your response.
You may also provide the name, date, and Federal Register citation.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
[[Page 70258]]
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from October 1, 2003 to November 28,
2003, consists of the PMNs, pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs, pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 149 Premanufacture Notices Received From: 10/1/03 to 11/28/03
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-04-0001 10/01/03 12/29/03 Toyo Color America, (S) Ultraviolet (S) Poly(oxy-1,2-
LLC curable additive for ethanediyl),.alpha.-
optical lens (1-oxo-2-propenyl)-
.omega.-([1,1'-
biphenyl]-2-yloxy)-
P-04-0002 10/01/03 12/29/03 Toyo Color America, (S) Ultraviolet (S) Hexanedioic acid,
LLC curable oligomer for polymer with 1,6-
optical lens diisocyanatohexane,
1,6-diisocyanato-
2,2,4-
trimethylhexane, 1,6-
diisocyanato-2,4,4-
trimethylhexane,
1,1'-[(1-
methylethylidene)bis
(4,1-
phenyleneoxy)]bis[2-
propanol] and 3-
methyl-1,5-
pentanediol, 2-hyd
roxyethyl acrylate-
blocked
P-04-0003 10/01/03 12/29/03 Toyo Color America, (S) Light stabilizer (S) 2-propenoic acid,
LLC additive for 2-methyl-, 1,2,2,6,6-
ultraviolet curable pentamethyl-4-
glue piperidinyl ester
P-04-0004 10/01/03 12/29/03 Toyo Color America, (S) Ultraviolet (S) Poly[oxy(methyl-
LLC curable additive for 1,2-
optical lens ethanediyl)],.alpha.
,.alpha'.-[(1-
methylethylidine)di-
4,1-
phenylene]bis[.omega
.-[(1-oxo-2-
propenyl)oxy]-
P-04-0005 10/01/03 12/29/03 CBI (S) Adhesion promoter (G) Aminosilane
in sealants;
coupling agent for
industrial coatings
P-04-0006 10/01/03 12/29/03 Brueggemann Chemical (G) Additive (G) Arylphosphine
U.S., Inc. copper iodide
P-04-0007 10/01/03 12/29/03 Meadwestvaco (S) Intermediate used (G) Modified
Corporation - for sterol saponified tall oil
Specialty Chemicals production distillates
Division
P-04-0008 10/02/03 12/30/03 Vantico Inc. (S) Epoxy curing (G) Phenol, 4,4'-(1-
agent methylethylidene)bis-
, polymer with
(chloromethyl)oxiran
e, reaction products
with an epoxide and
triethylenetetramine
P-04-0009 10/03/03 12/31/03 CBI (G) Petroleum (G) Alkylbenzene
lubricant additive sulfonic acid
P-04-0010 10/02/03 12/30/03 CBI (G) Developer for (G) Salicylic acid
thermal sensitive compound
paper
P-04-0011 10/03/03 12/31/03 E. I. Dupont De (G) Injection molded (G) Aromatic -
Nemours and Company, and extruded parts, aliphatic polyamides
Inc. films, ribbons,
tubes and filaments
for high heat
applications
P-04-0012 10/03/03 12/31/03 E. I. Dupont De (G) Injection molded (G) Aromatic -
Nemours and Company, and extruded parts, aliphatic polyamides
Inc. films, ribbons,
tubes and filaments
for high heat
applications
P-04-0013 10/03/03 12/31/03 E. I. Dupont De (G) Injection molded (G) Aromatic -
Nemours and Company, and extruded parts, aliphatic polyamides
Inc. films, ribbons,
tubes and filaments
for high heat
applications
P-04-0014 10/03/03 12/31/03 E. I. Dupont De (G) Injection molded (G) Aromatic -
Nemours and Company, and extruded parts, aliphatic polyamides
Inc. films, ribbons,
tubes and filaments
for high heat
applications
P-04-0015 10/03/03 12/31/03 Gardere Wynne Sewell (S) Carrier for (S) Alkanes, C8 12 -
LLP herbicides and branched
pesticides; paint
and ink
formulations; indoor
heating oil; solvent
blend
P-04-0016 10/06/03 01/03/04 CBI (G) Open, non- (G) Azo dyestuff
dispersive
(dyestuff)
P-04-0017 10/03/03 12/31/03 CBI (G) Low foaming (G) Octyl-d-glucoside
cleanser additive
[[Page 70259]]
P-04-0018 10/03/03 12/31/03 E. I. Dupont De (G) Intermediate (G) Salts of
Nemours and Company, aliphatic amine with
Inc. aromatic acid or
with mixed aromatic
and aliphatic acids
P-04-0019 10/03/03 12/31/03 E. I. Dupont De (G) Intermediate (G) Salts of
Nemours and Company, aliphatic amine with
Inc. aromatic acid or
with mixed aromatic
and aliphatic acids
P-04-0020 10/03/03 12/31/03 E. I. Dupont De (G) Intermediate (G) Salts of
Nemours and Company, aliphatic amine with
Inc. aromatic acid or
with mixed aromatic
and aliphatic acids
P-04-0021 10/03/03 12/31/03 E. I. Dupont De (G) Intermediate (G) Salts of
Nemours and Company, aliphatic amine with
Inc. aromatic acid or
with mixed aromatic
and aliphatic acids
P-04-0022 10/07/03 01/04/04 Cognis Corporation (G) Metal working (S) Fatty acids,
fluid C14 18 and C16 18
unsaturated-2-ethyl
hexyl esters
P-04-0023 10/07/03 01/04/04 Petroferm Inc. (S) Slip and leveling (G) Allyl alcohol
additive to ultra ethoxylate urethane
violet and eb-cured
inks, paints and
coatings; oligomer
in the manufacture
of polymeric
materials
P-04-0024 10/07/03 01/04/04 Petroferm Inc. (S) Slip and leveling (G) Peg urethane
additive to ultra
violet and eb-cured
inks, paints and
coatings; oligomer
in the manufacture
of polymeric
materials
P-04-0025 10/07/03 01/04/04 CBI (G) Industrial (G) Aminated
coatings binder styrenate acrylic
salt
P-04-0026 10/07/03 01/04/04 Petroferm Inc. (S) Slip and leveling (G) Combed silicone
additive to ultra urethane
violet and eb-cured
inks, paints and
coatings; oligomer
in the manufacture
of polymeric
materials
P-04-0027 10/07/03 01/04/04 Petroferm Inc. (S) Slip and leveling (G) Linear silicone
additive to ultra urethane
violet and eb-cured
inks, paints and
coatings; oligomer
in the manufacture
of polymeric
materials
P-04-0028 10/07/03 01/04/04 CBI (G) Intermediate for (G) Methylene di
an electrical (phenylene
insulating coating isocyanate) polymer
with substituted
propanol and
secondary butyl
phenol
P-04-0029 10/08/03 01/05/04 CBI (S) Binder in hot (G) Cyclic diamine
melt inks bisamide with
monocarboxylic fatty
acids
P-04-0030 10/08/03 01/05/04 CBI (S) Binder in hot (G) Cyclic diamine
melt inks bisamide with
monocarboxylic fatty
acids
P-04-0031 10/08/03 01/05/04 BASF Corporation (G) Component used in (G) Hexanedioic acid,
the manufacture of polymer with
polyurethane parts aliphatic diols and
diisocyanate
P-04-0032 10/09/03 01/06/04 CBI (G) Papermaking (G) Aminopolyamide
Chemical, non- resin
dispersive use
P-04-0033 10/09/03 01/06/04 CBI (G) Destructive use (G) Hindered phenolic
ester
P-04-0034 10/09/03 01/06/04 Bp Amoco Chemical (G) Grease thickener (G) Lithium grease
Company Inc. thickener
P-04-0035 10/09/03 01/06/04 CBI (G) Paper making (G) Cross-linked
chemical aminopolyamide resin
P-04-0036 10/10/03 01/07/04 CBI (G) Ingredients for (G) Heterocycle (oxa,
use in consumer thia, aza)
products: highly
dispersive
P-04-0037 10/10/03 01/07/04 CBI (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesives polymer
P-04-0038 10/10/03 01/07/04 CBI (G) Additive for (G) Acrylic polymer
plastics
P-04-0039 10/10/03 01/07/04 CBI (G) Chemical (G)
intermediate Hydroxycycloalkanone
P-04-0040 10/14/03 01/11/04 CBI (S) Surfactant for (G) Polyethylene
metal finishing glycol benzyl alkyl
baths ether
P-04-0041 10/14/03 01/11/04 CBI (G) Fixing agent (G) Polymeric amine
P-04-0042 10/14/03 01/11/04 CBI (G) Fixing agent (G) Polymeric amine
P-04-0043 10/15/03 01/12/04 CBI (G) A component of a (G) Epoxy amine
pigmented epoxy adduct
resin for coating
and surfacing
P-04-0044 10/15/03 01/12/04 CBI (G) Lubricant base (G) Fatty acid esters
fluid with neopentyl
glycol
P-04-0045 10/15/03 01/12/04 CBI (G) Coating binder (G) Epoxy-acrylic
copolymer
P-04-0046 10/17/03 01/14/04 CBI (G) Dispersant (G) Polyether
carboxylate
P-04-0047 10/17/03 01/14/04 CBI (G) Dispersant (G) Polyether
carboxylate
P-04-0048 10/17/03 01/14/04 CBI (G) Dispersant (G) Polyether
carboxylate
[[Page 70260]]
P-04-0049 10/17/03 01/14/04 CBI (G) Dispersant (G) Polyether
carboxylate
P-04-0050 10/17/03 01/14/04 CBI (G) Laminating (G) Polyurethane
adhesive
P-04-0051 10/17/03 01/14/04 CBI (G) Destructive use (G) Substituted
aluminoxane
P-04-0052 10/17/03 01/14/04 CBI (G) Open, non- (G) Cationic
dispersive (resin) polyacrylamide
P-04-0053 10/17/03 01/14/04 Toyo Color America, (S) Ultra violet (S) 2-propenoic acid,
LLC curable monomer for 1,9-nonanediyl ester
optical lens
P-04-0054 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional
Environmental Health coating, ink acrylate oligomer
and Safety resin
P-04-0055 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional
Environmental Health coating, ink acrylate oligomer
and Safety resin
P-04-0056 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional
Environmental Health coating, ink acrylate oligomer
and Safety resin
P-04-0057 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional
Environmental Health coating, ink acrylate oligomer
and Safety resin
P-04-0058 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional
Environmental Health coating, ink acrylate oligomer
and Safety resin
P-04-0059 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional
Environmental Health coating, ink acrylate oligomer
and Safety resin
P-04-0060 10/21/03 01/18/04 CBI (G) Coating component (G) Substituted metal
complex
P-04-0061 10/21/03 01/18/04 CBI (G) Coating component (G) Substituted metal
complex
P-04-0062 10/21/03 01/18/04 CBI (G) Coating component (G) Modified metal
complex
P-04-0063 10/21/03 01/18/04 CBI (G) Adhesive-closed (G) Aromatic
system copolyamic acid
P-04-0064 10/21/03 01/18/04 CBI (S) Inks; coatings (G) Polyester
acrylate
P-04-0065 10/21/03 01/18/04 CBI (G) Surfactant (G) Alkylammonium
ether sulfate
P-04-0066 10/22/03 01/19/04 CBI (G) Coatings, (G) Polybutadiene
adhesives and acrylate
printing plates
P-04-0067 10/22/03 01/19/04 CBI (G) Coatings, (G) Polybutadiene
adhesives and acrylate
printing plates
P-04-0068 10/22/03 01/19/04 CBI (S) Ingredient in (S) 3-pentanol, 2,2,4-
fragrance compound trimethyl-1-[(2-
methyl-2-
propenyl)oxy]-
P-04-0069 10/23/03 01/20/04 CBI (G) Adhesion promoter (G) Acid modified
for coatings chlorinated
polyolefin
P-04-0070 10/23/03 01/20/04 CBI (G) Additive, open, (G) Polyether fatty
non-dispersive acid ester
P-04-0071 10/23/03 01/20/04 CBI (G) Additive, open, (G) Silicone
non-dispersive containing acidic
polyester
P-04-0072 10/23/03 01/20/04 CBI (G) Additive, open, (G) Acidic polyester
non-dispersive
P-04-0073 10/23/03 01/20/04 The Dow Chemical (S) Ultra violet (G) Vinyl ester of
Company curable resin for epichlorohydrin/
coatings bisphenol-a polymer
P-04-0074 10/23/03 01/20/04 The Dow Chemical (S) Ultra violet (G) Vinyl ester of
Company curable resin for epichlorohydrin/
coatings bisphenol-a polymer
P-04-0075 10/24/03 01/21/04 CBI (S) Viscosity (G) Modified aluminum
modifier for the alkoxide
manufacture of ink
vehicles
P-04-0076 10/27/03 01/24/04 CBI (G) Resin coating (G) Polyester
acrylate
P-04-0077 10/27/03 01/24/04 CBI (G) Polymer material (G) Acrylic copolymer
for pigment
P-04-0078 10/27/03 01/24/04 CBI (G) Polymer material (G) Acrylic copolymer
for pigment
P-04-0079 10/27/03 01/24/04 CBI (S) Monomer used in (G) Halogen-
the production of substituted oxetane
reactive polymers
for surface coating
materials and other
polymer
intermediates [open /
non-dispersive use]
P-04-0080 10/27/03 01/24/04 CBI (S) Monomer used in (G) Halogen-
the production of substituted oxetane
reactive polymers
for surface coating
materials and other
polymer
intermediates [open /
non-dispersive use]
P-04-0081 10/27/03 01/24/04 CBI (S) Thickness and (G) Polyalkylene
rheology modifiers glycol, alkyl ether,
for emulsion paint reaction products
with
diisocyanatoalkane
and polyalkylene
glycol
[[Page 70261]]
P-04-0082 10/27/03 01/24/04 CBI (S) Thickness and (G) Polyalkyene
rheology modifiers glycol, alkyl ether,
for emulsion paint reaction products
with
diisocyanatoalkane
and polyalkylene
glycol
P-04-0083 10/27/03 01/24/04 CBI (S) Water proofing (S) Amines, N-C16 22-
for fibersheets alkyltrimethylenedi-
P-04-0084 10/28/03 01/25/04 CBI (G) Component of (G) Substituted
paper or plastic acrylate polymer
coating
P-04-0085 10/28/03 01/25/04 CBI (S) Thickener for (G) Acrylic-
coating Colors acrylonitrile
applied to paper and copolymer
paperboard
P-04-0086 10/28/03 01/25/04 CBI (G) Industrial (G) C16 18 fatty acid
corrosion inhibitor product with
polyethylene,
phosphonomethylated
P-04-0087 10/28/03 01/25/04 CBI (S) Siloxane polymer (G) Blocked siloxane
used as a raw polymer
material in
photoresist
P-04-0088 10/29/03 01/26/04 Shin-Etsu silicones (S) Sealant (G) Silicone modified
of America Inc. acrylic polymer
P-04-0089 10/29/03 01/26/04 CIBA Specialty (S) Photoinitiator (G) Aromatic compound-
Chemicals for overprint photoinitiator
Corporation varnishes and
printing inks
P-04-0090 10/29/03 01/26/04 CBI (G) Rust inhibition (G) Triazine
reagent derivative
P-04-0091 10/29/03 01/26/04 R. T. Vanderbilt (S) Anti-wear and (S) Carbamodithioic
Company, Inc. antioxidant additive acid, dipentyl-,
for lubricants, compound with n-
especially greases pentyl-1-pentanamine
(1:1)
P-04-0092 10/29/03 01/26/04 R. T. Vanderbilt (S) Anti-wear and (S) Carbamodithioic
Company, Inc. antioxidant additive acid, bis(2-
for lubricants, ethylhexyl)-,
especially greases compound with 2-
ethyl-n-(2-
ethylhexyl)-1-
hexanamine (1:1)
P-04-0093 10/29/03 01/26/04 R. T. Vanderbilt (S) Anti-wear and (G) Dialkylamine
Company, Inc. antioxidant additive dialkyldithiocarbama
for lubricants, te
especially greases
P-04-0094 10/29/03 01/26/04 R. T. Vanderbilt (S) Anti-wear and (S) Carbamodithioic
Company, Inc. antioxidant additive acid, ditridecyl-,
for lubricants, branched, compounds
especially greases with branched n-
tridecyl-1-
tridecanamine
P-04-0095 10/29/03 01/26/04 CBI (G) Open, non- (G) Polyurethane
dispersive (resin) dispersion
P-04-0096 10/30/03 01/27/04 CBI (G) Reactive additive (G) Functionalized
for a coating diether
formulation
P-04-0097 10/31/03 01/28/04 Zeon Chemicals L.P. (S) Polymerization (G) Cycloaliphatic
monomer ester
P-04-0098 10/31/03 01/28/04 CBI (G) Resin coating (G) Urethane acrylate
P-04-0099 10/31/03 01/28/04 Engelhard Corporation (G) Intermediate (G) Intermediate for
diazo yellow pigment
P-04-0100 11/03/03 01/31/04 CBI (G) Open, non- (G) Fatty acid amide
dispersive (bulking amine
agent)
P-04-0101 11/03/03 01/31/04 CBI (G) Emulsifier (G) Polyolefin
aminoester
P-04-0102 11/03/03 01/31/04 Degussa Corporation (S) Coating systems (G) Aqueous ketone-
and printing inks aldehyde resin
P-04-0103 11/03/03 01/31/04 CBI (S) Automotive (G)
industry Cycloaliphaticdiisoc
yanate, homopolymer,
compound with
alkanedioic acid
ester
P-04-0104 10/31/03 01/28/04 Johnson Polymer (G) Polymeric coating (G) Acrylic copolymer
vehicle
P-04-0105 11/04/03 02/01/04 CBI (G) Water removal and (G) Alkyl oxirane -
drag reduction for epichlorohydrin -
transport of liquids alkyl bis(phenol) -
and gases polyhydroxy polyol
P-04-0106 11/04/03 02/01/04 Transmare Houston (S) Carrier for (S) Alkanes, C8 12-
Inc. herbicides and branched and linear
pesticides; paint
and ink
formulations; indoor
heating oil; solvent
blend for cleaning
P-04-0107 11/05/03 02/02/04 Eastman Kodak Company (G) Contained use in (G) Substituted amino
digital and imaging ethane sulfonic acid
products salt
P-04-0108 11/05/03 02/02/04 Conocophillips (S) Olefin (G) Naphtha
Company manufacturing
feedstock; Specialty
solvents; alcohol
denaturant; fuel
blendstock
P-04-0109 11/06/03 02/03/04 CBI (G) Reactant in (G) Amine prepolymer
thermoset coating or
adhesive
formulation; degree
of containment ---
(c) open, non-
dispersive use
P-04-0110 11/06/03 02/03/04 Archer Daniels (S) Co-adhesive for (S) Linseed oil,
Midland Company composite panel conjugated
products
P-04-0111 11/06/03 02/03/04 CBI (S) Plasticizer for (G) Polycarboxylated
concrete and cement ether
P-04-0112 11/10/03 02/07/04 CBI (G) Open non- (G) Polyester
dispersive (resin) polyurethane resin
P-04-0113 11/10/03 02/07/04 CBI (G) Open non- (G) Acrylic acid
dispersive (acrylate ester
resin)
[[Page 70262]]
P-04-0114 11/10/03 02/07/04 International flavors (S) Raw material for (S) 94-98%indeno[4,4-
and; Fragrances Inc. use in fragrances d]-1,3-dioxin, 4,
for soaps, 4a, 5, 6, 7, 8, 9,
detergents, cleaners 9b-octahydro-
and other household 7,7,8,9,9-
products pentamethyl
P-04-0115 11/07/03 02/04/04 Zeon Chemicals L.P. (S) Electron beam (S) 2-propenoic acid,
resist in the 2-chloro-, methyl
manufacture of ic ester, polymer with
chips and masks via (1-
microlithography methylethenyl)benzen
processes e
P-04-0116 11/12/03 02/09/04 CBI (G) Coating resin for (G) Amino alkyl
open, no-dispersive alcohol modified
use fluoropolymer
P-04-0117 11/12/03 02/09/04 BASF Corporation (S) Additive for ink (S) 1,2-pentanediol
jet printing inks
P-04-0118 11/12/03 02/09/04 Invista Inc. (S) Intermediate for (G) Triamine adipate
polymer manufacture salt
P-04-0119 11/12/03 02/09/04 Invista Inc. (G) Polymer for fiber (G) Aliphatic
polyamide
P-04-0120 11/12/03 02/09/04 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-04-0121 11/10/03 02/07/04 CBI (G) Laminating (G) Polyurethane
adhesive
P-04-0122 11/13/03 02/10/04 CBI (G) Rubber elastomer (G) Mdi/carbonate
for tires, wheels, prepolymer
rolls and other
Specialty urethane
applications
P-04-0123 11/13/03 02/10/04 CBI (G) Rubber elastomer (G) Ppdi/carbonate/
for tires, wheels, caprolactone/ether
rolls and other prepolymer
Specialty urethane
applications
P-04-0124 11/14/03 02/11/04 CBI (G) Controlled (G) Polymethylene
release of catalyst polyphenylene
polyurea polymer
P-04-0125 11/17/03 02/14/04 CIBA Specialty (S) Exhaust dyeing of (G) Reaction products
Chemicals cellulosic fibers of substituted
Corporation, Textile benzenesulfonic acid
Effects azo substituted
phenyl amino
compound and
substituted amino
phenyl compound
P-04-0126 11/17/03 02/14/04 CBI (S) Flame retardant (G) Diphosphoric
for plastic articles acid, amine salt
P-04-0127 11/18/03 02/15/04 CBI (G) Fuel additive (G) Polyether/
allylphenol modified
siloxane
P-04-0128 11/19/03 02/16/04 Eastman Kodak Company (G) Contained use in (G) Heterocyclic
an article substituted butanoic
acid ester
P-04-0129 11/18/03 02/15/04 Ashland Inc., (G) Raw material in (G) Multifunctional
Environmental Health higher molecular acrylate oligomer
and; Safety weight polymer resin
product
P-04-0130 11/17/03 02/14/04 CBI (G) Viscosity index (G) Alkyl
improver methacrylates
copolymer
P-04-0131 11/20/03 02/17/04 CBI (G) Open, non- (G) Blocked
dispersive use isocyanate resin
P-04-0132 11/20/03 02/17/04 CBI (G) Additive for (G) Ethylhexyl
industrial oxetane
applications
P-04-0133 11/19/03 02/16/04 CBI (S) Dispersing and (G) Polyester
wetting agent polyamide
P-04-0134 11/20/03 02/17/04 CIBA Specialty (S) Continuous dyeing (G) Reaction products
Chemicals of nylon carpet of substituted amino
Corporation, Textile anthracenesulfonic
effects acid and substituted
triazine amino
phenyl compound
P-04-0135 11/21/03 02/18/04 CBI (G) Open non- (G) Polyester
dispersive urethane
(polyurethane
lacquer)
P-04-0136 11/21/03 02/18/04 CBI (S) Production of (G) Polyetherimide
molded or extruded polymer
articles or as
component of other
industrial products
P-04-0137 11/21/03 02/18/04 CBI (G) Emulsifier for (G) Polyalkylene
emulsion glycol alkyl ether
polymerization sulfate, reaction
products with allyl
glycidyl ether,
ammonium salt
P-04-0138 11/21/03 02/18/04 CBI (G) Component of (G) Substituted
paper or plastic acrylate polymer
coating
P-04-0139 11/24/03 02/21/04 CBI (G) Additive for (G) Modified
various cleaners amidoamine
P-04-0140 11/24/03 02/21/04 CBI (G) Additive for (G) Fatty acid ester
cleaning products salt
P-04-0141 11/24/03 02/21/04 CBI (G) Additive for (G) Modified
various cleaners aminoamine
P-04-0142 11/24/03 02/21/04 CBI (G) Additive for (G) Modified
various cleaners amidoamine
P-04-0143 11/24/03 02/21/04 CBI (G) Additive for (G) Modified
various cleaners amidoamine
P-04-0144 11/24/03 02/21/04 CBI (G) Chemical (G) Modified
intermediate; amidoamine
destructive use
P-04-0145 11/24/03 02/21/04 CBI (G) Open non- (G) Polyisocyanate
dispersive (coating
material)
P-04-0146 11/25/03 02/22/04 Solvay Fluorides, (S) Flux for brazing (S) Potassium zinc
Inc. aluminum fluoride
P-04-0147 11/25/03 02/22/04 CBI (G) Chemical (S) Hydroxylamine, o-
intermediate [(2e)-3-chloro-2-
propyl]-
[[Page 70263]]
P-04-0148 11/25/03 02/22/04 CBI (G) Paraffin (G) Olefin - maleic
inhibitor anhydride esterified
polymer
P-04-0149 11/25/03 02/22/04 Invista Inc. (G) Polymer for fiber (G) Aliphatic
polyamide
P-04-0150 11/25/03 02/22/04 CBI (S) Fertilizer for (S) Seaweed extract
turf and crops (saragassum
thumbergii)
P-04-0151 11/25/03 02/22/04 CBI (S) Bicyclic tertiary (G) Bicylic tertiary
amine salt used as a amine salt
photoresist
component
P-04-0152 11/28/03 02/25/04 CBI (G) Resin coating (G) Polyester
acrylate
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 80 Notices of Commencement From: 10/01/03 to 11/28/03
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-00-0119 11/12/03 10/10/03 (G) Polyol ester
P-00-0157 11/17/03 10/17/03 (G) Organo silane ester
P-00-0406 10/08/03 03/26/01 (G) Calcium fatty acid
complex
P-00-0900 10/06/03 09/12/03 (G) Polyalkene, sulfonated
P-00-0901 10/06/03 09/17/03 (G) Polyalkylene
sulfonate, salts
P-01-0292 10/20/03 10/10/03 (S) Silane,
trimethoxyoctyl-
P-01-0527 10/29/03 10/09/03 (G) Polyester polyol
P-01-0637 11/20/03 11/10/03 (G) Polyurethane resin
P-01-0728 11/03/03 10/14/03 (G) Oligomeric ester,
capped with iso-alcohols
P-01-0790 11/04/03 10/10/03 (G) Aluminum alkoxide
complex
P-02-0587 10/23/03 10/08/03 (G) Polyester polyether
isocyanate
P-02-0693 10/01/03 09/15/03 (G) Saturated hydrocarbon
P-02-0795 11/17/03 10/26/03 (G) Copolymer
P-02-0797 11/17/03 10/26/03 (G) Copolymer
P-02-0873 10/28/03 10/01/03 (G) Polyurethane
prepolymer
P-02-1013 11/05/03 07/24/03 (G) Modified polyvinyl
butyral
P-03-0007 11/18/03 09/04/03 (G) Alkyl cinnamic
aldehyde
P-03-0035 11/25/03 10/27/03 (G) Alkene acrylate
copolymer
P-03-0045 11/05/03 09/30/03 (S) Glycerides, soya mono-
and di-, phosphates,
sodium salts
P-03-0047 11/26/03 11/11/03 (S) Benzenemethanaminium,
n-(3-aminopropyl)-n,n-
dimethyl-, n-soya acyl
derivs., chlorides
P-03-0176 10/10/03 09/11/03 (G) Urethane acrylate
P-03-0181 11/25/03 10/27/03 (G) Amino resin modified
polyether polyurethane
P-03-0182 10/29/03 10/03/03 (G) Polysulfonated dpo/
diphone
P-03-0194 10/21/03 09/30/03 (G) Bis[phenyl, 2h-1,3-
benzoxazine] derivative
P-03-0227 10/07/03 09/09/03 (G) Substituted phenolic
resin
P-03-0258 10/07/03 09/26/03 (S) 2,5-furandione,
dihydro-3-[3-
(triethoxysilyl)propyl]-
P-03-0276 10/31/03 10/16/03 (G) Polyalkylenecarbonate
diol
P-03-0277 10/31/03 10/16/03 (G) Polyalkylenecarbonate
diol
P-03-0301 10/07/03 09/29/03 (G) Vinyl acrylic emulsion
polymer
P-03-0329 11/06/03 10/21/03 (G) Trialkylamine salt of
substituted
alkyarylpolyurethane
P-03-0343 10/17/03 09/12/03 (G) Acrylic polymer
P-03-0344 10/17/03 09/30/03 (G) Acrylic polymer
P-03-0362 10/28/03 10/23/03 (G) Thionocarbamate
derivative or modified
thionocarbamate
P-03-0423 10/17/03 10/01/03 (G) Modified polyol
P-03-0438 11/21/03 11/09/03 (G) Polyether modified
polyurethane urea
P-03-0439 10/07/03 10/01/03 (G) Polyether modified
polyurethane urea
P-03-0451 11/14/03 10/27/03 (G) Silicone polyether
P-03-0478 10/08/03 09/29/03 (G) Substituted -9,10-
dihydro-9,10-dioxo-
anthracentyl-phenylhalo
compound
P-03-0479 10/08/03 09/29/03 (G) Substituted -9,10-
dihydro-9,10-dioxo-
anthracentyl-phenylhalo
compound
P-03-0480 10/08/03 09/29/03 (G) Substituted -9,10-
dihydro-9,10-dioxo-
anthracentyl-phenylhalo
compound
P-03-0484 11/12/03 10/24/03 (G) Fatty ester
P-03-0502 11/18/03 10/31/03 (S) Benzene, ethenyl-,
polymer with cyclopentene
and 1,3-pentadiene
P-03-0518 11/20/03 11/06/03 (G) Acrylic polymer
P-03-0528 11/12/03 10/19/03 (G) 2-propenoic acid, 2-
methyl-, polymer with 1,2-
ethanediyl bis(2-methyl-2-
propenoate), 2-ethyl-2-
[[(2-methyl-1-oxo-2-
propenyl)oxy]methyl]-1,3-
propanediyl bis(2-methyl-
2-propenoate) and methyl
2-methyl-2-propenoate,
compound with-imidazole
P-03-0530 10/10/03 09/11/03 (G) Salt of a
polyalkylenepolyamine
derivative
P-03-0531 10/10/03 09/11/03 (G) Salt of mixed fatty
amidoamines
[[Page 70264]]
P-03-0536 11/06/03 10/21/03 (G) Polymer of substituted
allylamine
P-03-0554 10/08/03 09/10/03 (G) Polyurethane
P-03-0555 10/15/03 10/03/03 (G) Isocyanate functional
polyester polyether
urethane polymer
P-03-0563 11/25/03 10/29/03 (S) 2-propenoic acid, 2-
methyl-, 2-
ethyltricyclo[3.3.1.13,7]
dec-2-yl ester
P-03-0565 11/25/03 11/20/03 (S) 2-propenoic acid, 2-
methyltricyclo[3.3.1.13,7
]dec-2-yl ester
P-03-0573 10/28/03 10/24/03 (G) Polyester resin
P-03-0581 10/08/03 09/24/03 (G) Telechelic
polyacrylate
P-03-0583 10/10/03 09/11/03 (G) Polyurethane
P-03-0584 11/18/03 11/05/03 (G) Urethane acrylate
P-03-0585 10/07/03 09/27/03 (S) 1,3-benzenedisulfonic
acid, 4-[bis[4-
(diethylamino)phenyl]meth
yl]-6-hydroxy-
P-03-0588 11/26/03 11/02/03 (G) Polycarboxylate
polymer with
alkenyloxyalkylol
modified
poly(oxyalkylenediyl),
calcium sodium salt
P-03-0590 10/16/03 10/08/03 (S) 1-hexanol, 3-mercapto-
P-03-0609 11/17/03 11/04/03 (G) Oligomer of aromatic,
alkyl amines and alkyl
epoxide
P-03-0613 11/12/03 10/07/03 (G) Modified
diaryliodoniumhexafluoroa
ntimonate
P-03-0623 11/21/03 10/29/03 (G) Amino epoxy silane
P-03-0635 11/04/03 10/09/03 (G) Acrylate,
acrylonitrile, butadiene
rubber-extended epoxy
resin polymer
P-03-0636 10/15/03 10/02/03 (G) Epoxy acrylate
oligomer
P-03-0644 10/10/03 10/02/03 (G) Acrylate ester
P-03-0646 10/15/03 09/23/03 (G) Cationic amine salt
epoxy resin
P-03-0648 10/30/03 10/10/03 (S) 2-propenoic acid, 2-
methyl-, 1,2-ethanediyl
ester, polymer with butyl
2-methyl-2-propenoate
P-03-0651 10/15/03 10/03/03 (G) Polyurethane
P-03-0656 10/06/03 09/24/03 (S) Fatty acids, sunflower-
oil, esters with
propylene glycol
P-03-0666 11/04/03 10/27/03 (G) Distillation residue
from glycol production
P-03-0678 11/17/03 10/21/03 (G) Styrene-acrylic
copolymer
P-03-0714 11/25/03 11/13/03 (G) Aluminum alkoxide
complex
P-03-0722 10/30/03 10/22/03 (G) Pyrazolone derivative
P-03-0729 11/18/03 11/10/03 (G) Alkyleneoxide
derivatives
P-03-0731 11/24/03 10/23/03 (G) Polypropylene glycol,
polymer with a
carbomonocyclic
diisocyanate, substituted-
trialkoxysilane-blocked
P-03-0733 11/12/03 11/04/03 (G) Aspartic ester
P-92-0353 10/28/03 10/01/03 (G) Substituted
polyhydroxy aromatic
compound
P-98-0777 11/05/03 10/13/03 (S) Mixture of: alpha-d-
glucopyranoside, ,1-6-bis-
o-(1-oxooctyl)-b-d-
fructofuranosyl and alpha-
d-glucopyranoside, 6-o-(1-
oxooctyl)-b-d-
fructofuranosyl
P-98-0943 11/12/03 10/27/03 (G) Substituted-[(1,2,3,4-
tetrahydro-5,8-dihydroxy-
1,4-methanonaphthalene -
6,7-
diyl)bis(methylene)]bis
P-99-0916 10/15/03 09/30/03 (G) Telogen, telomer with
alkenes and alkenyl
acetate
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: December 4, 2003.
Anthony Cheatham,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E3-00565 Filed 12-16-03; 8:45 am]
BILLING CODE 6560-50-S