[Federal Register: December 8, 2004 (Volume 69, Number 235)]
[Notices]
[Page 71049-71054]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr08de04-79]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2004-0129; FRL-7690-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from October 18, 2004 to November 9, 2004, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
DATES: Comments identified by the docket ID number OPPT-2004-0129 and
the specific PMN number or TME number, must be received on or before
January 7, 2005.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. How Can I Get Copies of this Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket identification (ID) number OPPT-2004-0129. The
official public docket consists of the documents specifically
referenced in this action, any public comments received, and other
information related to this action. Although a part of the official
docket, the public docket does not include Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute. The official public docket is the collection of materials
that is available for public viewing at the EPA Docket Center, Rm.
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington,
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The EPA Docket Center Reading
Room telephone number is (202) 566-1744 and the telephone number for
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide a reference to that
material in the version of the comment that is placed in EPA's
electronic public docket. The entire printed comment, including the
copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the photograph
will be placed in EPA's electronic public docket along with a brief
description written by the docket staff.
C. How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number and specific PMN number or TME number in
the subject line on the first page of your comment. Please ensure that
your comments are submitted within the specified comment period.
Comments received after the close of the comment period will be marked
``late.'' EPA is not required to
[[Page 71050]]
consider these late comments. If you wish to submit CBI or information
that is otherwise protected by statute, please follow the instructions
in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or
information protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/
, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPPT-2004-0129. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov,
Attention: Docket ID Number OPPT-2004-0129 and PMN Number or TME
Number. In contrast to EPA's electronic public docket, EPA's e-mail
system is not an ``anonymous access'' system. If you send an e-mail
comment directly to the docket without going through EPA's electronic
public docket, EPA's e-mail system automatically captures your e-mail
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the
official public docket, and made available in EPA's electronic public
docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Document Control Office (7407M),
Office of Pollution Prevention and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
3. By hand delivery or courier. Deliver your comments to: OPPT
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number
OPPT-2004-0129 and PMN Number or TME Number. The DCO is open from 8
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930.
D. How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the technical person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the notice or collection
activity.
7. Make sure to submit your comments by the deadline in this
document.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action and the specific PMN number you are
commenting on in the subject line on the first page of your response.
You may also provide the name, date, and Federal Register citation.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from October 18, 2004 to November 9,
2004, consists of the PMNs pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
[[Page 71051]]
I. 80 Premanufacture Notices Received From: 10/18/04 to 11/09/04
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-05-0042 10/19/04 01/16/05 CBI (S) Polymerization (S) 1,1,3,3-
initiator for polyol tetramethylbutyl
production peroxy-2-
ethylhexanoate
P-05-0043 10/19/04 01/16/05 CBI (G) Open, non- (G) Copper
dispersive phthalocyanine
(dyestuff) sulfonic acid salt
P-05-0044 10/20/04 01/17/05 Surface Specialties, (S) Resin for water (G) Urethane modified
Inc. based paints polycarboxylic resin
P-05-0045 10/21/04 01/18/05 Surface Specialties, (S) Resin for paints (G) Hydroxy
Inc. functional
polyacrylate resin
P-05-0046 10/21/04 01/18/05 CBI (G) Protective films (G) 4,4' methylene
and coatings diphenyl
diisocyanate based
polyurethane polymer
P-05-0047 10/21/04 01/18/05 Surface Specialties, (S) Elasticity agent (G) Stabilized
Inc. for printing inks aluminum alcoholate
P-05-0048 10/21/04 01/18/05 CBI (G) Additive to (G) Phthalocyanine
pigments for compound
automobile paint
P-05-0049 10/22/04 01/19/05 CBI (G) Additive for (G) Diglycidyl
adhesives bisphenol a adduct
P-05-0050 10/22/04 01/19/05 Firmenich Inc. (S) Isolated (S) Benzene, (3,3-
intermediate dimethoxy-2-
methylpropyl)-
P-05-0051 10/25/04 01/22/05 CBI (G) Laminating (G) Polyester-
adhesive polyurethane resin
P-05-0052 10/25/04 01/22/05 Wacker Silicones a (S) Additive for (G)
Division of Wacker plastics and rubbers Polydimethylsiloxane
Chemical Corporation polymethyl
methacrylate
polyglycidyl
methacrylate graft
copolymer
P-05-0053 10/25/04 01/22/05 CBI (G) Surfactant/ (G) Formic acid,
dispersant compound with
(chloromethyl)oxiran
e polymer with
alykyldiamine, 4,4'-
(1-
methylethylidene)bis
[phenol] and
tetradecyloxirane,
acetate (salt)
P-05-0054 10/25/04 01/22/05 CBI (G) Industrial (G) Neodecanoic acid,
coatings binder 1,6-
hexanediylbis[imino(
2-hydroxy-3,1-
propanediyl)] ester,
polymer with
(chloromethyl)oxiran
e, alkyldiamine,
4,4'-(1-
methylethylidene)bis
[phenol] and 2,2'-
[(1-
methylethylidene)bis
(4,1-
phenyleneoxymethylen
e)]bis[oxira ne],
reaction products
with diethanolamine,
acetates (salts)
formates (salts)
P-05-0055 10/25/04 01/22/05 Firmenich Inc. (S) Isolated (S) Benzenepropanal,
intermediate .alpha.-methyl-
P-05-0056 10/25/04 01/22/05 CBI (G) Open non- (G) Lanthanum
dispersive (cathode manganese strontium
additive) oxide
P-05-0057 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-05-0058 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-05-0059 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-05-0060 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate
P-05-0061 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-05-0062 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-05-0063 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-05-0064 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-05-0065 10/26/04 01/23/05 CBI (G) Contained use in (G) Ether amine
energy production phosphonate salt
P-05-0066 10/27/04 01/24/05 CBI (S) Clear wood (G) Polyester
finishes polyurethane
P-05-0067 10/27/04 01/24/05 DIC International (G) Hard coating for (G) Fatty acids
(USA), Inc. plastics dimers, polymer with
alkoxylated phenol,
hydroxy ester
acrylate, cyclohexyl
isocyanate and
cyclic carboxylic
acid.
P-05-0068 10/27/04 01/24/05 CBI (G) Fuel additive (G) Cerium-based
organic compound
P-05-0069 10/28/04 01/25/05 CBI (S) Masonry water (G) Alkyl modified
repellant coating polysiloxane
copolymer
[[Page 71052]]
P-05-0070 10/28/04 01/25/05 CBI (S) Masonry water (G) Alkyl modified
repellant coating polysiloxane
P-05-0071 10/28/04 01/25/05 CBI (G) Industrial (G) Telechelic
structural materials polyacrylates
P-05-0072 10/28/04 01/25/05 CBI (G) Coating component (G) Polymer of
acrylate and
methacrylate esters
P-05-0073 11/01/04 01/29/05 CBI (G) Destructive use (G) Substituted
maleimide
P-05-0074 11/01/04 01/29/05 CBI (G) Destructive use (G) Maleimide
urethane oligomer
P-05-0075 11/01/04 01/29/05 CBI (G) Textile chemical (G)
Perfluoroalkylethyl
methacrylate
copolymer
P-05-0076 11/01/04 01/29/05 CBI (G) Destructive use (G) Substituted
maleimide
P-05-0077 11/01/04 01/29/05 Chemical (S) Hydrophilic (S) Siloxanes and
Technologies, LLC textile finish Silicones, di-me, 3-
hydroxypropyl me,
ethers with
polyethylene glycol
and polyethylene
glycol mono(2-
carboxyethyl) ether,
polymers with 1,1'-
methylenebis[4-
isocyanatocyclohexan
e]
P-05-0078 11/01/04 01/29/05 KAO Specialties (S) Emulsifier in (S) Amides, rape-oil,
Americas LLC metalworking fluids; n-
thickener and foam (hydroxyethyl),ethox
booster in ylated
dishwashing agent
and car shampoo
P-05-0079 11/02/04 01/30/05 CBI (G) Closed, non- (G) Potassium salt of
dispersive; pigment substituted arylazo
modifier butanamide
P-05-0080 11/03/04 01/31/05 CBI (S) Lubricant base (G) Chemical 1:
oil sales Paraffinic light
base oil
P-05-0081 11/03/04 01/31/05 CBI (S) Lubricant base (G) Paraffinic heavy
oil sales base oil
P-05-0082 11/03/04 01/31/05 CBI (S) Diesel blending; (G) Hydrotreated
note: % of substance middle distillate
expected per use are
approximate figures
P-05-0083 11/03/04 01/31/05 CBI (S) Sales as refinery (G) Light catalytic
feed; refinery cracked distillate
feedstock
P-05-0084 11/03/04 01/31/05 CBI (S) Diesel blending; (G) Hydrocracked
note: % of substance light distillate
expected per use are
approximate figures
P-05-0085 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Hydrotreated
light distillate
P-05-0086 11/03/04 01/31/05 CBI (S) Diesel blending; (G) Hydrocracked
cat cracker feed; heavy distillate
note: % of substance
expected per use for
diesel blending are
aproximate figures
P-05-0087 11/03/04 01/31/05 Firmenich Inc. (S) Aroma for use in (S) Spiro[5.5]undec-8-
fragrance mixtures, en-1-ol, 2,2,9,11-
which in turn are tetramethyl-,
used in perfumes, acetate
soaps, cleansers,
etc.
P-05-0088 11/03/04 01/31/05 CBI (S) Refinery (G) Branched and
feedstock linear hydrocarbons
P-05-0089 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Reformate
naphtha, full range
P-05-0090 11/03/04 01/31/05 CBI (S) Refinery feed to (G) Chemical 1: Heavy
catalytic reformer; naphtha
heavy naphtha sales
P-05-0091 11/03/04 01/31/05 CBI (S) Gasoline (G) Chemical 2:
blending; refinery Hydrocracked heavy
feed to catalytic naphtha
reformer
P-05-0092 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Hydrodesulfurized
heavy naphtha
P-05-0093 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Neutralized light
naphtha
P-05-0094 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Hydrotreated
heavy naphtha
P-05-0095 11/03/04 01/31/05 CBI (S) Refinery feed to (G) Catalytic cracked
treater heavy naphtha
P-05-0096 11/03/04 01/31/05 CBI (S) Gasoline (G) Chemical 1: Light
blending; light naphtha
naphtha sales
P-05-0097 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Chemical 2:
Hydrocracked light
naphtha
P-05-0098 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Hydrodesulfurized
light naphtha
P-05-0099 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Neutralized light
naphtha
P-05-0100 11/03/04 01/31/05 CBI (S) Production feed (G) Catalyst cracked
to treater light naphtha
P-05-0101 11/03/04 01/31/05 CBI (S) Gasoline blending (G) Hydrotreated
light naphtha
P-05-0102 11/04/04 02/01/05 CBI (G) Open non- (G) Polyether
dispersive (fuel polyurethane
additive)
P-05-0103 11/05/04 02/02/05 Eastman Kodak Company (G) Chemical (G) Halo phenyl amino
intermediate, substituted
destructive use cyclohexene salt
[[Page 71053]]
P-05-0104 11/05/04 02/02/05 Ashland Inc., (G) Two-component (G) Polyurethane
Environmental Health laminating adhesive prepolymer
and Safety designed to reduce
the level of
aromatic amine
migration. It has
been recommended by
the food and drug
administration that
food packaging
should achieve >
0.7.
P-05-0105 11/05/04 02/02/05 CIBA Specialty (S) A softener for (G) Reaction product
Chemicals textile fabrics of alkylcarboxylic
Corporation acid and substituted
ethanol amine
acetate salt
P-05-0106 11/05/04 02/02/05 CBI (S) Polymerization (S) Hexaneperoxoic
initiator for polvol acid, 2-ethyl-,
production 1,1,3,3-
tetramethylbutyl
ester
P-05-0107 11/09/04 02/06/05 CBI (G) Paper/textile (G)
chemical Perfluoroalkylethyl
methacrylate
copolymer
P-05-0108 11/09/04 02/06/05 Mitsui Chemicals (G) Coating resin (S) 2-propenoic acid,
America, Inc. 2-methyl-, polymer
with 2-hydroxyethyl
2-methyl-2-
propenoate and
methyl 2-methyl-2-
propenoate, 2,2'-
azobis[2-
methylpropanenitrile
]-initiated
P-05-0109 11/09/04 02/06/05 Degussa Corporation (S) Moisture curable (G) Polymer of
adhesive cycloaliphatic
diisocyanate,
aliphatic diol and
aliphatic
dicarboxylic acid
P-05-0110 11/09/04 02/06/05 Cognis Corporation (S) Plastic softner (S) 1,2-
benzenedicarboxylic
acid,
bis(methylcyclohexyl
) ester
P-05-0111 11/09/04 02/06/05 CBI (G) Additive, open, (G)
non-dispersive use Toluylenediisocyanat
e, reaction product
with
benzenedimethanamine
and
methoxypolyethylene
glycol
P-05-0112 11/09/04 02/06/05 Kuraray America, Inc. (S) Organic solvent (S) 1-butanol, 3-
of polyurethane methoxy-3-methyl-,
plastic coating; acetate
ingredient of
various kinds of
paint; organic
solvent of
polyurethane resin;
ingredient of
cleaning agent,
especially for
commercial use;
organic solvent for
screen ink
P-05-0113 11/09/04 02/06/05 CBI (G) Additive, open, (G) Polyethylene-
non-dispersive use polypropylene
glycol, reaction
product with
octadecylisocyanate
P-05-0114 11/09/04 02/06/05 CBI (G) Fertilizer (G) Phosphoric acid,
copper (2+) salt
(1:1:1) copper
hydrogen phosphate
P-05-0115 11/09/04 02/06/05 Cognis Corporation (G) Solvent for (S) Carboxylic acids,
industrial product C5-9, esters with
polyethylene glycol
mono-me ether
P-05-0116 11/08/04 02/05/05 CIBA Specialty (S) A softener for (G) Reaction product
Chemicals textile fabrics of alkylcarboxylic
Corporation acid, substituted
alkenyl amine with
aromatic anhydride
acetate salts
P-05-0117 11/09/04 02/06/05 CBI (G) Fertilizer (G) Copper ammonium
phosphate or
phosphoric acid
ammonium copper salt
P-05-0118 11/08/04 02/05/05 CBI (G) Additives for (G) Metalic salt of
plastics benzoate 2-(2-
butoxyethoxy)ethyl
phosphonate p-tert-
butylbenzoate ph
phosphonate oleate
complexes
P-05-0119 11/08/04 02/05/05 CBI (S) Emulsifier in (G)
emulsion Allylpolyalkylenglyc
polymerization olsulfate, ammonium
salt
P-05-0120 11/08/04 02/05/05 CBI (S) Emulsifier in (G)
emulsion Allylpolyalkylenglyc
polymerization olsulfate, ammonium
salt
P-05-0121 11/09/04 02/06/05 Aques Chemical (G) Emulsifier (G) Vinyl acrylic
Consulting Group, copolymer
LLC
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
[[Page 71054]]
II. 38 Notices of Commencement From: 10/18/04 to 11/09/04
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-04-0383 09/08/04 08/19/04 (G) Hydroxyalkyl
carboxylic acid, polymer
with alkylamine,
alkanediol,
alkyldiisocyanate and
polyalkyl ether,
polyalkylene glycol ether-
blocked, compounds with
alkylamine
P-02-0221 11/09/04 10/19/04 (G) Polyester/styrene-
acrylic grafted resin
P-03-0256 10/28/04 10/18/04 (G)
Hydroxyalkylpolyglycoleth
er
P-03-0356 10/18/04 09/24/04 (G) Halogenated
substituted
mercaptophenyl alkyl
ether
P-03-0365 11/09/04 10/08/04 (G) Halogenated
substituted
benzenesulfonyl chloride
P-03-0552 10/18/04 09/20/04 (G) Amine salt of cyclic
carboxylic acid, polymer
with hydroxy substituted
alkane, branched alkyl
diol, alkanediol,
alkoxylated triol and
alkanetriol.
P-03-0657 10/15/04 10/09/04 (S) Oxirane, methyl-,
polymer with oxirane,
monoC8-10 alkyl ethers,
ethers with 1,2-
decanediol(1:1)
P-03-0797 11/04/04 10/14/04 (G) Halogenated
heteropolycycle
P-04-0025 10/25/04 09/28/04 (G) Aminated styrenate
acrylic salt
P-04-0139 10/19/04 10/04/04 (G) Modified amidoamine
P-04-0144 10/19/04 10/03/04 (G) Modified amidoamine
P-04-0322 10/28/04 10/14/04 (S) 1,3-
benzenedicarboxylic acid,
polymer with 2,2-dimethyl-
1,3-propanediol, 2,5-
furandione, 2,2'-
oxybis[ethanol] and 1,2-
propanediol
P-04-0331 11/09/04 10/09/04 (G) Substituted phenoxy
anthraquinone
P-04-0434 10/25/04 09/29/04 (G) Halo sulfonyl
substituted alkane
P-04-0442 11/03/04 10/27/04 (G) Reaction product of
4,4'-(1-
methylethylidene)bispheno
l, polymer with
(chloromethyl) oxirane;
polyethylene glycol;
ethyleneamine; cresyl
glycidyl ether
P-04-0484 10/19/04 09/29/04 (G) Rosin modified
phenolic resin
P-04-0508 11/04/04 10/20/04 (S) Hexanoic acid, 2-ethyl-
, mixed triesters with
benzoic acid and
trimethylolpropane
P-04-0509 11/04/04 10/20/04 (S) Hexanoic acid, 2-ethyl-
, mixed diesters with
benzoic acid and
neopentyl glycol
P-04-0510 11/04/04 10/20/04 (S) Hexanoic acid, 2-ethyl-
, mixed diesters with
benzoic acid and
diethylene glycol
P-04-0552 11/05/04 10/22/04 (G) Spiro[isobenzofuran-
1(3h),9'-
[9h]heteropolycycle]-3-
one, 3'-chloro-6'-(2,3-
dihydro-1h-indol-1yl)-
4,5,6,7-tetrafluoro-
P-04-0553 11/05/04 10/26/04 (G) Spiro[isobenzofuran-
1(3h),9'-
[9h]heteropolycycle]-3-
one, 3'-(2,3-dihydro-1h-
indol-1yl)-4,5,6,7-
tetrafluoro-6'-[(4-
methoxy-2-
methylphenyl)amino]-
P-04-0554 11/05/04 10/19/04 (G) Spiro[isobenzofuran-
1(3h),9'-
[9h]heteropolycycle]-3-
one, 3',6'-dichloro-
4,5,6,7-tetrafluoro-
P-04-0555 11/05/04 10/16/04 (G) Spiro[isobenzofuran-
1(3h),9'-
[9h]heteropolycycle]-3-
one, 4,5,6,7-tetrafluoro-
3',6'-dihydroxy-
P-04-0558 11/01/04 10/13/04 (G) Amine neutralized
alkyd resin
P-04-0566 11/03/04 10/12/04 (G) Poly[oxy(methyl-1,2-
ethanediyl)], .alpha.-
hydro-.omega.-hydroxy-,
polymer with isocyanate,
2-hydroxyethyl
methacrylate-blocked
P-04-0576 10/21/04 09/08/04 (S) Soybean oil, maleated,
ester with
triethanolamine
P-04-0592 11/09/04 10/12/04 (G) Polyurea thickener
P-04-0628 11/01/04 10/12/04 (G) Spiro[isobenzofuran-
1(3h),9'-
[9h]heteropolycycle]-3-
one, 3'-[(2-
methylphenyl)amino]-6'-
[(2-
methylphenyl)octylamino]-
P-04-0629 11/01/04 10/08/04 (G) Spiro[isobenzofuran-
1(3h),9'-
[9h]heteropolycycle]-3-
one, 3',6'-bis[(2-
methylphenyl)amino]-
P-04-0631 10/18/04 10/06/04 (G) Fatty acid polyester
amide
P-04-0645 10/15/04 09/16/04 (G) Amine functional epoxy
resin salted with organic
acid
P-04-0668 11/08/04 10/08/04 (G) Reactant polymer with
the acrylate copolymer of
(an isocyanate spices and
three spices of acrylate
polymer), and the
polyurethane acrylate
P-04-0669 10/20/04 09/22/04 (G) Copolymer of mixed
alkyl methacrylates and a
substituted alkyl
methacrylate
P-04-0690 11/03/04 10/30/04 (G) Methyl amino ethyl
ether
P-04-0695 11/04/04 11/02/04 (G) Alkanolamine phenolic
mannich adduct
P-04-0702 11/03/04 10/12/04 (G) Modified silicone
polymer
P-04-0708 11/03/04 10/12/04 (G) Telechelic
polyacrylates
P-04-0778 11/05/04 10/28/04 (G) Polyester
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: November 30, 2004.
Vanessa Williams,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 04-26945 Filed 12-7-04; 8:45 am]
BILLING CODE 6560-50-S