[Federal Register: June 14, 2005 (Volume 70, Number 113)]
[Rules and Regulations]
[Page 34325-34329]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr14jn05-7]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-05-21177; Directorate Identifier 2005-CE-26-AD;
Amendment 39-14129; AD 2005-12-13]
RIN 2120-AA64
Airworthiness Directives; Cessna Aircraft Company Models 402C and
414A Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule; request for comments
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) to
supersede AD 2005-05-52 (70 FR 13362, March 21, 2005), which applies to
all Cessna Aircraft Company (Cessna) Models 402C and 414A airplanes. AD
2005-05-52 currently requires you to eddy current inspect the forward
wing spars and visually inspect the aft and auxiliary spars. This AD is
the result of fatigue and crack growth analyses of the wings of these
airplanes, recent cracks found on Model 402C airplanes, and the FAA's
determination that repetitive inspections and a wing spar modification
are necessary to address the unsafe condition. Consequently, this AD
would require repetitive eddy current inspections, visual inspections,
and a spar strap modification on each wing. You must retain the actions
of AD 2005-05-52 until you do the modifications of this AD. The actions
specified by this AD are intended to prevent wing spar cap failure
caused by undetected fatigue cracks. Such failure could result in loss
of a wing with consequent loss of airplane control. FAA is also issuing
AD 2005-12-12 to require the spar strap modification and long-term
inspections on Models 401, 401A, 402, 402A, 402B, 411, and 411A
airplanes.
DATES: This AD becomes effective on June 22, 2005.
As of June 22, 2005, the Director of the Federal Register approved
the incorporation by reference of certain publications listed in the
regulation.
We must receive any comments on this AD by August 3, 2005.
ADDRESSES: Use one of the following to submit comments on this AD:
DOT Docket Web site: Go to http://dms.dot.gov and follow
the instructions for sending your comments electronically.
Government-wide rulemaking Web site: Go to http://www.regulations.gov
and follow the instructions for sending your
comments electronically.
Mail: Docket Management Facility; U.S. Department of
Transportation, 400 Seventh Street, SW., Nassif Building, Room PL-401,
Washington, DC 20590-001.
Fax: 1-202-493-2251.
Hand Delivery: Room PL-401 on the plaza level of the
Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
To get the service information identified in this AD, contact
Cessna Aircraft Company, Product Support, P.O. Box 7706, Wichita,
Kansas 67277; telephone: (316) 517-5800; facsimile: (316) 942-9006.
To view the comments to this AD, go to http://dms.dot.gov. The
docket number is FAA-05-21177; Directorate Identifier 2005-CE-26-AD.
FOR FURTHER INFORMATION CONTACT: Paul Nguyen, Aerospace Engineer, FAA,
ACE-118W, Wichita Aircraft Certification Office, 1801 Airport Road,
Mid-Continent Airport, Wichita, Kansas 67209; telephone: (316) 946-
4125; facsimile: (316) 946-4107.
SUPPLEMENTARY INFORMATION:
What Events Have Caused This AD?
Initial AD Action
FAA issued AD 99-11-13 (64 FR 29781, June 3, 1999), requiring
inspections of the forward, aft, and auxiliary wing spars for cracks on
Cessna Models 402C airplanes with repair or replacement as necessary.
AD 99-11-13 also required the operator to report the results of the
inspections to FAA. AD 99-11-13 resulted from an accident where the
right wing of a Cessna 402C failed just inboard of the nacelle at Wing
Station (WS) 87. Investigation revealed fatigue cracking of the forward
main spar that initiated at the edge of the front spar forward lower
spar cap. FAA determined the spar cap cracking could continue to
develop over the life of the affected airplanes and issued AD 2000-23-
01, Amendment 39-11971 (65 FR 70645, November 27, 2000), to require
repetitive inspections of the forward, aft, and auxiliary wing spars
for cracks on Cessna Models 402C airplanes with repair or replacement
as necessary.
Accomplishment of the actions mandated by AD 2000-23-01 required
following Cessna Service Bulletin MEB99-3, dated May 6, 1999.
Wing Analysis
Cessna analyzed the wing, including fatigue and crack growth
analyses, on the affected airplanes. Analysis included:
--A determination of the probable location and modes of damage based on
analytical results, available test data, and service information;
--Classical fatigue analyses;
--Crack growth and residual strength analyses including use of linear
elastic fracture mechanics methods;
--Full-scale ground testing to validate analytical models; and
--A flight strain survey to develop stress spectra used in the
analyses.
Based on the analysis, Cessna found that the eddy current method
will not find the crack until it is .03 inch longer than the critical
crack length. When the crack reaches the critical length, it is not
reliably detectable because it is under the head of the fastener. Once
the main spar cap is severed, the remaining structure will no longer
meet the residual strength requirements. Wing separation could then
occur under loading conditions less than those established for the
design limit load.
Cessna reported only one instance where use of the NDI eddy current
procedure detected cracks. There are other reported instances where
cracks were detected visually on the aft flange in the wheel well area.
The access doubler flanges cover a large percentage of the forward spar
flange, hampering the effectiveness of visual inspections.
To meet industry NDI standards, cracks need to be found on Cessna
Models 402C and 414A airplanes through NDI inspection methods with a
90-percent probability of detection at a 95-percent confidence level.
Cessna's analysis indicates the probability and confidence levels
are not being met. The FAA concurs.
Action Based on Cessna's Analysis
We issued proposals to amend part 39 of the Federal Aviation
Regulations (14 CFR part 39) to include two ADs that would apply to
Cessna Models 401, 401A, 401B, 402, 402A, 402B, 402C, 411, 411A, and
414A airplanes. These proposals (Docket Nos. 2002-CE-05-AD and 2002-CE-
57-AD) published in the Federal Register as notices of proposed
rulemaking (NPRMs) on May 15, 2003 (68 FR 26239 and 68 FR 26244). The
NPRMs proposed the following:
Docket No. 2002-CE-05-AD: applied to Cessna Models 401,
401A,
[[Page 34326]]
401B, 402, 402A, 402B, 411, and 411A airplanes and proposed to
supersede AD 79-10-15 with a new AD that would require one of the
following (depending on the aircraft configuration):
[check] For airplanes that do not incorporate one of the specified
Cessna Service Kits: repetitively inspect the wing spar caps for
fatigue cracks and repair or replace the wing spar caps as necessary
and incorporate a spar strap modification on each wing spar; or
[check] For airplanes that incorporate one of the specified Cessna
Service Kits: repetitively inspect the wing spar caps and straps for
fatigue cracks and repair or replace the wing spar caps and straps as
necessary.
[check] Docket No. 2002-CE-57-AD: applied to Cessna Models 402C and
414A airplanes and proposed to supersede AD 2000-23-01 with a new AD
that would require you to:
[check] Inspect the wing spar caps for fatigue cracks;
[check] Repair or replace the wing spar caps as necessary; and
[check] Incorporate a spar strap modification on each wing spar.
The FAA invited interested persons to participate in the
development of these amendments during the original 75-day comment
periods. We extended the comment periods for another 30 days and then
reopened the comment periods for another 60 days. We received numerous
comments on the NPRMs.
In addition, FAA held two public meetings: One on March 3 and 4,
2004, in Herndon, Virginia, and another on August 18, 2004, in Kansas
City, Missouri. The public meetings allowed an open flow of
communication among FAA, the public, and industry on issues related to
the NPRMs.
After analyzing all information related to this subject, FAA
decided not to issue the ADs as proposed, and that the best way to
address the unsafe condition is for FAA, the public, and industry to
develop alternative solutions to address the unsafe condition.
Therefore, FAA withdrew the two NPRMs and gathered the necessary
information to address the situation. That information led to FAA's
determination, at that time, to initiate AD action against the Models
401, 401A, 401B, 402, 402A, 402B, 411, and 411A airplanes; and not
against the Models 402C and 414A airplanes. The plan was to address the
action through the regular rulemaking process with a notice of proposed
rulemaking.
Most Recent Service History
In 2005, the FAA received reports of (and analyzed data from)
cracks found in the wings of two Cessna Model 402C airplanes.
On the first airplane, information indicated the airplane had
severe cracking on its left wing in the vicinity of the forward spar
and outboard engine beam. The main lower spar cap had completely failed
at about Wing Station (WS) 114. The airplane had cracks in the lower
wing skin and the web splice doubler. Also found were two popped
rivets: One between the heat shield and the wing skin and another
between the factory installed web splice doublers and web. The airplane
had 20,355 total hours time-in-service (TIS).
During the airplane's most recent flights before the cracking was
found, the pilot noticed that roll trim was required. The flights
required the pilot to use aileron trim to maintain level flight. The
airplane landed safely and inspection revealed the cracks.
On the second airplane, fatigue cracks were found at about WS 114
in the main lower spar cap of another Model 402C airplane that had over
20,000 total hours TIS. Fatigue analysis shows that similar fatigue
cracks could also develop in the wings of the Model 414A airplanes.
Logbook records indicated that both airplanes with cracked spars
were in compliance with AD 2000-23-01. The FAA received a third report
of another cracked spar found at WS 114 on one of the two Model 402C
incident airplanes.
Therefore, FAA issued Emergency AD 2005-05-51 to detect and correct
cracking in the wing spars of the Cessna Models 402C and 414A airplanes
before the cracks grow to failure. Such a wing failure could result in
the wing separating from the airplane with consequent loss of control
of the airplane.
Emergency AD 2005-05-51 superseded AD 2000-23-01 and:
Required the visual inspections of the forward, aft, and
auxiliary wings spars for cracks more frequently on Model 402C
airplanes including special emphasis areas;
Added inspection requirements for the Model 414A
airplanes; and
Included provisions to position the airplane to a home
base, hangar, maintenance facility, etc.
Emergency AD 2005-05-51 did not affect those airplanes that
incorporated a spar strap modification on each wing following the
original release of (or a later FAA-approved revision to) Cessna
Service Bulletin MEB02-5 and Cessna Service Kit SK402-47 (currently at
MEB02-5 Revision 2 and SK402-47B).
Long-Term Continued Operational Safety
Emergency AD 2005-05-51 was considered an interim action to
immediately require visual inspection of the forward, aft, and
auxiliary wing spars for cracks. The intent was to immediately detect
existing cracking before it grew to wing failure.
Cessna developed new inspection techniques (eddy current) for the
forward spar that are more effective at detecting cracks before the
structural integrity of the wing is compromised. These inspection
techniques allow for longer intervals between repetitive inspections
than in emergency AD 2005-05-51. Based on this, FAA issued AD 2005-05-
52, Amendment 39-14022 (70 FR 13362, dated March 21, 2005).
However, based on the analysis and recent service history, the FAA
has determined that the long-term operational safety of the Cessna
airplanes addressed by AD 2005-05-52 can only be assured through the
incorporation of a spar strap modification and long-term repetitive
inspections. Since the Models 402C and 414A airplanes have a similar
type design to that of Models 401, 401A, 401B, 402, 402A, 402B, 411,
and 411A airplanes, FAA is also issuing AD 2005-12-12 to require the
spar strap modification and long-term repetitive inspections on those
airplanes.
What is the potential impact if FAA took no action? Wing spar cap
failure caused by undetected fatigue cracks could result in loss of a
wing with consequent loss of airplane control.
Is there service information that applies to this subject? Cessna
has issued the following: Cessna Multi-engine Service Bulletin MEB02-5,
Revision 2, dated August 2, 2004, and Service Kit SK402-47B, dated
August 2, 2003.
This service information includes procedures for inspecting lower
wing spar caps and incorporating a spar strap modification.
FAA's Determination and Requirements of the AD
What has FAA decided? We have evaluated all pertinent information
and identified an unsafe condition that is likely to exist or develop
on other products of this same type design.
Since the unsafe condition described previously is likely to exist
or develop on other Cessna Aircraft Company Models 402C and 414A
airplanes of the same type design, we are issuing this AD to detect and
correct wing spar cap failure caused by undetected fatigue cracks. Such
failure could result in loss
[[Page 34327]]
of a wing with consequent loss of airplane control.
What does this AD require? This AD supersedes AD 2005-05-52 with a
new AD that incorporates the actions in the previously-referenced
service bulletins and retains the actions of AD 2005-05-52 until you do
the modifications of this AD.
Why do the compliance times of this AD range between 400 hours TIS
and 800 hours TIS? We have established the compliance times based on
risk analysis that also allows for compliance scheduling. The
compliance time range is based on total hours TIS, which will address
those high-usage airplanes first.
We are issuing this AD as a final rule; request for comments
instead of a notice of proposed rulemaking (NPRM). We have evaluated
comments from the previous AD actions on this subject and the two
public meetings as well as the incidents that have occurred since
(e.g., the actions of Emergency AD 2005-05-52). Based on this, FAA has
determined that addressing the unsafe condition with public comment
prior to issuing this AD action is impracticable. The FAA will evaluate
any new comments received and amend the AD as necessary.
How does the revision to 14 CFR part 39 affect this AD? On July 10,
2002, we published a new version of 14 CFR part 39 (67 FR 47997, July
22, 2002), which governs FAA's AD system. This regulation now includes
material that relates to altered products, special flight permits, and
alternative methods of compliance. This material previously was
included in each individual AD. Since this material is included in 14
CFR part 39, we will not include it in future AD actions.
Comments Invited
Will I have the opportunity to comment before you issue the rule?
This AD is a final rule that involves requirements affecting flight
safety and was not preceded by notice and an opportunity for public
comment; however, we invite you to submit any written relevant data,
views, or arguments regarding this AD. Send your comments to an address
listed under ADDRESSES. Include ``Docket No. FAA-05-21177; Directorate
Identifier 2005-CE-26-AD'' in the subject line of your comments. If you
want us to acknowledge receipt of your mailed comments, send us a self-
addressed, stamped postcard with the docket number written on it; we
will date-stamp your postcard and mail it back to you. We specifically
invite comments on the overall regulatory, economic, environmental, and
energy aspects of the rule that might suggest a need to modify it. If a
person contacts us through a nonwritten communication, and that contact
relates to a substantive part of this AD, we will summarize the contact
and place the summary in the docket. We will consider all comments
received by the closing date and may amend the AD in light of those
comments.
Authority for This Rulemaking
What authority does FAA have for issuing this rulemaking action?
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, Section 106 describes the
authority of the FAA Administrator. Subtitle VII, Aviation Programs,
describes in more detail the scope of the agency's authority.
We are issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701, ``General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this AD.
Regulatory Findings
Will this AD impact various entities? We have determined that this
AD will not have federalism implications under Executive Order 13132.
This AD will not have a substantial direct effect on the States, on the
relationship between the national government and the States, or on the
distribution of power and responsibilities among the various levels of
government.
Will this AD involve a significant rule or regulatory action? For
the reasons discussed above, I certify that this AD:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979); and
3. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared a summary of the costs to comply with this AD (and
other information as included in the Regulatory Evaluation) and placed
it in the AD Docket. You may get a copy of this summary by sending a
request to us at the address listed under ADDRESSES. Include ``AD
Docket FAA-05-21177; Directorate Identifier 2005-CE-26-AD'' in your
request.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
0
Accordingly, under the authority delegated to me by the Administrator,
the Federal Aviation Administration amends part 39 of the Federal
Aviation Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by removing Airworthiness Directive (AD)
2005-05-52, Amendment 39-14022, and by adding a new AD to read as
follows:
2005-12-13 Cessna Aircraft Company: Amendment 39-14129; Docket No.
FAA-05-21177; Directorate Identifier 2005-CE-26-AD.
When Does This AD Become Effective?
(a) This AD becomes effective on June 22, 2005.
Are Any Other ADs Affected by This Action?
(b) Yes. This AD supersedes AD 2005-05-52; Amendment 39-14022.
What Airplanes Are Affected by This AD?
(c) This AD affects Models 402C and 414A, all serial numbers,
that are certificated in any category.
What is the Unsafe Condition Presented in This AD?
(d) This AD is the result of fatigue cracks found in the lower
wing spar caps. We are issuing this AD to prevent wing spar cap
failure caused by undetected fatigue cracks. Such failure could
result in loss of a wing with consequent loss of airplane control.
What Must I Do To Address This Problem?
(e) Modification of the Wing Spars:
(1) For Cessna Model 414A airplanes, serial numbers 414A0001
through 414A0047 and 414A0049 through 414A0200, incorporate a spar
strap modification on each wing (Cessna Multi-Engine Service Kit
SK402-47B, dated August 2, 2003), following Cessna Multi-Engine
Service Bulletin MEB02-5, Revision 2, dated August 2, 2004, unless
Cessna Multi-Engine Service Kit SK402-47, SK402-47A, or SK402-47B
has already been done. The above modifications terminate the
repetitive inspection requirements of AD 2005-05-52:
[[Page 34328]]
------------------------------------------------------------------------
Modification of the
If you have equal to or more But less than-- lower Wing Spar Cap
than-- compliance times
------------------------------------------------------------------------
(i) 12,000 hours time-in- Not Applicable...... Within 400 hours TIS
service (TIS). after June 22, 2005
(the effective date
of this AD).
(ii) 9,000 hours TIS on the 12,000 hours TIS.... Within 800 hours TIS
wing or wing spar. after June 22, 2005
(the effective date
of this AD).
(iii) 0 hours TIS on the 9,000 hours TIS..... At whichever of the
wing or wing spar;. following occurs
later:
Upon
accumulating 9,000
hours TIS or
Within 800
hours TIS after
June 22, 2005 (the
effective date of
this AD).
------------------------------------------------------------------------
(2) For Cessna Model 402C airplanes, all serial numbers; and
Model 414A airplanes, serial numbers 414A0201 through 414A1212,
incorporate a spar strap modification on each wing (Cessna Multi-
Engine Service Kit SK402-47B, dated August 2, 2003), following
Cessna Multi-Engine Service Bulletin MEB02-5, Revision 2, dated
August 2, 2004, unless Cessna Multi-Engine Service Kit SK402-47,
SK402-47A, or SK402-47B has already been done. The above
modifications terminate the repetitive inspection requirements of AD
2005-05-52:
------------------------------------------------------------------------
Modification of the
If you have equal to or more But less than-- lower Wing Spar Cap
than-- compliance times
------------------------------------------------------------------------
(i) 20,000 hours TIS........ Not Applicable...... Within 400 hours TIS
after June 22, 2005
(the effective date
of this AD).
(ii) 15,000 hours TIS on the 20,000 hours TIS.... Within 800 hours TIS
wing or wing spar. after June 22, 2005
(the effective date
of this AD).
(iii) 0 hours TIS on the 15,000 hours TIS.... At whichever of the
wing or wing spar. following occurs
later:
Upon
accumulating 15,000
hours TIS on the
wing or wing spar;
or
Within 800
TIS after June 22,
2005 (the effective
date of this AD).
------------------------------------------------------------------------
(f) Repetitive Inspection of the Wing Spar: Until the
modification in paragraph (e)(1) and (e)(2) of this AD is done,
continue the repetitive eddy current inspections of the forward wing
spars combined with visual inspections of the aft and auxiliary
spars as mandated by AD 2005-05-52. Do these inspections following
the ACCOMPLISHMENT INSTRUCTIONS section of Cessna Service Bulletin
MEB99-3 (Model 402C) or Cessna Service Bulletin MEB00-7 (Model
414A), both at Revision 2 and both dated February 28, 2005. The
modification required in paragraph (e)(1) and (e)(2) of this AD
terminates the repetitive inspection requirements of AD 2005-05-52.
------------------------------------------------------------------------
Repetitive Eddy
Affected airplanes Eddy current and current and visual
visual inspections inspection interval
------------------------------------------------------------------------
(1) For Model 414A At whichever of the Thereafter at
airplanes, serial numbers following occurs intervals not to
414A0001 through 414A0047 later: exceed 100 hours
and 414A0049 through Upon TIS.
414A0200. accumulating 8,500
hours TIS on the
airplane;.
At the next
inspection that
would have been
required by
emergency AD 2005-
05-51 (required at
intervals not to
exceed 15 hours
TIS); or.
Within the
next 2 days after
the March 21, 2005
(the effective date
of AD 2005-05-52)
(2 days after
receipt for those
who received this
AD as an emergency
AD).
(2) For the following
airplanes that have 15,000
hours or more TIS or upon
accumulating 15,000 hours
TIS:
(i) All Model 402C airplanes
(ii) Model 414A airplanes, At whichever of the Thereafter at
serial numbers 414A0201 following occurs intervals not to
through 414A1212. later: exceed 100 hours
Upon TIS.
accumulating 15,000
hours TIS on the
airplane;.
At the next
inspection that
would have been
required by
emergency AD 2005-
05-51 (required at
intervals not to
exceed 15 hours
TIS); or.
Within the
next 2 days after
March 21, 2005 (the
effective date of
AD 2005-05-52) (2
days after receipt
for those who
received this AD as
an emergency AD).
------------------------------------------------------------------------
(g) If the wings or wing spars were replaced with new or used
wings or wing spars during the life of the airplane and logbook
records positively show the TIS of the wings or wing spars, then
initially inspect and modify at applicable wing or wing spar times
in paragraphs (e)(1), (e)(2), and (f) of this AD.
[[Page 34329]]
(h) If the wings or wing spars were replaced with new or used
wings or wing spars during the life of the airplane and logbook
records cannot positively show the TIS of the wings or wing, then
inspect and modify within 400 hours TIS after June 22, 2005 (the
effective date of this AD), unless already done.
(i) For all Cessna Models 402C and 414A airplanes with Cessna
Service Kit SK402-47, SK402-47A, or SK402-47B incorporated, inspect
and repair or replace as necessary prior to further flight after the
inspection where cracks are found. Inspect following the procedures
in Cessna Model 402C and 414A Supplemental Inspection Document
(SID), Inspection ID 57-10-16 (compliance times in this AD take
precedence over the compliance times in the SID): Initially upon
accumulating 12,500 hours TIS after incorporating the applicable
service kit on a wing spar or within the next 100 hours TIS after
June 22, 2005 (the effective date of this AD), whichever occurs
later, unless already done, and thereafter at intervals not to
exceed 500 hours TIS. You may request an alternative method of
compliance to adjust the compliance times for these inspections by
following the procedures in 14 CFR 39.19 and this AD.
(j) Wing Spar Replacement if Cracks Found During any Inspection
Required by this AD: Prior to further flight, replace the wing spar
with a new wing spar or a used wing spar where wing or wing spar
hours TIS can be positively identified. Do not install used wings
spars when you are not able to positively identify total wing or
wing spar hours TIS.
(k) Reporting Requirement: Report any cracks you find within 10
days after the cracks are found or within 10 days after June 22,
2005 (the effective date of this AD), whichever occurs later. Do not
report if no cracks are found. Include in your report the aircraft
serial number, aircraft TIS, wing spar cap TIS, crack location and
size, corrective action taken, and a point of contact name and phone
number. Send your report to Paul Nguyen, Aerospace Engineer, FAA,
ACE-118W, Wichita Aircraft Certification Office, 1801 Airport Road,
Mid-Continent Airport, Wichita, Kansas 67209; telephone: (316) 946-
4125; facsimile: (316) 946-4107.
May I Request an Alternative Method of Compliance?
(l) You may request a different method of compliance or a
different compliance time for this AD by following the procedures in
14 CFR 39.19. Unless FAA authorizes otherwise, send your request to
your principal inspector. The principal inspector may add comments
and will send your request to the Manager, Wichita Aircraft
Certification Office, FAA. For information on any already approved
alternative methods of compliance, contact Paul Nguyen, Aerospace
Engineer, FAA, ACE-118W, Wichita Aircraft Certification Office, 1801
Airport Road, Mid-Continent Airport, Wichita, Kansas 67209;
telephone: (316) 946-4125; facsimile: (316) 946-4107.
Does This AD Incorporate Any Material by Reference?
(m) You must do the actions required by this AD following the
instructions in Cessna Multi-Engine Service Bulletin MEB02-5,
Revision 2, dated August 2, 2004, and Service Kit SK402-47B, dated
August 2, 2003. The Director of the Federal Register approved the
incorporation by reference of this service bulletin in accordance
with 5 U.S.C. 552(a) and 1 CFR part 51. To get a copy of this
service information, contact Cessna Aircraft Company, Product
Support, P.O. Box 7706, Wichita, Kansas 67277; telephone: (316) 517-
5800; facsimile: (316) 942-9006. To review copies of this service
information, go to the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, go to: http:// www. archives.gov/ federal-- register/code --
of-- federal-- regulations/ibr-- locations. html or call (202) 741-
6030. To view the AD docket, go to the Docket Management Facility;
U.S. Department of Transportation, 400 Seventh Street, SW., Nassif
Building, Room PL-401, Washington, DC 20590-001 or on the Internet
at http://dms.dot.gov. The docket number is FAA-05-21177;
Directorate Identifier 2005-CE-26-AD.
Issued in Kansas City, Missouri, on June 7, 2005.
Kim Smith,
Acting Manager, Small Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 05-11613 Filed 6-13-05; 8:45 am]
BILLING CODE 4910-13-U