[Federal Register: June 24, 2005 (Volume 70, Number 121)]
[Notices]
[Page 36588-36594]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr24jn05-69]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2005-0035; FRL-7722-4
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSC, EPA is required to publish a notice of receipt of a premanufacture
notice (PMN) or an application for a test marketing exemption (TME),
and to publish periodic status reports on the chemicals under review
and the receipt of notices of commencement to manufacture those
chemicals. This status report, which covers the period from May 11,
2005 to June 8, 2005, consists of the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
DATES: Comments identified by the docket identification (ID) number
OPPT-2005-0035 and the specific PMN number or TME number, must be
received on or before July 25, 2005.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter
[[Page 36589]]
of the premanufacture notices addressed in the action. If you have any
questions regarding the applicability of this action to a particular
entity, consult the person listed under FOR FURTHER INFORMATION
CONTACT.
B. How Can I Get Copies of this Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket ID number OPPT-2005-0035. The official public
docket consists of the documents specifically referenced in this
action, any public comments received, and other information related to
this action. Although a part of the official docket, the public docket
does not include Confidential Business Information (CBI) or other
information whose disclosure is restricted by statute. The official
public docket is the collection of materials that is available for
public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA
West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket
Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday,
excluding legal holidays. The EPA Docket Center Reading Room telephone
number is (202) 566-1744 and the telephone number for the OPPT Docket,
which is located in EPA Docket Center, is (202) 566-0280.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide a reference to that
material in the version of the comment that is placed in EPA's
electronic public docket. The entire printed comment, including the
copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the photograph
will be placed in EPA's electronic public docket along with a brief
description written by the docket staff.
C. How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number and specific PMN number or TME number in
the subject line on the first page of your comment. Please ensure that
your comments are submitted within the specified comment period.
Comments received after the close of the comment period will be marked
``late.'' EPA is not required to consider these late comments. If you
wish to submit CBI or information that is otherwise protected by
statute, please follow the instructions in Unit I.D. Do not use EPA
Dockets or e-mail to submit CBI or information protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/
, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPPT-2005-0035. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov,
Attention: Docket ID Number OPPT-2005-0035 and PMN Number or TME
Number. In contrast to EPA's electronic public docket, EPA's e-mail
system is not an ``anonymous access'' system. If you send an e-mail
comment directly to the docket without going through EPA's electronic
public docket, EPA's e-mail system automatically captures your e-mail
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the
official public docket, and made available in EPA's electronic public
docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid
[[Page 36590]]
the use of special characters and any form of encryption.
2. By mail. Send your comments to: Document Control Office (7407M),
Office of Pollution Prevention and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
3. By hand delivery or courier. Deliver your comments to: OPPT
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number
OPPT-2005-0035 and PMN Number or TME Number. The DCO is open from 8
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930.
D. How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the technical person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the notice or collection
activity.
7. Make sure to submit your comments by the deadline in this
document.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action and the specific PMN number you are
commenting on in the subject line on the first page of your response.
You may also provide the name, date, and Federal Register citation.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from May 11, 2005 to June 8, 2005,
consists of the PMNs pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 47 Premanufacture Notices Received From: 05/11/05 to 06/08/05
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-05-0545 05/12/05 08/09/05 CBI (G) Manufacture of (G) Urethane polymer
protective devices
P-05-0546 05/12/05 08/09/05 CBI (G) Open non- (G) Alkyl resin
dispersive (coating)
P-05-0547 05/13/05 08/10/05 Degussa Corporation (S) Polymer powder (G) Aromatic
for shapes polyimide
manufactured by
compression molding
P-05-0548 05/13/05 08/10/05 CBI (G) Plastics additive (G) Alkyl carboxylate
salt
P-05-0549 05/16/05 08/13/05 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-05-0550 05/16/05 08/13/05 CBI (G) Additive of ink (G) Acrylic ester
material copolymer
P-05-0551 05/16/05 08/13/05 CBI (G) Polymerization (G) Polyalkylene
emulsifier glycol alkyl ether,
reaction products
with allyl glycidyl
ether
P-05-0552 05/17/05 08/14/05 CBI (G) Machine seals, (G) Aromatic
wheels and rollers polyurethane polymer
P-05-0553 05/17/05 08/14/05 Ethox Chemicals, LLC (G) Surface coating (S) Oxirane, methyl-,
polymer with
oxirane,
monoacetate, 2-
hexyldecyl ether
P-05-0554 05/18/05 08/15/05 CBI (G) Dispersants, (G) Polybutadiene
curing synergysts, imide
adhesives
[[Page 36591]]
P-05-0555 05/18/05 08/15/05 Mitsuya Boeki USA, (G) Curing agent (S) Dodecanedioic
Inc. acid, dihydrazide
P-05-0556 05/19/05 08/16/05 CBI (G) Pigment (G) Polyurethane
dispersant derivative
P-05-0557 05/20/05 08/17/05 Gharda Chemicals LTD. (S) Molding and (G)
extrusion; Polyetherethersulfon
compounding esulfone block
copolymer
P-05-0558 05/20/05 08/17/05 CBI (G) Component for the (G) Trisubstituted-
coloration of phenylazo-
polyester fiber propenylamino-
methoxy-phenyl-
acetamide
P-05-0559 05/23/05 08/20/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Environmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, 1,6-
hexanediyl di-2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
oxybis(methyl-2,1-
ethanediyl) di-2-
propenoate and 2-
phenoxyethyl 2-
propenoate, reaction
products with
alkylamine
P-05-0560 05/23/05 08/20/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Environmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, 1,6-
hexanediyl di-2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
oxybis(methyl-2,1-
ethanediyl) di-2-
propenoate and 2-
phenoxyethyl 2-
propenoate, reaction
products with
alkanolamine
P-05-0561 05/23/05 08/20/05 Ashland Inc., (G) Adhesive, (G) 2-propenoic acid,
Environmental Health coating, ink 1,6-hexanediyl
and Safety ester, polymer with
(chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
oxybis(methyl-2,1-
ethanediyl) di-2-
propenoate, .beta.-
diketone and 2-
phenoxyethyl 2-
propenoate, reaction
products with
alkylamine
P-05-0562 05/23/05 08/20/05 Ashland Inc., (G) Adhesive, (G) 2-propenoic acid,
Environmental Health coating, ink 1,6-hexanediyl
and Safety ester, polymer with
(chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
oxybis(methyl-2,1-
ethanediyl) di-2-
propenoate, .beta.-
diketone and 2-
phenoxyethyl 2-
propenoate, reaction
products with
alkanolamine
[[Page 36592]]
P-05-0563 05/23/05 08/20/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Environmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, 1,6-
hexanediyl di-2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
oxybis(methyl-2,1-
ethanediyl) di-2-
propenoate, .beta.-
diketone and 2-
phenoxyethyl 2-
propenoate, reaction
products with
alkylamine
P-05-0564 05/23/05 08/20/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Environmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, 1,6-
hexanediyl di-2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
oxybis(methyl-2,1-
ethanediyl) di-2-
propenoate, .beta.-
diketone and 2-
phenoxyethyl 2-
propenoate, reaction
products with
alkanolamine
P-05-0565 05/23/05 08/20/05 CBI (G) Lubricant (G) N-alkylated para-
additive amino diphenylamine
P-05-0566 05/23/05 08/20/05 CBI (G) Open, non- (G) Hexanediol
dispersive (resin) polycarbonate-based
polyurethane-
polyurea
P-05-0567 05/23/05 08/20/05 CBI (G) Open, non- (G) Hexanediol
dispersive (resin) polycarbonate-based
polyurethane-
polyurea
P-05-0568 05/25/05 08/22/05 Firmenich inc. (S) Isolated (S) Acetic acid,
intermediate chloro-, 1-(3,3-
dimethylcyclohexyl)e
thyl ester
P-05-0569 05/25/05 08/22/05 3M company (S) Moisture curing (G) Polyurethane
hot melt adhesive prepolymer
P-05-0570 05/26/05 08/23/05 CBI (G) Catalyst (G) Ammonium multi-
metal hydroxide
oxide compound
P-05-0571 05/26/05 08/23/05 Meadwestvaco (S) Acrylic support (G) Acrylate, polymer
Corporation - resin for printing with styrene and
Specialty Chemicals inks methylamino chloride
Division compounds
P-05-0572 05/26/05 08/23/05 CBI (G) Catalyst (G) Ammonium multi-
metal nitrate oxide
compound
P-05-0573 05/31/05 08/28/05 CBI (G) Industrial (S) Poly(oxy-1,4-
Specialty Coating butanediyl), .alpha.-
hydro-.omega.-
hydroxy-, polymer
with 2,4-
diisocyanato-1-
methylbenzene and
.alpha., .alpha.'-
[(1-
methylethylidene) di-
4,1-
phenylene]bis[.omega
.-hydroxypoly(oxy-
1,2-ethanediyl)], 2-
hydroxy-3-
phenoxypropylacrylat
e-blocked
P-05-0574 05/27/05 08/24/05 CBI (G) Laminating (G) Polyurethane
adhesive polymer
P-05-0575 05/27/05 08/24/05 CBI (G) Maintenance (G) Acrylic polymer
coating binder
P-05-0576 05/31/05 08/28/05 Hanse Chemie USA, (S) Modifier to (S) Silane,
Inc. impact resistance trimethoxyphenyl-,
hydrolysis products
with silica
P-05-0577 05/31/05 08/28/05 Hanse Chemie USA, (S) Modifier to (S) Silane,
Inc. impact resistance trimethoxypropyl-,
hydrolysis products
with silica
P-05-0578 06/01/05 08/29/05 The Dow Chemical (S) Polymer used in (G) Isocyanate
Company sealant manufacture functional poly
carbomoyl
(polyalkylene oxide)
P-05-0579 06/01/05 08/29/05 CIBA Specialty (S) Light stabilizer (G) 2-[4-(4,6-bis-
Chemicals for use in coatings biphenyl]-4-yl-
Corporation [1,3,5]triazin-2-yl]-
3-hydroxy-phenoxy]-,
alkyl acid isoaklyl
ester
P-05-0580 06/01/05 08/29/05 CBI (G) Coating resin (G) Acrylic acid
polymer with
vinylated benzenes
and substituted
propanediol
trimethacrylate
P-05-0581 06/01/05 08/29/05 CBI (G) Coating resin (G) 2-propenoic acid,
polymer with
substituted
propanediol
triacrylated
P-05-0582 06/02/05 08/30/05 The Dow Chemical (G) Coating (G) Aspartic ester
Company
P-05-0583 06/02/05 08/30/05 Cytec Industries Inc. (G) Polymeric flow (G) Acrylic modified
and foam control polyester
additive for
industrial coatings
[[Page 36593]]
P-05-0584 06/02/05 08/30/05 CBI (S) Polyurethane (G) Aqueous
coating polyurethane
dispersion
P-05-0585 06/03/05 08/31/05 CBI (S) Solution acrylic (S) 2-propenoic acid,
resin is used as a 2-methyl-, polymer
component in a with butyl 2-methyl-
protective coating 2-propenoate, 1,1-
(paint) dimethylethyl 2-
methyl-2-propenoate
and 2-hydroxyethyl 2-
methyl-2-propenoate,
tert-bu peroxide-
initiated
P-05-0586 06/03/05 08/31/05 Cytec Surface (S) Wetting agent for (G) 2-propenoic acid,
Specialties Inc. industrial coatings 2-methyl-, 2-
hydroxyethyl ester,
homopolymer, ester
with [3-
[(carboxyamino)methy
l]-3,5,5-
trimethylcyclohexyl]
carbamic acid mono[2-
(2-
butoxyethoxy)ethyl]e
ster, [3-
[(carboxyamino)methy
l]-3,5,5-
trimethylcyclohexyl]
carbamic acid mono[2-
(dimethylamino)ethyl
] ester and alkyl
polyester
homopolymer
hydrogen(methyl-1,3-
phenylene)bis[carbam
ate]
P-05-0587 06/02/05 08/30/05 CBI (G) Pulp fiber (S) Endo-1,4-.beta.-
treatment xylanase
P-05-0588 06/06/05 09/03/05 CBI (G) Consumer use - (S)
highly dispersive Cycloheptadecenone
use as an ingredient
in personal care
products; industrial
use - open non-
dispersive use for
the manufacture of
products containing
pmn substance;
commercial use -
open dispersive use
when products used
by professionals on
clients
P-05-0589 06/06/05 09/03/05 CBI (G) Consumer use - (S) Cyclohexanol, 4-
highly dispersive (3-meythylbutyl)-
use as an ingredient
in personal care
products; industrial
use - open non-
dispersive use for
the manufacture of
products containing
pmn substance;
commercial use -
open dispersive use
when products used
by professionals on
clients
P-05-0590 06/06/05 09/03/05 CBI (G) 1. Odor (G) Substituted
eliminator additive. benzenesulfonamide
2. Laser system
additive, 3. Teat
dip additive.
P-05-0591 06/08/05 09/05/05 BASF Corporation (G) Component used in (G) Hexanedioic acid,
the manufacture of polymer with
polyurethane parts aliphatic diols and
diisocyanate
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 43 Notices of Commencement From: 05/11/05 to 06/08/05
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-04-0003 05/25/05 12/01/04 (S) Pichia pastoris strain
gs115
P-02-0283 05/19/05 05/03/05 (S) D-glucopyranose,
homopolymer, 2-ethylhexyl
glycosides
P-02-1002 05/11/05 04/27/05 (S) Benzene, diethenyl-,
polymer with
ethenylbenzene and
ethenylethylbenzene,
phosphonomethylated
sulfonated
P-02-1017 05/26/05 05/23/05 (G) Cationic polyether
P-03-0548 05/24/05 05/17/05 (G) Ethoylated alkyl
alcohol
P-03-0604 05/09/05 04/21/05 (G) Fluorinated
methacrylated monomer
P-03-0650 05/24/05 05/17/05 (G) Organosulfate calcium
hydroxy complex
P-04-0203 06/06/05 05/16/05 (G) Alkanediols, polymer
with carboxylic acid
anhydrides, reacted with
branched alcohol and
carboxylic acid.
P-04-0439 05/18/05 05/06/05 (S) Propanedioic acid, 1-
(3,3-
dimethylcyclohexyl)ethyl
ethyl ester; propanedioic
acid, 3,3,7-
trimethylcycloheptyl
ethyl ester
P-04-0483 06/02/05 05/24/05 (G) Functionalized
poly(meth)acrylic acid
P-04-0525 05/11/05 04/18/05 (G) Alkyl modified
silicone
P-04-0537 05/31/05 05/17/05 (G) Fluorochemical ester
P-04-0596 06/02/05 05/25/05 (G) Alkoxyphenol
[[Page 36594]]
P-04-0627 06/01/05 05/12/05 (G) Unsaturated polyester
benzoate
P-04-0730 06/01/05 05/09/05 (S) Terpenes and
terpenoids, turpentine-
oil, 3-carene fraction,
polymers with phenol
P-04-0806 05/24/05 04/29/05 (G) Phosphonic acid, alkyl-
, alkyl ester
P-04-0837 05/11/05 04/12/05 (G) Blocked aliphatic
polyurethane resin
P-04-0894 06/07/05 05/13/05 (S) Inulin, carboxymethyl
ether, sodium salt
P-04-0905 05/25/05 05/12/05 (G) Polymer of vinyl
heterocycle
P-04-0939 06/08/05 05/25/05 (G) Polysiloxane,
aminoalkyl terminated
polymers with urea
functionality
alkylbenzene
P-04-0957 05/31/05 05/16/05 (S) 2-propenoic acid, 2-
methyl-, polymer with
butyl 2-propenoate,
ethenylbenzene, methyl 2-
methyl-2-propenoate and 2-
methylpropyl 2-methyl-2-
propenoate
P-04-0958 05/31/05 05/16/05 (S) 2-propenoic acid, 2-
methyl-, polymer with
butyl 2-propenoate,
ethenylbenzene, methyl 2-
methyl-2-propenoate and 2-
methylpropyl 2-methyl-2-
propenoate, ammonium salt
P-05-0011 05/27/05 05/17/05 (S) Phosphinic acid,
diethyl-, zinc salt
P-05-0031 06/06/05 05/06/05 (S) Soybean oil, mixed
esters with
pentaerythritol and tung
oil
P-05-0033 05/11/05 04/12/05 (G) Substituted benzene
P-05-0035 06/06/05 05/15/05 (G) Substituted aryl
acetonitrile
P-05-0108 06/03/05 05/11/05 (S) 2-propenoic acid, 2-
methyl-, polymer with 2-
hydroxyethyl 2-methyl-2-
propenoate and methyl 2-
methyl-2-propenoate, 2,2'-
azobis[2-
methylpropanenitrile]-
initiated
P-05-0142 05/12/05 04/29/05 (G) Alkyl acrylate,
polymer with alkyl
acrylate,
alkylacrylamide, and
alkyl acid
P-05-0160 05/24/05 04/26/05 (G) Polyethylene glycol
esters of fatty acids
P-05-0161 05/24/05 04/25/05 (G) Polyethylene glycol
esters of fatty acids
P-05-0226 05/13/05 05/04/05 (G) Polyalkoxylated
aromatic colorant
P-05-0237 05/18/05 04/26/05 (G) Hexamethylene
diisocyanate/carbonate/
caprolactone/ether
prepolymer
P-05-0260 05/19/05 05/10/05 (G)
Aminoalkoxypolysiloxane
P-05-0261 06/06/05 05/22/05 (G) Phenol-substituted
amide
P-05-0279 05/25/05 05/11/05 (G) Polyurethane polymer
P-05-0284 05/18/05 05/08/05 (G) Styrene acrylate
copolymer
P-05-0300 06/01/05 05/06/05 (G) Niobium organic
compound
P-05-0305 05/19/05 05/10/05 (S) Tall-oil pitch,
sapond., sterol-low
P-05-0307 05/16/05 05/12/05 (S) Ruthenium, [1,3-
bis(2,4,6-
trimethylphenyl)-2-
imidazolidinylidene]dichl
oro(phenylmethylene)
(tricyclohexylphosphine)-
, (sp-5-41)-
P-05-0308 05/27/05 05/25/05 (S) 2-propenoic acid,
polymer with
ethenylbenzene and (1-
methylethenyl)benzene,
compound with 2-
aminoethanol
P-05-0334 05/31/05 05/23/05 (S) Aluminum
hydroxycarbonate
P-05-0337 06/06/05 06/01/05 (G)
Diphenylcaprylmethicone
P-92-0979 06/02/05 05/24/05 (G) Blocked aromatic
polyisocyanate
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: June 16, 2005.
Vicki A. Simons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 05-12574 Filed 6-23-05; 8:45 am]
BILLING CODE 6560-50-S