[Federal Register: August 10, 2005 (Volume 70, Number 153)]
[Notices]
[Page 46513-46520]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr10au05-63]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2005-0041; FRL-7730-9]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from June 21, 2005 to July 22, 2005, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
DATES: Comments identified by the docket ID number OPPT-2004-0041 and
the specific PMN number or TME number, must be received on or before
September 9, 2005.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory
Coordinator, Environmental Assistance Division, Office of Pollution
Prevention and Toxics (7408M), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. How Can I Get Copies of this Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket identification (ID) number OPPT-2004-0041. The
official public docket consists of the documents specifically
referenced in this action, any public comments received, and other
information related to this action. Although a part of the official
docket, the public docket does not include Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute. The official public docket is the collection of materials
that is available for public viewing at the EPA Docket Center, Rm.
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington,
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The EPA Docket Center Reading
Room telephone number is (202) 566-1744 and the telephone number for
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide
[[Page 46514]]
a reference to that material in the version of the comment that is
placed in EPA's electronic public docket. The entire printed comment,
including the copyrighted material, will be available in the public
docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the photograph
will be placed in EPA's electronic public docket along with a brief
description written by the docket staff.
C. How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number and specific PMN number or TME number in
the subject line on the first page of your comment. Please ensure that
your comments are submitted within the specified comment period.
Comments received after the close of the comment period will be marked
``late.'' EPA is not required to consider these late comments. If you
wish to submit CBI or information that is otherwise protected by
statute, please follow the instructions in Unit I.D. Do not use EPA
Dockets or e-mail to submit CBI or information protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/
, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPPT-2004-0041. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov,
Attention: Docket ID Number OPPT-2004-0041 and PMN Number or TME
Number. In contrast to EPA's electronic public docket, EPA's e-mail
system is not an ``anonymous access'' system. If you send an e-mail
comment directly to the docket without going through EPA's electronic
public docket, EPA's e-mail system automatically captures your e-mail
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the
official public docket, and made available in EPA's electronic public
docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Document Control Office (7407M),
Office of Pollution Prevention and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
3. By hand delivery or courier. Deliver your comments to: OPPT
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number
OPPT-20040041 and PMN Number or TME Number. The DCO is open from 8 a.m.
to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930.
D. How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the technical person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the notice or collection
activity.
7. Make sure to submit your comments by the deadline in this
document.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action and the specific PMN number you are
commenting on in the subject line on the first page of your response.
You may also provide the name, date, and Federal Register citation.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
[[Page 46515]]
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from June 21, 2005 to July 22, 2005,
consists of the PMNs pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 70 Premanufacture Notices Received From: 06/21/05 to 07/22/05
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-05-0626 06/21/05 09/18/05 Arkema Inc. (S) Chemical (S) Thiols, C11 13-
intermediate for tertiary, C12-rich,
sulfuric acid manufacture. of, C12-
production rich C11 13 alkene-
based, distn.
residues, high-
boiling fraction
P-05-0627 06/21/05 09/18/05 Arkema Inc. (S) Chemical (S) Thiols, C11 13-
intermediate for tertiary, C12-rich,
sulfuric acid manufacture. of,
production propylene tetramer-
based, distn.
residues, high-
boiling fraction
P-05-0628 06/21/05 09/18/05 Arkema Inc. (S) Chemical (S) Thiols, C11 13-
intermediate for tertiary, C12-rich,
sulfuric acid manufacture of, C12-
production rich C11 13 alkenes-
based, distn.
residues, middle-
boiling fraction
P-05-0629 06/21/05 09/18/05 Arkema Inc. (S) Chemical (S) Thiols, C11 13-
intermediate for tertiary, C12-rich,
sulfuric acid manufacture. of,
production propylene tetramer-
based, distn.
residues, middle-
boiling fraction
P-05-0630 06/21/05 09/18/05 Arkema Inc. (S) Chemical (S) Thiols, C11 13-
intermediate for tertiary, C12-rich,
sulfuric acid manufacture. of, C12-
production rich C11 13 alkenes-
based, distn.
residues, low-
boiling fraction
P-05-0631 06/21/05 09/18/05 Arkema Inc. (S) Chemical (S) Thiols, C11 13-
intermediate for tertiary, C12-rich,
sulfuric acid manufacture of,
production propylene tetramer-
based, distn.
residues, low-
boiling fraction
P-05-0632 06/22/05 09/19/05 The Dow Chemical (S) Flame retardant (G) Cresole novolac,
Company for epoxy resins to methyl-phosphinate
be used for printed substituted
circuit boards
P-05-0633 06/22/05 09/19/05 BASF Corporation (S) Component of (G) Alkylsubstituted
multipurpose polyalkene glycol
additive in gasoline monoalkylether
P-05-0634 06/23/05 09/20/05 CBI (G) Toner additive (G) Metal silicate
P-05-0635 06/23/05 09/20/05 CBI (G) A component used (S) Silica,
in an industrial [[dimethoxy[3-
coating for plastic [[[[[1,3,3-trimethyl-
5-[[[3-[(1-oxo-2-
propenyl) oxy]2,2bis
[[(oxopropenyl)oxy]m
ethyl]propoxy]carbon
yl]
amino]cyclohexyl]
methyl]amino]carbony
l]thio]
propyl]silyl]oxy]-
modified
P-05-0636 06/27/05 09/24/05 CBI (S) Acrylic-modified (S) Fatty acids,
alkyd resin is used C16 18, polymers
as a coating with bu acrylate, 2-
component for hydroxyethyl
automotive methacrylate,
applications phthalic anhydride,
styrene, 3,5,5-
trimethylhexanoic
acid and
trimethylolpropane
P-05-0637 06/27/05 09/24/05 CBI (S) Alkyd resin (S) Fatty acids,
solution is used as C8 18 and C18-
a coating component unsaturated,
for finishing of polymers with
automobiles ethylene glycol,
glycerol, maleic
anhydride and
phthalic anhydride
P-05-0638 06/27/05 09/24/05 CBI (S) Alkyd resin (S) Castor oil,
solution is used as dehydrated, polymer
a component for with benzoic acid,
automotive phthalic anhydride
applications and
trimethylolpropane
[[Page 46516]]
P-05-0639 06/27/05 09/24/05 CBI (S) Solution acrylic (S) 2-propenoic acid,
resin is used as a 2-methyl-, polymer
component in an with butyl 2-methyl-
industrial coating 2-propenoate,
ethenylbenzene,
methyl 2-methyl-2-
propenoate, 2-
methylpropyl 2-
methyl-2-propenoate
and 1,2-propanediol
mono(2-methyl-2-
propenoate), tert-bu
benzenecarboperoxoat
e-initiated
P-05-0640 06/24/05 09/21/05 CBI (G) Pigment (G) Polyether amido
dispersant acid polyamine
derivative
P-05-0641 06/27/05 09/24/05 CBI (G) Cosmetic (G) Copolymer of
applications alkyl methacrylates,
methacrylic acid,
alkyl acrylates,
dimethyl aminomethyl
methacrylate and
polyethoxy modified
acrylic and
methacrylic acid
P-05-0642 06/28/05 09/25/05 CBI (G) Metal working (G) Amides, tall-oil
fluid additive fatty, substituted,
ethoxylated
P-05-0643 06/29/05 09/26/05 CBI (G) Water treating (G)
chemical Phosphonomethylated
amine
P-05-0644 06/30/05 09/27/05 CIBA Specialty (S) High molecular (G) 2-propenoic acid
Chemicals weight dispersant ester polymer,
Corporation for pigment compound with
deflocculation in substituted aromatic
coatings and inks derivative
P-05-0645 06/30/05 09/27/05 CBI (S) Polymer viscosity (G) Diamide additive
depressent for use
in garment industry
P-05-0646 07/05/05 10/02/05 Seppic, Inc. (S) Surfactant in (G) Rape oil fatty
industrial soaps; acids
surfactants in
industrial
degreasers;
emusifiers in soaps,
degreasers,
metalworking fluids;
lubricant in
metalworking fluids
P-05-0647 07/06/05 10/03/05 The Dow Chemical (G) Stabilizer (G) Substituted
Company oxidized pipridinyl
derivative
P-05-0648 07/06/05 10/03/05 Dover Chemical (S) Stabilizer (S) Phosphorus acid,
Corpation component for mixed C10-rich C9 11-
flexible pvc isoalkyl and 4-(1-
methyl-1-
phenylethyl)phenyl
triesters
P-05-0649 07/06/05 10/03/05 Ashland Inc., (G) Adhesive (G) Benzene,1,1'-
Environmental Health methylenebis[isocyan
and Safety ato-, polymer with 2-
propenoic acid, 2-
hydroxyethyl ester
and lexorez 1180-35
and lexorez 1640-35
P-05-0650 07/06/05 10/03/05 CBI (S) Sealant (G) Silylated
formulations polyalkyleneoxide
P-05-0651 07/07/05 10/04/05 Cognis Corporation (G) Polyalkylene (S) Poly[oxy(methyl-
glycol polymer, 1,2-ethanediyl)],
lubricant for .alpha.-methyl-
refrigeration .omega.-[(tetrahydro-
compressors 2-furanyl)methoxy]-
(contained use)
P-05-0652 07/08/05 10/05/05 CBI (S) A component in (G) Cyclohexane, 5-
ultraviolet-, isocyanato-1-
visibile light and (isocyanatomethyl)-
electron beam 1,3,3-trimethyl-,
curable formulations polymers with
hydroxy-terminated
unsaturated
hydrocarbon chain, 2-
hydroxyethyl
acrylate-blocked
P-05-0653 07/08/05 10/05/05 CBI (G) Printing and (G) Acrylic copolymer
packaging
P-05-0654 07/11/05 10/08/05 Meadwestvaco (S) Asphalt (G) Amines,
Corpation - emulsifier precursor polyethylenepoly-,
Specialty Chemicals reaction products
Division with 5 (or 6) -
carboxy-4-hexyl-2-
cyclohexene-1-
octanoic acid,
substituted
ethyleneamines and
pentaethylenehexamin
e, hydrochlorides
P-05-0655 07/11/05 10/08/05 Meadwestvaco (S) Asphalt (G) Amines,
Corpation - emulsifier precursor polyethylenepoly-,
Specialty Chemicals reaction products
Division with 5 (or 6) -
carboxy-4-hexyl-2-
cyclohexene-1-
octanoic acid,
substituted
polyamines and
pentaethylenehexamin
e, hydrochlorides
P-05-0656 07/11/05 10/08/05 Meadwestvaco (S) Asphalt (G) Amines,
Corpation - emulsifier precursor polyethylenepoly-,
Specialty Chemicals reaction products
Division with 5 (or 6) -
carboxy-4-hexyl-2-
cyclohexene-1-
octanoic acid,
substituted
ethyleneamines and
pentaethylenehexamin
e
[[Page 46517]]
P-05-0657 07/11/05 10/08/05 Meadwestvaco (S) Asphalt (G) Amines,
Corpation - emulsifier precursor polyethylenepoly-,
Specialty Chemicals reaction products
Division with 5 (or 6) -
carboxy-4-hexyl-2-
cyclohexene-1-
octanoic acid,
substituted
polyamines and
pentaethylenehexamin
e
P-05-0658 07/11/05 10/08/05 Meadwestvaco (S) Hydrocarbon resin (G) Rosin modified
Corpation - for lithographic aromatic acid,
Specialty Chemicals inks polymer with
Division phenols, petroleum
naphtha hydrocarbons
and petroleum
distillates
P-05-0659 07/11/05 10/08/05 Meadwestvaco (S) Hydrocarbon resin (G) Rosin modified
Corpation - for lithographic aromatic acid,
Specialty Chemicals inks polymer with
Division phenols, petroleum
naphtha and
petroleum
distillates
P-05-0660 07/11/05 10/08/05 Meadwestvaco (S) Hydrocarbon resin (G) Rosin modified
Corpation - for lithographic aromatic acid,
Specialty Chemicals inks polymer with
Division phenols, aromatic
hydrocarbons and
petroleum
distillates
P-05-0661 07/11/05 10/08/05 CBI (G) Lubricating (G) Bis-n-octyl mdi
grease thickening diureide
system
P-05-0662 07/11/05 10/08/05 CBI (G) Lubricating (G) N-octyl,n-
grease thickening octadecyl mdi
system diureide
P-05-0663 07/11/05 10/08/05 CBI (G) Lubricating (G) Bis-n-octadecyl
grease thickening mdi diureide
system
P-05-0664 07/12/05 10/09/05 CBI (G) Viscosity (G) Halogenated n,n,n-
enhancer for water- trialkyl-
soluble polymers alkylamminium, n-
aminocarbonylalkenyl
P-05-0665 07/07/05 10/04/05 CBI (G) Catalyst (S) Phosphoric acid,
bis(2-ethylhexyl)
ester, neodymium(3+)
salt
P-05-0666 07/13/05 10/10/05 CBI (G) Adhesive / (G) Polymer of
sealant component substituted
carbomonocyclic
isocyanates and
polyalkylene ether
polyols
P-05-0667 07/14/05 10/11/05 Bedoukian Research, (S) Fragrance uses as (S) Phenol, 2-ethoxy-
Inc. per the Federal 4-(4,4,6-trimethyl-
Food, Drug, and 1,3-dioxan-2-yl)-
Cosmetic Act FFDCA
(FFDCA); fragrance
uses; scented
papers, detergents,
candles, etc
P-05-0668 07/14/05 10/11/05 CBI (G) Additive, open, (G) Maleic anhydride,
non-dispersive use adipic acid,
propylene glycol,
polyglycol copolymer
P-05-0669 07/14/05 10/11/05 CBI (G) Additive, open, (G) Maleic anhydride,
non-dispersive use adipic acid,
propylene glycol,
polyglycol copolymer
P-05-0670 07/14/05 10/11/05 CBI (G) Additive, open, (G) Maleic anhydride,
non-dispersive use adipic acid,
propylene glycol,
polyglycol copolymer
P-05-0671 07/15/05 10/12/05 DIC International (G) Additive (G) Alkyl imide
(USA) LLC condensate of chloro
triaryl diamine
dione
P-05-0672 07/14/05 10/11/05 CBI (G) Consumer use - (S)
highly dispersive Cyclohexadecanone,
use as an ingredient .beta.(or 9)-methyl-
in personal care , didehydro
products; industrial derivative
use - open non-
dispersive use for
the manufacture of
products containing
pmn substance;
commercial use -
open dispersive use
when products used
by professionals on
clients
P-05-0673 07/14/05 10/11/05 CBI (G) Additive, open, (G) Siloxane coated
non-dispersive use silica nanoparticles
P-05-0674 07/13/05 10/10/05 CBI (S) Component of (G) Polymerized rosin
aqueous tackifier amine salt
dispersion for
pressure sensitive
labels
P-05-0675 07/15/05 10/12/05 CBI (G) Component of (G) Aliphatic
coating for acrylated, aliphatic
decorative amine
applications
P-05-0676 07/15/05 10/12/05 CBI (G) Component of (G) Aliphatic
coating for acrylated, aliphatic
decorative amine
applications
P-05-0677 07/15/05 10/12/05 BASF Corporation (G) Additive (G) Dialkyl carbonate
epoxy polymer with
substituted triol
P-05-0678 07/15/05 10/12/05 CBI (G) Component in the (G) Modified
manufacture of paper polyacrylamide
P-05-0679 07/14/05 10/11/05 CBI (G) Additive, open, (G) Alkoxy modified
non-disperive use polydimethylsiloxane
[[Page 46518]]
P-05-0680 07/14/05 10/11/05 CBI (G) Additive, open, (G) Alkoxy modified
non-disperive use polydimethylsiloxane
P-05-0681 07/18/05 10/15/05 CBI (G) Processing aid (G) Polyoxyethylene
alkyl phosphoether
salt
P-05-0682 07/18/05 10/15/05 CIBA Specialty (S) A pretreatment (G) Substituted alkyl
Chemicals Corpation for ink jet printing sulfonic acid amino
of nylon fabrics oxy homopolymer
potassium salt
P-05-0683 07/20/05 10/17/05 CBI (S) Component of inks (G) Phenolic modified
rosin resin
P-05-0684 07/20/05 10/17/05 CBI (S) Component of inks (G) Phenolic modified
rosin resin
P-05-0685 07/20/05 10/17/05 CBI (S) Component of inks (G) Phenolic modified
rosin resin
P-05-0686 07/18/05 10/15/05 CBI (G) Textile colorant (G) Substituted
sulfonated phenyl
azo naphthalene
P-05-0687 07/20/05 10/17/05 CBI (G) Additive, open, (G) Siloxane coated
non-dispersive use alumina
nanoparticles
P-05-0688 07/20/05 10/17/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Environmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, 1,6-
hexanediyl di-2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
and 2-phenoxyethyl 2-
propenoate, reaction
products with
alkylamine
P-05-0689 07/20/05 10/17/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Environmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, 1,6-
hexanediyl di-2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
and 2-phenoxyethyl 2-
propenoate, reaction
products with
alkanolamine
P-05-0690 07/20/05 10/17/05 Ashland Inc., (G) Adhesive, (G) 2-propenoic acid,
Environmental Health coating, ink 1,6 hexanediyl
and Safety ester, polymer with
(chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
.beta.-diketone and
2-phenoxyethyl 2-
propenoate, reaction
products with
alkylamine
P-05-0691 07/20/05 10/17/05 Ashland Inc., (G) Adhesive, (G) 2-propenoic acid,
Environmental Health coating, ink 1,6 hexanediyl
and Safety ester, polymer with
(chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy[poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
.beta.-diketone and
2-phenoxyethyl 2-
propenoate, reaction
products with
alkanolamine
[[Page 46519]]
P-05-0692 07/20/05 10/17/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Environmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, 1,6-
hexanediyl di-2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
.beta.-diketone and
2-phenoxyethyl 2-
propenoate, reaction
products with
alkylamine
P-05-0693 07/20/05 10/17/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Environmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate, 1,6-
hexanediyl di-2-
propenoate, .alpha.-
hydro-.omega.-[(1-
oxo-2-
propenyl)oxy]poly(ox
y-1,2-ethanediyl)
ether with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol (3:1),
.beta-diketone and 2-
phenoxyethyl 2-
propenoate, reaction
products with
alkanolamine
P-05-0694 07/20/05 10/17/05 CBI (G) Antistatic agent (G) Polyalkylene
for resin (polymer glycol aryl ether,
additives) reaction products
with formaldehyde
P-05-0695 07/21/05 10/18/05 CBI (G) Raw material used (G) Coplymer of
in the manufacture acrylonitrile,
of photographic methyl methacrylate
products and monosubstituted
acrylamide
P-05-0696 07/22/05 10/19/05 Tremco Inc. (G) Waterproof (G) Polyether
sealant and filler polyurethane
for construction use derivative polymer
in industrial and
commercial
applications
P-05-0697 07/22/05 10/19/05 Tremco Inc. (G) Waterproof (G) Polyether
sealant and filler polyurethane
for construction use derivative polymer
in industrial and
commercial
applications
P-05-0698 07/22/05 10/19/05 Tremco Inc. (G) Waterproof (G) Polyether
sealant and filler polyurethane
for construction use derivative polymer
in industrial and
commercial
applications
P-05-0699 07/22/05 10/19/05 Tremco Inc. (G) Waterproof (G) Polyether
sealant and filler polyurethane
for construction use derivative polymer
in industrial and
commercial
applications
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 44 Notices of Commencement From: 06/21/05 to 07/22/05
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-01-0906 06/28/05 06/18/05 (G) Saturated and
unsaturated fatty acids,
esters with a polyalcohol
P-02-0880 06/21/05 06/15/05 (G) Castor oil, mixed
esters with carboxylic
acid anhydrides
P-02-0934 07/13/05 06/17/05 (G) Magnesium sulfonate
P-04-0046 07/08/05 05/03/05 (G) Polyether carboxylate
P-04-0136 06/23/05 10/20/04 (G) Polyetherimide polymer
P-04-0155 07/07/05 06/30/05 (S) Glycine, n,n'-(1r,2r)-
1,2-cyclohexanediylbis[n-
(carboxymethyl)-, rel-
P-04-0512 07/01/05 05/19/05 (G) Polyurethane resin
P-04-0523 07/18/05 06/14/05 (G) Condensation polymer
of anhydride, polyol and
terminating agent
P-04-0665 07/06/05 06/16/05 (G) Water dispersable
polyurethane polymer
P-04-0666 07/06/05 05/28/05 (G) Polyurethane
prepolymer
P-04-0679 06/21/05 06/08/05 (S) 1,3-
isobenzofurandione,
polymer with 1,3-
diisocyanatomethylbenzene
and 2,2'-oxybis[ethanol],
2-hydroxyethyl acrylate-
blocked
P-04-0819 07/18/05 06/28/05 (G) Oil / phenolic
modified resin
P-04-0881 06/21/05 06/15/05 (G) Quaternary amino
modified silicone-
polyether copolymer
P-04-0946 07/13/05 06/23/05 (G) Multifunctional
acrylate oligomer resin
P-05-0032 07/07/05 06/15/05 (S) Silicic acid (h4sio4),
tris(1,1-dimethylpropyl)
ester
P-05-0102 07/13/05 07/01/05 (G) Polyether polyurethane
P-05-0150 06/22/05 06/16/05 (S) Siloxanes and
silicones, di-me, lauryl
me
P-05-0210 07/05/05 06/07/05 (G) Vegetable oil,
modified products
[[Page 46520]]
P-05-0211 07/05/05 06/07/05 (G) Hydrogenated modified
vegetable oil
P-05-0218 07/18/05 07/07/05 (S) Fatty acids, coco,
polymers with adipic
acid, pentaerythritol,
succinic anhydride
monopolyisobutylene
derivs. and
trimethylolpropane
P-05-0241 06/24/05 06/22/05 (G) Glucomannan
P-05-0250 07/13/05 06/21/05 (G) Allyl compounds,
copolymers with
unsaturated acids
P-05-0288 07/12/05 06/20/05 (G) Tall oil modified
aromatic acrylic polymer
P-05-0289 07/12/05 06/24/05 (G) Tall oil modified
aromatic acrylic polymer,
ammonium salt
P-05-0302 07/20/05 07/07/05 (S) 1,3-dioxane-2-ethanol,
5-ethyl-5-(hydroxymethyl)-
.beta.,.beta.-dimethyl-
P-05-0316 07/13/05 06/30/05 (S) Siloxanes and
silicones, di-me, 3-
hydroxypropyl me, me
octyl, ethoxylated
P-05-0327 07/12/05 06/24/05 (G) Amine salt of styrene
acrylic polymer
P-05-0340 07/06/05 06/14/05 (G) Blocked polyurethane
P-05-0341 07/06/05 06/30/05 (G) Blocked polyurethane
P-05-0343 06/21/05 06/06/05 (G) Siloxanes and
silicones, di-me, alkoxy
aryl, polymers with aryl
silsesquioxanes, alkoxy-
terminated, polymers with
epichlorohydrin and 4,4'-
(1-alkylidene) bis
[cycloalkanol]
P-05-0346 06/22/05 06/07/05 (G) Polyester resin
P-05-0361 07/13/05 06/24/05 (G) Siloxanes and
silicones, di-me, 3-(2-
hydroxyalkoxy)-1-[(2-
hydroxyalkoxy)alkyl]-1-
alkenyl me
P-05-0375 06/22/05 06/13/05 (G) Sma ester potassium
salt
P-05-0376 06/22/05 06/13/05 (G) Sma ester sodium salt
P-05-0379 06/21/05 06/10/05 (G) Isocyanate functional
polyester urethane
polymer
P-05-0380 07/05/05 06/09/05 (G) Benzene, 1,1'-
methylenebis[4-isocyanato-
, polymer with
benzenedicarboxylic acid,
butyl dialkyl ester,
poly[oxy(methyl-1,2-
ethanediyl)], .alpha.-
hydro--hydroxy-, oxirane,
alkyll-, polymer with
oxirane, ether with
propanepolyol and
sartomer's hlbh p-3000
and lexorez 1180
P-05-0424 07/06/05 06/14/05 (G) Nh2-terminated
polyurethane prepolymer
P-05-0430 06/29/05 06/22/05 (G) Substituted
benzotriazole
P-05-0457 07/11/05 06/29/05 (G) Styrene,
cycloaliphatic acrylate,
alkyl
acrylates,hydroxyalkyl
methacrylate copolymer
P-05-0461 07/18/05 07/07/05 (G) Substituted copper
naphthalene sulfonic acid
hydroxyethyl sulfono azo
salt
P-05-0475 07/11/05 07/06/05 (G) Acetoacetate
functional acrylic polyol
P-98-0448 07/11/05 06/17/05 (S) 2-propenoic acid, 2-
methyl-, polymer with
butyl 2-methyl-2-
propenoate, butyl 2-
propenoate,
ethenylbenzene and 2-
hydroxyethyl 2-
propenoate, tert-bu
peroxide-initiated
P-98-1068 07/06/05 06/30/05 (G) Polycaprolactone
polyols
P-99-1396 07/13/05 06/29/05 (G) Polyester polyether
isocyanate polymer
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices
Dated: August 2, 2005.
Darryl S. Ballard,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 05-15841 Filed 8-9-05; 8:45 am]
BILLING CODE 6560-50-S