[Federal Register: March 14, 2005 (Volume 70, Number 48)]
[Notices]
[Page 12478-12485]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr14mr05-71]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2005-0016; FRL-7704-9]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from January 20, 2005 to February 18, 2005, consists of the PMNs
and TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the docket ID number OPPT-2005-0016 and
the specific PMN number or TME number, must be received on or before
April 13, 2005.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. How Can I Get Copies of this Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket identification (ID) number OPPT-2005-0016. The
official public docket consists of the documents specifically
referenced in this action, any public comments received, and other
information related to this action. Although a part of the official
docket, the public docket does not include Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute. The official public docket is the collection of materials
that is available for public viewing at the EPA Docket Center, Rm.
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington,
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The EPA Docket Center Reading
Room telephone number is (202) 566-1744 and the telephone number for
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
[[Page 12479]]
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide a reference to that
material in the version of the comment that is placed in EPA's
electronic public docket. The entire printed comment, including the
copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the photograph
will be placed in EPA's electronic public docket along with a brief
description written by the docket staff.
C. How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number and specific PMN number or TME number in
the subject line on the first page of your comment. Please ensure that
your comments are submitted within the specified comment period.
Comments received after the close of the comment period will be marked
``late.'' EPA is not required to consider these late comments. If you
wish to submit CBI or information that is otherwise protected by
statute, please follow the instructions in Unit I.D. Do not use EPA
Dockets or e-mail to submit CBI or information protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/
, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPPT-2005-0016. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov,
Attention: Docket ID Number OPPT-2005-0016 and PMN Number or TME
Number. In contrast to EPA's electronic public docket, EPA's e-mail
system is not an ``anonymous access'' system. If you send an e-mail
comment directly to the docket without going through EPA's electronic
public docket, EPA's e-mail system automatically captures your e-mail
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the
official public docket, and made available in EPA's electronic public
docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Document Control Office (7407M),
Office of Pollution Prevention and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
3. By hand delivery or courier. Deliver your comments to: OPPT
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number
OPPT-20050016 and PMN Number or TME Number. The DCO is open from 8 a.m.
to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930.
D. How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be
[[Page 12480]]
disclosed except in accordance with procedures set forth in 40 CFR part
2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the technical person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the notice or collection
activity.
7. Make sure to submit your comments by the deadline in this
document.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action and the specific PMN number you are
commenting on in the subject line on the first page of your response.
You may also provide the name, date, and Federal Register citation.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from January 20, 2005 to February 18,
2005, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 89 Premanufacture Notices Received From: 01/20/05 to 02/18/05
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-05-0246 01/21/05 04/20/05 CBI (G) Catalyst (G) Sodium salt of a
sulfonic acid
derivative
P-05-0247 01/21/05 04/20/05 CBI (G) Printing ink (G) 3-phenylimino-6-
oxo-1,4-
cyclohexadiene
derivative
P-05-0248 01/21/05 04/20/05 CBI (G) Printing ink (G) 5-amino-4-
nitrophenylazo-1-
phenylpirazole
derivative
P-05-0249 01/21/05 04/20/05 CBI (G) Additive, open, (G) Allyl compounds,
non-dispersive use copolymers with
unsaturated acids
P-05-0250 01/21/05 04/20/05 CBI (G) Additive, open, (G) Allyl compounds,
non-dispersive use copolymers with
unsaturated acids
P-05-0251 01/21/05 04/20/05 CBI (G) Semiconductor (G) Hydroxy
coating aromatics, polymer
with fluorinated
aromatics
P-05-0252 01/24/05 04/23/05 Henkel Corporation (S) A component of (S) 1,3-butadiene,
adhesives for homopolymer, hydroxy-
bonding, sealing, terminated,
encapsulating and bis[[[(isocyanatophe
potting nyl)methyl]
phenyl]carbamate]
P-05-0253 01/24/05 04/23/05 Ashland Inc., (G) Adhesive, (G) 2-propenoic acid,
Environmental Health coating, ink bis
and Safety (alkyldiyliminocarbo
nyloxy-2,1-
ethanediyl) ester
P-05-0254 01/24/05 04/23/05 Ashland Inc., (G) Adhesive, (G) Alkanoic acid,
Environmental Health coating, ink bis
and Safety (alkyldiyliminocarbo
nyloxy)]bis-, bis[6-
oxo-6-[2-[1-oxo-2-
propenyl] oxy]
ethoxy] hexyl] ester
P-05-0255 01/24/05 04/23/05 Ashland Inc., (G) Adhesive, (G)
Environmental Health coating, ink Dioxadiazaalkanoic
and Safety acid, 2-[(1-oxo-2-
propenyl) oxy]ethyl
ester
P-05-0256 01/24/05 04/23/05 Ashland Inc., (G) Adhesive, (G)
Environmental Health coating, ink Dioxadiazaalkanoic
and Safety acid, bis[2-[(1-oxo-
2-propenyl)
oxy]ethyl] ester
[[Page 12481]]
P-05-0257 01/24/05 04/23/05 Ashland Inc., (G) Adhesive, (G) 2-propenoic acid,
Environmental Health coating, ink 2-[[[[[alkyl- [[[2-
and Safety [(1-oxo-2-
propenyl)oxy]alkoxy]
carbonyl] amino]
alkyl]methyl]amino]c
arbonyl]oxy] ethyl
ester
P-05-0258 01/24/05 04/23/05 Ashland Inc., (G) Adhesive, (G) Diisocyanato
Environmental Health coating, ink alkane homopolymer,
and Safety 2-hydroxyethyl
acrylate-blocked
P-05-0259 01/25/05 04/24/05 Henkel Corporation (S) A component of (S)
adhesive Tricyclodecanedimeth
formulations for anol, polymer with
general industrial 2,4-diisocyanato-1-
bonding applications methylbenzne and
.alpha.-hydro-
.omega.-
hydroxypoly(oxy-1,4-
butanediyl), 2-
hydroxyethyl
acrylate-blocked
P-05-0260 01/25/05 04/24/05 CBI (S) Adhesion promoter (G)
for window sealant aminoalkoxpolysiloxa
(at oem) ne
P-05-0261 01/26/05 04/25/05 CBI (G) Reactant used in (G) Phenol-
internal manufacture substituted amide
of polymers
P-05-0262 01/26/05 04/25/05 CBI (S) Chemical (G) Halogenated
intermediate alkene
P-05-0263 01/26/05 04/25/05 CBI (G) Functional (G) Acrylic copolymer
coating polymer
P-05-0264 01/28/05 04/27/05 CBI (S) Resin for (G) Amine functional
coatings applied by epoxy resin salted
electrodeposition with organic acid
P-05-0265 01/28/05 04/27/05 CBI (S) Resin for (G) Amine functional
coatings applied by epoxy resin salted
electrodeposition with organic acid
P-05-0266 01/28/05 04/27/05 CBI (S) Resin for (G) Amine functional
coatings applied by epoxy resin salted
electrodeposition with organic acid
P-05-0267 01/28/05 04/27/05 Wacker Silicones a (S) Crosslinker in (G) Polydimethyl
Division of Wacker elastomer products fluoroalkyl hydrogen
Chemical Corporation siloxane
P-05-0268 01/28/05 04/27/05 Macdermid (G) Photocure (G) Oxirane, methyl-,
Incorporated polymer, open non- polymer with 1,3-
dispersive use diisocyanatomethylbe
nzene, alpha-hydro-
omega-
hydroxypoly[oxy(meth
yl-1,2-ethanediyl)]
and oxirane,
poly(alkyl)glycol
acrylate-blocked
P-05-0269 01/31/05 04/30/05 CBI (G) softening of (G) Polyethanolamine
cellulose diester with fatty
acids dialkyl
sulfate salts
P-05-0270 01/31/05 04/30/05 CBI (S) softening of (G) Polyethanolamine
cellulose diester with fatty
acids dialkyl
sulfate salts
P-05-0271 01/31/05 04/30/05 CBI (S) softening of (G) Polyethanolamine
cellulose diester with fatty
acids dialkyl
sulfate salts
P-05-0272 01/31/05 04/30/05 CBI (S) softening of (G) Polyethanolamine
cellulose diester with fatty
acids dialkyl
sulfate salts
P-05-0273 02/01/05 05/01/05 Surface Specialties, (S) Dispersant for (G) Alkanolactone,
Inc. industrial coatings polymer with
concentrates substituted 2h-pyran-
2-one, 2-(2-
butoxyethoxy)ethyl
ester, phosphate
P-05-0274 02/01/05 05/01/05 CBI (G) Open, non- (G) Polyester
dispersive carbonate-based
(component of polyurethane-
leather finishing polyurea
system)
P-05-0275 02/01/05 05/01/05 CBI (G) Ultra violet (G) Di(alkyl phenyl)
photoinitiator iodonium
hexafluoroantimonate
P-05-0276 02/01/05 05/01/05 CBI (G) Paint component (G) Rare earth salt
of a carboxylic acid
P-05-0277 01/24/05 04/23/05 Global Matrechs, Inc (S) Flooring; top (G) Urethane
clear coating containing polyamine
P-05-0278 01/24/05 04/23/05 Global Matrechs, Inc (S) Paints; top clear (G) Urethane
coatings containing polyamine
P-05-0279 02/01/05 05/01/05 CBI (G) Panel laminating (G) Polyurethane
adhesive polymer
P-05-0280 01/24/05 04/23/05 Global Matrechs, Inc (S) Paints; top clear (G) Urethane
coatings containing polyamine
P-05-0281 02/02/05 05/02/05 Global Matrechs, Inc (S) Flooring; paints; (G) Aliphatic
top clear coatings cyclocarbonate
P-05-0282 02/03/05 05/03/05 CBI (G) Polymerization (G) Bis(polyalkyl-
aid alkoxy-
polyheteroatom
containing alkanoic
acid) derivative
P-05-0283 02/03/05 05/03/05 CBI (G) Polymerization (G) Polyalkyl-alkoxy-
aid polyheteroatom
containing alkanoic
acid
P-05-0284 02/03/05 05/03/05 CBI (G) Open, non- (G) Styrene acrylate
dispersive use copolymer
P-05-0285 02/04/05 05/04/05 CBI (G) Fuel additive (G) Butanedioic acid,
monopolyisobutylene
derivatives.,
ethylene esters,
compounds with
alkanolamine (1:2)
[[Page 12482]]
P-05-0286 02/04/05 05/04/05 CBI (S) Hydraulic (G) Aklyl phosphonate
fracturing additive
P-05-0287 02/07/05 05/07/05 Applied Power (G) A bioremediation (S) Glycerides, tall-
Concepts, Inc. material for oil di-, mono [2-[2-
chlorinated [2-(2-hydroxy-1-
hydrocarbons. oxopropoxy)-1-
oxopropoxyl]-1-
oxopropoxy]propanoat
es]
P-05-0288 02/07/05 05/07/05 Meadwestvaco (S) Rosin/acrylic (G) Tall oil modified
Corporation - support resin for aromatic acrylic
Specialty Chemicals printing inks polymer
Division
P-05-0289 02/07/05 05/07/05 Meadwestvaco (S) Rosin/acrylic (G) Tall oil modified
Corporation - support resin for aromatic acrylic
Specialty Chemicals printing inks polymer, ammonium
Division salt
P-05-0290 02/07/05 05/07/05 PPG Industries, Inc. (G) Component of an (G) Alkanediocic
automotive refinish acid, polymer with
direct-gloss topcoat 1,3,5-
tris(substituted
alkyl)-1,3,5-
triazine-
2,4,6(1h,3h,5h)-
trione, alkanoate
(ester) 3-
substituted-2-
(substituted alkyl)-
2-alkanoate (ester)
P-05-0291 02/08/05 05/08/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6',6''-(1,3,5-
metalworking fluids triazine-2,4,6-
triyltriimino)tris-,
compound with 2-
aminoethanol
P-05-0292 02/08/05 05/08/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6',6''-(1,3,5-
metalworking fluids triazine-2,4,6-
triyltriimino)tris-,
compound with 2-
amino-2-methyl-1-
propanol
P-05-0293 02/08/05 05/08/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6',6''-(1,3,5-
metalworking fluids triazine-2,4,6-
triyltriimino)tris-,
compound with 1-
amino-2-propanol
P-05-0294 02/08/05 05/08/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6',6''-(1,3,5-
metalworking fluids triazine-2,4,6-
triyltriimino)tris-,
compound with
1,1',1''-
nitrilotris[2-
propanol]
P-05-0295 02/08/05 05/08/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6',6''-(1,3,5-
metalworking fluids triazine-2,4,6-
triyltriimino)tris-,
compound with 1,1'-
iminobis[2-propanol]
P-05-0296 02/08/05 05/08/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6',6''-(1,3,5-
metalworking fluids triazine-2,4,6-
triyltriimino)tris-,
compound with 2-(2-
aminoethoxy)ethanol
P-05-0297 02/08/05 05/08/05 CBI (S) Polyurethane (G) Aqueous
coating; polyurethane
polyurethane dispersion
adhesive
P-05-0298 02/08/05 05/08/05 CBI (G) Open, non- (G) Styrene acrylate
dispersive use copolymer
P-05-0299 02/09/05 05/09/05 Zeon Chemicals L.P. (S) Automotive timing (G) Modified
belts; oilfield acrylonitrile-
wellhead seals, blow- butadiene polymer
out preventers
P-05-0300 02/02/05 05/02/05 Reference Metals (G) Niobium precursor (G) Niobium organic
Company Inc. compound
P-05-0301 02/08/05 05/08/05 CBI (G) Hardener for (G) Trisphenol
epoxy resin
P-05-0302 02/08/05 05/08/05 Mitsubishi Gas (S) Reactant to form (S) 1,3-dioxane-2-
Chemical America, ingredient for use ethanol, 5-ethyl-5-
Inc. in ultra violet (hydroxymethyl)-
cured paint .beta.,.beta.-
dimethyl-
P-05-0303 02/08/05 05/08/05 CBI (G) Resin for (G) Alkanoic acid, 3-
coatings hydroxy-2-
(hydroxyalkyl)-2-
alkyl-, ion(1-),
salts with bisphenol
a-bisphenol a-
epichlorohydrin
polymer 2-alkyl-1-
alkanol-1-[(2-
hydroxyalkyl)thio]-2-
alkanol-tdi reaction
products
P-05-0304 02/08/05 05/08/05 Mitsubishi Gas (S) Monomer for (S) 2,4,8,10-
Chemical America, production of tetraoxaspiro[5.5]un
Inc. polymers decane-3,9-
diethanol,
.beta.,.beta.,.beta.
',.beta.'-
tetramethyl-
P-05-0305 02/09/05 05/09/05 CBI (S) Isolated chemical (S) Tall-oil pitch,
intermediate sapond., sterol-low
precursor for the
manufacture of casrn
390748-76-2, tall-
oil pitch, sapond.,
neutralized, sterol-
low
P-05-0306 02/10/05 05/10/05 Custom Synthesis, LLC (S) Additive for (G) Mixed fatty acids
industrial and and diacids polymer
metalworking with polyol
lubricants
[[Page 12483]]
P-05-0307 02/10/05 05/10/05 Materia Inc. (S) Catalyst (S) Ruthenium, [1,3-
bis(2,4,6-
trimethylphenyl)-2-
imidazolidinylidene]
dichloro(phenylmethy
lene)
(tricyclohexylphosph
ine)-, (sp-5-41)-
P-05-0308 02/10/05 05/10/05 Meadwestvaco (S) Support resin for (S) 2-propenoic acid,
Corporation - printing inks polymer with
Specialty Chemicals ethenylbenzene and
Division (1-
methylethenyl)benzen
e, compound with 2-
aminoethanol
P-05-0309 02/11/05 05/11/05 Kuraray America, Inc. (S) Inkjet ink (S) 1,3-butanediol, 3-
methyl-
P-05-0310 02/14/05 05/14/05 CBI (S) Resin for rubber (G) Olefin modified
hydrocarbon resin
P-05-0311 02/14/05 05/14/05 CBI (S) Resin for rubber (G) Olefin modified
hydrocarbon resin
P-05-0312 02/14/05 05/14/05 CBI (S) Resin for rubber (G) Olefin modified
hydrocarbon resin
P-05-0313 02/14/05 05/14/05 CBI (S) Resin for rubber (G) Olefin modified
hydrocarbon resin
P-05-0314 02/14/05 05/14/05 CBI (S) Resin for rubber (G) Olefin modified
hydrocarbon resin
P-05-0315 02/14/05 05/14/05 CBI (S) Resin for rubber (G) Olefin modified
hydrocarbon resin
P-05-0316 02/11/05 05/11/05 CBI (G) Additive, open, (S) Siloxanes and
non-dispersive use silicones, di-
methyl, 3-
hydroxypropyl me, me
octyl, ethoxylated
P-05-0317 02/14/05 05/14/05 CBI (G) Scale inhibitor (G) Mono-methyl
for subterranean maleate/acrylic acid/
oilfield brines such hydroxypropyl
as calcium carbonate methacrylate
and barium sulphate. copolymer ammonium
salt
P-05-0318 02/14/05 05/14/05 CBI (G) Scale inhibitor (G) Mono-methyl
for subterranean maleate/acrylic acid/
oilfield brines such hydroxypropyl
as calcium carbonate methacrylate sodium
and barium sulphate. salt
P-05-0319 02/14/05 05/14/05 CBI (G) Scale inhibitor (G) Mono-methyl
for subterranean maleate/acrylic acid/
oilfield brines such hydroxypropyl
as calcium carbonate methacrylate/sodium
and barium sulphate. p-
sulphophenylmethally
l ether copolymer
ammonium salt
P-05-0320 02/14/05 05/14/05 CBI (G) Scale inhibitor (G) Mono-methyl
for subterranean maleate/acrylic acid/
oilfield brines such hydroxypropyl
as calcium carbonate methacrylate/2-
and barium sulphate. propenoic acid,2-
methyl-
2(phosphonooxy)ethyl
ester/2-propenoic
acid, 2-methyl-
phosphinicobis(oxy-
2,1-ethanediyl ester
copolymer ammonium
salt
P-05-0321 02/14/05 05/14/05 CBI (G) Scale inhibitor (G) Mono-methyl
for subterranean maleate/acrylic acid/
oilfield brines such hydroxypropyl
as calcium carbonate methacrylate
and barium sulphate. copolymer
P-05-0322 02/14/05 05/14/05 CBI (G) The polymer will (G) Polyoxyethyene
be used as an tristyrylphenyl
additive in ether methacrylate/
detergent methacrylic acid
formulations. copolymer
P-05-0323 02/15/05 05/15/05 Incorez Corporation (S) 2 part protective (S) Propanoic acid, 3-
coating hydroxy-2-
(hydroxymethyl)-2-
methyl-, polymer
with 2-[(3-
aminopropyl)amino]et
hanol, dimethyl
carbonate, 1,6-
hexanediol, 1,1'-
methylenebis[4-
isocyanatocyclohexan
e] and 2-oxepanone,
compound with n,n-
diethylethanamine
P-05-0324 02/15/05 05/15/05 CBI (G) Paint component (G) Rare earth salt
of a carboxylic acid
P-05-0325 02/16/05 05/16/05 E.I. Du pont De (S) Extruded film; (G) Thermoplastic
Nemours and Company, powder coatings; polyimide
Inc. composite tapes and
prepregs; molded
parts; molded shapes
for machining
P-05-0326 02/16/05 05/16/05 Bio Based Chemical, (S) As a polyol in (S) Soybean oil,
LLC elastomer reaction products
formulations; as a with ethaneperoxoic
polyol in flexible acid
slab block and
molding
formulations; as a
polyol in rigid foam
formulations; as a
polyol in coatings
formulations; as a
polyol in binder
formulations; as
polyol in adhesive
formulations; as a
polyol in sealant
formulations
P-05-0327 02/17/05 05/17/05 CBI (G) Pigment (G) Amine salt of
dispersion polymer styrene acrylic
polymer
P-05-0328 02/17/05 05/17/05 International (S) Intermediate in (S) 3-
Specialty Products the production of methacryloylaminopro
styleze w-20 / pyl-lauryl- dimethyl-
styleze w-10 ammonium chloride
[[Page 12484]]
P-05-0329 02/18/05 05/18/05 Clariant LSM (S) Fungicide (G) Halogenated
(America) Inc. intermediate phenoxy aromatic
P-05-0330 02/17/05 05/17/05 CBI (S) Coating for the (G) Carboxylic acid
leather industry and ketone-
functional
polyurethane
polymer, 2-
dimethylaminoethyl
salt
P-05-0331 02/17/05 05/17/05 International (S) Thickening of (S) 1-dodecanaminium,
Specialty Products strong acids n,n-dimethyl-n-[3-
(oilfield drilling, [(2-methyl-1-oxo-2-
toilet bowl propenyl)amino]propy
cleaners, automatic l]-, chloride,
dishwashing liquids) polymer with n-[3-
(dimethylamino)propy
l]-2-methyl-2-
propenamide and 1-
ethenyl-2-
pyrrolidinone
P-05-0332 02/18/05 05/18/05 CBI (S) Screen inks; (G) Acrylic oligomer
flexo inks; plastic
coatings;
electronics
P-05-0333 02/18/05 05/18/05 CBI (S) Adhesives; (G) Urethane acrylate
coatings
P-05-0334 02/18/05 05/18/05 SPI Pharma, Inc. (S) Destructive use (S) Aluminum
as a processing aid hydroxycarbonate
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 2 Test Marketing Exemption Notices Received From: 01/20/05 to 02/18/05
T-05-0001 02/07/05 03/23/05 PPG Industries, Inc. (G) Component of an (G) Alkanediocic
automotive refinish acid, polymer with
direct-gloss topcoat 1,3,5-
tris(substituted
alkyl)-1,3,5-
triazine-
2,4,6(1h,3h,5h)-
trione, alkanoate
(ester) 3-
substituted-2-
(substituted alkyl)-
2-alkanoate (ester)
T-05-0002 02/18/05 04/03/05 Forbo Adhesives, LLC (G) Liquid (G) Isocyanate
polyurethane functional urethane
adhesive polymer
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 30 Notices of Commencement From: 01/20/05 to 02/18/05
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-02-0161 02/16/05 01/06/05 (G) Copolymer
P-02-0238 01/25/05 12/19/04 (S) Pentadecane, branched
P-02-0239 01/25/05 12/19/04 (S) Hexadecane, branched
P-03-0272 02/01/05 12/29/04 (G) Olefins
P-03-0342 01/26/05 01/11/05 (G) Funtional alcohol,
polymer with tdi, 2-
hydroxymethyl acrylate-
blocked
P-03-0358 01/26/05 12/20/04 (S) 1-chloro-4-propoxy
thioxanthone
P-03-0471 02/15/05 01/24/05 (G) Bis oxetanyl ether
P-04-0091 02/08/05 01/10/05 (S) Carbamodithioic acid,
dipentyl-, compound with
n-pentyl-1-pentanamine
(1:1)
P-04-0276 02/03/05 01/19/05 (G) Isobutene-maleic
anhydride copolymer
sodium salt
P-04-0346 02/02/05 01/21/05 (G) Copolymer of phenol
and aromatic hydrocarbon
P-04-0347 02/02/05 01/21/05 (G) Copolymer of phenol
and aromatic hydrocarbon
P-04-0491 02/15/05 01/27/05 (G) 1,3-
isobenzofurandione,
polymer with 2,5-
furandione,
oxybis[propanol] and 1,2-
propanediol, 1 (or 2)-(2-
methoxymethylethoxy)-
alkyl ester
P-04-0530 02/14/05 01/13/05 (G) Chloromethylketone
P-04-0760 01/27/05 01/20/05 (G) Acrylic polymer
P-04-0787 02/11/05 01/31/05 (G) Polyether carboxylate
P-04-0791 02/11/05 01/31/05 (G) Polyether phosphonate
P-04-0795 01/21/05 12/16/04 (G) Isocyanate terminated
urethane polymer
P-04-0816 02/03/05 01/28/05 (G) Disubstituted furanone
P-04-0836 02/10/05 02/01/05 (G) Substituted
naphthalenesulfonic acid
substituted azo phenyl
amino triazin amino
substituted phenyl
compound
P-04-0880 02/11/05 01/26/05 (G) Carbomonocyclic
carboxylic salt
P-04-0885 02/11/05 01/24/05 (G) Poly ester polyol
P-04-0933 01/28/05 01/09/05 (S) Silane,
ethenyltriethoxy-,
reaction products with
wollastonite (ca(sio3))
[[Page 12485]]
P-04-0936 01/28/05 01/19/05 (S) Silane, (3-
chloropropyl)trimethoxy-,
reaction products with
wollastonite (ca(sio3))
P-04-0937 02/02/05 01/06/05 (G) Silsesquioxanes
P-04-0940 02/09/05 01/25/05 (G) Alkyl amine nitrile
P-04-0948 01/28/05 01/01/05 (G) Siloxane coating
P-05-0013 02/07/05 01/08/05 (S) Ethane, 1-ethoxy-2-(2-
methoxyethoxy)-
P-05-0036 02/11/05 02/07/05 (G) Alkyl methacrylate
copolymer
P-05-0047 02/17/05 02/11/05 (G) Stabilized aluminum
alcoholate
P-96-1590 02/16/05 04/14/03 (G) Polysiloxane epoxy
acrylate copolymer
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: March 8, 2005.
Pamela M. Moseley,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 05-4955 Filed 3-11-05; 8:45 am]
BILLING CODE 6560-50-S