[Federal Register: April 8, 2005 (Volume 70, Number 67)]
[Notices]
[Page 18013-18021]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr08ap05-59]
[[Page 18013]]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2005-0020; FRL-7708-8]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from February 21, 2005 to March 15, 2005, consists of the PMNs
and TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the docket ID number OPPT-2004-0020 and
the specific PMN number or TME number, must be received on or before
May 9, 2005.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory
Coordinator, Environmental Assistance Division, Office of Pollution
Prevention and Toxics (7408M), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. How Can I Get Copies of this Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket identification (ID) number OPPT-2004-0020. The
official public docket consists of the documents specifically
referenced in this action, any public comments received, and other
information related to this action. Although a part of the official
docket, the public docket does not include Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute. The official public docket is the collection of materials
that is available for public viewing at the EPA Docket Center, Rm.
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington,
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The EPA Docket Center Reading
Room telephone number is (202) 566-1744 and the telephone number for
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide a reference to that
material in the version of the comment that is placed in EPA's
electronic public docket. The entire printed comment, including the
copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the photograph
will be placed in EPA's electronic public docket along with a brief
description written by the docket staff.
C. How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number and specific PMN number or TME number in
the subject line on the first page of your comment. Please ensure that
your comments are submitted within the specified comment period.
Comments received after the close of the comment period will be marked
``late.'' EPA is not required to consider these late comments. If you
wish to submit CBI or information that is otherwise protected by
statute, please
[[Page 18014]]
follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail
to submit CBI or information protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/
, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPPT-2004-0020. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov,
Attention: Docket ID Number OPPT-2004-0020 and PMN Number or TME
Number. In contrast to EPA's electronic public docket, EPA's e-mail
system is not an ``anonymous access'' system. If you send an e-mail
comment directly to the docket without going through EPA's electronic
public docket, EPA's e-mail system automatically captures your e-mail
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the
official public docket, and made available in EPA's electronic public
docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Document Control Office (7407M),
Office of Pollution Prevention and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
3. By hand delivery or courier. Deliver your comments to: OPPT
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number
OPPT-20040020 and PMN Number or TME Number. The DCO is open from 8 a.m.
to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930.
D. How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the technical person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the notice or collection
activity.
7. Make sure to submit your comments by the deadline in this
document.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action and the specific PMN number you are
commenting on in the subject line on the first page of your response.
You may also provide the name, date, and Federal Register citation.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from February 21, 2005 to March 15,
2005, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
[[Page 18015]]
I. 96 Premanufacture Notices Received From: 02/21/05 to 03/15/05
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-05-0335 02/22/05 05/22/05 International (S) Component in (S) 2-propenoic acid,
Specialty Products membranes to enhance 2-metyhl-, dodecyl
hydrophilicity/ ester, polymer with
hydration flux; 1-ethenyl-2-
component in pyrrolidinone and 2-
coatings to enhance propenoic acid
adhesion of coating
to the substrate;
component in
adhesives to enhance
adhesive coatings on
synthetic
substrates;
component in
cleaners used as a
thickener
P-05-0336 02/22/05 05/22/05 CBI (S) Use as a (G) Isoxadifen-ethyl
herbicide safener in
formulated pesticide
products
P-05-0337 02/22/05 05/22/05 CBI (G) Polymer is (G)
applied as a Diphenylcaprylmethic
functional coating one
over inorganic
solids.
P-05-0338 02/23/05 05/23/05 Tremco Inc. (G) Water-proofing (G) Alkylene ether
sealant additive amine, blocked
P-05-0339 02/23/05 05/23/05 Falcon Lab LLP (S) Adjuvant for (S) Nonanoic acid,
pesticides ammonium salt
P-05-0340 02/24/05 05/24/05 Eftec North America, (G) Automobile (G) Blocked
L.L.C. coating polyurethane
P-05-0341 02/24/05 05/24/05 Eftec North America, (G) Automobile (G) Blocked
L.L.C. coating polyurethane
P-05-0342 02/24/05 05/24/05 CBI (G) Coating and ink (G) Glycerides, alkyl
ingredient mono, di- and tri-,
alkoxylated
P-05-0343 02/24/05 05/24/05 CBI (G) Surface coating (G) Siloxanes and
resin silicones, di-
methyl, alkoxy aryl,
polymers with aryl
silsesquioxanes,
alkoxy-terminated,
polymers with
epichlorohydrin and
4,4'-(1-alkylidene)
bis [cycloalkanol]
P-05-0344 02/25/05 05/25/05 E.I. Du Pont De (G) Intermediate (G) Polyether glycol
Nemours and Company
Inc.
P-05-0345 02/25/05 05/25/05 E.I. Du Pont De (G) Intermediate (G) Copolyether
Nemours and Company glycol
Inc.
P-05-0346 02/24/05 05/24/05 CBI (G) An open non- (G) Polyester resin
dispersive use
P-05-0347 02/25/05 05/25/05 Ashland Inc., (G) The material (G)
Environmental Health performs as a Poly[oxy(alkyldiyl),
and Safety flexibilizer for .alpha.-hydro-
epoxy vinyl ester .omega.-hydroxy-,
resins acrylated-blocked
polymer with 1,1'-
methylenebis[isocyan
atobenzene],
P-05-0348 02/24/05 05/24/05 CBI (G) Fluid retention (G)
polymer Dialkyldiallylsodium
halide with
unsaturated
phosphonic acid,
acrylamido alkyl
propane sulfonic
acid sodium salt,
and two substituted
monomers.
P-05-0349 02/24/05 05/24/05 CBI (G) Fluid retention (G)
polymer Dialkyldiallylsodium
halide with
unsaturated
phosphonic acid,
acrylamido alkyl
propane sulfonic
acid sodium salt,
and two substituted
monomers.
P-05-0350 02/25/05 05/25/05 CBI (S) Toner binder (G) Polyester resin
P-05-0355 02/28/05 05/28/05 Ashland Inc., (G) Two-component (G) Poly(oxy-1,2-
Enviornmental Health laminating adhesive ethanediyl), .alpha.-
and Safety designed to exhibit hydro-.omega.-
improved adhesion to hydroxy-, polymer
metal surfaces and with alkyl
improved resistance diisocyanate
to heat exposure.
P-05-0356 03/01/05 05/29/05 KAO Specialties (S) Emulsifier in (S) Amides, canola-
Americas LLC metalworking fluids; oil, n-
thickener and foam (hydroxyethyl),
booster in ethoxylated
dishwashing agent
and car shampoo
P-05-0357 02/28/05 05/28/05 Eastman Kodak Company (G) Chemical (S) Pentadecane, 7-
intermediate, (bromomethyl)-
destructive use
P-05-0358 02/28/05 05/28/05 3M (G) Textile treatment (G) Polycarbodiimide
additive.
P-05-0359 03/02/05 05/30/05 CBI (G) Crosslinker (G) Isocyanate acid,
polyalkylenepolyphen
yylene ester, 2-(2-
alkoxy)alkanol-and
alkylene glycol-
blocked
P-05-0360 03/02/05 05/30/05 CBI (G) Printing ink (G) 7h-pyrazolo [1,5-
b] [1,2,4] triazole
derivative
P-05-0361 03/02/05 05/30/05 CBI (G) Chemical additive (G) Siloxanes and
silicones, di-
methyl, 3-(2-
hydroxyalkoxy)-1-[(2-
hydroxyalkoxy)alkyl]-
1-alkenyl methyl
P-05-0362 03/02/05 05/30/05 CMP Coatings, Inc. (S) Paint additive (G) Reaction products
with dimethyl
octatriene
[[Page 18016]]
P-05-0363 03/03/05 05/31/05 CBI (G) Open non- (G) Aliphatic,
dispersive (coatings blocked
additive) polyisocyanate
P-05-0364 03/03/05 05/31/05 IGM Resins Inc (S) Cationic ultra (S) 9h-
violet-initiator for thioxanthenium, 10-
production of ultra [1,1'-biphenyl]-4-yl-
violet-curable dvd- 2-(1-methylethyl)-9-
adhesives; cationic oxo-,
utlra violet- hexafluorophosphate(
initiator for 1-)
production of ultra
violet-curable can
coatings; cationic
ultra violet-
initiator for
production of ultra
violet-curable
flexographic ink
P-05-0365 03/04/05 06/01/05 CBI (G) Paint primer for (G) Substituted
metal substrates; aliphatic amine
corrosion inhibitor
for metal substrates
P-05-0366 03/04/05 06/01/05 Eastman Kodak Company (G) Chemical (G) Substituted
intermediate, phenylsulfonyl,
destructive use substituted acid
chloride
P-05-0367 03/04/05 06/01/05 CBI (G) Coating component (G) Mixed metal oxide
complex
P-05-0368 03/04/05 06/01/05 CBI (G) Resin coating (G) Alkanoic acid, 2-
hydroxy-, ion(1-),
salt with bisphenol
a-bisphenola-
epichlorohydrin
polymer alkanoate-2-
(dialkylamino)alkano
l-2-alkyl-1-alkanol-
toluene diisocyanate
reaction products
P-05-0369 03/04/05 06/01/05 CBI (G) Automotive (G) Acrylic polymer
coatings
P-05-0370 03/04/05 06/01/05 CBI (G) Automotive (G) Acrylic polymer
coatings
P-05-0371 03/04/05 06/01/05 CBI (G) Automotive (G) Acrylic polymer
coatings
P-05-0372 03/04/05 06/01/05 CBI (G) Automotive (G) Acrylic polymer
coatings
P-05-0373 03/04/05 06/01/05 CBI (G) Automotive (G) Acrylic polymer
coatings
P-05-0374 03/04/05 06/01/05 CBI (G) Automotive (G) Acrylic polymer
coatings
P-05-0375 03/04/05 06/01/05 CBI (G) Pigment (G) Sma ester
dispersant potassium salt
P-05-0376 03/04/05 06/01/05 CBI (G) Pigment (G) Sma ester sodium
dispersant salt
P-05-0377 03/04/05 06/01/05 Henkel Consumer (S) Adhesive and (G) Silane terminated
Adhesives Inc. sealant polyurethane
P-05-0378 03/07/05 06/04/05 Ashland Inc., (G) Acrylic component (G) B-keto ester,
Enviornmental Health of industrial polymer with 2-ethyl-
and Safety coatings and 2-[[(1-oxo-2-
adhesive propenyl)oxy]methyl]-
applications 1,3-propanediyl di-2-
propenoate and 2-
hydroxyethyl 2-
propenoate, polymer
with krasol lbd 2000
P-05-0379 03/07/05 06/04/05 Forbo Adhesives, LLC (G) Hot melt adhesive (G) Isocyanate
functional polyester
urethane polymer
P-05-0380 03/07/05 06/04/05 Ashland Inc., (G) Roofing adhesive (G) Benzene, 1,1'-
Enviornmental Health for bonding roof methylenebis[4-
and Safety membranes (such as isocyanato-, polymer
pvc, tpo) to with
substrates (such as benzenedicarboxylic
insulation boards or acid, butyl dialkyl
concrete surfaces) ester,
poly[oxy(methyl-1,2-
ethanediyl)],
.alpha.-hydro--
hydroxy-, oxirane,
alkyll-, polymer
with oxirane, ether
with propanepolyol
and sartomer's hlbh
p-3000 and lexorez
1180
P-05-0381 03/04/05 06/01/05 Ge Betz (G) Component in a (G) Phosphonated
non-chrome treatment polyamine
for metals.
P-05-0382 03/04/05 06/01/05 Ge Betz (G) Component in a (G) Phosphonated
non-chrome treatment polyamine
for metals.
P-05-0383 03/04/05 06/01/05 Ge Betz (G) Component in a (G) Phosphonated
non-chrome treatment polyamine
for metals.
P-05-0384 03/04/05 06/01/05 Ge Betz (G) intermediate (G) Polyamine
phosphate salt
P-05-0385 03/04/05 06/01/05 Ge Betz (G) intermediate (G) Polyamine
hydrochloride salt
P-05-0386 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Enviornmental Health coating, ink polymers with
and Safety bisphenol a
diglycidyl ether
homopolymer
diacrylate 3-(C10 16-
alkyloxy)-2-
hydroxypropyl ethers
and alkyl
diacrylate, reaction
products with
monoalkyl acrylate
P-05-0387 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Enviornmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-
methylethylidene)bis
[phenol] 2-
propenoate and alkyl
diacrylate, reaction
products with
monoalkyl acrylate a
and monoalkyl
acrylate b
[[Page 18017]]
P-05-0388 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Enviornmental Health coating, ink polymer with cn 115,
and Safety 2-propenoic acid,
oxybis(methyl-2,1-
ethanediyl) ester
and cyclic alkyl
monoacrylate
P-05-0389 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Enviornmental Health coating, ink polymers with
and Safety bisphenol a
diglycidyl ether
homopolymer
diacrylate 3-(C10 16-
alkyloxy)-2-
hydroxypropyl ethers
and alkyl
diacrylate, reaction
products with
monoalkyl acrylate
P-05-0390 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Enviornmental Health coating, ink polymer with
and Safety (chloromethyl)oxiran
e polymer with 4,4'-
(1-methylethylidene)
bis[phenol]2-
propenoate and alkyl
diacrylate, reaction
products with
monoalkyl acrylate a
and monoalkyl
acrylate b
P-05-0391 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester,
Enviornmental Health coating, ink polymers with cn
and Safety 115, 2-propenoic
acid, oxybis(methyl-
2,1-ethanediyl)
ester and cyclic
alkyl monoacrylate
P-05-0392 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-
Enviornmental Health coating, ink, over- ketoesters, polymers
and Safety print varnish with bisphenol a
diglycidyl ether
homopolymer
diacrylate 3-
(C10 16)-alkyloxy)-2-
hydroxypropyl
ethers, 1,6-
hexanediol
diacrylate,
polyethylene glycol
monoacrylate ether
with
trimethylolpropane
(3:1), and amine
acrylate, reaction
products with alkyl
amine and alkanol
amine
P-05-0393 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-
Enviornmental Health coating, ink, over- ketoesters, polymers
and Safety print varnish with bisphenol a
diglycidyl ether
homopolymer
diacrylate 3-
(C10 16)-alkyloxy)-2-
hydroxypropyl
ethers, 1,6-
hexanediol
diacrylate,
polyethylene glycol
monoacrylate ether
with
trimethylolpropane
(3:1), and alkyl
acrylate, reaction
products with alkyl
amine and alkanol
amine
P-05-0394 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-
Enviornmental Health coating, ink, over- ketoesters, polymers
and Safety print varnish with aromatic epoxy
acrylate, 1,6-
hexanediol
diacrylate,
polyethylene glycol
monoacrylate ether
with
trimethylolpropane
(3:1), and amine
acrylate, reaction
products with alkyl
amine and alkanol
amine
P-05-0395 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-
Enviornmental Health coating, ink, over- ketoesters, polymers
and Safety print varnish with aromatic epoxy
acrylate, 1,6-
hexanediol
diacrylate,
polyethylene glycol
monoacrylate ether
with
trimethylolpropane
(3:1), and alkyl
acrylate, reaction
products with alkyl
amine and alkanol
amine
P-05-0396 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester
Enviornmental Health coating, ink, over- and .beta.-diketone,
and Safety print varnish polymers with
bisphenol a
diglycidyl ether
homopolymer
diacrylate 3-
(C10 16)-alkyloxy)-2-
hydroxypropyl
ethers, 1,6-
hexanediol
diacrylate,
polyethylene glycol
monoacrylate ether
with
trimethylolpropane
(3:1), and amine
acrylate, reaction
products with alkyl
amine and alkanol
amine
[[Page 18018]]
P-05-0397 03/07/05 06/04/05 Ashland Inc., (G) Adhesive, (G) .beta.-ketoester
Enviornmental Health coating, ink, over- and .beta.-diketone,
and Safety print varnish polymers with
bisphenol a
diglycidyl ether
homopolymer
diacrylate 3-
(C10 16)-alkyloxy)-2-
hydroxypropyl
ethers, 1,6-
hexanediol
diacrylate,
polyethylene glycol
monoacrylate ether
with
trimethylolpropane
(3:1), and alkyl
acrylate, reaction
products with alkyl
amine and alkanol
amine
P-05-0398 03/08/05 06/05/05 Kemira Chemicals, (G) Dispersive use (G) Fatty acids,
Inc. (e.g., paper C16 18 and C18-
manufacturing) unsaturated reaction
products with
triethanolamine,
dimethyl sulfate-
quaternized
P-05-0399 03/08/05 06/05/05 Kemira Chemicals, (G) Dispersive use (G) Fatty acids,
Inc. (e.g., paper C16 18 and C18-
manufacturing) unsataurated
reaction products
with
triethanolamine,
methyl chloride-
quaternized
P-05-0400 03/08/05 06/05/05 Firmenich Inc. (S) Aroma chemical (S) 1-butanone, 3-
for use in fragrance (dodecylthio)-1-
mixtures, that in (2,6,6-trimethyl-3-
turn are used in cyclohexen-1-yl)-
perfumes, soaps,
cleaners, etc.
P-05-0401 03/09/05 06/06/05 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive acrylic polyether
urethane polymer
P-05-0402 03/08/05 06/05/05 CBI (G) Paper additive (G) Arene,alkenyl-,
homopolymer,
hydroxyaromatic
carboxylic acid-
terminated, metal
complexes
P-05-0403 03/08/05 06/05/05 CBI (G) Paper additive (G) Alkylaldehyde,
polymer with
alkylarenol,
hydroxyaromatic
carboxylic acid-
terminated, metal
complexes
P-05-0404 03/09/05 06/06/05 CBI (G) Open non- (G) Polymer modified
dispersive use rosin.
P-05-0405 03/10/05 06/07/05 Eastman Kodak Company (G) Contained use in (G) Substituted
an article phenylsulfonyl,
halosubstituted
benzamide
P-05-0406 03/10/05 06/07/05 Eastman Kodak Company (G) Chemical (G) Substituted
intermediate, naphthalenedisulfoni
destructive use c acid
P-05-0407 03/10/05 06/07/05 CBI (G) Polyester resin (G) Poyester
P-05-0408 03/10/05 06/07/05 CBI (G) Polyester resin (G) Poyester
P-05-0409 03/10/05 06/07/05 CBI (G) Polyester resin (G) Poyester
P-05-0410 03/10/05 06/07/05 CBI (G) Polyester resin (G) Poyester
P-05-0411 03/11/05 06/08/05 CBI (G) Coating resin (G) Phenol, 4,4'-(1-
alkylalkylidene)bis-
, reaction products
with bisphenol a-
epichlorohydrin
polymer alkanoate,
dialkylenetriamine,
2-
(alkylamino)alkanol,
1,1'-alkylenebis[4-
isocyanatobenzene]
and polyalkylene
glycol ether with
bisphenol a (2:1)
P-05-0412 03/11/05 06/08/05 IGM Resins Inc (S) Free radical - (S) Poly(oxy-1,4-
initiator for butanediyl), .alpha.-
production of ultra [[(9-oxo-9h-
violet-curable thioxanthenyl)oxy]ac
offset inks; free etyl]-.omega.-[[[(9-
radical - initiator oxo-9h-
for production of thioxanthenyl)oxy]ac
ultra violet-curable etyl]oxy]-
wood coatings; free
radical -initiator
for production of
ultra violet curable
flexographic ink
P-05-0413 03/11/05 06/08/05 IGM Resins Inc (S) Free radical - (S) Poly(oxy-1,4-
initiator for butanediyl),.alpha.-
production of ultra [(4-
violet-curable benzoylphenoxy)acety
offset inks; free l]-.omega.-[[(4-
radical - initiator benzoylphenoxy)acety
for production of l]oxy]-
ultra violet-curable
wood coatings; free
radical -initiator
for production of
ultra violet curable
flexographic ink
P-05-0414 03/14/05 06/11/05 International (S) Intermediate in (S) 1-dodecanaminium,
Specialty Products the production of n,n-dimethyl-n-[3-
styleze w-20 / [(2-methyl-1-oxo-2-
styleze w-10 propenyl)amino]propy
l]-, chloride
P-05-0415 03/11/05 06/08/05 CBI (G) Automotive (G) Acrylic polymer
coatings
P-05-0416 03/11/05 06/08/05 CBI (G) Automotive (G) Acrylic polymer
coatings
[[Page 18019]]
P-05-0417 03/14/05 06/11/05 Cytec Industries Inc. (G) crosslinking (G) Tris-alkyl-alkoxy
resin melamine polymer
P-05-0418 03/15/05 06/12/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6'6''-(1,3,5-
metalworking fluids triazin-2,4,6-
triyltriimino) tris-
, compound with 2-
aminoethanol
P-05-0419 03/15/05 06/12/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6'6''-(1,3,5-
metalworking fluids triazin-2,4,6-
triyltriimino)tris-,
compound with 2-
amino-2-methyl-1-
propanol
P-05-0420 03/15/05 06/12/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6'6''-(1,3,5-
metalworking fluids triazin-2,4,6-
triyltriimino)tris-,
compound with 1-
amino-2-propanol
P-05-0421 03/15/05 06/12/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6'6''-(1,3,5-
metalworking fluids triazin-2,4,6-
triyltriimino)tris-,
compound with
1,1',1'' -
nitrilotris [2-
propanol]
P-05-0422 03/15/05 06/12/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6'6''-(1,3,5-
metalworking fluids triazin-2,4,6-
triyltriimino)tris-,
compound with 1,1'-
iminobis[2-propanol]
P-05-0423 03/15/05 06/12/05 Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid,
Additives additive for 6,6',6''-(1,3,5-
metalworking fluids triazine-2,4,6-
triyltriimino)tris-,
compound with 2-(2-
aminoethoxy) ethanol
P-05-0424 03/15/05 06/12/05 Eftec North America, (G) Automobile (G) Nh2-terminated
L.L.C. coating polyurethane
prepolymer
P-05-0425 03/15/05 06/12/05 Cytec Surface (S) Binder for paints (G) 2-propenoic acid,
Specialties Inc. and coatings 2-methyl-, 2-
hydroxyalkyl ester,
polymer with butyl 2-
propenoate,
ethenylbenzene, 4-
hydroxybutyl 2-
propenoate, 2-
methylpropyl 2-
methyl-2-propenoate,
and 2-oxepanone and
2-propenoic acid,
tert-bu 2-
ethylhexaneperoxoate-
initiated, compounds
with 2-
(dimethylamino)ethan
ol
P-05-0426 03/15/05 06/12/05 Cytec Surface (S) Binder for paints (G) 2-propenoic acid,
Specialties Inc. coatings 2-methyl-, alkyl
ester, polymer with
butyl 2-propenoate,
ethenylbenzene, and
2-propenoic acid,
tert-bu 2-
ethylhexaneperoxoate-
initiated, compounds
with 2-
(dimethylamino)ethan
ol
P-05-0427 03/15/05 06/12/05 CBI (G) Chemical (G) Polyketone
intermediate oligomer
P-05-0428 03/15/05 06/12/05 Cytec Surface (S) Binder for paints (G) 1,3-
Specialties Inc. and coatings benzenedicarboxylic
acid, polymer with
1,3-
diisocyanatomethylbe
nzene, 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol,
hexanedioic acid,
1,6-hexanediol, 3-
hydroxy-2-
(hydroxymethyl)-2-
methylpropanoic
acid, 5-isocyanato-1-
(isocyanatomethy l)-
1,3,3-
trimethylcyclohexane
, and
(alkylidene)bis[cycl
ohexanol], 3-
oxobutanoate,
compound with n,n-
diethylethanamine
P-05-0429 03/15/05 06/12/05 Cytec Surface (S) Resin for (G) Modified fatty
Specialties Inc. industrial paints acids, polymer with
1,6-hexanediol,
isophthalic acid,
and trimellitic
anhydride
P-05-0430 03/15/05 06/12/05 CBI (G) Stabilizing (G) Substituted
additive for benzotriazole
polymers
P-05-0431 03/15/05 06/12/05 CBI (G) Lubricant (G) 2,5-furandione,
additive polymer with ethane
and 1-propene,
reaction product
with aryl amine
[[Page 18020]]
P-05-0432 03/15/05 06/12/05 DIC International (G) Adhesives (G) Alkanedioic acid,
(USA), Inc. polymer with amine,
alkanediols,
caprolactone,
dialkyl ester of
sulfated aromatic
dicarboxylic acid,
sodium salt, hydroxy
substituted alkane,
isocyanates and
alkanetriol.
P-05-0437 03/15/05 06/12/05 Cytec Surface (S) Binder for paints (G) 2-propenoic acid,
Specialties Inc. and coatings 2-methyl-, 2-
hydroxyethyl ester,
polymer with butyl 2-
propenoate,
ethenylbenzene, 4-
hydroxybutyl 2-
propenoate 2-
methylpropyl 2-
methyl-2-propenoate,
and 2-oxepanone,
tert-bu 2-
ethylhexaneperoxoate-
initiated
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 1 Test Marketing Exemption Notices Received From: 02/21/05 to 03/16/05
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-05-0003 03/14/05 04/27/05 CBI (G) Polyurethane's (G) Soy polyol
market
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 49 Notices of Commencement From: 02/21/05 to 03/15/05
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-00-0536 03/09/05 02/21/05 (G) Reaction product of:
polyoxyalkylene solution
with trimethylolpropane,
1,4, cyclohexane
dimethanol, cyclic
aliphatic anhydrides,
trimellitic anhydride and
block copolymers of
ethylene oxide +
propylene oxide
P-00-0537 03/09/05 02/28/05 (G) Reaction product:
polyoxyalkylene solution
with trimethylolpropane,
1,4 cyclohexane
dimethanol, cyclic
aliphatic anhydrides and
trimellitic anhydride
P-03-0698 03/03/05 02/15/05 (G) Rosin, polymer with a
monocarboxylic acid,
alkylphenols,
formaldehyde, maleic
anhydride and
pentaerythritol.
P-03-0715 03/08/05 03/01/05 (G) Dialkyl dimethyl
ammonium carbonate (1:1)
P-03-0716 03/08/05 03/01/05 (G) Dialkyl dimethyl
ammonium carbonate (2:1)
P-03-0849 03/03/05 02/22/05 (G) Aqueous polyurethane
dispersion
P-03-0866 03/14/05 02/16/05 (S) Siloxanes and
silicones, di-methyl,
polymers with 3-[(2-
aminoethyl)amino]propyl
ph silsesquioxanes,
methoxy-terminated
P-04-0421 03/04/05 02/17/05 (G) Polyester
polycarbamate
P-04-0436 03/10/05 03/01/05 (G) Urethane acrylate
P-04-0462 03/09/05 02/14/05 (G) Polyurethane
prepolymer
P-04-0475 03/09/05 02/02/05 (G) Alkyl methacrylate
copolymer
P-04-0495 02/23/05 09/27/04 (G) Direct black azo dye
P-04-0498 02/23/05 09/27/04 (G) Direct black azo dye
P-04-0573 03/03/05 02/12/05 (G) Aliphatic
polyisocyanate
P-04-0584 02/25/05 01/20/05 (G) Maleic anhydride and
acrylics modified
polyolefin
P-04-0634 03/09/05 03/02/05 (G) Reaction product of:
isophorone diisocyanate,
aliphatic diamine,
.beta.hydro-.omega.-
hydroxypoly (oxy-1,4-
butanediyl) and aliphatic
hydroxy functional
polyols.
P-04-0675 03/01/05 02/10/05 (G) N,n,n-trialkyl-
alkylaminium, n-
aminocarbonylalkenyl,
chloride, polymer with n-
sulfoalkyl-
aminocarbonylalkenyl,
sodium salt and
aminocarbonylalkenyl
P-04-0676 03/01/05 02/10/05 (G) N,n,n-trialkyl-
alkylaminium, n-
aminocarbonylalkenyl,
chloride, polymer with n-
sulfoalkyl-
aminocarbonylalkenyl,
sodium salt and
aminocarbonylalkenyl
P-04-0692 02/28/05 02/10/05 (G) Trifunctional acrylic
ester
P-04-0693 03/15/05 02/10/05 (G) Urethane acrylate
oligomer
P-04-0715 02/24/05 02/08/05 (G) Acrylic copolymer
P-04-0745 02/23/05 01/28/05 (G) Organosilane ester
P-04-0746 02/23/05 01/28/05 (G) Amino phenolic
reaction product with
polyvinylphenol
[[Page 18021]]
P-04-0751 03/09/05 02/10/05 (G) Alkanedioic acid,
polymer with 2-ethyl-2-
(hydroxymethyl)-1,3-
propanediol, 1,3-
isobenzofurandione and 2-
methyl-1,3-propanediol, 2-
hydroxy-3-[(1-
oxoneodecyl)oxy]propyl
ester
P-04-0763 03/01/05 02/10/05 (G) Polycarboxylate
polymer with
alkenyloxyalkylol
modified
poly(oxyalkylenediyl),
calcium sodium salt
P-04-0764 03/01/05 02/10/05 (G) Polycarboxylate
polymer with
alkenyloxyalkylol
modified
poly(oxyalkylenediyl),
sodium salt
P-04-0797 02/22/05 01/28/05 (G) Poly acrylic
dispersion peroxide
initiated poly acrylic
esters with amine salt.
P-04-0802 02/23/05 02/08/05 (G) Isocyanate terminated
urethane polymer
P-04-0817 03/04/05 02/23/05 (G) Trimethyl acyclic
alkenones
P-04-0818 03/10/05 02/23/05 (G) Urethane acrylate
P-04-0832 02/23/05 02/11/05 (S) Bicyclo[2.2.1]heptan-2-
ol, 2-ethyl-1,3,3-
trimethyl-
P-04-0839 02/25/05 02/08/05 (G) Copolymer of acrylic
acid and maleic acid
P-04-0840 02/25/05 02/11/05 (G) Copolymer of maleic
acid and styrene
P-04-0841 02/25/05 02/14/05 (G) Copolymer of maleic
acid and styrene
P-04-0842 02/25/05 02/08/05 (G) Copolymer of maleic
acid and styrene
P-04-0843 02/25/05 02/11/05 (G) Copolymer of acrylic
acid and styrene
P-04-0872 02/23/05 01/25/05 (G) Aromatic polyester
polyurethane prepolymer
based on mdi
P-04-0877 03/15/05 03/04/05 (G) Substituted ppvs (poly-
p-phenylen-vinylens)
P-04-0879 02/23/05 01/24/05 (G) C11 17 hydrocarbons
P-04-0911 02/24/05 01/24/05 (G) Aryl-substituted
diether propane
P-04-0960 03/11/05 02/14/05 (G) Biphenyl-bis(azo-
acetoaceto-benzoate)
P-05-0040 03/04/05 01/24/05 (G) Modified starch-
acrylate polymer
P-05-0066 02/23/05 02/16/05 (G) Polyester polyurethane
P-05-0071 03/10/05 02/16/05 (G) Telechelic
polyacrylates
P-05-0077 02/23/05 02/18/05 (S) Siloxanes and
silicones, di-methyl, 3-
hydroxypropyl methyl,
ethers with polyethylene
glycol and polyethylene
glycol mono(2-
carboxyethyl) ether,
polymers with 1,1'-
methylenebis[4-
isocyanatocyclohexane]
P-05-0103 02/22/05 02/07/05 (G) Halo phenyl amino
substituted cyclohexene
salt
P-05-0111 02/25/05 02/22/05 (G) Toluylenediisocyanate,
reaction product with
benzenedimethanamine and
methoxypolyethylene
glycol
P-05-0113 02/25/05 02/22/05 (G) Polyethylene-
polypropylene glycol,
reaction product with
octadecylisocyanate
P-95-0482 03/15/05 02/23/05 (G) Condensation polyester
of glycols and diacids
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: March 30, 2005.
Vicki A. Simons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 05-6854 Filed 4-7-05; 8:45 am]
BILLING CODE 6560-50-S