[Federal Register: May 6, 2005 (Volume 70, Number 87)]
[Notices]
[Page 24020-24035]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr06my05-59]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[Docket ID No. OECA-2005-0016 to 0051 FRL-7908-6]
Agency Information Collection Activities: Request for Comments on
Thirty Six Proposed Information Collection Requests (ICRs)
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In compliance with the Paperwork Reduction Act (PRA) (44
U.S.C. 3501 et seq.), this document announces that EPA is planning to
submit the following 36 existing, approved, continuing Information
Collection Requests (ICR) to the Office of Management and Budget (OMB)
for the purpose of renewing the ICRs. Before submitting the ICRs to OMB
for
[[Page 24021]]
review and approval, EPA is soliciting comments on specific aspects of
the information collections as described under SUPPLEMENTARY
INFORMATION.
DATES: Comments must be submitted on or before July 5, 2005.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier service. Follow the detailed instructions
as provided under SUPPLEMENTARY INFORMATION, section I. B.
FOR FURTHER INFORMATION CONTACT: The contact individuals for each ICR
are listed under SUPPLEMENTARY INFORMATION, section II. C.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Background
Pursuant to section 3506(c)(2)(A) of the PRA, EPA is soliciting
comments and information to enable it to:
(1) Evaluate whether the proposed collections of information are
necessary for the proper performance of the functions of the Agency,
including whether the information will have practical utility.
(2) Evaluate the accuracy of the Agency's estimates of the burdens
of the proposed collections of information.
(3) Enhance the quality, utility, and clarity of the information to
be collected.
(4) Minimize the burden of the collections of information on those
who are to respond, including through the use of appropriate automated
or electronic collection technologies or other forms of information
technology, e.g., permitting electronic submission of responses.
Burden means the total time, effort, or financial resources
expended by persons to generate, maintain, retain, or disclose or
provide information to or for a Federal agency. This includes the time
needed to review instructions; develop, acquire, install, and utilize
technology and systems for the purposes of collecting, validating, and
verifying information, processing and maintaining information, and
disclosing and providing information; adjust the existing ways to
comply with any previously applicable instructions and requirements;
train personnel to be able to respond to a collection of information;
search data sources; complete and review the collection of information;
and transmit or otherwise disclose the information.
An agency may not conduct or sponsor, and a person is not required
to respond to, a collection of information unless it displays a
currently valid OMB control number. The OMB control numbers for EPA's
standards are displayed at 40 CFR part 9.
B. Public Dockets
EPA has established official public dockets for the ICRs listed
under SUPPLEMENTARY INFORMATION, section II. B. The official public
docket for each ICR consists of the documents specifically referenced
in the ICR, any public comments received, and other information related
to each ICR. The official public docket for each ICR is the collection
of materials that is available for public viewing at the Enforcement
and Compliance Docket and Information Center in the EPA Docket Center
(EPA/DC), EPA West, Room B102, 1301 Constitution Avenue, NW.,
Washington, DC. The EPA Docket Center Public Reading Room is open from
8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal
holidays. The telephone number for the Reading Room is (202) 566-1744,
and the telephone number for the Enforcement and Compliance Docket and
Information Center Docket is (202) 566-1514. An electronic version of
the public docket for each ICR is available through EPA Dockets
(EDOCKET) at: http://www.epa.gov/edocket. Use EDOCKET to obtain a copy
of the draft collection of information, to submit or to view public
comments, to access the index listing of the contents of the public
docket, and to access those documents in the public docket that are
available electronically. When in the system, select ``search,'' then
key in the docket ID number identified above.
Any comments related to the listed ICRs above should be submitted
to EPA within 60 days of this notice. EPA's policy is that public
comments, whether submitted electronically or in paper, will be made
available for public viewing in EDOCKET as EPA receives them and
without change, unless the comment contains copyrighted material,
Confidential Business Information (CBI), or other information whose
public disclosure is restricted by statute. When EPA identifies a
comment containing copyrighted material, EPA will provide a reference
to that material in the version of the comment that is placed in
EDOCKET. The entire printed comment, including the copyrighted
material, will be available in the public docket. Although identified
as an item in the official docket, information claimed as CBI, or whose
disclosure is otherwise restricted by statute, is not included in the
official public docket, and will not be available for public viewing in
EDOCKET. For further information about the electronic docket, see EPA's
Federal Register notice describing the electronic docket at 67 FR 38102
(May 31, 2002), or go to http://www.epa.gov./edocket.
II. ICRs To Be Renewed
A. For All ICRs
The listed ICRs address Clean Air Act information collection
requirements in standards (i.e., standards) which have mandatory
recordkeeping and reporting requirements. Records collected under the
New Source Performance Standards (NSPS) must be retained by the owner
or operator for at least two years and the records collected under the
National Emission Standards for Hazardous Air Pollutants (NESHAP) must
be retained by the owner or operator for at least five years. In
general, the required collections consist of emissions data and other
information deemed not to be private.
In the absence of such information collection requirements,
enforcement personnel would be unable to determine whether the
standards are being met on a continuous basis, as required by the Clean
Air Act.
The Agency computed the burden for each of the recordkeeping and
reporting requirements applicable to the industry for the currently
approved Information Collection Requests (ICRs) listed in this notice.
Where applicable, the Agency identified specific tasks and made
assumptions, while being consistent with the concept of the Paperwork
Reduction Act.
B. List of ICRs Planned To Be Submitted
In compliance with the Paperwork Reduction Act (44 U.S.C. 3501 et
seq.), this notice announces that EPA is planning to submit the
following 36 continuing Information Collection:
(1) NESHAP for Steel Pickling, HCl Process Facilities and
Hydrochloric Acid Regeneration Plants (40 CFR Part 63, Subpart CCC);
Docket ID Number OECA-2005-0047; EPA ICR Number 1821.05; OMB Control
Number 2060-0419; expiration date October 31, 2005.
(2) NESHAP for Portland Cement (40 CFR Part 63, Subpart LLL);
Docket ID Number OECA-2005-0040; EPA ICR Number 1801.04; OMB Control
Number 2060-0416; expiration date October 31, 2005.
(3) NESHAP for Inorganic Arsenic Emissions from Glass Manufacturing
Plants (40 CFR Part 61, Subpart N); Docket ID Number OECA-2005-0034;
EPA ICR Number 1081.08; OMB Control Number 2060-0043; expiration date
October 31, 2005.
(4) NSPS for Sulfuric Acid Plants (40 CFR Part 60, Subpart H);
Docket ID Number OECA-2005-0025; EPA ICR
[[Page 24022]]
Number 1057.10; OMB Control Number 2060-0041; expiration date October
31, 2005.
(5) NSPS for Primary and Secondary Emissions from Basic Oxygen
Furnaces (40 CFR Part 60, Subparts N and Na); Docket ID Number OECA-
2005-0044; EPA ICR Number 1069.08; OMB Control Number 2060-0029;
expiration date October 31, 2005.
(6) NESHAP for Primary Lead Smelters (40 CFR Part 63, Subpart TTT);
Docket ID Number OECA-2005-0046; EPA ICR Number 1856.05; OMB Control
Number 2060-0414; expiration date October 31, 2005.
(7) NSPS for Petroleum Refineries (40 CFR Part 60, Subpart J);
Docket ID Number OECA-2005-0016; EPA ICR Number 1054.09; OMB Control
Number 2060-0022; expiration date November 30, 2005.
(8) NESHAP for Source Categories Generic Maximum Achievable Control
Technology Standards (40 CFR Part 63, Subpart YY); Docket ID Number
OECA-2005-0030; EPA ICR Number 1871.04; OMB Control Number 2060-0420;
expiration date December 31, 2005.
(9) NSPS for Municipal Solid Waste Landfills (40 CFR Part 60,
Subpart WWW); Docket ID Number OECA-2005-0029; EPA ICR Number 1557.06;
OMB Control Number 2060-0220; expiration date October 31, 2005.
(10) NSPS for Calciners and Dryers in Mineral Industries (40 CFR
Part 60, Subpart UUU); Docket ID Number OECA-2005-0024; EPA ICR Number
0746.06; OMB Control Number 2060-0251; expiration date December 31,
2005.
(11) NSPS for Metal Coil Surface Coating (40 CFR Part 60, Subpart
TT); Docket ID Number OECA-2005-0037; EPA ICR Number 0660.09; OMB
Control Number 2060-0107; expiration date December 31, 2005.
(12) NSPS for Bulk Gasoline Terminals (40 CFR part 60, Subpart XX);
Docket ID Number OECA-2005-0017; EPA ICR Number 0664.08; OMB Control
Number 2060-0006; expiration date December 31, 2005.
(13) NSPS for Equipment Leaks of VOC in Petroleum Refineries (40
CFR Part 60, Subpart GGG); Docket ID Number OECA-2005-0018; EPA ICR
Number 0983.08; OMB Control Number 2060-0067; expiration date December
31, 2005.
(14) NSPS for Glass Manufacturing Plants (40 CFR Part 60, Subpart
CC); Docket ID Number OECA-2005-0027; EPA ICR Number 1131.08; OMB
Control Number 2060-0054; expiration date December 31, 2005.
(15) NESHAP for Wet-Formed Fiberglass Mat Production (40 CFR Part
63, Subpart HHHH); Docket ID Number OECA-2005-0048; EPA ICR Number
1964.03; OMB Control Number 2060-0496; expiration date December 31,
2005.
(16) NESHAP for Asbestos (40 CFR Part 61, Subpart M); Docket ID
Number OECA-2005-0019; EPA ICR Number 0111.11; OMB Control Number 2060-
0101; expiration date March 31, 2006.
(17) NSPS for Beverage Can Surface Coating (40 CFR Part 60, Subpart
WW); Docket ID Number OECA-2005-0038; EPA ICR Number 0663.09; OMB
Control Number 2060-0001; expiration date April 30, 2006.
(18) NSPS for Grain Elevators (40 CFR Part 60, Subpart DD); Docket
ID Number OECA-2005-0026; EPA ICR Number 1130.08; OMB Control Number
2060-0082; expiration date April 30, 2006.
(19) NSPS for Kraft Pulp Mills (40 CFR Part 60, Subpart BB); Docket
ID Number OECA-2005-0039; EPA ICR Number 1055.08; OMB Control Number
2060-0021; expiration date April 30, 2006.
(20) NSPS for Lime Manufacturing (40 CFR Part 60, Subpart HH);
Docket ID Number OECA-2005-0028; EPA ICR Number 1167.08; OMB Control
Number 2060-0063; expiration date April 30, 2006.
(21) NSPS for Hot Mix Asphalt Facilities (40 CFR Part 60, Subpart
I); Docket ID Number OECA-2005-0045; EPA ICR Number 1127.08; OMB
Control Number 2060-0083; expiration date April 31, 2006.
(22) NESHAP for Municipal Solid Waste Landfills (40 CFR Part 63,
Subpart AAAA); Docket ID Number OECA-2005-0031; EPA ICR Number 1938.03;
OMB Control Number 2060-0505; expiration date April 30, 2006.
(23) NESHAP for the Wood Building Products Surface Coating Industry
(40 CFR Part 63, Subpart WWWW); Docket ID Number OECA-2005-0043; EPA
ICR Number 2034.03; OMB Control Number 2060-0510; expiration date May
31, 2006.
(24) NESHAP for Reinforced Plastics Composites Production (40 CFR
Part 63, Subpart WWWW); Docket ID Number OECA-2005-0049; EPA ICR Number
1976.03; OMB Control Number 2060-0509; expiration date May 31, 2006.
(25) NESHAP for Publicly Owned Treatment Works (40 CFR Part 63,
Subpart VVV); Docket ID Number OECA-2005-0035; EPA ICR Number 1891.04;
OMB Control Number 2060-0428; expiration date May 31, 2006.
(26) NESHAP for Metal Furniture Surface Coating (40 CFR Part 63,
Subpart RRRR); Docket ID Number OECA-2005-0041; EPA ICR Number 1952.03;
OMB Control Number 2060-0518; expiration date May 31, 2006.
(27) NESHAP for Asphalt Processing and Asphalt Roofing
Manufacturing (40 CFR Part 63, Subpart LLLLL); Docket ID Number OECA-
2005-0051; EPA ICR Number 2029.03; OMB Control Number 2060-0520;
expiration date May 31, 2006.
(28) NESHAP for Flexible Polyurethane Foam Fabrication 40 CFR Part
63, Subpart MMMMM); Docket ID Number OECA-2005-0033; EPA ICR Number
2027.03; OMB Control Number 2060-0516; expiration date May 31, 2006.
(29) NESHAP for Paper and Other Web Coating (40 CFR Part 63,
Subpart JJJJ); Docket ID Number OECA-2005-0032; EPA ICR Number 1951.03;
OMB Control Number 2060-0511; expiration date May 31, 2006.
(30) NESHAP for Coke Oven Pushing Quenching and Battery Stacks (40
CFR Part 63, Subpart CCCCC); Docket ID Number OECA-2005-0050; EPA ICR
Number 1995.03; OMB Control Number 2060-0521; expiration date May 31,
2006.
(31) NESHAP for Printing, Coating and Dyeing of Fabrics and Other
Textiles (40 CFR Part 63, Subpart OOOO); Docket ID Number OECA-2005-
0023; EPA ICR Number 2071.03; OMB Control Number 2060-0522; expiration
date May 31, 2006.
(32) NESHAP for Refractory Products Manufacturing (40 CFR Part 63,
Subpart SSSSS); Docket ID Number OECA-2005-0022; EPA ICR Number
2040.03; OMB Control Number 2060-0515; expiration date May 31, 2006.
(33) NESHAP for Brick and Structural Clay Manufacturing (40 CFR
Part 63, Subpart JJJJJ); Docket ID Number OECA-2005-0021; EPA ICR
Number 2022.03; OMB Control Number 2060-0508; expiration date May 31,
2006.
(34) NESHAP for Benzene Waste Operations (40 CFR Part 61, Subpart
FF); Docket ID Number OECA-2005-0020; EPA ICR Number 1541.08; OMB
Control Number 2060-0183; expiration date May 31, 2006.
(35) NESHAP for the Surface Coating of Large Household and
Commercial Appliances (40 CFR Part 63, Subpart NNNN); Docket ID Number
OECA-2005-0042; EPA ICR Number 1954.03; OMB Control Number 2060-0457;
expiration date May 31, 2006.
(36) State and Federal Emission Guidelines for Hospital/Medical/
Infectious Waste Incinerators (40 CFR Part 60, Subpart Ce and 40 CFR
Part 62, Subpart HHH); Docket ID Number OECA-2005-0036; EPA ICR Number
1899.03; OMB Control Number 2060-0422; expiration date May 31, 2006.
[[Page 24023]]
C. Contact Individuals for ICRs
(1) NESHAP for Steel Pickling, HCl Process Facilities and
Hydrochloric Acid Regeneration Plants (40 CFR Part 63, Subpart CCC);
Mar[iacute]a Malav[eacute] in the Office of Compliance at (202) 564-
7027 or via e-mail to: malave.maria@epa.gov; EPA ICR Number 1821.05;
OMB Control Number 2060-0419; expiration date October 31, 2005.
(2) NESHAP for Portland Cement (40 CFR Part 63, Subpart LLL);
Leonard Lazarus of the Office of Compliance at (202) 564-6369 or via e-
mail to: lazarus.leonard@epa.gov; EPA ICR Number 1801.04; OMB Control
Number 2060-0416; expiration date October 31, 2005.
(3) NESHAP for Inorganic Arsenic Emissions from Glass Manufacturing
Plants (40 CFR Part 61, Subpart N); Learia Williams of the Office of
Compliance at (202) 564-4113 or via e-mail to: williams.learia@epa.gov;
EPA ICR Number 1081.08; OMB Control Number 2060-0043; expiration date
October 31, 2005.
(4) NSPS for Sulfuric Acid Plants (40 CFR Part 60, Subpart H);
Learia Williams of the Office of Compliance at (202) 564-4113 or via e-
mail to: williams.learia@epa.gov; EPA ICR Number 1057.10; OMB Control
Number 2060-0041; expiration date October 31, 2005.
(5) NSPS for Primary and Secondary Emissions from Basic Oxygen
Furnaces (40 CFR Part 60, Subparts N and Na); Mar[iacute]a
Malav[eacute] in the Office of Compliance at (202) 564-7027 or via e-
mail to: malave.maria@epa.gov; EPA ICR Number 1069.08; OMB Control
Number 2060-0029; expiration date October 31, 2005.
(6) NESHAP for Primary Lead Smelters (40 CFR Part 63, Subpart TTT);
Mar[iacute]a Malav[eacute] in the Office of Compliance at (202) 564-
7027 or via e-mail to: malave.maria@epa.gov; EPA ICR Number 1856.05;
OMB Control Number 2060-0414; expiration date October 31, 2005.
(7) NSPS for Petroleum Refineries (40 CFR Part 60, Subpart J); Dan
Chadwick of the Office of Compliance at (202) 564-7054 or via e-mail to
chadwick.dan@epa.gov; EPA ICR Number 1054.09; OMB Control Number 2060-
0022; expiration date November 30, 2005.
(8) NESHAP for Source Categories Generic Maximum Achievable Control
Technology Standards (40 CFR Part 63, Subpart YY); Learia Williams of
the Office of Compliance at (202) 564-4113 or via e-mail to:
williams.learia@epa.gov; EPA ICR Number 1871.04; OMB Control Number
2060-0420; expiration date December 31, 2005.
(9) NSPS for Municipal Solid Waste Landfills (40 CFR Part 60,
Subpart WWW); Learia Williams of the Office of Compliance at (202) 564-
4113 or via e-mail to: williams.learia@epa.gov; EPA ICR Number 1557.06;
OMB Control Number 2060-0220; expiration date October 31, 2005.
(10) NSPS for Calciners and Dryers in Mineral Industries (40 CFR
Part 60, Subpart UUU); Learia Williams of the Office of Compliance at
(202) 564-4113 or via e-mail to: williams.learia@epa.gov; EPA ICR
Number 0746.06; OMB Control Number 2060-0251; expiration date December
31, 2005.
(11) NSPS for Metal Coil Surface Coating (40 CFR Part 60, Subpart
TT); Leonard Lazarus of the Office of Compliance at (202) 564-6369 or
via e-mail to: lazarus.leonard@epa.gov; EPA ICR Number 0660.09; OMB
Control Number 2060-0107; expiration date December 31, 2005.
(12) NSPS for Bulk Gasoline Terminals (40 CFR Part 60, Subpart XX);
Dan Chadwick of the Office of Compliance at (202) 564-7054 or via e-
mail to chadwick.dan@epa.gov; EPA ICR Number 0664.08; OMB Control
Number 2060-0006; expiration date December 31, 2005.
(13) NSPS for Equipment Leaks of VOC in Petroleum Refineries (40
CFR Part 60, Subpart GGG); Dan Chadwick of the Office of Compliance at
(202) 564-7054 or via e-mail to chadwick.dan@epa.gov; EPA ICR Number
0983.08; OMB Control Number 2060-0067; expiration date December 31,
2005.
(14) NSPS for Glass Manufacturing Plants (40 CFR Part 60, Subpart
CC); Learia Williams of the Office of Compliance at (202) 564-4113 or
via e-mail to: williams.learia@epa.gov; EPA ICR Number 1131.08; OMB
Control Number 2060-0054; expiration date December 31, 2005.
(15) NESHAP for Wet-Formed Fiberglass Mat Production (40 CFR Part
63, Subpart HHHH); Mar[iacute]a Malav[eacute] in the Office of
Compliance at (202) 564-7027 or via e-mail to: malave.maria@epa.gov;
EPA ICR Number 1964.03; OMB Control Number 2060-0496; expiration date
December 31, 2005.
(16) NESHAP for Asbestos (40 CFR Part 61, Subpart M); Dan Chadwick
of the Office of Compliance at (202) 564-7054 or via e-mail to
chadwick.dan@epa.gov; EPA ICR Number 0111.11; OMB Control Number 2060-
0101; expiration date March 31, 2006.
(17) NSPS for Beverage Can Surface Coating (40 CFR Part 60, Subpart
WW); Leonard Lazarus of the Office of Compliance at (202) 564-6369 or
via e-mail to: lazarus.leonard@epa.gov; EPA ICR Number 0663.09; OMB
Control Number 2060-0001; expiration date April 30, 2006.
(18) NSPS for Grain Elevators (40 CFR Part 60, Subpart DD); Learia
Williams of the Office of Compliance at (202) 564-4113 or via e-mail
to: williams.learia@epa.gov; EPA ICR Number 1130.08; OMB Control Number
2060-0082; expiration date April 30, 2006.
(19) NSPS for Kraft Pulp Mills (40 CFR Part 60, Subpart BB);
Leonard Lazarus of the Office of Compliance at (202) 564-6369 or via e-
mail to: lazarus.leonard@epa.gov; EPA ICR Number 1055.08; OMB Control
Number 2060-0021; expiration date April 30, 2006.
(20) NSPS for Lime Manufacturing (40 CFR Part 60, Subpart HH);
Learia Williams of the Office of Compliance at (202) 564-4113 or via e-
mail to: williams.learia@epa.gov; EPA ICR Number 1167.08; OMB Control
Number 2060-0063; expiration date April 30, 2006.
(21) NSPS for Hot Mix Asphalt Facilities (40 CFR Part 60, Subpart
I); Mar[iacute]e Malav[eacute] in the Office of Compliance at (202)
564-7027 or via e-mail to: malave.maria@epa.gov; EPA ICR Number
1127.08; OMB Control Number 2060-0083; expiration date April 31, 2006.
(22) NESHAP for Municipal Solid Waste Landfills (40 CFR Part 63,
Subpart AAAA); Learia Williams of the Office of Compliance at (202)
564-4113 or via e-mail to: williams.learia@epa.gov; EPA ICR Number
1938.03; OMB Control Number 2060-0505; expiration date April 30, 2006.
(23) NESHAP for the Wood Building Products Surface Coating Industry
(40 CFR Part 63, Subpart WWWW); Leonard Lazarus of the Office of
Compliance at (202) 564-6369 or via e-mail to: lazarus.leonard@epa.gov;
EPA ICR Number 2034.03; OMB Control Number 2060-0510; expiration date
May 31, 2006.
(24) NESHAP for Reinforced Plastics Composites Production (40 CFR
Part 63, Subpart WWWW); Mar[iacute]a Malav[eacute] in the Office of
Compliance at (202) 564-7027 or via e-mail to: malave.maria@epa.gov;
EPA ICR Number 1976.03; OMB Control Number 2060-0509; expiration date
May 31, 2006.
(25) NESHAP for Publicly Owned Treatment Works (40 CFR Part 63,
Subpart VVV); Gregory Fried of the
[[Page 24024]]
Office of Compliance at (202) 564-7016 or via e-mail to:
fried.gregory@epa.gov; EPA ICR Number 1891.04; OMB Control Number 2060-
0428; expiration date May 31, 2006.
(26) NESHAP for Metal Furniture Surface Coating (40 CFR Part 63,
Subpart RRRR); Leonard Lazarus of the Office of Compliance at (202)
564-6369 or via e-mail to: lazarus.leonard@epa.gov; EPA ICR Number
1952.03; OMB Control Number 2060-0518; expiration date May 31, 2006.
(27) NESHAP for Asphalt Processing and Asphalt Roofing
Manufacturing (40 CFR Part 63, Subpart LLLLL); Mar[iacute]e
Malav[eacute] in the Office of Compliance at (202) 564-7027 or via e-
mail to: malave.maria@epa.gov; EPA ICR Number 2029.03; OMB Control
Number 2060-0520; expiration date May 31, 2006.
(28) NESHAP for Flexible Polyurethane Foam Fabrication 40 CFR Part
63, Subpart MMMMM); Learia Williams of the Office of Compliance at
(202) 564-4113 or via e-mail to: williams.learia@epa.gov; EPA ICR
Number 2027.03; OMB Control Number 2060-0516; expiration date May 31,
2006.
(29) NESHAP for Paper and Other Web Coating (40 CFR Part 63,
Subpart JJJJ); Learia Williams of the Office of Compliance at (202)
564-4113 or via e-mail to: williams.learia@epa.gov; EPA ICR Number
1951.03; OMB Control Number 2060-0511; expiration date May 31, 2006.
(30) NESHAP for Coke Oven Pushing Quenching and Battery Stacks (40
CFR Part 63, Subpart CCCCC); Mar[iacute]e Malav[eacute] in the Office
of Compliance at (202) 564-7027 or via e-mail to: malave.maria@epa.gov;
EPA ICR Number 1995.03; OMB Control Number 2060-0521; expiration date
May 31, 2006.
(31) NESHAP for Printing, Coating and Dyeing of Fabrics and Other
Textiles (40 CFR Part 63, Subpart OOOO); Learia Williams of the Office
of Compliance at (202) 564-4113 or via e-mail to:
williams.learia@epa.gov; EPA ICR Number 2071.03; OMB Control Number
2060-0522; expiration date May 31, 2006.
(32) NESHAP for Refractory Products Manufacturing (40 CFR Part 63,
Subpart SSSSS); Learia Williams of the Office of Compliance at (202)
564-4113 or via e-mail to: williams.learia@epa.gov; EPA ICR Number
2040.03; OMB Control Number 2060-0515; expiration date May 31, 2006.
(33) NESHAP for Brick and Structural Clay Manufacturing (40 CFR
Part 63, Subpart JJJJJ); Learia Williams of the Office of Compliance at
(202) 564-4113 or via e-mail to: williams.learia@epa.gov; EPA ICR
Number 2022.03; OMB Control Number 2060-0508; expiration date May 31,
2006.
(34) NESHAP for Benzene Waste Operations (40 CFR Part 61, Subpart
FF); Dan Chadwick of the Office of Compliance at (202) 564-7054 or via
e-mail to chadwick.dan@epa.gov; EPA ICR Number 1541.08; OMB Control
Number 2060-0183; expiration date May 31, 2006.
(35) NESHAP for the Surface Coating of Large Household and
Commercial Appliances (40 CFR Part 63, Subpart NNNN); Leonard Lazarus
of the Office of Compliance at (202) 564-6369 or via e-mail to:
lazarus.leonard@epa.gov; EPA ICR Number 1954.03; OMB Control Number
2060-0457; expiration date May 31, 2006.
(36) State and Federal Emission Guidelines for Hospital/Medical/
Infectious Waste Incinerators (40 CFR Part 60, Subpart Ce and 40 CFR
Part 62, Subpart HHH); Gregory Fried of the Office of Compliance at
(202) 564-7016 or via e-mail to: fried.gregory@epa.gov; EPA ICR Number
1899.03; OMB Control Number 2060-0422; expiration date May 31, 2006.
D. Information for Individual ICRs
(1) NESHAP for Steel Pickling, HCl Process Facilities and
Hydrochloric Acid Regeneration Plants (40 CFR Part 63, Subpart CCC);
EPA ICR Number 1821.05; OMB Control Number 2060-0419; expiration date
October 31, 2005.
Affected Entities: Entities potentially affected by this action are
facilities that pickle steel using hydrochloric acid or regenerate
hydrochloric acid.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Steel Pickling, published at 40 CFR part 63,
subpart CCC, were proposed on September 18, 1997 (62 FR 49051), and
promulgated on June 22, 1999 (64 FR 33202). This standard establishes
limits for hydrochloric acid emissions from continuous and batch
pickling lines and acid regeneration units and limits for chlorine
emissions from acid regeneration units. Also, operational and equipment
standards are established for stationary acid storage vessels.
The monitoring, recordkeeping, and reporting requirements outlined
in the standard are the same as those required for other NESHAP
standards. Plants must demonstrate compliance with the emission
standards by monitoring their control devices and performing annual
emissions testing. Consistent with the NESHAP General Provisions (40
CFR Part 63, Subpart A), respondents submit one-time notifications of
applicability and a one-time report on the performance test results for
the primary emission control device. Plants also must develop and
implement a startup, shutdown, and malfunction Plan. Sources are
required to submit semiannual reports including periods of exceedances
or a statement of compliance certifying that no exceedances have
occurred. The standard also requires the owner or operator to submit a
written maintenance plan for each emission control device. Records
shall be maintained for a period of five years. Records of the most
recent two years of operation must be maintained onsite.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 71 with 231
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 25,104 hours. On average,
each respondent reported 3.3 times per year and spent 109 hours
preparing each response.
The total annualized cost for continuous emissions monitoring was
$8,388, which was comprised of capital/startup costs of $830 for and
operation and maintenance (O&M) costs of $7,558.
(2) NESHAP for Portland Cement (40 CFR Part 63, Subpart LLL); EPA
ICR Number 1801.04; OMB Control Number 2060-0416; expiration date
October 31, 2005.
Affected Entities: Entities potentially affected by this action are
owners or operators of portland cement manufacturing plants.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Portland Cement were promulgated on June 14,
1999. The affected entities are subject to the General Provisions of
the National Emission Standards for Hazardous Air Pollutants (NESHAP)
at 40 CFR part 63, subpart A that apply to all NESHAP sources. These
requirements include recordkeeping and reporting for startup, shutdown,
malfunctions, and semiannual reporting. Exceptions to the General
Provisions for this source category are delineated in the standard and
include initial notifications to the Agency for new, reconstructed and
existing.
Respondents submit notifications and reports of performance test
results. Respondents must also: Develop and implement a startup,
shutdown and a malfunction plan; submit semiannual reports; develop and
implement an operations and maintenance plan;
[[Page 24025]]
conduct and report the results of an annual combustion system
inspection.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 107 with 214
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 53,181 hours. On average,
each respondent reported 2.0 times per year and 249 hours were spent
preparing each response. The total annualized cost was $685,000, which
was comprised of no capital/startup costs and operation and maintenance
costs of $685,000.
(3) NESHAP for Inorganic Arsenic Emissions from Glass Manufacturing
Plants (40 CFR Part 61, Subpart N); EPA ICR Number 1081.08; OMB Control
Number 2060-0043; expiration date October 31, 2005.
Affected Entities: Entities potentially affected by this action are
each glass melting furnace that uses commercial arsenic as a raw
material. These standards do not apply to pot furnaces. In addition,
rebricking is not considered construction or modification for the
purposes of this standard.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Inorganic Arsenic Emissions from Glass
Manufacturing Plants (40 CFR Part 61, Subpart N) were proposed on July
20, 1983, and promulgated on August 4, 1986. The standards were amended
on May 31, 1990, to add an alternative test method. The affected
entities are subject to the General Provision of the National Emission
Standards for Hazardous Air Pollutants (NESHAP) at 40 CFR part 61,
subpart A and any changes, or additions to the General Provisions
specified at 40 CFR part 61, subpart N.
In general, all NESHAP standards require initial notifications,
performance tests, and periodic reports. Owners or operators are also
required to maintain records of the occurrence and duration of any
startup, shutdown, or malfunction in the operation of an affected
facility, or any period during which the monitoring system is
inoperative. These notifications, reports, and records are essential in
determining compliance, and are required of all sources subject to
NESHAP.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 28 with 31
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 4,524 hours. On average,
each respondent reported 1.1 times per year and 146 hours were spent
preparing each response. The total annualized cost was $98,000, which
was comprised of no capital/startup costs and operation and maintenance
costs of $98,000.
(4) NSPS for Sulfuric Acid Plants (40 CFR Part 60, Subpart H); EPA
ICR Number 1057.10; OMB Control Number 2060-0041; expiration date
October 31, 2005.
Affected Entities: Entities potentially affected by this action are
any sulfuric acid plants.
Abstract: The New Source Performance Standards (NSPS) for Sulfuric
Acid Plants (40 CFR Part 60, Subpart H) were proposed on August 17,
1971 and promulgated on December 23, 1971. The affected entities are
subject to the General Provision of the New Source Performance
Standards (NSPS) at 40 CFR part 60, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 60,
subpart H. These standards apply to any sulfuric acid facility
commencing construction, modification or reconstruction after the date
of proposal.
In general, all NSPS standards require initial notifications,
performance tests, and periodic reports. Owners or operators are also
required to maintain records of the occurrence and duration of any
startup, shutdown, or malfunction in the operation of an affected
facility, or any period during which the monitoring system is
inoperative.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 106 with 212
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 23,320 hours. On average,
each respondent reported 2.0 times per year and 110 hours were spent
preparing each response. The responses were prepared semiannually. The
total annualized cost was $477,000, which was comprised of no capital/
startup cost and operation and maintenance costs of $477,000.
(5) NSPS for Primary and Secondary Emissions from Basic Oxygen
Furnaces (40 CFR Part 60, Subparts N and Na); EPA ICR Number 1069.08;
OMB Control Number 2060-0029; expiration date October 31, 2005.
Affected Entities: Entities potentially affected by this action are
sources with basic oxygen process furnace shops.
Abstract: The New Source Performance Standards (NSPS) for Primary
Emissions from Basic Oxygen Process Furnaces (BOPF) (40 CFR part 60,
subpart N) were proposed on June 11, 1973, and promulgated on March 8,
1974. On January 20, 1983, amendments to the standards of performance
for primary emissions from BOPF, merged with Standards of Performance
for Secondary Emissions from Basic Oxygen Process Steelmaking
Facilities (40 CFR part 60, subpart Na). Subpart Na is applicable to
any top-blown BOPF, hot metal transfer station or skimming station for
which construction, reconstruction, or modification commenced after
January 20, 1983.
The affected entities are subject to the General Provision of the
National Emission Standards for Hazardous Air Pollutants (NESHAP) at 40
CFR part 63, subpart A and any changes, or additions to the General
Provisions specified at 40 CFR part 63, subparts N and Na. NSPS
standards require sources to submit initial notifications, conduct
performance tests, and submit periodic reports. Owners or operators are
also required to maintain records of the occurrence and duration of any
startup, shutdown, or malfunction in the operation of an affected
facility, or any period during which the monitoring system is
inoperative. Monitoring requirements specific to BOPF shops subject to
NSPS subparts N and Na provide information on the operation of the
emissions control device and compliance with the mass and visible
emission standards. Semiannual reports of measurements that average 10
percent below the average measurements obtained during performance
tests are required.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was four with ten
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 1,012 hours. On average,
each respondent reported 2.5 times per year and spent 101 hours
preparing each response.
The total annualized cost for continuous emissions monitoring was
$25,794, which was comprised of capital/startup costs of $18,000 and
operation and maintenance (O&M) costs of $7,794.
(6) NESHAP for Primary Lead Smelters (40 CFR Part 63, Subpart TTT);
EPA ICR Number 1856.05; OMB Control Number 2060-0414; expiration date
is October 31, 2005.
Affected Entities: Entities potentially affected by this action are
sources with primary lead smelters.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Primary Lead Smelters, published at 40 CFR part
63, subpart TTT, were proposed on April 17, 1998 (63 FR 19200), and
promulgated on June 4, 1999 (64 FR 30204). On February 12,
[[Page 24026]]
1999, the Agency publicized a supplemental standard for ferroalloys,
mineral wool, primary copper, primary lead and wool fiberglass which
enhanced the requirements for bag leak detection systems in 40 CFR
63.1625 and 40 CFR 63.1655 by including an enforceable operating limit
in this standard.
The monitoring, recordkeeping, and reporting requirements outlined
in the standard are similar to those required for other NESHAP
standards. Plants must demonstrate compliance with the emission
standards by monitoring their control devices and performing annual
emissions testing. Consistent with the NESHAP General Provisions (40
CFR Part 63, Subpart A), all sources subject to this standard are
required to submit one-time notifications of applicability; a one-time
report on performance test results for the primary emission control
device; an initial report specifying the intended methods of
compliance; standard operating procedure manuals for baghouses and
fugitive dust control; and a semiannual report that includes a summary
of the monitoring results, any baghouse leak detection system alarms
and corrective actions. Sources must also maintain records of
production for unrefined lead, copper matte, and copper species; the
date and times of bag leak detection system alarms and the corrective
action taken; baghouse inspection and maintenance; any records required
as part of the source standard operating procedures manuals; and the
compliance methods chosen. These notifications, reports, and records
are essential in determining compliance, and are required of all
sources subject to NESHAP.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was two with four
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 12,273 hours. On average,
each respondent reported 2.0 times per year and spent 3,068 hours
preparing each response. The responses were prepared to meet semiannual
reporting requirements.
The total annualized cost associated with continuous emissions
monitoring was $6,452 which was comprised of capital/startup costs of
$4,000 and operation and maintenance costs of $2,452.
(7) NSPS for Petroleum Refineries (40 CFR Part 60, subpart J), EPA
ICR Number 1054.09; OMB Control Number 2060-0022; expiration date
November 30, 2005.
Affected Entities: Entities potentially affected by this action are
petroleum refineries.
Abstract: The New Source Performance Standards (NSPS) for Petroleum
Refineries was promulgated on March 8, 1974. The affected entities are
subject to the General Provisions of the NSPS at 40 CFR Part 60,
Subpart A and any changes, or additions to the General Provisions
specified at 40 CFR Part 60, Subpart J. In general, all NSPS require
initial notifications, performance tests, and periodic reports. Owners
or operators are also required to maintain records of the occurrence
and duration of any startup, shutdown, or malfunction in the operation
of an affected facility, or any period during which the monitoring
system is inoperative.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 240 with 240
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 17,359 hours. Each
respondent reported 1.0 times per year and the average public reporting
and recordkeeping burden for this collection is estimated to be 72
hours per response. The responses were prepared semiannually. There
were no capital/startup costs. However, there were operation and
maintenance costs in the previous ICR of $91,000.
(8) NESHAP for Source Categories Generic Maximum Achievable Control
Technology Standards (40 CFR Part 63, Subpart YY); EPA ICR Number
1871.04; OMB Control Number 2060-0420; expiration date December 31,
2005.
Affected Entities: Entities potentially affected by this action are
plants producing polycarbonates, acrylic and modacrylic fibers, acetal
resins and hydrogen fluoride.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Source Categories: Generic Maximum Achievable
Control Technology (hereafter, this subpart is referred to as the
``Generic MACT'') were proposed on October 14, 1998 at 63 FR 55178 and
promulgated on June 29, 1999 at 64 FR 34854. The standards apply to
hazardous air pollutant emissions in four source categories:
polycarbonates production, acrylic and modacrylic fibers Production,
acetal resins production and hydrogen fluoride production. On November
2, 2001, the Agency promulgated wastewater provisions amendments to the
Generic MACT applicable to wastewater streams for the first three
categories. The last category does not have wastewater streams. On June
7, 2002, the Agency made additional amendments as a direct ruling to
the Generic MACT to clarify definitions and the recordkeeping
provisions related to how readily accessible records should be
maintained.
The affected entities are subject to the General Provision of the
National Emission Standards for Hazardous Air Pollutants (NESHAP) at 40
CFR part 63, subpart A and any changes, or additions to the General
Provisions specified at 40 CFR part 63, subpart YY. In general, NESHAP
standards require initial notifications, performance tests, and
periodic reports. Owners or operators are also required to maintain
records of the occurrence and duration of any startup, shutdown, or
malfunction in the operation of an affected facility, or any period
during which the monitoring system is inoperative. The specific
monitoring and recordkeeping requirements vary for each source category
depending on the types of emissions control equipment and monitoring
equipment used to comply with the Generic MACT standards for their
category. These notifications, reports, and records are essential in
determining compliance, and are required of all sources subject to
NESHAP.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 10 with 30
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 4,077 hours. On average,
each respondent reported 3.0 times per year and 136 hours were spent
preparing each response. The responses were prepared semiannually. The
total annualized cost was $107,000, which was comprised of no capital/
startup costs and operation and maintenance costs of $107,000.
(9) NSPS for Municipal Solid Waste Landfills (40 CFR Part 60,
Subpart WWW); EPA ICR Number 1557.06; OMB Control Number 2060-0220;
expiration date October 31, 2005.
Affected Entities: Entities potentially affected by this action are
municipal solid waste landfills.
Abstract: The New Source Performance Standards (NSPS) for Municipal
Solid Waste Landfills (40 CFR Part 60, Subpart WWW) were proposed on
May 30, 1991 and promulgated on March 12, 1996. The affected entities
are subject to the General Provision of the New Source Performance
Standards (NSPS) at 40 CFR part 60, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 60,
subpart http://WWW. Owners and operators of the
[[Page 24027]]
affected facilities must make initial reports when a source becomes
subject to this standard: (1) To conduct and report on performance
tests, (2) report of annual or periodic emission rates, (3) report on
design plans, (4) report on equipment removal and closure, (5) maintain
records of the reports, system design and performance tests, monitoring
and exceedances, plot map, and well locations. The recordkeeping and
reporting requirements are specific to municipal solid waste landfills.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 175 with 299
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 3,390 hours. On average,
each respondent reported 1.7 times per year and 11 hours were spent
preparing each response. The responses were prepared annually and
quarterly. The total annualized cost was $107,000, which was comprised
of capital/startup costs of $105,000 and operation and maintenance
costs of $2,000.
(10) NSPS for Calciners and Dryers in Mineral Industries (40 CFR
Part 60, Subpart UUU); EPA ICR Number 0746.06; OMB Control Number 2060-
0251; expiration date December 31, 2005.
Affected Entities: Entities potentially affected by this action are
calciners and dryers at mineral processing plants. Entities subject to
NSPS 40 CFR part 60, subpart LL for metallic mineral processing plants
are not subject to this standard.
Abstract: The New Source Performance Standards (NSPS) for Calciners
and Dryers in Mineral Industries (40 CFR Part 60, Subpart UUU) were
proposed on April 23, 1986, and promulgated on September 28, 1992. The
affected entities are subject to the General Provision of the New
Source Performance Standards (NSPS) at 40 CFR part 60, subpart A and
any changes, or additions to the General Provisions specified at 40 CFR
part 60, subpart UUU. NSPS standards require initial notifications,
performance tests, and periodic reports. Owners or operators are also
required to maintain records of the occurrence and duration of any
startup, shutdown, or malfunction in the operation of an affected
facility, or any period during which the monitoring system is
inoperative.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 165 with 342
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 6,506 hours. On average,
each respondent reported 2.1 times per year and 19 hours were spent
preparing each response. The responses were prepared semiannually. The
total annualized cost was $115,000, which was comprised of capital/
startup costs of $8,000 and operation and maintenance costs of
$107,000.
(11) NSPS for Metal Coil Surface Coating (40 CFR Part 60, Subpart
TT); EPA ICR Number 0660.09; OMB Control Number 2060-0107; expiration
date December 31, 2005.
Affected Entities: Entities potentially affected by this action are
owners or operators of metal coil surface coating facilities.
Abstract: The New Source Performance Standards (NSPS) for Metal
Coil Surface Coating were promulgated on November 1, 1982. These
standards apply to metal coil surface coating facilities commencing
construction, modification or reconstruction after January 5, 1981.
The affected entities are subject to the General Provisions of the
NSPS at 40 CFR part 60, subpart A that apply to all NSPS sources. These
requirements include recordkeeping and reporting for startup, shutdown,
malfunctions and quarterly or semiannual reporting. Exceptions to the
General Provisions for this source category are delineated in the
standard and include initial notifications to the Agency for new,
reconstructed and existing affected entities.
Owners or operators of the affected facilities must make the
following one-time-only reports: Notification of the date of
construction or reconstruction; notification of the anticipated and
actual dates of a startup; notification of any physical or operational
change to an existing facility which may increase the regulated
pollutant emission rate; notification of the date of the initial
performance test; and results of the initial performance test. Owners
or operators are also required to maintain records of the occurrence
and duration of any startup, shutdown, or malfunction in the operation
of an affected facility, or any period during which the monitoring
system is inoperative. Where compliance is achieved through the use of
low volatile (VOC)coatings without emission control devices, or through
the use of higher VOC content coating in conjunction with emission
control devices, each owner or operator shall include in the initial
compliance report the weighted average of the VOC content of coatings
used during the period of each calendar month. When compliance is
achieved using an emission control device, each owner or operator shall
include in the initial compliance report the overall VOC destruction
rate used to attain compliance and the combustion temperature of the
thermal incinerator, or the gas temperature both upstream and
downstream of the incinerator catalyst bed. The standards also require
reports of incinerator temperature drop.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 165 with 404
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 14,531 hours. On average,
each respondent reported approximately 2.4 times per year and 36 hours
were spent preparing each response. The total annualized cost was
$318,000, which was comprised of capital/startup costs of $28,000 and
operation and maintenance costs of $290,000.
(12) NSPS for Bulk Gasoline Terminals (40 CFR Part 60, subpart XX),
EPA ICR Number 0664.08; OMB Control Number 2060-0006; expiration date
December 31, 2005.
Affected Entities: Entities potentially affected by this action are
Bulk Gasoline Terminals which deliver liquid product into gasoline tank
trucks.
Abstract: The New Source Performance Standards (NSPS) for Bulk
Gasoline Terminals were promulgated on August 18, 1983, and amended on
December 22, 1983. The affected entities are subject to the General
Provisions of the NSPS at 40 CFR Part 60, Subpart A and any changes, or
additions to the General Provisions specified at 40 CFR Part 60,
Subpart XX. Owners or operators of the affected facilities subject to
NSPS subpart XX must make the following one-time only reports:
notification of the date of construction or reconstruction;
notification of the anticipated and actual dates of startup;
notification of any physical or operational change to an existing
facility which may increase the regulated pollutant emission rate;
notification of the date of the initial performance test; and the
results of the initial performance test. Owners or operators are also
required to maintain records of the occurrence and duration of any
startup, shutdown, or malfunction in the operation of an affected
facility, or any period during which the monitoring system is
inoperative.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 40 with 40
responses per year. The annual industry reporting and recordkeeping
burden for this collection
[[Page 24028]]
of information was 11,420 hours. Each respondent provided 1.0 responses
per year. The average public reporting and recordkeeping burden for
this collection is estimated to be 286 hours per response. The
responses were prepared at one time only. There were no capital/startup
costs or operation and maintenance costs associated with continuous
emission monitoring in the previous ICR.
(13) NSPS for Equipment Leaks of VOC in Petroleum Refineries (40
CFR Part 60, subpart GGG), EPA ICR Number 0983.08; OMB Control Number
2060-0067; expiration date December 31, 2005.
Affected Entities: Entities potentially affected by this action are
compressors and all equipment within a process unit at petroleum
refineries.
Abstract: The New Source Performance Standards (NSPS) for Equipment
Leaks of VOC (Volatile Organic Compounds) in Petroleum Refineries were
promulgated on May 30, 1984. The affected entities are subject to the
General Provisions of the NSPS at 40 CFR Part 60, Subpart A and any
changes, or additions to the General Provisions specified at 40 CFR
Part 60, Subpart GGG. Facilities subject to this NSPS require initial
notifications, performance tests, and periodic reports. Owners or
operators are also required to maintain records of the occurrence and
duration of any startup, shutdown, or malfunction in the operation of
an affected facility, or any period during which the monitoring system
is inoperative. Monitoring requirements specific to NSPS subpart GGG
provide information on which components are leaking VOCs. NSPS subpart
GGG references the compliance requirements of NSPS subpart VV. Owners
or operators are required to periodically record information
identifying leaking equipment, repair methods used to stop the leaks,
and dates of repair. The responses were prepared weekly, monthly,
quarterly, semiannually, annually and one time only for initial
notifications. In addition, semiannual reports are required to measure
compliance with the standards of NSPS subpart VV as referenced by NSPS
subpart GGG.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 48 with 102
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 6,137 hours. Each
respondent provided 2.1 responses per year. The average public
reporting and recordkeeping burden for this collection is estimated to
be 60 hours per response. There were no capital/startup costs or
operation and maintenance costs associated with continuous emission
monitoring in the previous ICR.
(14) NSPS for Glass Manufacturing Plants (40 CFR Part 60, Subpart
CC); EPA ICR Number 1131.08; OMB Control Number 2060-0054; expiration
date December 31, 2005.
Affected Entities: Entities potentially affected by this action are
the glass melting furnaces located at a glass manufacturing plants.
Abstract: The New Source Performance Standards (NSPS) for 40 CFR
Part 60, Subpart CC were proposed on June 15, 1979, promulgated on
October 7, 1980, and amended on October 19, 1984. The affected entities
are subject to the General Provision of the New Source Performance
Standards (NSPS) at 40 CFR part 60, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 60,
subpart CC. These standards apply to each glass melting furnace located
at a glass manufacturing plant. NSPS standards require initial
notifications, performance tests, and periodic reports. Owners or
operators are also required to maintain records of the occurrence and
duration of any startup, shutdown, or malfunction in the operation of
an affected facility, or any period during which the monitoring system
is inoperative.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 45 with 87
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 590 hours. On average,
each respondent reported 1.9 times per year and seven hours were spent
preparing each response. The responses were prepared semiannually. The
total annualized cost was $261,000, which was comprised of no capital/
startup costs and operation and maintenance costs of $261,000.
(15) NESHAP for Wet-Formed Fiberglass Mat Production (40 CFR Part
63, Subpart HHHH); EPA ICR Number 1964.03; OMB Control Number 2060-
0496; expiration date December 31, 2005.
Affected Entities: Entities potentially affected by this action are
component processes at wet-formed fiberglass mat production facilities.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Primary Lead Smelters, published at 40 CFR part
63, subpart HHHH, were proposed on May 26, 2000 (65 FR 34251), and
promulgated on April 11, 2002 (67 FR 17823).
Owners and operators of affected sources are subject to the
monitoring, recordkeeping and reporting requirements of 40 CFR part 63,
subpart A, the General Provisions, unless specified otherwise in
subpart HHHH. This standard requires sources to submit initial
notifications, conduct performance tests, and submit periodic reports.
In addition, sources are required to maintain records of the occurrence
and duration of any startup, shutdown, or malfunction in the operation
of an affected facility; any period during which the monitoring system
is inoperative; bag leak detection system alarms, including corrective
actions; parametric monitoring data; system maintenance and
calibration; and opacity and visible emissions observations to
demonstrate initial and ongoing compliance with the standard.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 14 with 14
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 2,983 hours. On average,
each respondent reported 1.0 times per year and spent 213 hours
preparing each response.
The total annualized cost for continuous emissions monitoring was
$2,333, which was comprised of capital/startup costs only. This cost is
based on seven facilities installing continuous emission monitors.
There were no operation and maintenance costs associated with
continuous emission monitoring in the previous ICR.
(16) NESHAP for Asbestos (40 CFR Part 61, Subpart M), EPA ICR
Number 0111.11; OMB Control Number 2060-0101; expiration date March 31,
2006.
Affected Entities: Entities potentially affected by this action
are: (1) Those where demolition and renovation of facilities are taking
place, (2) those where disposal of asbestos is taking place, (3) those
where asbestos milling, manufacturing and fabricating are taking place,
(4) those where asbestos is being used on roadways, (5) those where
asbestos waste is being converted, and (6) those where asbestos is used
in insulation and sprayed on materials.
Abstract: The NESHAP for Asbestos was promulgated on November 20,
1990. The affected entities are subject to the General Provisions of
the NESHAP at 40 CFR Part 61, Subpart A and any changes or additions to
the General Provisions specified at 40 CFR Part 61, Subpart M.
Owners or operators of the affected milling, manufacturing,
fabricating, waste disposal, and waste conversion facilities must make
the following one-
[[Page 24029]]
time-only reports: notification of the date of construction or
reconstruction; notification of the anticipated and actual dates of
startup; notification of any physical or operational change to an
existing facility which may increase the regulated pollutant emission
rate. Owners or operators are also required to maintain records of the
occurrence and duration of any startup, shutdown, or malfunction in the
operation of an affected facility, or any period during which the
monitoring system is inoperative.
The recordkeeping requirements for the facilities mentioned above
consist of the occurrence and duration of any startup and malfunction
as described. They include the initial performance test results
including information necessary to determine the conditions of the
performance test, and performance test measurements and results,
including monitoring each potential source of asbestos emissions for
visible emissions to the outside air and inspecting air cleaning
devices to ensure proper operation. Records of startups, shutdowns, and
malfunctions should be noted as they occur. The reporting requirements
for this industry include the initial notifications, performance test
results and quarterly reports of instances when visible emissions are
observed at any time during the quarter.
Owners and operators of demolitions and renovations must notify EPA
in advance of the initiation of any asbestos removal work. The notice
provides information on the dates of operation, the nature of the
removal operation, the quantity of asbestos, and controls to be used.
The reviewing authority may then inspect the source to ensure
compliance with the standard. Demolitions and renovations tend to be
short-term projects and it is difficult at best to determine compliance
with the standard once the project has been completed. Therefore, it is
important that the delegated authority be notified of the changes as
necessary when information in the original notification changes.
Additionally, without notification of the changes, the Agency or
delegated authority may inspect a demolition or renovation site where
the project has been delayed. The demolition and renovation standard
requires that a representative (such as a foreman or management-level
person) trained in the provisions of the standard be present at the
facility. Evidence that the required training has been completed is
required in order to ensure compliance with this provision of the
standard. The standard requires asbestos removal contractors that claim
exemption from the wetting provisions because of freezing temperatures
to take temperature readings throughout the day and record the
information. The provisions require that all containers of asbestos
waste be labeled including the name of the waste generator and the
location of where the waste was generated. Owners or operators of
demolitions and renovations are required to prepare and maintain
records of each waste shipment as to its destination, the quantity of
waste, and the date of shipment, and to furnish a copy of the record to
disposal site owners or operators. The standard also requires that the
generators of asbestos waste attempt to reconcile instances in which a
signed copy of the waste shipment record is not received from the
disposal site and that the generator notify the Agency if delivery to
the disposal site cannot be confirmed.
Owners and operators of waste disposal sites are required to
document all asbestos waste shipments that are received and send a copy
of each record back to the generator. A record of the location and
quantity of asbestos in the landfill is required as well as noting the
presence and location of asbestos in the landfill property deed.
Disposal site owners and operators have to report to EPA any
discrepancies between the amount of waste designated on the waste
shipment record and the amount actually received, as well as instances
of improperly contained waste. An owner or operator of an operation in
which asbestos-containing materials are spray-applied must notify EPA
in advance of the spraying operation.
Any owner or operator subject to the provisions of this part shall
maintain a file of these measurements, and retain the file for at least
two years following the date of such measurements, and records.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 9,848 with
123,008 responses per year. The annual industry reporting and
recordkeeping burden for this collection of information was 342,249
hours. Each responded provided 13 responses per year. The average
recordkeeping and reporting burden for this ICR was 2.8 hours per
response. There were no capital/startup costs or operation and
maintenance costs associated with continuous emission monitoring in the
previous ICR.
(17) NSPS for Beverage Can Surface Coating (40 CFR Part 60, Subpart
WW); EPA ICR Number 0663.09; OMB Control Number 2060-0001; expiration
date April 30, 2006.
Affected Entities: Entities potentially affected by this action are
owners and operators of beverage can surface coating facilities.
Abstract: The New Source Performance Standards (NSPS) for Beverage
Can Surface Coating were promulgated on August 25, 1983.
The affected entities are subject to the General Provisions of the
New Source Performance Standards (NSPS) at 40 CFR part 60, subpart A
that apply to all NSPS sources. These requirements include
recordkeeping and reporting for startup, shutdown, malfunctions, and
semiannual reporting. Exceptions to the General Provisions for this
source category are delineated in the standard and include initial
notifications to the Agency for new, reconstructed and existing
affected entities. Volatile organic compounds (VOC) are the pollutants
regulated under the standards.
Respondents potentially affected by this action are facilities in
the beverage can surface coating industry including: each exterior base
coat operation, each over varnish coating operation, and each inside
spray coating operation. These standards apply to coating facilities
commencing construction, modification or reconstruction after November
26, 1980.
Owners or operators of the affected facilities described must make
the following one-time-only reports: notification of the date of
construction or reconstruction; notification of the anticipated and
actual dates of a startup; notification of any physical or operational
change to an existing facility which may increase the regulated
pollutant emission rate; notification of the date of the initial
performance test; and results of the initial performance test. Owners
or operators are also required to maintain records of the occurrence
and duration of any startup, shutdown, or malfunction in the operation
of an affected facility, or any period during which the monitoring
system is inoperative. Records must be maintained if the VOC content of
coatings is below the specified limits. If one or more coatings are
used, the volume weighted average of the total mass of VOC per volume
of coating solids must be recorded. When thermal or catalytic
incineration is performed, the owner shall keep records of each three-
hour period during which the incinerator temperature averaged more than
28 degrees Celsius below the temperature of the most recent performance
test at which destruction efficiency was determined. The owners or
operators shall identify, record and submit quarterly reports of each
[[Page 24030]]
instance in which the volume-weighted average of the total mass of VOC
per volume of coating solids exceeded the standard. If there are no
exceedances reports shall be submitted semiannually. Owners or
operators are required to maintain a file of all measurements including
the monitoring device, and performance testing measurements; all
monitoring device calibration check adjustments and maintenance
performed on these systems recorded in a permanent file.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 48 with 123
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 4,642 hours. On average,
each respondent reported 2.6 times per year and 38 hours were spent
preparing each response. The responses were prepared quarterly and
semiannually. The total annualized cost was $97,000, which was
comprised of capital/startup costs of $14,000 and operation and
maintenance costs of $83,000.
(18) NSPS for Grain Elevators (40 CFR Part 60, Subpart DD); EPA ICR
Number 1130.08; OMB Control Number 2060-0082; expiration date April 30,
2006.
Affected Entities: Entities potentially affected by this action are
operations at grain elevators.
Abstract: The New Source Performance Standards (NSPS) for grain
elevators were proposed on January 18, 1977 and promulgated on August
3, 1978. The affected entities are subject to the General Provision of
the New Source Performance Standards (NSPS) at 40 CFR part 60, subpart
A and any changes, or additions to the General Provisions specified at
40 CFR part 60, subpart DD. Owners or operators of the facilities must
make one-time-only notifications. Owners or operators are also required
to maintain records of the occurrence and duration of any startup,
shutdown, or malfunction in the operation of an affected facility, or
any period during which the monitoring system is inoperative.
Monitoring requirements specific to grain elevators provide information
on the operation of the emissions control device and compliance with
the opacity standard.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 132 with 155
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 259 hours. On average,
each respondent reported 1.2 times per year and 1.7 hours were spent
preparing each response. There were no capital/startup costs or
operation and maintenance costs associated with continuous emission
monitoring in the previous ICR.
(19) NSPS for Kraft Pulp Mills (40 CFR Part 60, Subpart BB); EPA
ICR Number 1055.08; OMB Control Number 2060-0021; expiration date April
30, 2006.
Affected Entities: Entities potentially affected by this action are
owners or operators of kraft pulp mills.
Abstract: The New Source Performance Standards (NSPS) for Kraft
Pulp Mills were promulgated on February 23, 1978.
The affected entities are subject to the General Provisions of the
New Source Performance Standards (NSPS) at 40 CFR part 60, subpart A
that apply to all NSPS sources. These requirements include
recordkeeping and reporting for startup, shutdown, malfunctions, and
semiannual reporting. Exceptions to the General Provisions for this
source category are delineated in the standard and include initial
notifications to the Agency for new, reconstructed and existing
affected entities.
Respondents potentially affected by this action are affected
facilities at kraft pulp mills including digester systems, brown stock
washer systems, multiple effect evaporator systems, recovery furnaces,
smelt dissolving tanks, lime kilns, and condensate stripper systems
that were constructed, modified or reconstructed after September 24,
1976. In pulp mills where kraft pulping is combined with neutral
sulfite semi-chemical pulping, the provisions of this subpart are
applicable when any portion of the material charged to an affected
facility is produced by the kraft pulping operation. A facility may be
exempt from the total reduced sulfur (TRS) standard if the facility can
demonstrate that TRS from a new, modified or reconstructed brown stock
washer cannot be technically nor economically feasiblely controlled.
In addition to the monitoring, recordkeeping and reporting
requirements listed in the General Provisions (40 CFR part 60, subpart
A), sources are required to record, at least once per shift, the
following specific parameters: The opacity of the gases discharged into
the atmosphere from any recovery furnace; the concentration of TRS
emissions on a dry basis and the percent of oxygen by volume on a dry
basis in the gases discharged into the atmosphere; for an incinerator,
the combustion temperature at the point of incineration of effluent
gases being emitted by the affected facilities; and for any lime kiln
or melt discharge tank using a scrubber emission control device, the
pressure loss of the gas stream through the control equipment and the
scrubbing liquid pressure to the control equipment. Sources are also
required to record on a daily basis 12-hour average TRS concentrations
and oxygen concentrations (for the recovery furnace and lime kiln) for
two consecutive periods of each operating.
Sources must report semiannually measurements of excess emissions
as defined by the standard for the applicable affected facility.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 92 with 194
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 12,107 hours. On the
average, each respondent reported approximately 2.1 times per year and
62 hours were spent preparing each response. The responses were
prepared semiannually. The total annual reporting and recordkeeping
cost burden for this collection of information was $3,144,000. This
included an annual cost of $300,000 associated with capital/startup
costs and $2,844,000 associated with the annual operation and
maintenance costs.
(20) NSPS for Lime Manufacturing (40 CFR Part 60, Subpart HH); EPA
ICR Number 1167.08; OMB Control Number 2060-0063; expiration date April
30, 2006.
Affected Entities: Entities potentially affected by this action are
rotary lime kiln used in lime manufacturing.
Abstract: The New Source Performance Standards (NSPS) for the
standards published at 40 CFR Part 60, Subpart HH were proposed on May
3, 1977, and promulgated on April 26, 1984. The affected entities are
subject to the General Provision of the New Source Performance
Standards (NSPS) at 40 CFR part 60, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 60,
subpart HH. The standards do not apply to facilities used in the
manufacture of lime at kraft pulp mills. NSPS standards require initial
notifications, performance tests, and periodic reports. Owners or
operators are also required to maintain records of the occurrence and
duration of any startup, shutdown, or malfunction in the operation of
an affected facility, or any period during which the monitoring system
is inoperative.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 55 with 106
responses per year. The annual industry reporting and recordkeeping
burden for this
[[Page 24031]]
collection of information was 4,434 hours. On average, each respondent
reported 1.9 times per year and 42 hours were spent preparing each
response. The total annualized cost was $92,000, which was comprised of
capital/startup costs of $15,000 and operation and maintenance costs of
$77,000.
(21) NSPS for Hot Mix Asphalt Facilities (40 CFR Part 60, Subpart
I); EPA ICR Number 1127.08; OMB Control Number 2060-0083; expiration
date April 31, 2006.
Affected Entities: Entities potentially affected by this standard
are emission sources at hot mix asphalt facilities.
Abstract: The New Source Performance Standards (NSPS) for Hot Mix
Asphalt Facilities were proposed on June 11, 1973, and promulgated on
July 25, 1977.
The affected entities are subject to the General Provision of the
New Source Performance Standards (NSPS) at 40 CFR part 60, subpart A
and any changes, or additions to the General Provisions specified at 40
CFR part 60, subpart I. NSPS standards require sources to submit
initial notifications, conduct performance tests, and submit periodic
reports. Owners or operators are also required to maintain records of
the occurrence and duration of any startup, shutdown, or malfunction in
the operation of an affected facility, or any period during which the
monitoring system is inoperative. Monitoring requirements specific to
hot mix asphalt facilities include particulate matter and opacity
monitoring. Semiannual reports of excess emissions are required. These
notifications, reports, and records are essential in determining
compliance.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 2,835 with
3,403 responses per year. The annual industry reporting and
recordkeeping burden for this collection of information was 10,303
hours. On average, each respondent reported 1.20 per year and spent
three hours preparing each response. There were no capital/startup
costs or operation and maintenance costs in the previous ICR.
(22) NESHAP for Municipal Solid Waste Landfills (40 CFR Part 63,
Subpart AAAA); EPA ICR Number 1938.03; OMB Control Number 2060-0505;
expiration date April 30, 2006.
Affected Entities: Entities potentially affected by this action are
municipal solid waste landfills (MSW) that: (1) Have a design capacity
of 2.5 million megagrams (Mg) and 2.5 million cubic meters (m3), and
(2) emit equal to or greater than 50 tons per year of nonmethane
organic compounds (NMOC)or operate as bioreactors.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Municipal Solid Waste Landfills (40 CFR Part
63, Subpart AAAA) were proposed on November 7, 2000, and promulgated on
January 16, 2003. The affected entities are subject to the General
Provision of the National Emission Standards for Hazardous Air
Pollutants (NESHAP) at 40 CFR part 63, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 63,
subpart AAAA. Each owner or operator of an MSW landfill affected by the
standard is required to submit semiannual compliance reports for
control device operating parameters. Owners and operators of affected
facilities also have to prepare a startup, shutdown, and malfunction
plan.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 1,330 with
1,330 responses per year. The annual industry reporting and
recordkeeping burden for this collection of information was 39,360
hours. On average, each respondent reported 1.0 times per year and 30
hours were spent preparing each response. The total annualized cost was
$13,000, which was comprised of no capital/startup costs and operation
and maintenance costs of $13,000.
(23) NESHAP for the Wood Building Products Surface Coating Industry
(40 CFR Part 63, Subpart WWWW); Docket ID Number OECA-2005-0043; EPA
ICR Number 2034.03; OMB Control Number 2060-0510; expiration date May
31, 2006.
Affected Entities: Entities potentially affected by this action are
owners and operators of wood building products surface coating
facilities.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for the wood building products surface coating
industry were promulgated on May 28, 2003.
The affected entities are subject to the General Provisions of the
National Emission Standards for Hazardous Air Pollutants (NESHAP) at 40
CFR part 63, subpart A that apply to all NESHAP sources. These
requirements include recordkeeping and reporting for startup, shutdown,
malfunctions, and semiannual reporting. Exceptions to the General
Provisions for this source category are delineated in the standard and
include initial notifications to the Agency for new, reconstructed and
existing affected entities, and notifications of compliance status.
Respondents are owners or operators of wood building products
surface coating facilities. Respondents shall submit notifications and
reports of initial and repeat performance test results. Facilities must
develop and implement a startup, shutdown, and malfunction plan and
submit semiannual reports of any event where the plan was not followed.
Facilities must develop and implement an operations and maintenance
plan and conduct and report the results of an annual combustion system
inspection. Semiannual reports for periods of operation during which
the monitoring parameters are exceeded or reports certifying that no
exceedances have occurred also are required.
General requirements applicable to all NESHAP require records of
applicability determinations; test results; exceedances; periods of
startups, shutdowns, or malfunctions; monitoring records; and all other
information needed to determine compliance with the applicable
standard.
Subpart WWWW requires respondents to maintain records of all
coatings, thinners, and cleaning materials data and calculations used
to determine compliance. This information includes the volume used
during each compliance period, mass fraction of organic HAP, density,
and, for coatings only, volume fraction of coating solids. If an add-on
control device is used, records will need to be kept of the capture
efficiency of the capture device, destruction or removal efficiency of
the control device, and the monitored operating parameters. In
addition, records need to be kept of emission calculations,
calculations, test results, and other supporting information.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 215 with 430
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 2,176 hours. On average,
each respondent reported 2.0 times per year and 5 hours were spent
preparing each response. The responses were prepared semiannually. The
total annualized cost was $22,000 which was comprised of capital/
startup costs of $22,000 and no operation and maintenance costs.
(24) NESHAP for Reinforced Plastics Composites Production (40 CFR
Part 63, Subpart WWWW); EPA ICR Number 1976.03; OMB Control Number
2060-0509; expiration date May 31, 2006.
Affected Entities: The entities affected by this action are
fugitive emission sources at reinforced plastic composites (RPC)
production facilities using resins, gel coats, and cleaning solvents.
[[Page 24032]]
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for reinforced plastic composites (RPC) production
operations and processes, published at 40 CFR part 63, subpart WWWW,
were proposed on August 2, 2001 (66 FR 40323), and promulgated on April
21, 2003 (68 FR 19375).
Owners and operators of affected sources are subject to the
monitoring, recordkeeping and reporting requirements of 40 CFR part 63,
subpart A, the General Provisions, unless specified otherwise in
subpart Whttp://WWW. This standard requires sources to submit initial
notifications, conduct performance tests, and submit periodic reports.
In addition, sources are required to maintain records of the occurrence
and duration of any startup, shutdown, or malfunction in the operation
of an affected facility; any period during which the monitoring system
is inoperative; bag leak detection system alarms, including corrective
actions; parametric monitoring data; system maintenance and
calibration; and opacity and visible emissions observations to
demonstrate initial and ongoing compliance with the standard. Records
of such measurements and actions are to be retained two years on-site
of the required total five years.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 469 with 548
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 13,785 hours. On average,
each respondent reported 1.2 times per year and spent 25 hours
preparing each response.
The total annualized cost for continuous emissions monitoring was
$15,807 which was comprised of no capital/startup costs and operation
and maintenance costs of $15,807.
(25) NESHAP for Publicly Owned Treatment Works (40 CFR Part 63,
Subpart VVV), EPA ICR Number 1891.04, OMB Control Number 2060-0428,
expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
publically owned treatment works (POTW) located at a major source of
hazardous air pollutant (HAP) emissions.
Abstract: The National Emissions Standards for Hazardous Air
Pollutants (NESHAP) for Publically Owned Treatment Works (40 CFR Part
63, Subpart VVV) were promulgated on October 26, 1999. Owners and
operators of affected sources are subject to the requirements of 40 CFR
Part 63, Subpart A, the General Provisions, unless specified otherwise
at subpart VVV. The standard requires that the respondents source
submit applications for approval of construction or reconstruction. The
information in the initial notification and the application for
construction or reconstruction. Respondents are also required to submit
one-time reports of (1) start of construction for new facilities and
(2) anticipated and actual start-up dates for new facilities. Subpart
VVV also requires affected sources to submit a notification of
compliance status. This notification must be signed by a responsible
company official who certifies its accuracy and certifies that the
source has complied with the standards.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection were six with six
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 216 hours. On average,
each respondent reported 1.0 times per year and 36 hours were spent
preparing each response. There were no capital/startup costs or
operation and maintenance costs associated wit this ICR.
(26) NESHAP for Metal Furniture Surface Coating (40 CFR Part 63,
Subpart RRRR); EPA ICR Number 1952.03; OMB Control Number 2060-0518;
expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
owners and operators of metal furniture surface coating facilities.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Metal Furniture Surface Coating were
promulgated on May 23,2003.
The affected entities are subject to the General Provisions of the
National Emission Standards for Hazardous Air Pollutants (NESHAP) at 40
CFR part 63, subpart A that apply to all NESHAP sources. These
requirements include recordkeeping and reporting for startup, shutdown,
malfunctions, and semiannual reporting. Exceptions to the General
Provisions for this source category are delineated in the standard and
include initial notifications to the Agency for new, reconstructed and
existing affected entities, and notifications of compliance status.
Respondents are owners or operators of metal furniture surface
coating facilities. Respondents shall submit notifications and reports
of performance test results. Facilities must develop and implement a
startup, shutdown, and malfunction plan and submit semiannual reports
of any event where the plan was not followed. Facilities must develop
and implement an operations and maintenance plan and conduct and report
the results of an annual combustion system inspection. Semiannual
reports for periods of operation during which the monitoring parameters
are exceeded (or reports certifying that no exceedances have occurred)
also are required.
General requirements applicable to all NESHAP require records of
applicability determinations; test results; exceedances; periods of
startups, shutdowns, or malfunctions; monitoring records; and all other
information needed to determine compliance with the applicable
standard.
Subpart RRRR requires respondents to maintain records of all
coatings, thinners, and cleaning materials data and calculations used
to determine compliance. This information includes the volume used
during each monthly compliance period, mass fraction organic HAP,
density, and, for coatings only, volume fraction solids. If an add-on
control device is used, records must be kept of the capture efficiency
of the capture system, destruction or removal efficiency of the add-on
control device, and the monitored operating parameters. In addition,
records must be kept of each emission calculation for each monthly
compliance period and all data, calculations, test results, and other
supporting information.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 576 with 576
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 45,672 hours. On average,
each respondent reported 1.0 times per year and 79 hours were spent
preparing each response. The responses were prepared semiannually.
There were no capital/startup costs or operation and maintenance costs
associated with continuous emission monitoring in the previous ICR.
(27) NESHAP for Asphalt Processing and Asphalt Roofing
Manufacturing (40 CFR Part 63, Subpart LLLLL); EPA ICR Number 2029.03;
OMB Control Number 2060-0520; expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
asphalt processing and asphalt roofing manufacturing facilities.
Abstract: Owners and operators of affected sources are subject to
the monitoring, recordkeeping and reporting requirements of 40 CFR part
63, subpart A, the General Provisions, unless specified otherwise in
subpart LLLLL. This standard requires sources to submit initial
notifications, conduct
[[Page 24033]]
performance tests, and submit periodic reports. In addition, sources
are required to maintain records of the occurrence and duration of any
startup, shutdown, or malfunction in the operation of an affected
facility; any period during which the monitoring system is inoperative;
bag leak detection system alarms, including corrective actions;
parametric monitoring data; system maintenance and calibration; and
opacity and visible emissions observations to demonstrate initial and
ongoing compliance with the standard.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 22 with 32
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 1,962 hours. On average,
each respondent reported 1.5 times per year and 61 hours were spent
preparing each response.
The total annualized cost was $277,689, which was comprised of no
capital/startup costs and operation and maintenance costs of $277,689.
(28) NESHAP for Flexible Polyurethane Foam Fabrication (40 CFR part
63, subpart MMMMM); EPA ICR Number 2027.03; OMB Control Number 2060-
0516; expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
flexible polyurethane foam fabrication operations.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Flexible Polyurethane Foam Fabrication (40 CFR
part 63, subpart MMMMM) were proposed on August 8, 2001, and
promulgated on April 14, 2003. The affected entities are subject to the
General Provision of the National Emission Standards for Hazardous Air
Pollutants (NESHAP) at 40 CFR part 63, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 63,
subpart MMMMM. For the purposes of this standard, flexible polyurethane
foam fabrication is divided into two subcategories: (1) Loop slitter
adhesive use and (2) flame lamination. For existing flame lamination
facilities, there are no emission limits or monitoring, inspection,
reporting, and recordkeeping (MIRR) requirements except for submission
of an initial notification. Therefore, each existing flame lamination
facilities submits an initial notification and does not perform any
other MIRR activities. Flame lamination facilities perform all the
activities necessary to comply with the emission limit and MIRR
requirements for new flame lamination sources.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was nine with 15
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 1,211 hours. On average,
each respondent reported 1.7 times per year and 81 hours were spent
preparing each response. The total annualized cost was $3,000, which
was comprised of capital/startup costs of $1,000 and operation and
maintenance costs of $2,000.
(29) NESHAP for Paper and Other Web Coating (40 CFR Part 63,
Subpart JJJJ); EPA ICR Number 1951.03; OMB Control Number 2060-0511;
expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
paper and other web coating operations.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Paper and Other Web Coating (40 CFR Part 63,
Subpart JJJJ) were proposed on September 13, 2000, and promulgated on
December 4, 2002. The affected entities are subject to the General
Provision of the National Emission Standards for Hazardous Air
Pollutants (NESHAP) at 40 CFR part 61, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 63,
subpart JJJJ.
This standard requires sources to submit initial notifications,
conduct performance tests, and submit periodic reports. In addition,
sources are required to maintain records of the occurrence and duration
of any startup, shutdown, or malfunction in the operation of an
affected facility; any period during which the monitoring system is
inoperative and to demonstrate initial and ongoing compliance with the
standard.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 441 with
1,477 responses per year. The annual industry reporting and
recordkeeping burden for this collection of information was 41,462
hours. On average, each respondent reported 3.3 times per year and 28
hours were spent preparing each response. The total annualized cost was
$2,928,000 which was comprised of capital/startup costs of $2,249,000
and operation and maintenance costs of $679,000.
(30) NESHAP for Coke Oven Pushing, Quenching and Battery Stacks (40
CFR Part 63, Subpart CCCCC); EPA ICR Number 1995.03; OMB Control Number
2060-0521; expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this standard
are coke oven batteries.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Coke Ovens: Pushing, Quenching, and Battery
Stacks, published at 40 CFR part 63, subpart CCCCC, were proposed on
July 3, 2001 (66 FR 35325), and promulgated on April 14, 2003 (68 FR
18007). Subsequently, the standard has been revised on several
occasions (i.e., through corrections and direct final standard
amendments) including April 22, 2003 (68 FR 19885), October 13, 2004
(69 FR 60813 and 69 FR 60837), and January 10, 2005 (70 FR 1670).
Owners and operators of affected sources are subject to the
monitoring, recordkeeping and reporting requirements of 40 CFR part 63,
subpart A, the General Provisions, unless as specified otherwise in 40
CFR part 63, subpart CCCCC. This standard requires the respondents to
submit initial notifications, conduct performance tests, and submit
periodic reports. In addition, sources are required to maintain records
of the occurrence and duration of any startup, shutdown, or malfunction
in the operation of an affected facility; any period during which the
monitoring system is inoperative; bag leak detection system alarms,
including corrective actions; parametric monitoring data; system
maintenance and calibration; and opacity and visible emissions
observations to demonstrate initial and ongoing compliance with the
standard.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was six with 30
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 2,209 hours. On average,
each respondent reported 5.0 times per year and spent 74 hours
preparing each response.
The total annualized cost was $83,000, which was comprised of
capital/startup costs of $32,000 and operation and maintenance costs of
$51,000.
(31) NESHAP for Printing, Coating and Dyeing of Fabrics and Other
Textiles (40 CFR Part 63, Subpart OOOO); EPA ICR Number 2071.03; OMB
Control Number 2060-0522; expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
fabric and other textiles printing, coating and dyeing operations.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Printing, Coating and
[[Page 24034]]
Dyeing of Fabrics and other Textiles (40 CFR Part 63, Subpart OOOO)
were proposed on July 11, 2002, promulgated on May 29, 2003 and amended
on August 4, 2004. The affected entities are subject to the General
Provision of the National Emission Standards for Hazardous Air
Pollutants (NESHAP) at 40 CFR part 63, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 63,
subpart OOOO.
This standard requires sources to submit initial notifications,
conduct performance tests, and submit periodic reports. In addition,
sources are required to maintain records of the occurrence and duration
of any startup, shutdown, or malfunction in the operation of an
affected facility; any period during which the monitoring system is
inoperative and to demonstrate initial and ongoing compliance with the
standard.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 138 with 222
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 29,491 hours. On average,
each respondent reported 1.6 times per year and 133 hours were spent
preparing each response. The total annualized cost was $141,000 which
was comprised of capital/startup costs of $136,000 and operation and
maintenance costs of $5,000.
(32) NESHAP for Refractory Products Manufacturing (40 CFR Part 63,
Subpart SSSSS); EPA ICR Number 2040.03; OMB Control Number 2060-0515;
expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
refractory products manufacturing facilities.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Refractory Products Manufacturing (40 CFR Part
63, Subpart SSSSS) were proposed on June 20, 2002, promulgated on April
16, 2003. The affected entities are subject to the General Provision of
the National Emission Standards for Hazardous Air Pollutants (NESHAP)
at 40 CFR part 63, subpart A and any changes, or additions to the
General Provisions specified at 40 CFR part 63, subpart SSSSS.
Respondents must submit one-time notifications of applicability and
reports on initial performance test results. Plants must develop and
implement a startup, shutdown, and malfunction plan; develop and
implement an operation, maintenance, and monitoring plan; and submit
semiannual reports of any event where the plans were not followed.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was eight with 24
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 726 hours. On average,
each respondent reported 3.0 times per year and 30 hours were spent
preparing each response. The total annualized cost was $46,000 which
was comprised of capital/startup costs of $45,000 and operation and
maintenance costs of $1,000.
(33) NESHAP for Brick and Structural Clay Manufacturing (40 CFR
Part 63, Subpart JJJJJ); EPA ICR Number 2022.03; OMB Control Number
2060-0508; expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
brick and structural clay manufacturing facilities.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Brick and Structural Clay Manufacturing (40 CFR
Part 63, Subpart JJJJJ) were proposed on July 22, 2002, promulgated on
May 16, 2003. The affected entities are subject to the General
Provision of the National Emission Standards for Hazardous Air
Pollutants (NESHAP) at 40 CFR part 63, subpart A and any changes, or
additions to the General Provisions specified at 40 CFR part 63,
subpart JJJJJ. The standard applies to existing large tunnel kilns. The
standard also applies to all new or reconstructed tunnel kilns
regardless of size. However, the emission limits in the standard are
different for new small and new large tunnel kilns. Small tunnel kilns
have design capacities of less than 10 tons per hour of fired product,
while large tunnel kilns have design capacities greater than or equal
to 10 tons per hour of fired product. Respondents must submit one-time
notifications of applicability and reports on initial performance test
results. Plants must develop and implement a startup, shutdown, and
malfunction plan and submit semiannual reports of any event where the
plan was not followed. Respondents must also develop and implement an
operation, maintenance, and monitoring plan covering each affected
source and each emission control device used for compliance with the
standard. Semiannual reports for periods of emission limitation
deviations (or reports certifying that no deviations have occurred)
also are required.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 77 with 74
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 17,471 hours. On average,
each respondent reported 1.0 times per year and 236 hours were spent
preparing each response. The total annualized cost was $120,000 which
was comprised of capital/startup costs of $115,000 and operation and
maintenance costs of $5,000.
(34) NESHAP for Benzene Waste Operations (40 CFR Part 61, Subpart
FF); EPA ICR Number 1541.08; OMB Control Number 2060-0183; expiration
date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
owners and operators of chemical manufacturing plants, coke by-product
recovery plants, and petroleum refineries, as well as owners and
operators of hazardous waste treatment, storage and disposal facilities
that treat, store, or dispose of hazardous waste.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for Benzene Waste Operations (40 CFR part 61,
subpart FF) were promulgated on March 7, 1990. The affected entities
are subject to the General Provisions specified at 40 CFR part 61,
subpart A and any changes, or additions to the General Provisions
specified at 40 CFR part 61, subpart FF.
Owners or operators of the affected facilities described must make
one-time-only notifications. Owners or operators are also required to
maintain records of the occurrence and duration of any startup,
shutdown, or malfunction in the operation of an affected facility, or
any period during which the monitoring system is inoperative.
Monitoring requirements specific to Benzene Waste Operations provide
information on the operation of the vapor control device and compliance
with the standard. Quarterly reports of excess emissions are required.
For this standard, there is a tiered threshold for burden.
Facilities managing waste containing less than 1 megagram of benzene
must simply certify to that affect and maintain documentation to
support their finding. Facilities managing more than 1 megagram and
less than 10 megagrams of benzene-containing waste must prepare an
initial certification, test annually to verify that their waste stream
still falls within this range and maintain documentation to support
these findings. Finally, facilities managing more than 10 megagrams of
waste must submit quarterly and annual reports documenting the results
of continuous monitoring.
Burden Statement: In the previously approved ICR, the estimated
number of
[[Page 24035]]
respondents for this information collection was 240 with 240 responses
per year with a total burden of 16,626 hours. Each respondent report
1.0 times per year. The average recordkeeping and reporting burden for
this ICR was 71 hours per response. There were no capital/startup costs
or operation and maintenance costs associated with continuous emission
monitoring in the previous ICR.
(35) NESHAP for the Surface Coating of Large Household and
Commercial Appliances (40 CFR part 63, subpart NNNN); Leonard Lazarus
of the Office of Compliance at (202) 564-6369 or via E-mail to:
lazarus.leonard@epa.gov; EPA ICR Number 1954.03; OMB Control Number
2060-0457; expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
owners and operators of large household and commercial appliance
surface coating facilities.
Abstract: The National Emission Standards for Hazardous Air
Pollutants (NESHAP) for the Surface Coating of Large Household and
Commercial Appliances were promulgated on July 23, 2002.
The affected entities are subject to the General Provisions of the
National Emission Standards for Hazardous Air Pollutants (NESHAP) at 40
CFR part 63, subpart A that apply to all NESHAP sources. These
requirements include recordkeeping and reporting for startup, shutdown,
malfunctions, and semiannual reporting. Exceptions to the General
Provisions for this source category are delineated in the standard and
include initial notifications to the Agency for new, reconstructed and
existing affected entities, and notifications of compliance status.
Respondents are owners or operators of large household and
commercial appliance surface coating facilities. Respondents shall
submit notifications (where applicable) and reports of initial and
repeat performance test results. Facilities must develop and implement
a startup, shutdown, and malfunction plan and submit semiannual reports
of any event where the plan was not followed. Facilities must develop
and implement an operations and maintenance plan and conduct and report
the results of an annual combustion system inspection. Semiannual
reports for periods of operation during which the monitoring parameters
are exceeded (or reports certifying that no exceedances have occurred)
also are required.
General requirements applicable to all NESHAP require records of
applicability determinations; test results; exceedances; periods of
startups, shutdowns, or malfunctions; monitoring records; and all other
information needed to determine compliance with the applicable
standard.
Subpart NNNN requires respondents to maintain records of all
coatings, thinners, and cleaning materials data and calculations used
to determine compliance. This information includes the volume used
during each monthly compliance period, mass fraction organic HAP,
density, and, for coatings only, volume fraction of coating solids. If
an add-on control device is used, records must be kept of the capture
efficiency of the capture system, destruction or removal efficiency of
the add-on control device, and the monitored operating parameters. In
addition, records must be kept of each emission calculation for each
monthly compliance period and all data, calculations, test results, and
other supporting information.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection was 82 with 16
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 7,737 hours. On average,
each respondent reported 0.2 times per year and 484 hours were spent
preparing each response. The responses were prepared semiannually. The
total annualized cost was $3,000, which was comprised of capital/
startup costs of $0 and operation and maintenance costs of $3,000.
(36) State and Federal Emission Guidelines for Hospital/Medical/
Infectious Waste Incinerators (40 CFR Part 60, Subpart Ce and 40 CFR
Part 62, Subpart HHH), EPA ICR Number 1899.03, OMB Control Number 2060-
0422, expiration date May 31, 2006.
Affected Entities: Entities potentially affected by this action are
hospital/medical/infectious waste incinerators (HMIWI).
Abstract: State and Federal Emission Guidelines for Hospital/
Medical/Infectious Waste Incinerators were promulgated on September 15,
1997 (40 CFR part 60, subpart Ce) and August 15, 2000 (40 CFR part 60,
subpart HHH). Owners and operators of affected sources are subject to
the requirements of 40 CFR part 60, subpart A, the General Provisions,
or 40 CFR part 62, subpart A unless specified otherwise at 40 CFR part
60, subpart Ce or 40 CFR part 62, subpart HHH. HMIWIs for which
construction was commenced on or before June 20, 1996, and burning
hospital waste and/or medical infectious waste are subject to specific
reporting and recording keeping requirements. Notification reports are
required related to the construction, reconstruction, or modification
of an HMIWI. Also required are one-time-only reports related to initial
performance test data and continuous measurements of site-specific
operating parameters. Annual compliance reports are required related to
a variety of site-specific operating parameters, including exceedances
of applicable limits. Semiannual compliance reports are required
related to emission rate or operating parameter data that were not
obtained when exceedances of applicable limits occurred.
Co-fired combustors and incinerators burning only pathological,
low-level radioactive, and/or chemotherapeutic waste are required to
submit notification reports of an exemption claim, and an estimate of
the relative amounts of waste and fuels to be combusted. Co-fired
combustors and incinerators are also required to maintain records on a
calendar quarter basis of the weight of hospital waste combusted, the
weight of medical/infectious waste combusted, and the weight of all
other fuels combusted at the co-fired combustor. Incinerators burning
only pathological, low-level radioactive, and/or chemotherapeutic waste
are also required to maintain records of the periods of time when only
pathological waste, low-level radioactive waste, and/or
chemotherapeutic waste is burned.
Burden Statement: In the previously approved ICR, the estimated
number of respondents for this information collection were 189 with 645
responses per year. The annual industry reporting and recordkeeping
burden for this collection of information was 105,228 hours. On
average, each respondent reported 3.4 times per year and 163 hours were
spent preparing each response. There were no capital/startup costs
associated with continuous emission monitoring in the previous ICR.
However, the operation and maintenance costs associated with continuous
emission monitoring in the previous ICR were estimated to be $295,407.
Dated: April 21, 2005.
Michael M. Stahl,
Director, Office of Compliance.
[FR Doc. 05-9082 Filed 5-5-05; 8:45 am]
BILLING CODE 6560-50-P