[Federal Register: May 2, 2005 (Volume 70, Number 83)]
[Notices]
[Page 22707]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr02my05-99]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Employment and Training Administration
[TA-W-56,318 and TA-W-56,318A]
Automatic Lathe Cutterhead, High Point, NC; Industrial Supply
Co., Inc., Subsidiary of Automatic Lathe Cutterhead, Hickory, NC;
Notice of Negative Determination Regarding Application for
Reconsideration
By application of March 11, 2005 a petitioner requested
administrative reconsideration of the Department's negative
determination regarding eligibility for workers and former workers of
the subject firm to apply for Trade Adjustment Assistance (TAA) and
Alternative Trade Adjustment Assistance (ATAA). The denial notice was
signed on February 18, 2005 and published in the Federal Register on
March 9, 2005 (70 FR 11703).
Pursuant to 29 CFR 90.18(c) reconsideration may be granted under
the following circumstances:
(1) If it appears on the basis of facts not previously considered
that the determination complained of was erroneous;
(2) If it appears that the determination complained of was based on
a mistake in the determination of facts not previously considered; or
(3) If in the opinion of the Certifying Officer, a mis-
interpretation of facts or of the law justified reconsideration of the
decision.
The TAA petition, filed on behalf of workers at Automatic Lathe
Cutterhead, High Point, North Carolina (TA-W-56,318) engaged in cutting
bandsaw blades and Industrial Supply CO., Inc., Subsidiary of Automatic
Lathe Cutterhead, Hickory, North Carolina (TA-W-56,318A) engaged in
direct support of the production at Automatic Lathe Cutterhead was
denied because the ``contributed importantly'' group eligibility
requirement of Section 222 of the Trade Act of 1974 was not met. The
``contributed importantly'' test is generally demonstrated through a
survey of the workers' firm's customers. The survey revealed no
increase in imports of bandsaw blades during the relevant period. The
subject firm did not import bandsaw blades in the relevant period nor
did it shift production to a foreign country.
In the request for reconsideration, the petitioner inquires about
the reasoning behind workers of the subject firms being tied to the
production of bandsaw blades and refers to the furniture industry as a
more appropriate activity for the workers of the subject firm.
The original investigation did reveal that both locations,
Automotive Lathe Cutterhead in High Point, North Carolina and
Industrial Supply Company in Hickory, North Carolina act as resale
distributors and workers of these facilities are strictly engaged in
warehousing for suppliers that manufacture furniture. However,
warehousing is not considered production of an article within the
meaning of Section 222 of the Trade Act. Therefore, the subject group
of workers can not be eligible for TAA on its own, based on the fact,
that workers do not produce an article. However, it was also determined
that cutting and welding of bandsaw blades takes place at the Automatic
Lathe Cutterhead Company, High Point, North Carolina facility. Because
it is the only production activity occurring at the subject firm, the
investigation was conducted on bandsaw blades as a relevant product
manufactured by the workers of the subject firm.
The petitioner alleges that the subject firm lost its business due
to the conditions in the furniture industry and its major customers
importing furniture and shifting their production abroad.
In order to establish import impact, the Department must consider
imports that are like or directly competitive with those produced at
the subject firm. The Department conducted a survey of the subject
firm's major declining customers regarding their purchases of bandsaw
blades. The survey revealed that the declining customers did not import
bandsaw blades during the relevant period.
The reconsideration revealed that the original petitions for
Automatic Lathe Cutterhead, High Point, North Carolina and Industrial
Supply Co., Inc., Hickory, North Carolina were filed as secondary
affected firms. Because this fact was not addressed during the original
investigation, an investigation was conducted to determine whether
workers of the subject firms are eligible for trade adjustment
assistance (TAA) based on the secondary upstream supplier impact.
In order to make an affirmative determination and issue a
certification of eligibility to apply for adjustment assistance on the
basis of the workers' firm being a secondary upstream supplier, the
following group eligibility requirements under Section 222(b) must be
met:
(1) A significant number or proportion of the workers in the
workers' firm or an appropriate subdivision of the firm have become
totally or partially separated, or are threatened to become totally or
partially separated;
(2) The workers' firm (or subdivision) is a supplier or downstream
producer to a firm (or subdivision) that employed a group of workers
who received a certification of eligibility to apply for trade
adjustment assistance benefits and such supply or production is related
to the article that was the basis for such certification; and
(3) Either--
(A) The workers' firm is a supplier and the component parts it
supplied for the firm (or subdivision) described in paragraph (2)
accounted for at least 20 percent of the production or sales of the
workers' firm; or
(B) A loss of business by the workers' firm with the firm (or
subdivision) described in paragraph (2) contributed importantly to the
workers' separation or threat of separation.
In this case, however, the subject firms do not act as upstream
suppliers, because bandsaw blades do not form a component part of the
furniture. Thus the subject firm workers are not eligible under
secondary impact.
Conclusion
After review of the application and investigative findings, I
conclude that there has been no error or misinterpretation of the law
or of the facts which would justify reconsideration of the Department
of Labor's prior decision. Accordingly, the application is denied.
Signed at Washington, DC this 19th day of April, 2005.
Elliott S. Kushner,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E5-2077 Filed 4-29-05; 8:45 am]
BILLING CODE 4510-30-P