[Federal Register: May 30, 2008 (Volume 73, Number 105)]
[Notices]
[Page 31108-31113]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr30my08-44]
[[Page 31108]]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2008-0450; FRL-8366-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from April 14, 2008 through May 9, 2008, consists of the PMNs
and TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before June 30, 2008.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2008-0450, by one of the following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2008-0450. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2008-0450. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at http://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
http://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at http://
www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
[[Page 31109]]
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from April 14, 2008 through May 9,
2008, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 62 Premanufacture Notices Received From: 4/14/08 to 5/9/08
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-08-0367 04/11/08 07/09/08 Cytec Industries Inc. (G) Binder resin for (G) Urethane modified
coatings alkyd resin,
neutralized, in
water based solution
P-08-0369 04/14/08 07/12/08 Hexion Specialty (G) Unsaturated (G) Polyester resin
Company polyester resin
P-08-0370 04/14/08 07/12/08 Oji Ilford USA (S) Dye formulated in (G) 1,5-
water-based ink for naphthalenedisulfoni
use in inkjet c acid, 3,3'-
printer cartridges [substituted
heterocycle]bis-,
pentasodium salt
P-08-0371 04/14/08 07/12/08 CBI (G) Fuel additive (G) Xanthene ester
P-08-0372 04/15/08 07/13/08 CBI (S) Resin for (G) Fatty acid
coatings dimers, polymers
with diols, cyclical
diacid, aromatic
polyacid; fatty acid
dimers, polymers
with diols, cyclical
diacid, aromatic
polyacid, compounds
with amine
P-08-0373 04/15/08 07/13/08 CBI (S) Resin for (G) Fatty acid
coatings dimers, polymers
with diols, cyclical
diacid, aromatic
polyacid; Fatty acid
dimers, polymers
with diols, cyclical
diacid, aromatic
polyacid, compounds
with amine
P-08-0374 04/15/08 07/13/08 CBI (S) Resin for (G) Fatty acid
coatings dimers, polymers
with diols, cyclical
diacid, aromatic
polyacid; Fatty acid
dimers, polymers
with diols, cyclical
diacid, aromatic
polyacid, compounds
with amine
P-08-0375 04/15/08 07/13/08 CBI (S) Resin for (G) Fatty acid
coatings dimers, polymers
with diols, cyclical
diacid, aromatic
polyacid; Fatty acid
dimers, polymers
with diols, cyclical
diacid, aromatic
polyacid, compounds
with amine
P-08-0376 04/16/08 07/14/08 CBI (G) Fuel additive (G) Arylalkylamine, N-
[4-[2-
(substitutedaryl)dia
zenyl]aryl]-N-alkyl
P-08-0377 04/17/08 07/15/08 CBI (G) Chemical (G) Monoheterocycle,
intermediate homopolymer, 2-[(2-
methyl-1-oxo-2-
propenyl)oxy]ethyl
ester
P-08-0378 04/17/08 07/15/08 CBI (G) Fuel additive (G) Arylalkylamine,N-
[4-[2-
(substitutedaryl)dia
zenyl]arylamino]
[[Page 31110]]
P-08-0379 04/17/08 07/15/08 Firmenich Inc. (S) Aroma for use in (S) Extractives and
fragrance mixtures, their physically
which in turn are modified derivatives
used in perfumes, amomum tsao-ko,
soaps, cleansers, zingiberaceae. Oils
etc. amomum tsao-ko
P-08-0380 04/18/08 07/16/08 Cytec Industries Inc. (G) Antiscalant (G) Modified
polyethylene polymer
P-08-0381 04/22/08 07/20/08 Firmenich Inc. (S) Aroma for use in (S) Extractives and
fragrance mixtures, their physically
which in turn are modified
used in perfumes, derivatives. Inula
soaps, cleansers, nervosa, asteraceae.
etc. Oils, inula nervosa
P-08-0382 04/22/08 07/20/08 CBI (S) Curing agent for (G) Propenenitrile,
epoxy resin in reaction products
protective coatings with
alkylenediamine,
hydrogenated, N-aryl
derivates
P-08-0383 04/22/08 07/20/08 CBI (G) Open, non- (G) Mixed metal
dispersive use in aluminate
inks, paints,
coatings, plastics
P-08-0384 04/22/08 07/20/08 CBI (G) Film forming aid (G) Vegetable oils,
for paint esters with polyols
formulations
P-08-0385 04/22/08 07/20/08 CBI (G) Additive for ink. (G) Lithium salt of
cyclic disulfonic
acid
P-08-0386 04/22/08 07/20/08 CBI (G) Additive for ink. (G) Sodium salt of
cyclic carboxylic
acid
P-08-0387 04/22/08 07/20/08 CBI (G) Additive for ink. (G) Lithium salt of
cyclic carboxylic
acid
P-08-0388 04/24/08 07/22/08 Huntsman (G) Reactant used in (G) Substituted
International, LLC. manufacture of mineral acid
another chemical
substance
P-08-0389 04/24/08 07/22/08 Firmenich Inc. (S) Aroma for use in (S) Honey,
fragrance mixtures, desaccharided
which in turn are
used in perfumes,
soaps, cleansers,
etc.
P-08-0390 04/24/08 07/22/08 CBI (G) Concrete additive (G) Acrylate polymer
with vinyl ether
P-08-0391 04/24/08 07/22/08 CBI (G) Surfactant for (G) Alkyl lactyl
pet care, hard lactate
surface cleaner, and
liquid dish soaps
applications;
solvent for
industrial cleaning
applications
P-08-0392 04/23/08 07/21/08 CBI (G) Antistatic, (G) Carbon
reinforcement nanomaterial
additive
P-08-0393 04/25/08 07/23/08 CBI (G) Surface treatment (G) Urethane resin
P-08-0394 04/28/08 07/26/08 DIC International (G) Polymer binder (G) Dodecanedioic
(USA), LLC. component in printer acid polymer with
toners nonanediol
P-08-0395 04/28/08 07/26/08 CBI USA (S) Binder for wood (G) Copolymer of
coatings acrylic and
methylacrylic esters
P-08-0396 04/28/08 07/26/08 Mane, USA (G) Perfumery (S) 2H pyran-2-one,
ingredient tetrahydro-5-pentyl
P-08-0397 04/29/08 07/27/08 CBI (G) Additive for (S) 2,4'-
consumer use dimethylpropiophenon
products; dispersive e
use
P-08-0398 04/30/08 07/28/08 The Sherwin-Williams (G) Open, non- (G) NPG type
Company dispersive use polyester polyol
P-08-0399 05/01/08 07/29/08 Mane, USA (G) Perfumery (S) 1-(2,3-dimethyl-
ingredient bicyclo[2.2.1]heptan
)-ethanone
P-08-0400 05/01/08 07/29/08 CBI (G) Additive, open, (G) Polyalcohol
non-dispersive use modified
polydimethylsiloxane
P-08-0401 05/01/08 07/29/08 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified fatty acid
dimer
P-08-0402 05/02/08 07/30/08 Firmenich Inc. (S) Aroma for use in (S) Extractives and
fragrance mixtures, their physically
which in turn are modified
used in perfumes, derivatives. citrus
soaps, cleansers, hystrix. Oils citrus
etc. hystrix
P-08-0403 05/02/08 07/30/08 Firmenich Inc. (S) Aroma for use in (S) Extractives and
fragrance mixtures, their physically
which in turn are modified
used in perfumes, derivatives.
soaps, cleansers, kaempferia galanga.
etc. Oils, kaempferia
galanga
P-08-0404 05/02/08 07/30/08 CBI (G) Component of (G) Alkenoic acid
industrial use polymer with
coating (poly)hydroxy
substituted alkane
P-08-0405 05/02/08 07/30/08 CBI (G) Component of (G) Alkenoic acid
industrial use polymer with
coating (poly)hydroxy
substituted alkane
P-08-0406 05/02/08 07/30/08 CBI (G) Component of (G) Alkenoic acid
industrial use polymer with
coating (poly)hydroxy
substituted alkane
P-08-0407 05/05/08 08/02/08 Shin-etsu Silicones (G) Additive of (G) Vinyl siloxane
of America Inc. molding compound for polymer with
semiconductor use to hydrogen siloxane
improve shock
resistance.
P-08-0408 05/01/08 07/29/08 Robertet, Inc. (S) As an odoriferous (S) Extractives and
component of their physically
fragrance compounds modified
derivatives.
dalbergia
cochinchinensis.
Oils dalbergia
cochinchinensis
[[Page 31111]]
P-08-0409 05/05/08 08/02/08 CBI (G) Pipeline additive (G) Alpha-alkenes,
C20 24 .alpha.-
,polymers with
maleic anhydride,
C16 30alkyl esters
P-08-0410 05/02/08 07/30/08 Dic International (G) Polymer binder (G) Glycidyl
(USA), LLC. for coatings methacrylate alkyl
(meth) acrylate
copolymer
P-08-0411 05/05/08 08/02/08 CBI (G) Scale inhibitor (G) Carbohydrate
for subterranean polymer with 2,5-
oilfield brines furandione and 2-
propenoic acid,
sodium salt,
hydrogen peroxide-
and peroxydisulfuric
acid
([(ho)s(o)2]202)
sodium salt (1:2)-
initiated
P-08-0412 05/05/08 08/02/08 CBI (G) Scale inhibitor (G) Carbohydrate
for subterranean polymer with 2,5-
oilfield brines furandione and 2-
propenoic acid,
ammonium salt,
hydrogen peroxide-
and peroxydisulfuric
acid
([(ho)s(o)2]202)
sodium salt (1:2)-
initiated
P-08-0413 05/05/08 08/02/08 CBI (G) Scale inhibitor (G) Carbohydrate
for subterranean polymer with 2,5-
oilfield brines furandione, methyl 2-
methyl-2-propenoate,
2-propenoic acid,
sodium 4-
ethenylbenzenesulfon
ate (1:1) and sodium
2-methyl-2-[(1-oxo-2-
propen-1-yl)amino]-1-
propanesulfonate
(1:1), sodium salt,
hydrogen peroxide-
and peroxydisulfuric
acid
([(ho)s(o)2]202)
sodium salt (1:2)-
initiated
P-08-0414 05/05/08 08/02/08 CBI (G) Scale inhibitor (G) Carbohydrate
for subterranean polymer with 2,5-
oilfield brines furandione, methyl 2-
methyl-2-propenoate,
2-propenoic acid,
sodium 4-
ethenylbenzenesulfon
ate (1:1) and sodium
2-methyl-2-[(1-oxo-2-
propen-1-yl)amino]-1-
propanesulfonate
(1:1), ammonium
salt, hydrogen
peroxide- and
peroxydisulfuric
acid
([(ho)s(o)2]202)
sodium salt (1:2)-
initiated
P-08-0415 05/05/08 08/02/08 CBI (G) Scale inhibitor (G) Carbonhydrate
for subterranean polymer with 1-
oilfield brines methyl hydrogen (2z)-
2-butenedioate, 1,2-
propanediol mono(2-
methyl-2-propenoate)
and 2-propenoic
acid, sodium salt,
tert-bu
hydroperoxide-
initiated
P-08-0416 05/05/08 08/02/08 CBI (G) Scale inhibitor (G) Carbonhydrate
for subterranean polymer with 1-
oilfield brines methyl hydrogen (2z)-
2-butenedioate, 1,2-
propanediol mono(2-
methyl-2-propenoate)
and 2-propenoic
acid, ammonium salt,
tert-bu
hydroperoxide-
initiated
P-08-0417 05/06/08 08/03/08 Firmenich Inc. (S) Aroma for use in (S) Extractives and
fragrance mixtures, their physically
which in turn are modified
used in perfumes, derivatives.
soaps, cleansers, fortunella
etc. margarita. Oils,
kumpquat, fortunella
margarita
P-08-0418 05/07/08 08/04/08 CBI (G) Cleaner/degreaser (S) Quaternary
ammonium compounds,
coco
alkyl(hydroxyethyl)d
imethyl,
ethoxylated,
chlorides
P-08-0419 05/07/08 08/04/08 CBI (S) Component in (G) Aromatic
industrial flooring dimethaneamine,
applications; reaction products
component in with aromatic
industrial paint glycidlyl ether
primer
P-08-0420 05/08/08 08/05/08 Huntsman (S) Exhaust dyeing of (G) Substituted
International, LLC. polyester benzofuranone dye
P-08-0421 05/08/08 08/05/08 CBI (G) Component of (G) Acrylic resin
photoresist
P-08-0422 05/09/08 08/06/08 CBI (G) Additive, open, (G) Potassium
non-dispersive use polystyrene maleate
P-08-0423 05/09/08 08/06/08 CBI (G) Additive, open, (G) Poly(styrene-
non-dispersive use methacryloyloxyethyl
phosphoric acid
ester)
[[Page 31112]]
P-08-0424 05/06/08 08/03/08 Sasol North America (S) Sulfation (S) Alcohols, C12 13-
branched and linear,
propoxylated
P-08-0425 05/06/08 08/03/08 Sasol North America (S) Sulfation (S) Alcohols, C14 15-
branched and linear,
propoxylated
P-08-0426 05/06/08 08/03/08 Sasol North America (S) Sulfation (S) Alcohols, C16 17-
branched and linear,
propoxylated
P-08-0427 05/06/08 08/03/08 Sasol North America (S) Enhanced (S) Poly[oxy(methyl-
hydrocarbon recovery 1,2-ethanediyl)],
.alpha.-sulfo-
.omega.-hydroxy-,
C12-C13-branched and
linear alkyl ethers,
sodium salts
P-08-0428 05/06/08 08/03/08 Sasol North America (S) Enhanced (S) Poly[oxy(methyl-
hydrocarbon recovery 1,2-ethanediyl)],
.alpha.-sulfo-
.omega.-hydroxy-,
C14-C15-branched and
linear alkyl ethers,
sodium salts
P-08-0429 05/06/08 08/03/08 Sasol North America (S) Enhanced (S) Poly[oxy(methyl-
hydrocarbon recovery 1,2-ethanediyl)],
.alpha.-sulfo-
.omega.-hydroxy-,
C16-C17-branched and
linear alkyl ethers,
sodium salts
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 1 Test Marketing Exemption Notices Received From: 4/14/08 to 5/9/08
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-08-0009 04/29/08 06/12/08 CBI (G) Colored coatings (G) Reaction product
and related vehicles produced of fatty
acids and hydroxy
acids
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 26 Notices of Commencement From: 4/14/08 to 5/9/08
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-01-0455 04/28/08 04/24/08 (S) Ferric acetate
P-05-0104 04/23/08 04/02/08 (G) Polyurethane
prepolymer
P-05-0550 04/22/08 04/21/08 (G) Acrylic ester
copolymer
P-05-0755 04/21/08 04/09/08 (G) Isocyanate functional
polyester urethane
polymer
P-07-0017 04/28/08 04/02/08 (G) Aminoalkoxysiloxane,
acetates (salts)
P-07-0230 04/17/08 04/10/08 (G) Polymeric
diphenylmethane
diisocyanate prepolymer
P-07-0233 04/22/08 04/16/08 (G) Polyurethane acrylate
resin
P-07-0362 04/14/08 03/28/08 (G) Butylene
phthalate(poly-1,3-
propyleneoxide) phthalate
copolymer
P-07-0422 05/09/08 04/09/08 (G) Phenol, 4,4'-(1-
methylethylidene)bis-,
polymer with 2-
(chloromethyl)oxirane and
a polyol, reaction
products with 5-amino-
1,3,3-
trimethylcyclohexanemetha
namine derivatives, an
aromatic alkyl amine and
an alkyl amine
P-07-0528 04/28/08 04/16/08 (G) Acrylated polyurethane
P-07-0558 04/28/08 04/16/08 (G) Acrylated polyester
urethane
P-07-0653 04/29/08 04/25/08 (G) Ethoxylated
methylphosphonic acid
P-07-0698 04/18/08 04/15/08 (G) Polyester acrylate
P-08-0025 04/23/08 04/07/08 (S) Formamide, N-ethenyl-,
homopolymer, hydrolyzed,
N-(3-carboxy-1-oxopropyl)
N-[2-hydroxy-3-
(trimethylammonio)propyl]
derivates, chlorides
P-08-0072 04/23/08 04/08/08 (G) Poly
(methacryloyloxyalkyl
trialkylammonium salt)
P-08-0107 04/23/08 03/27/08 (G) Alkoxy silane
P-08-0128 04/25/08 04/22/08 (G) Neopentylglycol
dialkanoate
P-08-0129 04/15/08 04/09/08 (G) Acrylic, vinyl and
methacrylic copolymer,
quaternary salt with aryl
sulfonate
P-08-0143 05/05/08 04/26/08 (G) Alkoxylated linear
alcohol
P-08-0147 05/02/08 04/11/08 (G) Modified polycarbonate
P-08-0153 04/29/08 04/02/08 (G) Polymer of fatty acids
methyl esters
hydroformylation
products, hydrogenated,
with alkylene oxides
[[Page 31113]]
P-08-0160 04/29/08 04/16/08 (G) Aryloxyalcohol
P-08-0161 04/29/08 04/14/08 (G) Aryloxyacrylate
P-08-0162 05/05/08 04/25/08 (G) Fatty acid derivative
P-08-0169 04/17/08 04/15/08 (G) Aromatic
polyisocyanate, glycol
ethers-blocked
P-92-0746 05/06/08 04/04/08 (G) Organic stearate salt
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: May 21, 2008.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E8-12143 Filed 5-29-08; 8:45 am]
BILLING CODE 6560-50-S