[Federal Register: January 25, 2008 (Volume 73, Number 17)]
[
Notices]               
[Page 4544]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr25ja08-50]                         


[[Page 4544]]

-----------------------------------------------------------------------

DEPARTMENT OF DEFENSE

Department of the Army; Corps of Engineers

 
Notice of Intent To Grant Partially Exclusive License of U.S. 
Patent Application No. 11/82,432 Entitled ``A Method and System for 
Treating Metal-Containing Fluid Emissions'' and U.S. Patent Application 
No. 10/931,232 ``Perlite Sorbents for Vapor Phase Metals and Metals 
Compounds''

AGENCY: Department of the Army, U.S. Army Corps of Engineers, DOD.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In accordance with 37 CFR 404.7(a)(1)(i), announcement is made 
of a prospective partially exclusive license for specific applications 
of small ammunition destruction, soil remediation from contaminants, 
and Municipal Solid Waste (MSW) recycling (converting waste products 
into reusable materials) in worldwide markets.

DATES: Written objections must be filed not later than 15 days 
following publication of this announcement.

ADDRESSES: United States Army Corps of Engineers Research and 
Development Center, Office of Technology Transfer and Outreach, ATTN: 
CEERD-OT (Ms. Bea Shahin), 2902 Newmark Drive, Champaign, IL 61822-
1076.

FOR FURTHER INFORMATION CONTACT: Ms. Bea Shahin, (217) 373-7234, Fax 
(217) 373-7210; Internet Bea.S.Shahin@usace.army.mil.

SUPPLEMENTARY INFORMATION: Emissions from military deactivation 
furnaces contain toxic metal vapors and particulates at high 
temperatures reaching 1200 [deg]F. Based on the speciation studies 
conducted by U.S. Army Engineer Research and Development Center, 
Construction Engineering Research Laboratory (ERDC-CERL) on emissions 
from deactivation furnaces, lead, cadmium, antimony and other metals 
released are in two phases as solid particulates and vapor phase. It is 
also observed that nearly 97% of the metals are in particulate form. 
Thus if we can capture the solid particulates, the metals emissions 
would be significantly reduced. However, it is necessary to capture the 
vapor phase metal compounds also to reduce the total emissions well 
below the National Emissions Standards for Hazardous Air Pollutants 
(NESHAP) standards. Thus ERDC-CERL has developed an emissions control 
system, Integrated Metal Emissions Control System (IMECS\TM\) to 
capture the particulates and the vapor phase metal compounds. The two 
patents involved here describe capturing particulate emissions as well 
as vapor phase toxic/hazardous compounds from combustion processes. The 
technology involves Steel Screen Particulate (SSP) Filter System that 
is capable of capturing the particulate material (including 
PM2.5) followed by a Perlite Based Sorbent (PBS) fixed bed 
system. The IMECS\TM\ can be operated at high temperatures and can 
significantly remove large quantities of lead and other metal 
compounds. The IMECS\TM\ is compact and can be sized conveniently and 
integrated with mobile and stationary incinerator systems alike. 
Emissions of volatile and semi-volatile metal particulates as well as 
select organics may be captured from deactivation furnaces, solid waste 
incinerators, can be cost effectively controlled with the IMECS.\TM\

Brenda S. Bowen,
Army Federal Register Liaison Officer.
 [FR Doc. E8-1308 Filed 1-24-08; 8:45 am]

BILLING CODE 3710-92-P