[Federal Register: October 20, 2008 (Volume 73, Number 203)]
[Rules and Regulations]
[Page 62187-62189]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr20oc08-1]
========================================================================
Rules and Regulations
Federal Register
________________________________________________________________________
This section of the FEDERAL REGISTER contains regulatory documents
having general applicability and legal effect, most of which are keyed
to and codified in the Code of Federal Regulations, which is published
under 50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by the Superintendent of Documents.
Prices of new books are listed in the first FEDERAL REGISTER issue of each
week.
========================================================================
[[Page 62187]]
CONSUMER PRODUCT SAFETY COMMISSION
16 CFR Part 1610
Standard for the Flammability of Clothing Textiles; Corrections
AGENCY: Consumer Product Safety Commission.
ACTION: Correcting amendments.
-----------------------------------------------------------------------
SUMMARY: The U.S. Consumer Product Safety Commission published in the
Federal Register of March 25, 2008, a final rule amending its
flammability standard for general wearing apparel, the Standard for the
Flammability of Clothing Textiles, 16 CFR Part 1610. The published rule
contained some incorrect typographical symbols and other inadvertent
errors. This document corrects those symbols and errors.
DATES: Effective on October 20, 2008.
FOR FURTHER INFORMATION CONTACT: Mary Toro, Directorate for Compliance
and Field Operations, Consumer Product Safety Commission, 4330 East
West Highway, Bethesda, Maryland 20814-4408; telephone (301) 504-7586;
e-mail mtoro@cpsc.gov.
SUPPLEMENTARY INFORMATION: The U.S. Consumer Product Safety Commission
published in the Federal Register of March 25, 2008, (73 FR 15636) an
amendment to the Standard for the Flammability of Clothing Textiles, 16
CFR Part 1610. As published, the rule contained some incorrect
typographical symbols and inadvertent technical errors in the text and
drawings. This document corrects those symbols and errors.
List of Subjects in 16 CFR part 1610
Clothing, Consumer protection, Flammable materials, Incorporation
by reference, Reporting and recordkeeping requirements, Textiles,
Warranties.
0
Accordingly, 16 CFR part 1610 is corrected by making the following
correcting amendments:
PART 1610--STANDARD FOR THE FLAMMABILITY OF CLOTHING TEXTILES
0
1. The authority citation for part 1610 continues to read as follows:
Authority: 15 U.S.C. 1191-1204.
0
2. Revise the last sentence of paragraph (a)(1)(vii) of Sec. 1610.5 to
read as follows:
Sec. 1610.5 Test apparatus and materials.
(a) * * *
(1) * * *
(vii) * * * The weight shall be 30g 5g (1.16 oz.
0.18 oz).
* * * * *
0
3. Amend Sec. 1610.6 as follows:
0
a. In paragraph (a)(3)(v) remove the word ``dessicant'' and add, in its
place ``desiccant''.
0
b. Revise paragraph (b)(1)(ii) to read as follows:
Sec. 1610.6 Test procedure.
* * * * *
(b) * * *
(1) * * *
(ii) Laundering procedure. The sample, after being subjected to the
dry cleaning procedure, shall be washed and dried one time in
accordance with sections 8.2.2, 8.2.3 and 8.3.1(A) of AATCC Test Method
124-2006 ``Appearance of Fabrics after Repeated Home Laundering''
(incorporated by reference at Sec. 1610.6(b)(1)(B)(iii)). Washing
shall be performed in accordance with sections 8.2.2 and 8.2.3 of AATCC
Test Method 124-2006 using AATCC 1993 Standard Reference Detergent,
powder and wash water temperature (IV) (120[deg] 5 [deg]F;
49[deg] 3 [deg]C) specified in Table II of that method,
and the water level, agitator speed, washing time, spin speed and final
spin cycle specified for ``Normal/Cotton Sturdy'' in Table III of that
method. A maximum wash load shall be 8 pounds (3.63 kg) and may consist
of any combination of test samples and dummy pieces. Drying shall be
performed in accordance with section 8.3.1(A) of that test method,
Tumble Dry, using the exhaust temperature (150[deg] 10
[deg]F; 66[deg] 5 [deg]C) and cool down time of 10 minutes
specified in the ``Durable Press'' conditions of Table IV.
* * * * *
[[Page 62188]]
0
3. Revise Figure 6 to Part 1610 as follows:
Figure 6 to Part 1610 An Example of a Typical Igniter
BILLING CODE 6355-01-P
[GRAPHIC] [TIFF OMITTED] TR20OC08.001
[[Page 62189]]
0
4. Revise Figure 9 to Part 1610 as follows:
Figure 9 to Part 1610 An Example of a Typical Brushing Device Template
[GRAPHIC] [TIFF OMITTED] TR20OC08.002
Dated: October 10, 2008.
Todd A. Stevenson,
Secretary, Consumer Product Safety Commission.
[FR Doc. E8-24712 Filed 10-17-08; 8:45 am]
BILLING CODE 6355-01-C