[Federal Register: September 3, 2009 (Volume 74, Number 170)]
[Notices]
[Page 45654-45655]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr03se09-74]
-----------------------------------------------------------------------
NUCLEAR REGULATORY COMMISSION
[NRC-2009-0384]
Draft Regulatory Guide: Issuance, Availability
AGENCY: Nuclear Regulatory Commission.
ACTION: Notice of Issuance and Availability of Draft Regulatory Guide,
DG-1150, Qualification of Continuous Duty Safety-Related Motors for
Nuclear Power Plants.
-----------------------------------------------------------------------
FOR FURTHER INFORMATION CONTACT: Satish Aggarwal, U.S. Nuclear
Regulatory Commission, Washington, DC 20555-0001, telephone: (301) 251-
7627, e-mail: Satish.Aggarwal@nrc.gov, or R.A. Jervey, telephone: (301)
251-7404, e-mail: raj@nrc.gov
SUPPLEMENTARY INFORMATION:
I. Introduction
The U.S. Nuclear Regulatory Commission (NRC) is issuing for public
comment a draft guide in the agency's ``Regulatory Guide'' series. This
series was developed to describe and make available to the public such
information as methods that are acceptable to the NRC staff for
implementing specific parts of the NRC's regulations, techniques that
the staff uses in evaluating specific problems or postulated accidents,
and data that the staff needs in its review of applications for permits
and licenses.
The draft regulatory guide (DG), entitled, ``Qualification of
Continuous Duty Safety-Related Motors for Nuclear Power Plants,'' is
temporarily identified by its task number, DG-1150, which should be
mentioned in all related correspondence. DG-1150 is proposed Revision 1
of Regulatory Guide 1.40, dated March 1973.
This regulatory guide describes a method that the staff of the NRC
deems acceptable for complying with the Commission's regulations for
qualification of continuous duty safety-related motors for nuclear
power plants.
The Commission's regulations in Title 10, Part 50, ``Domestic
Licensing of Production and Utilization Facilities,'' of the Code of
Federal Regulations (10 CFR part 50), require that structures, systems,
and components in a nuclear power plant that are important to safety be
designed to accommodate the effects of environmental conditions (i.e.,
they must remain functional under postulated design-basis events).
Toward that end, General Design Criteria 1, 2, 4, and 23 of Appendix A,
``General Design Criteria for Nuclear Power Plants,'' to 10 CFR part 50
contain the general requirements. Augmenting those general requirements
are the specific requirements pertaining to qualification of certain
electrical equipment important to safety that appear in 10 CFR 50.49,
``Environmental Qualification of Electric Equipment Important to Safety
for Nuclear Power Plants.'' In addition, Criterion III, ``Design
Control,'' of Appendix B, ``Quality Assurance Criteria for Nuclear
Power Plants and Fuel Reprocessing Plants,'' to 10 CFR part 50,
requires that test programs, when used to verify the adequacy of a
specific design feature, should include suitable qualification testing
of a prototype unit under the most adverse design conditions.
II. Further Information
The NRC staff is soliciting comments on DG-1150. Comments may be
accompanied by relevant information or supporting data and should
mention DG-1150 in the subject line. Comments submitted in writing or
in electronic form will be made available to the public in their
entirety through the NRC's Agencywide Documents Access and Management
System (ADAMS). Requests for technical information about DG-1150 may be
directed to the NRC contact, Satish Aggarwal at (301) 251-7627 or e-
mail to Satish.Aggarwal@nrc.gov.
Because your comments will not be edited to remove any identifying
or contact information, the NRC cautions you against including any
information in your submission that you do not want to be publicly
disclosed.
The NRC requests that any party soliciting or aggregating comments
received from other persons for submission to the NRC inform those
persons that the NRC will not edit their comments to remove any
identifying or contact information, and therefore, they should not
include any information in their comments that they do not want
publicly disclosed. You may submit comments by any of the following
methods:
1. Mail comments to: Rulemaking and Directives Branch, Mail Stop:
TWB-05-B01M, Office of Administration, U.S. Nuclear Regulatory
Commission, Washington, DC 20555-0001.
2. Federal e-Rulemaking Portal: Go to http://www.regulations.gov
and search for documents filed under Docket ID [NRC-2009-0384]. Address
questions about NRC dockets to Carol Gallagher, 301-492-3668; e-mail
Carol.Gallagher@nrc.gov.
3. Fax comments to: Rulemaking and Directives Branch, Office of
[[Page 45655]]
Administration, U.S. Nuclear Regulatory Commission at (301) 492-3446.
Comments would be most helpful if received by October 30, 2009.
Comments received after that date will be considered if it is practical
to do so, but the NRC is able to ensure consideration only for comments
received on or before this date. Although a time limit is given,
comments and suggestions in connection with items for inclusion in
guides currently being developed or improvements in all published
guides are encouraged at any time.
Electronic copies of DG-1150 are available through the NRC's public
Web site under Draft Regulatory Guides in the ``Regulatory Guides''
collection of the NRC's Electronic Reading Room at http://www.nrc.gov/
reading-rm/doc-collections/. Electronic copies are also available in
ADAMS (http://www.nrc.gov/reading-rm/adams.html ), under Accession No.
ML091200454.
In addition, regulatory guides are available for inspection at the
NRC's Public Document Room (PDR) located at 11555 Rockville Pike,
Rockville, Maryland. The PDR's mailing address is USNRC PDR,
Washington, DC 20555-0001. The PDR can also be reached by telephone at
(301) 415-4737 or (800) 397-4205, by fax at (301) 415-3548, and by e-
mail to pdr.resource@nrc.gov.
Regulatory guides are not copyrighted, and Commission approval is
not required to reproduce them.
Dated at Rockville, Maryland, this 24 day of August 2009.
For the Nuclear Regulatory Commission.
Andrea D. Valentin,
Chief, Regulatory Guide Development Branch, Division of Engineering,
Office of Nuclear Regulatory Research.
[FR Doc. E9-21279 Filed 9-2-09; 8:45 am]
BILLING CODE 7590-01-P