[Federal Register Volume 74, Number 246 (Thursday, December 24, 2009)]
[Rules and Regulations]
[Pages 68383-68384]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E9-30296]
[[Page 68383]]
-----------------------------------------------------------------------
DEPARTMENT OF DEFENSE
Defense Acquisition Regulations System
48 CFR Parts 225 and 252
RIN 0750-AF22
Defense Federal Acquisition Regulation Supplement; Definitions of
Component and Domestic Manufacture (DFARS Case 2005-D010)
AGENCY: Defense Acquisition Regulations System, Department of Defense
(DoD).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: DoD is issuing this final rule to amend the Defense Federal
Acquisition Regulation Supplement (DFARS) to clarify the definitions of
``component'' and ``domestic manufacture'' as they relate to policy on
foreign acquisition.
DATES: Effective date: December 24, 2009.
FOR FURTHER INFORMATION CONTACT: Ms. Amy Williams, Defense Acquisition
Regulations System, OUSD(AT&L)DPAP(DARS), IMD 3D139, 3062 Defense
Pentagon, Washington, DC 20301-3062. Telephone 703-602-0328; facsimile
703-602-7887. Please cite DFARS Case 2005-D010.
SUPPLEMENTARY INFORMATION:
A. Background
DoD published a proposed rule at 71 FR 18695 on April 12, 2006. We
did not receive any public comments. Therefore, DoD has issued a final
rule with only a minor editorial correction and an update of the
baseline.
This final rule amends DFARS Part 225 and associated provisions and
clauses to clarify the distinction between foreign acquisition policies
that apply only to top-level components of end products and those that
apply to both top-level and lower-tier components of end products. As
used in this background discussion, ``top-level components'' are those
components that are incorporated directly into the end product; and
``lower-tier components'' are components that are incorporated into a
component of the end product.
The general definition of ``component'' in FAR 2.101 is ``any item
supplied to the Government as part of an end item or of another
component.'' Therefore, for general use, the term includes both top-
level components and lower-tier components. For purposes of determining
whether a product is a domestic end product under the Buy American Act
or the Balance of Payments Program, the term ``component'' is defined
in FAR 25.003 to include only ``an article, material, or supply
incorporated directly into an end product or construction material''
(i.e., only top-level components). This definition would also be
applicable to any other situation in which evaluation of the end
product is based on the value of the components, similar to that under
the Buy American Act (e.g., to determine a qualifying country end
product or whether anchor chain is a domestic end product).
In broadly applying these concepts to DFARS Part 225, ``component''
has been defined to apply only to top-level components, except in
Subpart 225.70, where the term ``component'' includes components at all
tiers. However, there are some requirements of Part 225 other than
those in 225.70 that are not based on or are not similar to the Buy
American Act, and there are some requirements in 225.70 that should be
treated as similar to the Buy American Act.
Therefore, the definitions of ``component'' included in the final
rule reflect the correct applicability of foreign acquisition policies
as follows:
[cir] 225.900-70 and 252.225-7013, Duty-Free Entry. Duty-free entry
is not related to evaluation of domestic products under the Buy
American Act and should apply to qualifying country components at any
tier.
[cir] 252.225-7019, Restriction on Anchor and Mooring Chain--The
requirement that the cost of components manufactured in the United
States exceed 50 percent of the total cost of components is similar to
the Buy American Act component test, in which only top-level components
are considered. Therefore, the definition restricting application to
top-level components should apply.
[cir] 252.225-7025, Restriction on Acquisition of Forgings--The
requirement to acquire forging items that are of domestic manufacture
is not related to evaluation of domestic products under the Buy
American Act and should apply to components at any tier.
In addition, the rule eliminates references to the DoD Industrial
Preparedness Production Planning Program, at 225.7005-1 and in the
definition of ``domestic manufacture'' at 252.225-7025, since DoD no
longer has an Industrial Preparedness Production Planning Program.
This rule was subject to Office of Management and Budget review
under Executive Order 12866, dated September 30, 1993.
B. Regulatory Flexibility Act
DoD certifies that this rule will not have a significant economic
impact on a substantial number of small entities within the meaning of
the Regulatory Flexibility Act, 5 U.S.C. 601, et seq., because the rule
updates and clarifies DFARS terminology, but makes no significant
change to DoD acquisition policy. DoD did not receive any comments on
regulatory flexibility and impact of the rule on small business
entities.
C. Paperwork Reduction Act
The Paperwork Reduction Act does not apply, because the rule does
not impose any information collection requirements that require the
approval of the Office of Management and Budget under 44 U.S.C. 3501,
et seq.
List of Subjects in 48 CFR Parts 225, 236, and 252
Government procurement.
Amy G. Williams,
Editor, Defense Acquisition Regulation System.
0
Therefore, 48 CFR parts 225 and 252 are amended as follows:
0
1. The authority citation for 48 CFR parts 225 and 252 continues to
read as follows:
Authority: 41 U.S.C. 421 and 48 CFR Chapter 1.
PART 225--FOREIGN ACQUISITION
0
2. Section 225.900-70 is added to read as follows:
225.900-70 Definition.
``Component,'' as used in this subpart, means any item supplied to
the Government as part of an end product or of another component.
0
3. Section 225.7001 is amended by revising paragraph (b); by
redesignating paragraphs (c) and (d) as paragraphs (d) and (e)
respectively; and by adding a new paragraph (c) to read as follows:
225.7001 Definitions.
* * * * *
(b) ``Component'' is defined in the clauses at 252.225-7009,
Restriction on Acquisition of Certain Articles Containing Specialty
Metals; 252.225-7012, Preference for Certain Domestic Commodities, and
252.225-7016, Restriction on Acquisition of Ball and Roller Bearings,
except that for use in 225.7007, the term has the meaning given in the
clause at 252.225-7019, Restriction on Acquisition of Anchor and
Mooring Chain.
[[Page 68384]]
(c) ``End product'' is defined in the clause at 252.225-7012,
Preference for Certain Domestic Commodities.
* * * * *
0
4. Section 225.7005-1 is revised to read as follows:
225.7005-1 Restriction.
In accordance with 10 U.S.C. 2534, do not acquire chemical weapons
antidote contained in automatic injectors, or the components for such
injectors, unless the chemical weapons antidote or component is
manufactured in the United States or Canada by a company that--
(a) Has received all required regulatory approvals; and
(b) Has the plant, equipment, and personnel to perform the contract
in the United States or Canada at the time of contract award.
0
5. Section 225.7101 is revised to read as follows:
225.7101 Definitions.
``Component'' and ``domestic manufacture,'' as used in this
subpart, are defined in the clause at 252.225-7025, Restriction on
Acquisition of Forgings.
PART 252--SOLICITATION PROVISIONS AND CONTRACT CLAUSES
0
6. Section 252.225-7000 is amended by revising the clause date and
paragraph (a) to read as follows:
252.225-7000 Buy American Act--Balance of Payments Program
Certificate.
* * * * *
Buy American Act--Balance of Payments Program Certificate (DEC 2009)
(a) Definitions. ``Commercially available off-the-shelf (COTS)
item,'' ``component,'' ``domestic end product,'' ``foreign end
product,'' ``qualifying country,'' ``qualifying country end product,''
and ``United States'' have the meanings given in the Buy American Act
and Balance of Payments Program clause of this solicitation.
* * * * *
0
7. Section 252.225-7013 is amended by:
0
a. Revising the clause date;
0
b. Redesignating paragraphs (a)(1) through (3) as paragraphs (a)(2)
through (4) respectively; and
0
c. Adding a new paragraph (a)(1) to read as follows:
252.225-7013 Duty-Free Entry.
* * * * *
Duty-Free Entry (DEC 2009)
(a) * * *
(1) ``Component'' means any item supplied to the Government as part
of an end product or of another component.
* * * * *
0
8. Section 252.225-7019 is amended by:
0
a. Revising the clause date;
0
b. Redesignating paragraphs (a) through (c) as paragraphs (b) through
(d) respectively;
0
c. Adding a new paragraph (a);
0
d. Amending newly designated paragraph (c) by removing ``paragraph (a)
of this clause'' and by adding ``paragraph (b) of this clause'' in its
place; and
0
e. Revising newly designated paragraph (d) to read as follows:
252.225-7019 Restriction on Acquisition of Anchor and Mooring Chain.
* * * * *
Restriction on Acquisition of Anchor and Mooring Chain (DEC 2009)
(a) Definition.
``Component,'' as used in this clause, means an article, material,
or supply incorporated directly into an end product.
* * * * *
(d) The Contractor shall insert the substance of this clause,
including this paragraph (d), in all subcontracts for items containing
welded shipboard anchor and mooring chain, four inches or less in
diameter.
0
9. Section 252.225-7025 is amended by:
0
a. Revising the clause date;
0
b. Redesignating paragraphs (a)(1) and (2) as paragraphs (a)(2) and (3)
respectively;
0
c. Adding a new paragraph (a)(1); and
0
d. Revising newly designated paragraph (a)(2) and paragraph (b) to read
as follows:
252.225-7025 Restriction on Acquisition of Forgings.
* * * * *
Restriction on Acquisition of Forgings (DEC 2009)
(a) * * *
(1) Component means any item supplied to the Government as part of
an end product or of another component.
(2) Domestic manufacture means manufactured in the United States,
its outlying areas, or Canada.
* * * * *
(b) End products and their components delivered under this contract
shall contain forging items that are of domestic manufacture only.
* * * * *
0
10. Section 252.225-7035 is amended by revising the clause date and
paragraph (a) to read as follows:
252.225-7035 Buy American Act--Free Trade Agreements--Balance of
Payments Program Certificate.
* * * * *
Buy American Act--Free Trade Agreements--Balance of Payments Program
Certificate (DEC 2009)
(a) Definitions. ``Bahrainian end product,'' ``commercially
available off-the-shelf (COTS) item,'' ``component,'' ``domestic end
product,'' ``Free Trade Agreement country,'' ``Free Trade Agreement
country end product,'' ``foreign end product,'' ``Moroccan end
product,'' ``qualifying country end product,'' and ``United States,''
as used in this provision, have the meanings given in the Buy American
Act--Free Trade Agreements--Balance of Payments Program clause of this
solicitation.
* * * * *
[FR Doc. E9-30296 Filed 12-23-09; 8:45 am]
BILLING CODE 5001-08-P