[Federal Register Volume 75, Number 92 (Thursday, May 13, 2010)]
[Notices]
[Page 27004]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-11448]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Mine Safety and Health Administration


Petitions for Modification

    This notice amends the petition for modification submitted by Lone 
Mountain Processing, Inc., on July 15, 2009, (Docket Number M-2009-024-
C). The amendment assigns a separate docket number for each of the 
mines listed. Lone Mountain Processing, Inc., filed a petition for 
modification of existing standard 30 CFR 75.503 (Permissible electric 
face equipment; maintenance) and 30 CFR 18.35 (Portable trailing cables 
and cords) for the Clover Fork No. 1 Mine, (MSHA I.D. No. 15-18647), 
Huff Creek No. 1 Mine (MSHA I.D. No. 15-17234), and Darby Fork No. 1 
Mine, MSHA I.D. No. 15-02263). MSHA published the notice in the Federal 
Register on December 21, 2009 (74 FR 67915). Initially, this petition 
for modification was assigned one docket number. After investigating 
these mines it has been determined that the conditions at the mines are 
different and a separate decision and order will be issued for each 
mine. This requires having separate docket numbers for each mine. A 
docket number is assigned for each of the mines as follows: (a) The 
Lone Mountain Processing, Inc., Clover Fork No. 1 Mine, (MSHA I.D. No. 
15-18647), Docket No. M-2009-024-C; (b) Huff Creek No. 1 Mine (MSHA 
I.D. No. 15-17234), Docket No. M-2010-021-C; and (c) Darby Fork No. 1 
Mine, (MSHA I.D. No. 15-02263), Docket No. M-2010-022-C. These mines 
are located in Harlan County, Kentucky.

Patricia W. Silvey,
Director, Office of Standards, Regulations and Variances.
[FR Doc. 2010-11448 Filed 5-12-10; 8:45 am]
BILLING CODE P