[Federal Register Volume 75, Number 110 (Wednesday, June 9, 2010)] [Notices] [Pages 32754-32760] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2010-13627] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2010-0408; FRL-8825-5] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 1, 2010 to April 23, 2010, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the specific PMN number or TME number, must be received on or before July 9, 2010. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2010-0408, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments. Mail: Document Control Office (7407M), Office of Chemical Safety and Pollution Prevention (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2010-0408. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information. Instructions: Direct your comments to docket ID number EPA-HQ-OPPT- 2010-0408. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e- mail. The regulations.gov website is an ``anonymous access'' system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e- mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure. FOR FURTHER INFORMATION CONTACT: For technical information contact: Bernice Mudd, Information Management Division (7407M), Office of Chemical Safety and Pollution Prevention Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8951; fax number: (202) 546-8955; e-mail address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; e-mail address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. [[Page 32755]] Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When submitting comments, remember to: i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number). ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number. iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes. iv. Describe any assumptions and provide any technical information and/or data that you used. v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced. vi. Provide specific examples to illustrate your concerns and suggest alternatives. vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats. viii. Make sure to submit your comments by the comment period deadline identified. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 1, 2010 to April 23, 2010, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs This status report identifies the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 100 Premanufacture Notices Received From: 03/01/10 to 04/23/10 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-10-0253 03/01/10 05/29/10 CBI (G) Thermoset molding (G) Methacrylate compound; ester capped Nondispersive use aromatic ether polymer P-10-0254 03/01/10 05/29/10 Piedmont Chemical (S) Ultra violet (S) 2-propenoic acid, Industries I, LLC. curable wood 2-methyl-, 2- coatings; ultra hydroxyethyl ester, violet curable metal reaction products coatings with dicyclopentadiene, 5- isocyanato-1- (isocyanatomethyl)- 1,3,3- trimethylcyclohexane , maleic anhydride and 2-methyl-1,3- propanediol P-10-0255 03/01/10 05/29/10 Piedmont Chemical (S) Ultra violet (S) 2-propenoic acid, Industries I, LLC curable wood 2-hydroxyethyl coatings; ultra ester, reaction violet curable metal products with coatings dicyclopentadiene, 5- isocyanato-1- (isocyanatomethyl)- 1,3,3- trimethylcyclohexane , maleic anhydride and 2-methyl-1,3- propanediol P-10-0256 03/01/10 05/29/10 CBI (S) Coupling agent (S) Titanium, Bu alc. for plastics; 2-ethyl-1-hexanol coupling agent for oleate stearate rubbers complexes P-10-0257 03/01/10 05/29/10 CBI (S) Polyurethane (S) 1,4-butanediol, elastomer polymer with 2,4- diisocyanato-1- methylbenzene and .alpha.-hydro- .omega.- hydroxypoly[oxy(meth yl-1,2-ethanediyl)] P-10-0258 03/01/10 05/29/10 CBI (G) Pigment additive (G) Sulfonated heteropolycycle P-10-0259 03/01/10 05/29/10 CBI (G) Pigment additive (G) Sulfonated heteropolycycle P-10-0260 03/02/10 05/30/10 H.B. Fuller (G) Industrial (G) Isocyanate- adhesive functional polyurethane prepolymer P-10-0261 03/02/10 05/30/10 H.B. Fuller (G) Industrial (G) Isocyanate- adhesive functional polyurethane prepolymer P-10-0262 03/02/10 05/30/10 Piedmont Chemical (S) Ultra violet (S) Fatty acids, C18- Industries I, LLC curable inks unsaturated, dimers, hydrogenated, bi[3- [(1-oxo-2-propen-1- yl)oxy]-2,2-bis[[(1- oxo-2-propen-1- yl)oxy]methyl]propyl ] esters P-10-0263 03/04/10 06/01/10 Marubeni Specialty (G) Polymeric (G) Substituted Chemicals Inc. component cyclomethacrylate P-10-0264 03/04/10 06/01/10 CBI (G) Monomer (G) Methacrylate ester of fatty alcohol alkoxylate [[Page 32756]] P-10-0265 03/04/10 06/01/10 CBI (S) Coatings for car (G) leather; water borne Hexamethylenediisocy industrial coatings anate homopolymer, like wood alkyl-oxy-terminated P-10-0266 03/04/10 06/01/10 CBI (S) Antioxidant for (G) Propanoic acid, plastic articles alkylthio, (1,1- dimethylethyl) - [[alkyl-4-hydroxy-2- alkylphenyl]thio]alk ylphenyl ester P-10-0267 03/05/10 06/02/10 CBI (G) Laundry detergent (G) Acrylate component copolymer P-10-0268 03/05/10 06/02/10 CBI (G) Laundry detergent (G) Acrylate component copolymer P-10-0269 03/09/10 06/06/10 CBI (S) Extrusion of (G) Polymer of tubing systems; aromatic injection molding of dicarboxylic acid special applications and alkane diamine P-10-0270 03/10/10 06/07/10 CBI (G) Raw material (G) Aromatic polyester P-10-0271 03/12/10 06/09/10 CBI (G) Material for (G) Alkyl electronic parts bis(methoxymethyl)hy drocarbomocycle P-10-0272 03/10/10 06/07/10 Robertet, Inc. (S) As an odoriferous (S) Oils, Macrocystis component of pyrifera fragrance compounds P-10-0273 03/12/10 06/09/10 CBI (G) Treatment for (G) textiles Perfluoroalkylethyl methacrylate copolymer P-10-0274 03/12/10 06/09/10 CBI (G) Adhesive (G) 1,1'- component methylenebis[isocyan atobenzene], polymer with polyester polyols and a polyether polyol P-10-0275 03/15/10 06/12/10 CBI (G) Material for (G) Substituted electronic parts polyhydro-oxo- naphthalene sulfonate with alkylidene polycarbomonocycle P-10-0276 03/15/10 06/12/10 CBI (G) Antiswelling (G) Polyethylene agent for clay polyammonium salt P-10-0277 03/15/10 06/12/10 CBI (G) Material for (G) [5,5'- electronic parts biisobenzofuran]- 1,1',3,3'-tetrone, polymer with 1,4- benzenediamine, 4,4'- oxybis[benzenamine] and alkylaminosiloxane P-10-0278 03/15/10 06/12/10 CBI (G) Material for (G) Polycarbomono electronic parts cyclic sulphonium camphosulphonate P-10-0279 03/15/10 06/12/10 CBI (G) Material for (G) Substituted electronic parts polyhydro-oxo- naphthalene sulfonate with alkylidyne polycarbomocycle P-10-0280 03/15/10 06/12/10 CBI (G) Adhesion (G) Aluminum B- promoter, corrosion alanine complex inhibitor P-10-0281 03/17/10 06/14/10 CBI (G) Component of foam (G) Fatty acid polymer with aliphatic diol and aromatic diacid P-10-0282 03/17/10 06/14/10 CBI (G) Component in (G) Maleated nylon injection molded graft copolymer parts P-10-0283 03/17/10 06/14/10 CBI (G) Component in (G) Maleated nylon injection molded graft copolymer parts P-10-0284 03/17/10 06/14/10 CBI (G) Chemical (G) Boron ester intermediate P-10-0285 03/17/10 06/14/10 Syngenta Crop (S) Intermediate (S) Benzoic acid, 3- Protection, Inc. amino-2-mercapto- P-10-0286 03/19/10 06/16/10 Instrumental polymer (G) Resin for (G) Hydroxyl- technologies, LLC. coatings terminated aliphatic polycarbonate P-10-0287 03/19/10 06/16/10 Instrumental Polymer (G) Resin for (G) Hydroxyl- Technologies, LLC. coatings terminated aliphatic polycarbonate P-10-0288 03/19/10 06/16/10 Instrumental Polymer (G) Resin for (G) Hydroxyl- Technologies, LLC. coatings terminated aliphatic polycarbonate P-10-0289 03/18/10 06/15/10 Instrumental Polymer (G) Resin for (G) Hydroxyl- Technologies, LLC. coatings terminated aliphatic polycarbonate P-10-0290 03/22/10 06/19/10 Reichhold, Inc. (S) Base resin for (G) Methacrylate gel coat compounds terminated polyester (used in FRP applications) P-10-0291 03/23/10 06/20/10 FRX Polymers, Inc. (G) FRX phosphonate (S) CA index name of oligomer is a non- respective polymer: halogenated flame Phosphonic acid, p- retardant additive methyl-, diphenyl that addresses the ester, polymer with need to replace 4,4'(1methylethylide current commercial ne)bis[phenol] bromide-containing flame retardant additives that are being phased out due to environmental regulation. Flame retardants are required to meet fire safety standards in order to reduce flammability of combustible materials. P-10-0292 03/23/10 06/20/10 CBI (G) Lubricant oil (G) Alkanoic acid, additive mixed esters with dipentaerythritol and pentaerythritol P-10-0293 03/23/10 06/20/10 CBI (G) Additive (G) Methacrylate copolymer [[Page 32757]] P-10-0294 03/24/10 06/21/10 Scott bader, Inc. (G) Resin or resin (G) Unsaturated additive urethane acrylate P-10-0295 03/25/10 06/22/10 CBI (G) Component of foam (G) Fattay acid polymer with aliphatic diol and aromatic diacid P-10-0296 03/26/10 06/23/10 3M (G) Fluorinated (G) Fluorinated chemical carboxylic acid intermediate P-10-0297 03/26/10 06/23/10 3M (G) Fluorinated (G) Fluorinated chemical alcohol intermediate P-10-0298 03/26/10 06/23/10 3M (G) Fluorinated (G) Fluorinated intermediate carboxylate ester P-10-0299 03/26/10 06/23/10 3M (G) Fluorinated (G) intermediate Perfluoroalkoxyalkyl vinyl ether P-10-0300 03/26/10 06/23/10 3M (G) Fluorinated (G) Fluorinated emulsifier surfactant P-10-0301 03/25/10 06/22/10 Robertet, Inc. (S) As an odoriferous (S) Oils, laminaria component of digitata fragrance compounds P-10-0302 03/29/10 06/26/10 CBI (G) Destructive use (G) Fatty acid amine in fuels salt P-10-0303 03/30/10 06/27/10 CBI (G) Constituent in (G) Heterocycle, ink formulation disubstituted, salt with anion (1:1) P-10-0304 03/30/10 06/27/10 CBI (S) Acid dye for (G) Product is a coloring anodized trivalent chrome aluminum complex of an azo dye P-10-0305 03/29/10 06/26/10 CBI (G) Paint component (S) Acetic acid ethenyl ester, polymer with ethane and methyl 2-methyl- 2-propenoate P-10-0306 03/30/10 06/27/10 CBI (S) Binder for car (G) Unsaturated repair putty polyester resin P-10-0307 03/30/10 06/27/10 Dubois Chemicals Inc. (S) Industrial boiler (G) Powdered amine treatment P-10-0308 03/30/10 06/27/10 Oleon Americas, Inc. (G) Industrial (S) Fatty acids, hydraulic fluid C16 18 and C18- unsaturated, mixed esters with adipic acid and trimethylolpropane P-10-0309 03/30/10 06/27/10 CBI (S) Acid dye for (G) Product is a coloring anodized trivalent chrome aluminum complex of an azo dye P-10-0310 03/30/10 06/27/10 Futurefuel Chemical (S) Monomer in alkyl (S) Glycerol formal 5- Company resins; monomer in hydroxy-1,3-dioxane surfactants solvent; antifreeze in paints and coatings; coalecing aid - inks and coatings P-10-0310 03/30/10 06/27/10 Futurefuel Chemical (S) Monomer in alkyl (S) Glycerol formal Company resins; monomer in isomeric mixture of surfactants solvent; 4-hydroxymethyl-1,3- antifreeze in paints dioxolane and coatings; coalecing aid - inks and coatings P-10-0311 04/01/10 06/29/10 CBI (S) Release agent (G) Alkyl alkoxy siloxane P-10-0312 04/01/10 06/29/10 Akzo Nobel Coatings (S) Dispersant for (S) 2,5-furandione, Inc. the preparation of telomer with stir-in pigments in ethenylbenzene and car paints (1- methylethyl)benzenem imides with polyethylene- polypropylene glycol 2-aminopropyl me ether P-10-0313 04/01/10 06/29/10 ICI Performance (S) Opacifying (S) Diphosphoric Products LP pigment for ceramic acid, calcium salt whiteware (1:1) P-10-0314 03/23/10 06/20/10 Sasol Chemicals North (S) Printing ink (S) Aluminum, (2- America, LLC component, acts as butanolato)bis[ethyl- gallant, rheological 3-(oxo-, modifier; for .kappa.,O)butanoato- industrial use only; ,.kappa.,O']- no known consumer uses P-10-0315 03/31/10 06/28/10 CBI (S) Release agent (G) Me alkyl siloxane P-10-0316 03/31/10 06/28/10 CBI (G) Monomer for (G) Perfluoroalkyl polymer for textile acrylate treatment additive P-10-0317 03/31/10 06/28/10 CBI (G) Paper treatment (G) Fluoroalkyl additive acrylate copolymer P-10-0318 04/02/10 06/30/10 3M Company (S) Dispersant (G) Propylene oxide ligand P-10-0319 04/02/10 06/30/10 CBI (G) Polyamide phenol (G) Aromatic for coatings, open, halogenated acid, non-dispersive use polymer with a halogenated aromatic diamine and an aromatic phenolic amine P-10-0320 04/02/10 06/30/10 CBI (G) Open, non- (G) Aromatic dispersive use dianhydride, polymer with an aromatic diamine and an aliphatic unsaturated ester P-10-0321 04/02/10 06/30/10 CBI (G) Concrete additive (G) Modified phenol resin P-10-0322 04/02/10 06/30/10 CBI (G) Concrete additive (G) Modified phenol resin P-10-0323 03/15/10 06/12/10 Canon U.S.A., Inc. (G) Additive for ink (G) Alkyl jet printing ink methacrylate polymer with branched benzene, alkyl acrylate, hydroxyalkyl methacrylate, methacrylic acid and substituted methacrylate, alkaline metal salt [[Page 32758]] P-10-0324 04/01/10 06/29/10 CBI (S) Curing agent or (G) Urea, N,N'- accelerator for (methyl-1,3- epoxy resin phenylene)bis[N',N'- bis[3- (polyalkyleneamino]- , compound with formaldehyde polymer with phenol P-10-0325 04/05/10 07/03/10 The Goodyear Tire and (S) Polymerization (G) Neodymium ziegler- Rubber Company catalyst natta catalyst P-10-0326 04/02/10 06/30/10 CBI (G) Site-limited (S) Propane, intermediate 1,1,1,2,3,3- hexafluoro- P-10-0327 04/02/10 06/30/10 CBI (G) Site-limited (S) 1-propene, intermediate 1,2,3,3,3- pentafluoro- P-10-0328 04/05/10 07/03/10 H.B. Fuller (G) Industrial (G) 2-propenoic acid, adhesive 2-mehyl-, alkyl ester, polymer with ethenyl acetate, N- (hydroxymethyl)-2- propenamide, methyl 2-methyl-2- propenoate and alkyl methacrylate P-10-0329 04/05/10 07/03/10 CBI (G) Finishing agent (S) Hexadecanamide, N- for textile goods [3-(hexadecyloxy)-2- hydroxypropyl]-N-(2- hydroxyethyl)- P-10-0330 04/05/10 07/03/10 CBI (G) Component of (G) Trimethylpentene fragrance mixture oxymethylpropyl for highly ester of dispersive cyclopropanecarboxyl applications. ic acid P-10-0331 04/05/10 07/03/10 Reichhold, Inc. (S) Carrier resin for (G) Amine salt of coatings vegetable oil, polymer with hydroxy substituted carboxylic acid, aliphatic diisocyanate, tetra hydroxy alkane and polyol P-10-0332 04/06/10 07/04/10 CBI (S) Polyol for rigid (G) Amino alcohol foam substituted phenol P-10-0333 04/06/10 07/04/10 CBI (S) Industrial (G) 1,4:3,6- monomer to be dianhydrohexitol-, polymerized or reaction produc6s reacted. with chloro- oxopropoxy-benzoic acid and hydroxy- methoxybenzoic acid P-10-0334 04/06/10 07/04/10 CBI (S) Industrial (G) Benzoic acid, monomer to be (acryloxy)alkoxy-, polymerized or 1,1'- reacted. (methylphenylene) ester P-10-0335 04/06/10 07/04/10 CBI (G) Metal (G) Polyester type coating(surface urethane resin treatment) P-10-0336 04/06/10 07/04/10 CBI (G) Reactive diluent (G) Acrylated for unsaturated polyester oligomer polyester and vinyl ester P-10-0337 04/06/10 07/04/10 CBI (G) Reactive diluent (G) Methacrylated for unsaturated polyester oligomer polyester and vinyl ester P-10-0338 04/06/10 07/04/10 CBI (G) Laundry detergent (G) Acrylate component copolymer P-10-0339 04/06/10 07/04/10 CBI (G) Laundry detergent (G) Acrylate component copolymer P-10-0340 04/05/10 07/03/10 Henkel adhesives (S) Hot melt adhesive (S) Fatty acids, C18- unsaturated, dimers, polymers with ethylenediamine, piperazine, polypropylene glycol diamine, sebacic acid and tall-oil fatty acids P-10-0341 04/05/10 07/03/10 CBI (S) Crosslinker for (G) Polyether polymers polycarbodiimide P-10-0342 04/06/10 07/04/10 Bimax Inc. (S) Intermediate for (G) Poly 2-ethylhexyl production of methacrylate dispersant polymer for paint colorants P-10-0343 04/09/10 07/07/10 Marubeni Specialty (G) Polymeric (G) Substituted Chemicals Inc. component cyclomethacrylate P-10-0344 04/05/10 07/03/10 CBI (G) Plasticizing (G) Phenoxy alkyl component of a two ether part coating P-10-0345 04/16/10 07/14/10 CBI (G) Printing ink (G) Hexanoic acid, 6- additive [[2-[[5-[[2,7- dihydro-3-methyl-2,7- dioxo-1-(3- sulfobenzoyl)- heteropolycycle-6- yl]amino]-2,4- disulfophenyl]amino]- 2-oxoethyl]amino]-, ammonium sodium salt (1:?:?) P-10-0346 04/16/10 07/14/10 CBI (G) Printing ink (G) Copper, phthalic additive anhydride-2,3- pyridinedicarboxylic acid-urea reaction products complexes, aminosulfonylsulfo[[ 2-[[4-[(2- sulfoethyl)amino]-6- [(4- sulfophenyl)amino]- monoheterocycle-2- yl]amino]ethyl]amino ]sulfonyl derivates, sodium salts P-10-0347 04/19/10 07/17/10 CBI (S) Electrical (G) Modified insulating varnish polyester for motors, generators, transformers P-10-0348 04/16/10 07/14/10 Dow Chemical Company (S) Chemical (G) Cyclic nitrile intermediate aldehyde [[Page 32759]] P-10-0349 04/16/10 07/14/10 Dow Chemical Company (S) Chemical (G) Cyclic nitrile intermediate aldehyde P-10-0350 04/16/10 07/14/10 Dow Chemical Company (S) Chemical (G) Cyclic nitrile intermediate aldehyde P-10-0351 04/16/10 07/14/10 Zeon Chemicals L.P. (S) Automotive seals (G) Modified and gaskets acrylonitrile, butadiene polymer, hydrogenated -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: II. 57 Notices of Commencement From: 03/01/10 to 04/23/10 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-03-0481 03/08/10 01/28/10 (S) 5,2,6- (iminomethenimino)-1H- imidazo[4,5-b]pyrazine, octahydro-1,3,4,7,8,10- hexanitro- P-03-0568 03/08/10 01/28/10 (S) 5,2,6- (iminomethenimino)-1H- imidazo[4,5-b]pyrazine, 1,3,8,10- tetraacetyloctahydro- P-03-0789 03/22/10 03/09/10 (G) Derivatized butyl ester photoinitiator P-06-0393 03/18/10 02/10/10 (G) Aliphatic urethane acrylate oligomer P-06-0494 03/01/10 02/23/10 (G) Fluoroalkyl methacrylate copolymer P-06-0598 03/08/10 03/01/10 (G) Polyester polyol urethane modified epoxy resin P-06-0825 04/20/10 03/24/10 (G) Oxepanone, polymer with dialkyl-alkanediol, alkyl-(hydroxyaalkyl)- alkanediol, carbocycle, isocyanato- (isocyanatoalkyll)- trialkyl-, alkanoic acid, hydroxy-(hydroxyalkyl)- alkyl-, alkylamine, N,N- dialkyl-, aminoalkyl- trialkylcarbocyclicamine, and alkyldiamine P-06-0832 04/16/10 03/31/10 (S) Fatty acids, palm-oil, me esters P-06-0833 04/16/10 03/19/10 (S) Fatty acids, peanut- oil, me esters P-06-0834 04/16/10 03/22/10 (S) Fatty acids, linseed- oil, me esters P-07-0328 03/05/10 02/12/10 (G) NCS 2: Substituted phenol P-07-0425 04/09/10 03/16/10 (G) MDI polyether prepolymer P-07-0690 04/12/10 04/02/10 (G) Polyester amine adduct P-08-0125 03/30/10 03/05/10 (G) Methacrylate ester of a polyester from an aromatic dicarboxylate and alkyl polyols P-08-0138 04/14/10 03/30/10 (S) Carbonotrithioic acid, bis(phenylmethyl)ester P-08-0165 04/16/10 05/21/08 (G) Extract of tea P-08-0561 04/16/10 11/25/08 (G) Cycloalkyl piperonyl ether P-08-0647 03/08/10 02/23/10 (S) Extractives and their physically modified derivatives. Jasminum sambac. Oils, jasmine, jasminum sambac P-08-0672 03/26/10 03/02/10 (G) Polyester polyurethane aqueous dispersion P-09-0058 03/23/10 03/04/10 (G) Alkenylsuccinicanhydride derivative P-09-0179 04/07/10 04/02/10 (G) Fatty acids, dimers, polymers with dihydroxyfunctional monocarboxylic acid, alkane diol, alkyl isocyanate, alkanediol, aromatic anhydride, glycol ether and alkanetriol, compounds with amino alcohol P-09-0269 03/11/10 03/08/10 (G) Crosslinked polystyrene resin with chelating bispicolylamine groups P-09-0332 04/21/10 04/08/10 (G) Phosphonic acid ester P-09-0371 03/03/10 01/31/10 (G) Organic acid metal halide complex P-09-0372 03/08/10 02/23/10 (S) Oils, spartium junceum P-09-0381 03/17/10 02/19/10 (G) Polycarbonate diol P-09-0418 03/22/10 03/01/10 (G) Surface modified aluminum hydroxide P-09-0463 03/18/10 02/14/10 (G) Salt of polymer of methylenebis[isocyanatoca rbomonocycle],alkanepolyo ls and amine derivatives P-09-0500 03/02/10 01/23/10 (G) 1,4-benzenedisulfonic acid, 2,2'-[1,2- ethenediylbis[(3-sulfo- 4,1-phenylene)imino[6- [bis(alkanol)amino]-1,3,5- triazine-4,2- diyl]imino]]bis-, hexasodium salt P-09-0525 04/06/10 03/18/10 (G) Hydroxyamino aryl amine P-09-0526 04/06/10 03/18/10 (G) Hydroxyamino aryl triamine P-09-0562 03/01/10 02/16/10 (G) Polymer of acrylamido alkyl propane sulfonic acid sodium ammonium salt and two acrylic monomers P-09-0597 03/08/10 02/23/10 (S) Oils, cypress, cypressus funebris P-09-0634 04/05/10 03/16/10 (S) Phenol, 4-(1,1- dimethylethyl)-2-nitro- P-09-0647 03/05/10 02/05/10 (G) Fatty acids, C18- unsaturted, dimers, polymers with glycidyl alkanoate, 4-oxopentanoic acid and trimethylolpropane P-09-0649 04/16/10 04/08/10 (G) 2,5-furandione, polymer with alkene, alkyl ester, substituted imidazoline amide P-09-0650 03/08/10 02/18/10 (G) Dimer fatty acid based polyester polyurethane [[Page 32760]] P-10-0035 04/16/10 03/17/10 (G) Sodium carboxylate P-10-0041 03/12/10 02/11/10 (G) Polyether polyacid comb polymer P-10-0051 03/17/10 03/10/10 (S) Starch, 2-carboxyethyl 2-methyl-3-oxo-3-[[3- (trimethylammonio)propyl] amino]propyl ether, chloride P-10-0053 04/02/10 03/26/10 (G) Halogenated aromatic amine P-10-0074 04/19/10 03/23/10 (G) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-2- propen -1-yl)oxy]ethyl ester, polymer with butyl 2-methyl-2-propenoate, ethenylbenzene, 2- ethylhexyl 2-propenoate, methyl 2-methyl-2- propenoate, phosphoric acid, di-ester with hydroxy ethyl methacrylate and 2- (phosphonooxy) ethyl 2- methyl-2-propenoate P-10-0075 04/06/10 03/11/10 (G) Brominated aromatic polyether polyester P-10-0077 03/11/10 03/04/10 (G) Linear hydroxy funtional polyester P-10-0078 03/08/10 02/27/10 (G) Capped polyurethane adduct P-10-0082 03/18/10 02/27/10 (S) 1,2,3-propanetriol, homopolymer, hexadecanoate octadecanoate P-10-0085 03/16/10 03/05/10 (G) Bismuth salt of lactic acid P-10-0100 03/25/10 03/21/10 (G) Polyester amine compound P-10-0102 04/01/10 03/24/10 (S) Oils, jasmine, jasminum sambac P-10-0103 04/19/10 03/26/10 (S) Fatty acids, C18- unsaturated, di-me esters, hydrogenated, polymers with diethylene glycol, 1,6-diisocyanato- 2,2,4-trimethylhexane, 1,6-diisocyanato-2,4,4- trimethylhexane, 2-heptyl- 3,4-bis(9- isocyanatononyl)-1- pentylcyclohexane, 1,1'- methylenebis[4- isocyanatobenzene], 2- oxepanone and tricyclodecanedimethanol, 2-hydroxyethyl acrylate- blocked P-10-0140 04/16/10 03/31/10 (G) Urethane modified epoxy resin P-10-0142 04/12/10 04/01/10 (G) Furan, 2-(1,1- dimethylethyl)-2, 5- dihydro-alkyl substituted P-10-0143 04/08/10 04/02/10 (G) Hydroxyl-terminated aliphatic polycarbonate P-10-0147 04/19/10 04/03/10 (G) Alkoxylated alkylamine P-10-0149 04/19/10 04/07/10 (G) Alkoxylated alkylamine salt P-10-0165 04/19/10 04/09/10 (G) Polyester resin P-99-0332 03/18/10 03/01/10 (G) Urethane modified aromatic isocyanate ---------------------------------------------------------------------------------------------------------------- List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: May 14, 2010. Darryl S. Ballard, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2010-13627 Filed 6-8-10; 8:45 am] BILLING CODE 6560-50-S