[Federal Register Volume 75, Number 110 (Wednesday, June 9, 2010)] [Notices] [Pages 32760-32763] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2010-13628] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2010-0456 FRL-8829-7] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from April 26, 2010 to May 7, 2010, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the specific PMN number or TME number, must be received on or before July 9, 2010. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2010-0456, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2010-0456. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information. Instructions: Direct your comments to docket ID number EPA-HQ-OPPT- 2010-0456. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e- mail. The regulations.gov website is an ``anonymous access'' system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e- mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other [[Page 32761]] contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure. FOR FURTHER INFORMATION CONTACT: For technical information contact: Bernice Mudd, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8951; fax number: (202) 564-8955; e-mail address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; fax number: (202) 564-5603 e-mail address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When submitting comments, remember to: i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number). ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number. iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes. iv. Describe any assumptions and provide any technical information and/or data that you used. v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced. vi. Provide specific examples to illustrate your concerns and suggest alternatives. vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats. viii. Make sure to submit your comments by the comment period deadline identified. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from April 26, 2010, to May 7, 2010, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs and TMEs This status report identifies the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. [[Page 32762]] I. 20 Premanufacture Notices Received From: 4/26/10 to 5/07/10 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-10-0352 04/23/10 07/21/10 CBI (G) Coating hardner (G) Benzene, isocyanatoalkyl-, polymer with diisocyanatoalkane, polyalkylene glycol alkyl ether-blocked P-10-0353 04/26/10 07/24/10 CBI (S) Epoxy curing (G) Modified agent for use in polyalkylene flooring polyamine reacted applications with Bisphenol A diglycidyl ether and modified epoxy resin P-10-0354 04/26/10 07/24/10 CBI (G) Diluent in mold (G) Acrylonitrile- manufacture acrylate copolymer P-10-0355 04/26/10 07/24/10 International Flavors (S) Raw material for (S) and Fragrances, Inc. use in fragrances Cyclohexanecarboxyli for soaps, c acid, 3-methyl-, detergent, cleaners methyl ester, (1R, and other household 3R)-rel- and consumer products P-10-0355 04/26/10 07/24/10 International Flavors (S) Raw material for (S) and Fragrances, Inc. use in fragrances Cyclohexanecarboxyli for soaps, c acid, 3-methyl-, detergent, cleaners methyl ester, (1R, and other household 3S)-rel- and consumer products P-10-0356 04/26/10 07/24/10 CBI (G) Adhesive (G) MDI modified polyester resin P-10-0357 04/26/10 07/24/10 CBI (G) Lubricant (G) Zinc alkyl additive dithiophosphate P-10-0359 04/30/10 07/28/10 CBI (S) Flame retardant (G) Heterocyclic salt for use in adhesives and coatings P-10-0360 04/30/10 07/28/10 CBI (G) Used both in a (S) 1-hexene, polymer open, non-dispersive with 1-propene use as a plastics additive and in a printing application and in a destructive use as a reactant P-10-0361 04/30/10 07/28/10 CBI (G) Organic (G) Substituted intermediate in phenol substituted bis- phenol manufacturing P-10-0362 04/30/10 07/28/10 CBI (G) Organic (G) Substituted bis- intermediate in bis- phenol phosphite synthesis P-10-0363 04/30/10 07/28/10 CBI (G) Ligand for (G) Aromatic catalyst synthesis bisphosphite P-10-0364 04/30/10 07/28/10 CBI (G) Soluble metal (G) Bisphospite catalyst for organic nickel cyanoalkyl synthesis complex P-10-0365 04/30/10 07/28/10 Robertet, Inc. (S) As an odoriferous (S) Extractives and component of their physically fragrance compounds modified derivatives. Santalum austrocaledonicum. P-10-0366 04/30/10 07/28/10 CBI (G) Printing (G) Graphite applications, open, non-dispersive use P-10-0367 04/23/10 07/21/10 CBI (G) Carbon black for (G) Carbon black general industrial derived from the use. pyrolysis of rubber tire shreds P-10-0368 05/03/10 07/31/10 CBI (G) Curing agent (G) Epoxy-arylamine polymer P-10-0369 04/23/10 07/21/10 CBI (S) Hydrocarbons for (G) Tire pyrolysis general industrial oil or tire-derived use oil P-10-0370 05/04/10 08/01/10 CBI (G) Monomer (G) Alkylol methacrylate P-10-0371 05/06/10 08/03/10 CBI (S) Adhesion promoter (G) Alkoxysilane -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TME received: II. 1 Test Marketing Exemption Notice Received From: 04/26/10 to 05/07/10 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- T-10-0004 04/23/10 06/06/10 CBI (G) Carbon black for (G) Carbon black general industrial derived from the use pyrolysis of rubber tire shreds -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: II. 9 Notices of Commencement From: 4/26/10 to 5/07/10 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-08-0509 04/29/10 03/31/10 (G) Perfluorinated aliphatic carboxylic acid, ammonium salt [[Page 32763]] P-09-0014 04/26/10 04/16/10 (S) Deninition: Extractives and their physically modified derivatives. Iris germanica. Oils Iris germanica, resinold P-09-0483 04/30/10 04/23/10 (G) Polyether modified polyamine P-09-0652 04/30/10 04/16/10 (G) Alkyl alkanol amine P-10-0021 05/05/10 04/26/10 (G) Isocyanate functional polyester urethane polymer P-10-0044 04/28/10 04/20/10 (S) Definition: Extractives and their physically modified derivatives. Callitropsis nootkatensis. Oils, callitropsis nootkatensis P-10-0170 04/27/10 04/21/10 (G) Urethane acrylate P-10-0182 04/28/10 04/19/10 (G) Aromatic isocyanate reaction product with sand P-95-0756 05/06/10 04/15/10 (G) N,N-tetraalkyl- alkylenediamine, propoxylated ---------------------------------------------------------------------------------------------------------------- List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: May 27, 2010. Darryl Ballard, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2010-13628 Filed 6-8-10; 8:45 am] BILLING CODE 6560-50-S