[Federal Register Volume 75, Number 121 (Thursday, June 24, 2010)]
[Notices]
[Pages 36121-36122]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-15270]
[[Page 36121]]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Mine Safety and Health Administration
Proposed Information Collection Request Submitted for Public
Comment and Recommendations; Safety Standards for Underground Coal Mine
Ventilation--Belt Entry Used as an Intake Air Course To Ventilate
Working Sections and Areas Where Mechanized Mining Equipment Is Being
Installed or Removed
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Department of Labor, as part of its continuing effort to
reduce paperwork and respondent burden, conducts a pre-clearance
consultation program to provide the general public and Federal agencies
with an opportunity to comment on proposed and/or continuing
collections of information in accordance with the Paperwork Reduction
Act of 1995 (PRA95) [44 U.S.C. 3506(c)(2)(A)]. This program helps to
ensure that requested data can be provided in the desired format,
reporting burden (time and financial resources) is minimized,
collection instruments are clearly understood, and the impact of
collection requirements on respondents can be properly assessed.
Currently, the Mine Safety and Health Administration (MSHA) is
soliciting comments concerning the extension of the information
collection related to the 30 CFR 75.350, 75.351, 75.352, 75.371.
DATES: All comments must be received by midnight Eastern Daylight
Savings Time on August 23, 2010.
ADDRESSES: Comments must clearly be identified with the rule title and
may be submitted to MSHA by any of the following methods:
(1) Electronic mail: [email protected].
(2) Facsimile: (202) 693-9441.
(3) Regular Mail: MSHA, Office of Standards, Regulations, and
Variances, 1100 Wilson Blvd., Room 2350, Arlington, VA 22209-3939.
(4) Hand Delivery or Courier: MSHA, Office of Standards,
Regulations, and Variances, 1100 Wilson Blvd., Room 2350, Arlington, VA
22209-3939. Sign in at the receptionist's desk on the 21st floor.
FOR FURTHER INFORMATION CONTACT: Mario Distasio, Chief of the Economic
Analysis Division, Office of Standards, Regulations, and Variances,
MSHA, at [email protected] (e-mail), 202-693-9445 (voicemail),
202-693-9441 (facsimile).
SUPPLEMENTARY INFORMATION:
I. Background
The Safety Standards for Underground Coal Mine Ventilation Belt
Entry rule provides safety requirements for the use of the conveyor
belt entry as a ventilation intake to course fresh air to working
sections and areas where mechanized mining equipment is being installed
or removed in mines with three or more entries. This rule establishes
additional protective provisions that mine operators must follow if
they want to use belt air to ventilate working sections.
75.351(b)(3) requires posting at the surface location of
an up-to-date map or schematic showing air flow directions and the
location and type of all Atmospheric Monitoring System (AMS) sensors.
75.351(n)(1) requires that sensors used to detect CO or
smoke be visually examined at least once each shift, when belts are
operated as part of a production shift. If hazardous conditions are
found during the visual exam, then a log of such conditions must be
filed under existing section 75.363(b)--Hazardous conditions; posting,
correcting and recording (OMB approval 1219-0088).
75.351(n)(2) and 75.351(n)(3) require that alarms for AMS
be tested every seven days and that CO, smoke, or methane sensors be
calibrated, every 31 days respectively.
75.351(o)(1)(i) requires that a record be made if the AMS
emits an alert or alarm signal.
75.351(o)(1)(ii) requires that, if a malfunction in the
system occurs, a record be made of the malfunction and the corrective
action to return the system to proper operating condition.
75.351(o)(1)(iii) requires that the persons doing the
weekly test of alert and alarm signals, the monthly calibration, or
maintenance of the system make a record of these tests, calibrations,
or maintenance.
75.351(o)(3) requires that all records concerning the AMS
be kept in a book or electronically in a computer system that is secure
and not susceptible to alteration.
75.351(p) requires the mine operator to keep these records
for at least one year at a surface location and to make them available
for inspection by authorized representatives of the Secretary and
representatives of miners.
75.351(q) requires that a record of the annual AMS
operator training be kept. The record will include the content of
training, the person conducting the training, and the date the training
is conducted.
75.352(a) and 75.352(b) require the designated AMS
operator or other appropriate personnel to take actions promptly when
malfunction, alert, or alarm signals are received.
II. Desired Focus of Comments
MSHA is particularly interested in comments that:
Evaluate whether the proposed collection of information is
necessary for the proper performance of the functions of the agency,
including whether the information will have practical utility;
Evaluate the accuracy of the agency's estimate of the
burden of the proposed collection of information, including the
validity of the methodology and assumptions used;
Enhance the quality, utility, and clarity of the
information to be collected; and
Minimize the burden of the collection of information on
those who are to respond, including through the use of appropriate
automated, electronic, mechanical, or other technological collection
techniques or other forms of information technology, e.g., permitting
electronic submissions of responses.
A copy of the proposed information collection request can be
obtained by contacting the employee listed in the FOR FURTHER
INFORMATION CONTACT section of this notice, or viewed on the Internet
by selecting ``Rules & Reg'', and then selecting ``FedReg.Docs''. On
the next screen, select ``Paperwork Reduction Act Supporting
Statement'' to view documents supporting the Federal Register Notice.
III. Current Actions
This request for collection of information contains recordkeeping
provisions for 30 CFR 75.350, 75.351, 75.352, 75.371 Safety Standards
for Underground Coal Mine Ventilation--Belt Entry Used as an Intake Air
Course To Ventilate Working Sections and Areas Where Mechanized Mining
Equipment Is Being Installed or Removed. MSHA does not intend to
publish the results of this information collection and is not seeking
approval to not display the expiration date or OMB approval number for
this collection of information.
There are no certification exceptions identified with this
information collection and the collection of this information does not
employ statistical methods.
Type of Review: Extension.
Agency: Mine Safety and Health Administration.
OMB Number: 1219-0138.
[[Page 36122]]
Frequency: On Occasion.
Affected Public: Business or other for-profit.
Cost to Federal Government: No cost to Federal Government.
Total Burden Respondents: 21.
Total Number of Responses: 251.
Total Burden Hours: 4,255.
Total Hour Burden Cost (operating/maintaining): $303,512.
Comments submitted in response to this notice will be summarized
and/or included in the request for Office of Management and Budget
approval of the information collection request; they will also become a
matter of public record.
Dated: June 18, 2010.
Patricia W. Silvey,
Director, Office of Standards, and Regulations, and Variances.
[FR Doc. 2010-15270 Filed 6-23-10; 8:45 am]
BILLING CODE 4510-43-P