[Federal Register Volume 75, Number 183 (Wednesday, September 22, 2010)] [Notices] [Pages 57770-57776] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2010-23718] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2010-0800; FRL-8847-7 Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 30, 2010 to August 31, 2010, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the specific PMN number or TME number, must be received on or before October 22, 2010. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2010-0800, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2010-[insert Docket ID no.]. The DCO is open from [[Page 57771]] 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information. Instructions: Direct your comments to docket ID number EPA-HQ-OPPT- 2010-0800. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e- mail. The regulations.gov website is an ``anonymous access'' system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e- mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure. FOR FURTHER INFORMATION CONTACT: For technical information contact: Bernice Mudd, Information Management Division 7407M, Office of Chemical Safety Pollution Prevention, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8951; fax number: (202) 564-8955; e-mail address: [[email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; e-mail address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When submitting comments, remember to: i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number). ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number. iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes. iv. Describe any assumptions and provide any technical information and/or data that you used. v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced. vi. Provide specific examples to illustrate your concerns and suggest alternatives. vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats. viii. Make sure to submit your comments by the comment period deadline identified. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 30, 2010 to August 31, 2010, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs and TME This status report identifies the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. [[Page 57772]] In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 62 Premanufacture Notices Received From: 7/30/10 to 8/31/10 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-10-0477 07/30/10 10/27/10 3M (S) Filler in epoxy (G) Surface modified resin ceramic particle P-10-0478 08/03/10 10/31/10 CBI (G) Moisture curing (G) Isocyanate polyurethane terminated urethane adhesive polymer P-10-0479 08/03/10 10/31/10 CBI (G) Moisture curing (G) Isocyanate polyurethane terminated urethane adhesive polymer P-10-0480 08/03/10 10/31/10 CBI (G) Moisture curing (G) Isocyanate polyurethane terminated urethane adhesive polymer P-10-0481 08/03/10 10/31/10 CBI (G) Moisture curing (G) Isocyanate polyurethane terminated urethane adhesive polymer P-10-0482 08/03/10 10/31/10 CBI (G) Moisture curing (G) Isocyanate polyurethane terminated urethane adhesive polymer P-10-0483 08/03/10 10/31/10 CBI (G) Moisture curing (G) Isocyanate polyurethane terminated urethane adhesive polymer P-10-0484 07/30/10 10/27/10 Elementis (G) Dispersant (G) Esterified Specialties, Inc. polymer of styrene, maleic anhydride and ethenylbenzene, potassium salt P-10-0485 07/30/10 10/27/10 CBI (G) Open, non- (G) Modified dispersive textile fluorinated acrylate finish P-10-0486 07/30/10 10/27/10 Sasol North America (S) Enhanced oil (S) Poly[oxy(methyl- recovery - injected 1,2-ethanediyl)], downhole to spur oil .alpha.-sulfo- production .omega.-hydroxy- ,C12 13-branched and linear alkyl ethers, sodium salts P-10-0487 07/30/10 10/27/10 Sasol North America (S) Enhanced oil (S) Poly[oxy(methyl- recovery - injected 1,2-ethanediyl)], downhole to spur oil .alpha.-sulfo- production .omega.-hydroxy- ,C14 15-branched and linear alkyl ethers, sodium salts P-10-0488 08/02/10 10/30/10 CBI (G) Paper coating (G) Poly(urethane urea) P-10-0489 08/02/10 10/30/10 Honeywell (S) Intermediate (G) Pentahalosubstituted alkene P-10-0490 08/03/10 10/31/10 CBI (S) Hot melt adhesive (G) Dimer fatty acid, for bonding polymer with tall- different substrates oil fatty acid, like plastics, alkyl diacid and metals, wood, alkyldiamines packaging materials, and leather P-10-0491 08/04/10 11/01/10 GE Water and Process (G) Separation (G) Amphoteric Technologies coagulant acrylic polymer P-10-0492 08/05/10 11/02/10 CBI (G) Polymer additive (G) Acetoacetonate end capped polyol P-10-0493 08/06/10 11/03/10 CBI (G) Curable epoxy (G) Bisphenol A epoxy resin hema phthalate P-10-0494 08/09/10 11/06/10 CBI (G) Intermediate (G) Polyphenol ether chemical product P-10-0495 08/10/10 11/07/10 CBI (G) Coating additive (G) Poly(oxy-1,2- ethanediyl),.alpha.,- monoalkyl ethers- .omega.- mono(hydrogen maleate)- P-10-0496 08/10/10 11/07/10 CBI (G) Open, non- (G) Poly acrylate dispersive use (additive for coating layer) P-10-0497 08/10/10 11/07/10 Firmenich (S) Aroma for use in (S) 1-cyclohexene-1- Incorporated fragrance mixtures, propanal, 4,4- that in turn are dimethyl- used in perfumes, soaps, cleansers, etc. P-10-0498 08/10/10 11/07/10 CBI (G) Latent curing (S) Dodecanoic acid, agent for 3-[[3-[[[2,2- polyurethanes dimethyl-3-[(1- oxododecyl)oxy]propy lidene]amino]methyl]- 3,5,5- trimethylcyclohexyl] imino]-2,2- dimethylpropyl ester P-10-0499 08/10/10 11/07/10 CBI (G) Latent curing (S) Dodecanoic acid, agent for 1,6- poyurethanes hexanediylbis[nitril o(2,2-dimethyl-1- propanyl-3-ylidene)] ester [[Page 57773]] P-10-0500 08/11/10 11/08/10 CBI (G) Material for semi- (G) conductor Oxybiscarbomonocycli c acid, polymer with oxybis[heteropolycyc lic ketone],(alkyl(C=1-4 )-substituted bis [alkyl(C=2-5)amine], [halo(haloalkyl(C=1- 4)alkylidene]bis [aminocarbomonocycli calcohol] and [halo(haloalkyl(C=14 )alkyidene]bis (hydroxycarbomonocyc le)]bis[aminobenzami de],alkyl(C=1-4)este r P-10-0501 08/11/10 11/08/10 Xerox Corporation (G) Destructive use (G) Substituted (site limited pyridone intermediate) P-10-0502 08/12/10 11/09/10 Dow Chemical Company (S) Hardner for epoxy (G) Polymer of thermoset coating formaldehyde, systems diamine and phenol P-10-0503 08/12/10 11/09/10 Dow Chemical Company (S) Hardner for epoxy (G) Polymer of thermoset coating formaldehyde, systems diamine and phenol P-10-0504 08/13/10 11/10/10 ICl-IP America Inc. (S) Flame retardant (G) Phosphoric acid, on textiles metal salt P-10-0505 08/13/10 11/10/10 CBI (G) Component in (G) Alkoxylated alkyl industrial cleaner alcohol, ester with alknoenedioic acid, alkali metal salt P-10-0506 08/17/10 11/14/10 Coim USA, Inc. (S) Packaging (S) 1,3- adhesives benzenedicarboxylic acid, polymer with 2,2-dimethyl-1,3- propanediol, hexanedioic acid and 2,2'-oxybis[ethanol] P-10-0507 08/17/10 11/14/10 Avebe Inc. (S) Production aid (S) Starch, oxidized, for parent / sizing 2-hydroxy-3- emulsion for (trimethylammonio)pr application in paper opyl ether, chloride and paperboard P-10-0508 08/19/10 11/16/10 Emery Oleochemicals (G) Chemical (G) Mixed mono and di LLC intermediate carboxylic acids P-10-0509 08/19/10 11/16/10 Emery Oleochemicals (S) Polyester polyol (G) Ester polyol, LLC for polyurethane fatty acid ester ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings P-10-0510 08/19/10 11/16/10 Emery Oleochemicals (S) Polyester polyol (G) Ester polyol, LLC for polyurethane fatty acid ester ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings P-10-0511 08/19/10 11/16/10 Emery Oleochemicals (S) Polyester polyol (G) Ester polyol, LLC for polyurethane fatty acid ester ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings P-10-0512 08/19/10 11/16/10 Emery Oleochemicals (S) Polyester polyol (G) Ester polyol, LLC for polyurethane fatty acid ester ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings P-10-0513 08/19/10 11/16/10 Emery Oleochemicals (S) Polyester polyol (G) Ester polyol, LLC for polyurethane fatty acid ester ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings P-10-0514 08/19/10 11/16/10 Emery Oleochemicals (S) Polyester polyol (G) Ester polyol, LLC for polyurethane fatty acid ester ridged foam; polyester polyol for polyurethane flexible foam; polyester polyol for polyurethane coatings P-10-0515 08/18/10 11/15/10 CBI (S) Binder for paints (S) 2-propenoic acid, and coatings 2-methyl-, methyl ester, polymer with butyl 2-propenoate and N-(1,1-dimethyl- 3-oxobutyl)-2- propenamide P-10-0516 08/17/10 11/14/10 Cytec Industries Inc. (G) Coatings resin (G) Alkanoic acid ester, polymers with alkanolamine and substituted acrylate- blocked substituted polyalkylene- urethane polymer [[Page 57774]] P-10-0517 08/19/10 11/16/10 Dow Chemical Company (S) Surfactant for (S) Oxirane, 2-ethyl- architectural , polymer with coatings; surfactant oxirane, mono-C12 14- used in industrial sec-alkyl ethers metal cleaning solutions P-10-0518 08/19/10 11/16/10 Dow Chemical Company (S) Surfactant for (S) Oxirane, 2-ethyl- architectural , polymer with coatings; surfactant oxirane, mono-C11 15- used in industrial sec-alkyl ethers metal cleaning solutions P-10-0519 08/20/10 11/17/10 Coim USA, Inc. (S) Resin used to (S) Hexanedioic acid, make foam insulation polymer with 2,2- dimethyl-1,3- propanediol, 1,2- ethanediol and 1,6- hexanediol P-10-0520 08/20/10 11/17/10 Cognis Corporation (S) Agricultural (S) 1,2,3- pesticide inert propanetriol, adjuvant (to be hydrogen sulfate, FIFRA approved) ammonium salt P-10-0521 08/23/10 11/20/10 Wacker Chemical (G) Contained use (S) Siloxanes and Corporation (chemical silicones, di-me, intermediate, polymers with me ph consumed during silsesquioxanes, polymer grafting) methoxy-terminated P-10-0522 08/23/10 11/20/10 DIC International (G) Adhesive for (G) Polymer with (USA) LLC plastic films aromatic polycarboxylic acid, aliphatic polycarboxylic acid and aliphatic polyol P-10-0523 08/23/10 11/20/10 3M Company (S) Oil-and water- (G) Fluorochemical repellent agent for acrylate copolymer hard surfaces P-10-0524 08/24/10 11/21/10 Dow Chemical Company (G) Component of (G) Brominated polyurethane coating polyurethane prepolymer of MDI P-10-0525 08/24/10 11/21/10 Dow Chemical Company (G) Component of (G) Brominated polyurethane coating polyurethane prepolymer of MDI P-10-0526 08/25/10 11/22/10 Anderson Development (S) Powder coating (G) Methacrylate co- Company resin polymer P-10-0527 08/25/10 11/22/10 Anderson Development (S) Powder coating (G) Methacrylate co- Company resin polymer P-10-0528 08/25/10 11/22/10 CBI (G) Coatings (G) Urethane acrylate P-10-0529 08/26/10 11/23/10 Rhodia, Inc. (G) Oil field (G) Copolymer additive containing phosphonic, sulfonic and carboxylic acid groups P-10-0530 08/27/10 11/24/10 CBI (G) Polymer admixture (G) Polycarboxylate for cements polymer with alkenyloxyalkylol modified poly(oxyakylenediyl) , sodium salt P-10-0531 08/27/10 11/24/10 CBI (G) Unsaturated (G) Unsaturated polyester resin polyester resin P-10-0532 08/27/10 11/24/10 C. l. Hauthaway and (S) Wood primer / (G) Polyester based Sons Inc. seal coating- tannin aliphatic cationic stain blocker waterbased polyurethane P-10-0533 08/30/10 11/27/10 CBI (G) Interior and (G) Styrene / exterior coating acrylate copolymer additive P-10-0534 08/31/10 11/28/10 CBI (S) Coating (G) Substituted ingredient poly[oxy(methyl ethanediyl)], substituted[[[[trime thyl[[[[(oxopropenly l)oxy]ethoxy]carbony l]amino]cyclohexyl]m ethyl]amino]carbonyl [[[[[trimethyl[[[[(o xopropen1yl)oxy]etho xy]amino]cyclohexyl] methyl]amino]carbony l]oxy- P-10-0535 08/30/10 11/27/10 CBI (S) Textile coating (G) Propanoic acid, oxyalkylpropanoic acid, polymer with hydrazine, -hydro-- hydroxypoly[oxy(meth yl-1,2-ethanediyl)] and 5-isocyanato-1- (isocyanatomethyl)- alkylcyclohexane, compound with N,N- diethylethanamine P-10-0538 08/31/10 11/28/10 CBI (S) Textile coating (G) Propanoic acid, oxyalkylpropanoic acid, polymer with hydrazine, -hydro-- hydroxypoly[oxy(meth yl-1,2-ethanediyl)] and 5-isocyanato-1- (isocyanatomethyl)- alkylcyclohexane, compound with 2- (dimethylamino)ethan ol P-10-0539 08/31/10 11/28/10 CBI (G) Cathode in (G) Metal oxide batteries [[Page 57775]] P-10-0540 08/31/10 11/28/10 CBI (S) Textile coating (G) Propanoic acid, oxyalkylpropanoic acid, polymer with hydrazine, -hydro-- hydroxypoly[oxy(meth yl-1,2-ethanediyl)] and 5-isocyanato-1- (isocyanatomethyl)- alkylcyclohexane, compound with 2- (dimethylamino)ethan ol -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received: II. 1 Test Marketing Exemption Notices Received From: 07/30/10 to 08/31/10 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- T-10-0006 08/17/10 09/30/10 Cytec Industries Inc. (G) Coatings resin (G) Alkanoic acid ester, polymers with alkanolamine and substituted acrylate- blocked substituted polyalkylene- urethane polymer -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: III. 31 Notices of Commencement From: 7/30/10 to 8/31/10 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-08-0224 08/04/10 07/30/10 (G) Fluoroalkyl acrylate copolymer P-09-0147 08/04/10 07/08/10 (S) Formaldehyde, polymers with acetone-phenol reaction products and phenol, potassium sodium salts P-09-0293 08/20/10 07/29/10 (G) Phosphoric acid, mixed esters with partially fluorinated alcohol, ammonium salts P-09-0317 08/11/10 07/12/10 (S) Copper (2+), bis[N- [amino(imino- KN)methyl]urea-KO]-, nitrate (1:2) P-09-0334 08/09/10 07/30/10 (S) 8AH-2,4A- methanonaphthalene-8A-ol, octahydro-1,1,5,5- tetramethyl- P-09-0370 07/30/10 06/29/10 (G) Polyester modified MDI prepolymer P-09-0527 08/26/10 05/27/10 (G) Fatty acids, polymer with an aromatic diol, C18-unsaturated fatty acids dimers, epichlorohydrin and triethylenetetramine P-09-0556 08/17/10 07/26/10 (G) Modified ketal P-09-0614 08/13/10 08/02/10 (G) 2-propenoic acid, 2- methyl-, C12 15-branched and linear alkyl esters, polymers with alkyl methacrylates alkyl peroxide-initiated P-09-0645 08/27/10 08/20/10 (G) Substituted alkyl phosphate ester, ammonium salt P-10-0007 08/23/10 08/02/10 (G) Distillates (petroleum), light thermal cracked, reaction products with phenol, carboxylated, metal salts P-10-0023 08/23/10 08/06/10 (G) Benzenesulfonic acid, 4-amino, azo pigment P-10-0112 08/24/10 08/05/10 (G) Benzene dicarboxylic acid, polyester with glycol and polyethylene glycol P-10-0138 07/30/10 07/15/10 (G) Long chain alkylacrylate, homopolymers P-10-0139 07/30/10 07/15/10 (G) Long chain alkylacrylate, homopolymers P-10-0144 08/17/10 07/16/10 (G) Methyl-phenyl silicone resin with alkoxy groups P-10-0201 08/09/10 07/28/10 (G) Polyether polyurethane P-10-0205 08/11/10 07/21/10 (G) Poly(aryl ether) polymers P-10-0228 08/11/10 07/15/10 (G) Benzoic acid derivative P-10-0234 08/09/10 07/12/10 (S) 2-cyclopentene-1- acetic acid, 2-ethylbutyl ester P-10-0239 08/20/10 08/12/10 (S) 1,2,3-benzothiadiazole- 7-carboxylic acid P-10-0258 08/30/10 08/16/10 (G) Sulfonated heteropolycycle P-10-0259 08/30/10 08/16/10 (G) Sulfonated heteropolycycle P-10-0285 08/16/10 08/06/10 (S) Benzoic acid, 3-amino- 2-mercapto- P-10-0312 08/18/10 08/05/10 (S) 2,5-furandione, telomer with ethenylbenzene and (1- methylethyl)benzenem imides with polyethylene- polypropylene glycol 2- aminopropyl me ether P-10-0323 08/23/10 08/06/10 (G) Alkyl methacrylate polymer with branched benzene, alkyl acrylate, hydroxyalkyl methacrylate, methacrylic acid and substituted methacrylate, alkaline metal salt [[Page 57776]] P-10-0345 08/13/10 07/21/10 (G) Hexanoic acid, 6-[[2- [[5-[[2,7-dihydro-3- methyl-2,7-dioxo-1-(3- sulfobenzoyl)- heteropolycycle-6- yl]amino]-2,4- disulfophenyl]amino]-2- oxoethyl]amino]-, ammonium sodium salt (1:?:?) P-10-0346 08/13/10 07/21/10 (G) Copper, phthalic anhydride-2,3- pyridinedicarboxylic acid- urea reaction products complexes, aminosulfonylsulfo[[2-[[4- [(2-sulfoethyl)amino]-6- [(4-sulfophenyl)amino]- monoheterocycle-2- yl]amino]ethyl]amino]sulf onyl derivates, sodium salts P-10-0351 08/27/10 08/16/10 (G) Modified acrylonitrile, butadiene polymer, hydrogenated P-10-0352 08/23/10 08/02/10 (G) Benzene, isocyanatoalkyl-, polymer with diisocyanatoalkane, polyalkylene glycol alkyl ether-blocked P-10-0385 08/30/10 08/13/10 (G) Phosphonic acid, P,P- [[(4- substitutedl)amino]methyl ene]bis-,potassium salt (1:1) ---------------------------------------------------------------------------------------------------------------- List of Subjects Environmental Protection, Chemicals, Premanufacturer Notices. Dated: September 16, 2010. Chandler Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2010-23718 Filed 9-21-10; 8:45 am] BILLING CODE 6560-50-S