[Federal Register Volume 75, Number 201 (Tuesday, October 19, 2010)]
[Notices]
[Pages 64246-64247]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-26268]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-351-828]
Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From
Brazil: Correction to Notice of Antidumping Duty Order
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
DATES: Effective Date: October 19, 2010.
FOR FURTHER INFORMATION CONTACT: David Cordell or Ericka Ukrow, AD/CVD
Operations, Office 7, Import Administration, International Trade
Administration, U.S. Department of Commerce, 14th Street and
Constitution Avenue, NW., Washington, DC 20230; telephone: (202) 482-
0408 or (202) 482-0405, respectively.
Correction
On March 12, 2002, the Department published a notice of antidumping
duty order for certain hot-rolled flat-rolled carbon-quality steel
products from Brazil. See Antidumping Duty Order: Certain Hot-Rolled
Flat-Rolled Carbon-Quality Steel Products From Brazil, 67 FR 11093
(March 12, 2002) (``Order''). The Order states incorrectly that
``certain hot-rolled steel coil which meets the following chemical,
physical and mechanical specifications is outside and/or specifically
excluded from the scope of the order.''
Hot-rolled steel coil which meets the following chemical, physical
and mechanical specifications:
----------------------------------------------------------------------------------------------------------------
C Mn P S Si Cr Cu Ni
----------------------------------------------------------------------------------------------------------------
0.10-0.14% 0.90% Max. 0.025% Max. 0.005% Max. 0.30-0.50% 0.30-0.50% 0.20-0.40% 0.20% Max.
----------------------------------------------------------------------------------------------------------------
Width = 44.80 inches maximum; Thickness = 0.063-0.198 inches; Yield Strength = 50,000 ksi minimum; Tensile
Strength = 70,000-88,000 psi.
Hot-rolled steel coil which meets the following chemical, physical
and mechanical specifications:
[[Page 64247]]
----------------------------------------------------------------------------------------------------------------
C Mn P S Si Cr Cu Ni Mo
----------------------------------------------------------------------------------------------------------------
0.10-0.16% 0.70--0.90% 0.025% Max. 0.006% Max. 0.30-0.50% 0.30-0.50% 0.25% Max. 0.20% Max. 0.21% Max.
----------------------------------------------------------------------------------------------------------------
Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile
Strength = 105,000 psi Aim.
--------------------------------------------------------------------------------------------------------------------------------------------------------
C Mn P S Si Cr Cu Ni Nb Ca Al
--------------------------------------------------------------------------------------------------------------------------------------------------------
0.15% Max. 1.40% Max. 0.025% Max. 0.010% Max. 0.50% Max. 1.00% Max. 0.50% Max. 0.20% Max. 0.005% Min. Treated 0.01--0.70%
Max.
--------------------------------------------------------------------------------------------------------------------------------------------------------
Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses; 0.148 inches and 65,000 psi minimum for
thicknesses > 0.148 inches; Tensile Strength = 80,000 psi minimum. See Order at 11093, 11094.
In addition, the terminology in the ``scope of the order'' section
incorrectly uses the word ``agreement'' seven times instead of
referring to the ``order'' itself. The first four instances incorrectly
uses the phrase ``scope of this agreement.'' The final three
incorrectly state (1) ``subject to this agreement'' (2) ``covered by
this agreement'' and (3) ``under this agreement.''
The Order is hereby corrected to read that certain hot-rolled steel
coil which meets the following chemical, physical and mechanical
specifications is excluded from the scope of the order.\1\
---------------------------------------------------------------------------
\1\ See also the Antidumping Duty Order; Certain Hot-Rolled
Flat-Rolled Carbon-Quality Steel Products From Japan, 64 FR 34778
(June 29, 1999).
---------------------------------------------------------------------------
Hot-rolled steel coil which meets the following chemical, physical
and mechanical specifications:
----------------------------------------------------------------------------------------------------------------
C Mn P S Si Cr Cu Ni
----------------------------------------------------------------------------------------------------------------
0.10-0.14% 0.90% Max. 0.025% Max. 0.005% Max. 0.30-0.50% 0.50-0.70% 0.20-0.40% 0.20% Max.
----------------------------------------------------------------------------------------------------------------
Width = 44.80 inches maximum; Thickness = 0.063-0.198 inches; Yield Strength = 50,000 ksi minimum; Tensile
Strength = 70,000-88,000 psi.
Hot-rolled steel coil which meets the following chemical, physical
and mechanical specifications:
----------------------------------------------------------------------------------------------------------------
C Mn P S Si Cr Cu Ni Mo
----------------------------------------------------------------------------------------------------------------
0.10-0.16% 0.70--0.90% 0.025% Max. 0.006% Max. 0.30-0.50% 0.50-0.70% 0.25% Max. 0.20% Max. 0.21% Max.
----------------------------------------------------------------------------------------------------------------
Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile
Strength = 105,000 psi Aim.
Hot-rolled steel coil which meets the following chemical, physical
and mechanical specifications:
--------------------------------------------------------------------------------------------------------------------------------------------------------
C Mn P S Si Cr Cu Ni Nb Ca Al
--------------------------------------------------------------------------------------------------------------------------------------------------------
0.15% Max. 1.40% Max. 0.025% Max. 0.010% Max. 0.50% Max. 1.00% Max. 0.50% Max. 0.20% Max. 0.005% Min. Treated 0.01-0.07%
Max.
--------------------------------------------------------------------------------------------------------------------------------------------------------
Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thicknesses; 0.148 inches and 65,000 psi minimum for
thicknesses > 0.148 inches; Tensile Strength = 80,000 psi minimum. See Order at 11093, 11094.
The Order is hereby corrected to refer to itself as an ``order'' in
all cases where ``agreement'' was used in the ``scope of the order''
section of the Order.
This notice is published in accordance with section 777(i) of the
Tariff Act of 1930, as amended.
Dated: October 12, 2010
Ronald K. Lorentzen,
Deputy Assistant Secretary for Import Administration.
[FR Doc. 2010-26268 Filed 10-18-10; 8:45 am]
BILLING CODE 3510-DS-P