[Federal Register Volume 75, Number 213 (Thursday, November 4, 2010)]
[Notices]
[Page 67950]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-27888]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


The University of Georgia (UGA), et al.; Notice of Decision on 
Applications for Duty-Free Entry of Scientific Instruments

    This is a decision pursuant to Section 6(c) of the Educational, 
Scientific, and Cultural Materials Importation Act of 1966 (Pub. L. 89-
651, as amended by Pub. L. 06-36; 80 Stat. 897; 15 CFR part 301). 
Related records can be viewed between 8:30 a.m. and 5 p.m. in Room 
3720, U.S. Department of Commerce, 14th and Constitution Ave., NW., 
Washington, DC.
    Docket Number: 10-054. Applicant: The University of Georgia (UGA), 
Athens, GA 30602-7229. Instrument: HV Pneumatic Quadrant Beam Position 
Monitor with I404 Quad Current Integrator. Manufacturer: FMB Oxford 
Limited, United Kingdom. Intended Use: See notice at 75 FR 57738, 
September 22, 2010. Comments: None received. Decision: Approved. 
Reasons: The instrument must meet the following specifications: an 11 
mm diameter beam aperture, a He leak rate of < 2 x 10[caret] - 8 mbar 
I/sec, HV compatible to < 5 x 10 - 7 mbar vacuum, an operational range 
of 2 bar to 7 bar, a 6 mm pneumatic air connection, and a 24 VCD (1.2W) 
at 50 mA solenoid with flying leads. We know of no instruments of 
equivalent scientific value to the foreign instruments described below, 
for such purposes as this is intended to be used, that was being 
manufactured in the United States at the time of its order.
    Docket Number: 10-059. Applicant: University of Chicago, LLC, 
Lemont, IL 60439. Instrument: Micropitting Test Machine. Manufacturer: 
Primelia Consulting Services Limited, United Kingdom. Intended Use: See 
notice at 75 FR 57738, September 22, 2010. Comments: None received. 
Decision: Approved. Reasons: The instrument has capabilities that are 
tailored for the specific micropitting analysis, specifically the 
accelerometer measurement to monitor for onset of fatigue failure. The 
instrument also has three points of contact which will increase the 
speed at which tests are made. We know of no instruments of equivalent 
scientific value to the foreign instruments described below, for such 
purposes as this is intended to be used, that was being manufactured in 
the United States at the time of its order.

    Dated: October 29, 2010.
Gregory W. Campbell,
Acting Director, Subsidies Enforcement Office, Import Administration.
[FR Doc. 2010-27888 Filed 11-3-10; 8:45 am]
BILLING CODE 3510-DS-P