[Federal Register Volume 75, Number 217 (Wednesday, November 10, 2010)]
[Notices]
[Page 69049]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-28416]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Georgia Institute of Technology, et al.; Notice of Consolidated 
Decision on Applications for Duty-Free Entry of Electron Microscopes

    This is a decision consolidated pursuant to Section 6(c) of the 
Educational, Scientific, and Cultural Materials Importation Act of 1966 
(Pub. L. 89-651, as amended by Public Law 106-36; 80 Stat. 897; 15 CFR 
part 301). Related records can be viewed between 8:30 a.m. and 5 p.m. 
in Room 3720, U.S. Department of Commerce, 14th and Constitution 
Avenue, NW., Washington, DC.
    Docket Number: 10-061. Applicant: Georgia Institute of Technology, 
Atlanta, GA 30333-0245. Instrument: Electron Microscope. Manufacturer: 
FEI Company, the Netherlands. Intended Use: See notice at 75 FR 62763, 
October 13, 2010.
    Docket Number: 10-062. Applicant: Washington State University, 
Pullman, WA 99164-1020. Instrument: Electron Microscope. Manufacturer: 
FEI Company, Czech Republic. Intended Use: See notice at 75 FR 62763, 
October 13, 2010.
    Docket Number: 10-063. Applicant: National Institutes of Health, 
Bethesda, MD 20892-8025. Instrument: Electron Microscope. Manufacturer: 
JEOL Limited, Japan. Intended Use: See notice at 75 FR 62723, October 
13, 2010.
    Comments: None received. Decision: Approved. No instrument of 
equivalent scientific value to the foreign instrument, for such 
purposes as these instruments are intended to be used, was being 
manufactured in the United States at the time the instruments were 
ordered. Reasons: Each foreign instrument is an electron microscope and 
is intended for research or scientific educational uses requiring an 
electron microscope. We know of no electron microscope, or any other 
instrument suited to these purposes, which was being manufactured in 
the United States at the time of order of each instrument.

    Dated: November 3, 2010.
Richard Herring,
Acting Director, Subsidies Enforcement Office, Import Administration.
[FR Doc. 2010-28416 Filed 11-9-10; 8:45 am]
BILLING CODE 3510-DS-P