[Federal Register Volume 75, Number 226 (Wednesday, November 24, 2010)]
[Notices]
[Pages 71688-71693]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-29674]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2010-0880; FRL-8852-1]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Under sections 5(d)(2) and 5(d)(3) of the Toxic Substances
Control
[[Page 71689]]
Act (TSCA), EPA is required to publish in the Federal Register a notice
of receipt of a premanufacture notice (PMN) or an application for a
test marketing exemption (TME), and to publish in the Federal Register
periodic status reports on the new chemicals under review and the
receipt of notices of commencement (NOC) to begin the manufacture of
those chemicals. This document covers the period from September 20,
2010, to October 8, 2010, and provides the required notice and status
report for the PMNs and TMEs, both pending or expired, and the NOCs to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments must be received on or before December 27, 2010.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2010-0880, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding
legal holidays. The telephone number for the DCO is (202) 564-8930.
Such deliveries are only accepted during the DCO's normal hours of
operation, and special arrangements should be made for deliveries of
boxed information.
Instructions: EPA's policy is that all comments received will be
included in the docket without change and may be made available on-line
at http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov Web site is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail directly to EPA without going through regulations.gov, your e-mail
address will be automatically captured and included as part of the
comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the docket index
available at http://www.regulations.gov. Although listed in the index,
some information is not publicly available, e.g., CBI or other
information whose disclosure is restricted by statute. Certain other
material, such as copyrighted material, will be publicly available only
in hard copy. Publicly available docket materials are available
electronically at http://www.regulations.gov, or, if only available in
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding
legal holidays. The telephone number of the EPA/DC Public Reading Room
is (202) 566-1744, and the telephone number for the OPPT Docket is
(202) 566-0280. Docket visitors are required to show photographic
identification, pass through a metal detector, and sign the EPA visitor
log. All visitor bags are processed through an X-ray machine and
subject to search. Visitors will be provided an EPA/DC badge that must
be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: For technical information contact:
Bernice Mudd, Information Management 7407M, Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 564-8951; fax number: (202) 564-8955; e-mail address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the particular PMN or TME
addressed in this document. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit CBI to EPA through regulations.gov
or e-mail. Clearly mark the part or all of the information that you
claim to be CBI. For CBI information in a disk or CD-ROM that you mail
to EPA, mark the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information marked as CBI will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
[[Page 71690]]
II. Why is EPA taking this action?
EPA classifies chemical substances as either ``existing'' chemicals
or ``new'' chemicals. Any substance that is not on EPA's TSCA Chemical
Substances Inventory, commonly referred to as the the TSCA Inventory,
is classified as a ``new chemical,'' while those that are on the TSCA
Inventory are classified as an ``existing chemical.'' For more
information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture
or import a new chemical substance for a non-exempt commercial purpose
is required by section 5 of TSCA to provide EPA with a premanufacture
notice, or PMN, before initiating the activity. Section 5(h)(1)
authorizes EPA to allow persons, upon application, to manufacture
(includes import) or process a new chemical substance, or a chemical
substance subject to a significant new use rule (SNUR) issued under
TSCA section 5(a), for ``test marketing'' purposes, which is referred
to as a test marketing exemption, or TME. For more information about
the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems/.
Under TSCA sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to
publish in the Federal Register a notice of receipt of a PMN or an
application for a TME and to publish in the Federal Register periodic
status reports on the new chemicals under review and the receipt of the
NOCs to begin the manufacture of those chemicals. This document, covers
the period from September 20, 2010 to October 8, 2010, and provides the
required notice and status report for the PMNs and TMEs, both pending
or expired, and the NOCs to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Reports
In Table I. of this Unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer; the potential
uses identified by the manufacturer/importer in the PMN, and the
chemical identity.
Table I--Premanufacture Notices Received From: 9/21/10 to 10/08/10
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received review end Manufacturer/ Use Chemical
date date importer
----------------------------------------------------------------------------------------------------------------
P-10-0571........... 09/21/10 12/19/10 CBI................. (G) Inhibitor for (G) Quaternary
oil applications. ammonium compound.
P-10-0572........... 09/22/10 12/20/10 CBI................. (S) Coatings for (G)
leather; water Hexamethylenediisoc
borne industiral yanate homopolymer,
coatings like wood. alkoxy-terminated.
P-10-0573........... 09/23/10 12/21/10 CBI................. (G) Polyurethane (G) Thermoplastic
(open, polyurethane.
nondispersive).
P-10-0574........... 09/23/10 12/21/10 CBI................. (G) Additive, open, (G) Polyisocyanate,
non-dispersive use. reaction product
with polyalkylene
oxide.
P-10-0575........... 09/27/10 12/25/10 Eastman Kodak (S) Polymer used in (G) Methacrylic acid
Company. manufacture of polymer with
imaging media/ isoalkylmethacrylam
products; for ide,
export. arylmethacrylate,
and
alkenylmethacrylate
.
P-10-0576........... 09/27/10 12/25/10 CBI................. (S) A surfactant in (G)
hard surface Alkyloxypropylimino
cleaning detergent; dipropionic acid,
laundry detergent. monosodium salt.
P-10-0577........... 09/27/10 12/25/10 CBI................. (G) Anti-friction (G) Polyamideimide.
coating.
P-10-0578........... 09/27/10 12/25/10 CBI................. (G) Used in (G)
industrial coatings. Alkylenealkanedioic
acid, polymer with
alkenylbenzene and
alkenenitrile,
ammonium salt,
alkylhydroperoxide-
initiated.
P-10-0579........... 09/27/10 12/25/10 CBI................. (S) An isocyanate (G) Aromatic
for adhesives isocyanate, polymer
formulations. with alkoxides and
diol.
P-10-0580........... 09/27/10 12/25/10 CBI................. (G) Hole injection (G)
layer in a Hetromonocyclic[3,4-
polylmeric b]thiophene,
photovoltaic module. homopolymer, 2-[1-
[difluoro[(1,2,2-
trifluoroethenyl)ox
y]methyl]-1,2,2,2-
tetrafluoroethoxy]-
1,1,2,2-
tetrafluoroethyoxy]-
1,1,2,2-
tetrafluoroethanesu
lfonic acid-
tetrafluoroethylene
polyer-doped.
P-10-0581........... 09/29/10 12/27/10 CBI................. (G) Anti-caking (S) Iron, isomerized
agent. tartarate sodium
complexes.
P-10-0582........... 09/28/10 12/26/10 CBI................. (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesive. The polymer.
predicted volume
for every
application is same
for all 6 chemical
substances. The
production is same
for all 6
substances.
P-10-0583........... 09/28/10 12/26/10 CBI................. (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesive. The polymer.
predicted volume
for every
application is same
for all 6 chemical
substances. The
production is same
for all 6
substances.
[[Page 71691]]
P-10-0584........... 09/28/10 12/26/10 CBI................. (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesive. The polymer.
predicted volume
for every
application is same
for all 6 chemical
substances. The
production is same
for all 6
substances.
P-10-0585........... 09/28/10 12/26/10 CBI................. (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesive. The polymer.
predicted volume
for every
application is same
for all 6 chemical
substances. The
production is same
for all 6
substances.
P-10-0586........... 09/28/10 12/26/10 CBI................. (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesive. The polymer.
predicted volume
for every
application is same
for all 6 chemical
substances. The
production is same
for all 6
substances.
P-10-0587........... 09/28/10 12/26/10 CBI................. (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesive. The polymer.
predicted volume
for every
application is same
for all 6 chemical
substances. The
production is same
for all 6
substances.
P-10-0588........... 09/29/10 12/27/10 CBI................. (S) Precursor to (S) Benzenamine,
polyimide resin 4,4'-[1,3-
used in aircraft phenylenebis(1-
material; precursor methylethylidene)]b
to polyimide resin is-.
used in electronic
and it material.
P-10-0589........... 09/30/10 12/28/10 CBI................. (G) Plasticizer for (G) Dibasic acid
resin. ester.
P-10-0590........... 09/28/10 12/26/10 CBI................. (G) Component/ (G) Modified ketal
additive in polymer ester.
resins.
P-10-0591........... 09/30/10 12/28/10 CBI................. (G) Adhesive system (G)
component. Methylenebis[isocya
natobenzene],
polymer with
alkanedioic acid,
alkylene glycols,
alkoxylated
alkanepolyol and
substituted
trialkoxysilane.
P-10-0592........... 09/28/10 12/26/10 Cytec Industries Inc (G) Coating resin... (G) Fatty acids,
polymer with
substituted
carbopolycycle,
substuted
alkylamines,
substituted
alkyleneoxide and
glycidyl alkanoate,
substituted
alkanoic acid
(salts).
P-10-0593........... 09/29/10 12/27/10 CBI................. (G) Adhesive (G) Modified starch.
ingredient.
P-11-0001........... 10/01/10 12/29/10 CBI................. (G) Crosslinking (G) Aromatic
agent for coatings. polyisocyanate,
aliphatic polyol
blocked.
P-11-0002........... 10/01/10 12/29/10 CBI................. (G) Crosslinking (G) Aromatic
agent for coatings. polyisocyanate,
aliphatic polyol
blocked.
P-11-0003........... 10/01/10 12/29/10 CBI................. (G) Crosslinking (G) Aromatic
agent for coatings. polyisocyanate,
aliphatic polyol
blocked.
P-11-0004........... 10/01/10 12/29/10 CBI................. (G) Crosslinking (G) Aromatic
agent for coatings. polyisocyanate,
aliphatic polyol
blocked.
P-11-0005........... 10/01/10 12/29/10 CBI................. (G) Crosslinking (G) Aromatic
agent for coatings. polyisocyanate,
aliphatic polyol
blocked.
P-11-0006........... 10/01/10 12/29/10 CBI................. (G) Crosslinking (G) Aromatic
agent for coatings. polyisocyanate,
aliphatic polyol
blocked.
P-11-0007........... 10/01/10 12/29/10 Organic Dyestuffs (S) Leather dye for (S) 2,7-
Corporation. distribution; other naphthalenedisulfon
dyeing applications ic acid, 4-amino-6-
as needed. [[4-[[[4-[(2,4-
diaminophenyl)azo]p
henyl]amino]sulfony
l]phenyl]azo]-5-
hydroxy-3-[(4-
nitrophenyl)azo]-,
dipotassium salt.
P-11-0008........... 10/01/10 12/29/10 CBI................. (G) Component in (G) Modified ketal
resins. ester.
P-11-0009........... 10/04/10 01/01/11 Interchem, Inc...... (S) Water soluble (G) Alkoxylated
corrosion inhibitor. imidazoline.
P-11-0010........... 10/04/10 01/01/11 CBI................. (S) Resin for (G) Fatty acid
coatings, stains, modified polyester
primes and lacquers. aliphatic
polyurethane
dispersion.
P-11-0011........... 10/05/10 01/02/11 Dic International (G) Adhesive........ (G) Polyol blocked
(USA) LLC. cycloaliphatic
amine polymer.
[[Page 71692]]
P-11-0012........... 10/07/10 01/04/11 CBI................. (G) A polymer used (G) 2-propenoic
in a concrete acid, 2-methyl-,
admixture which telomer with 2-
retains workability propenoic acid and
by retaining slump sodium phosphinate
in concrete precast (1:1), ester with
applications. polyethylene
glycol,
peroxydisulfuric
acid
([ho)s(o)2]2o2)sodi
um salt (1:2)-
initiated.
P-11-0013........... 10/05/10 01/02/11 Cytec Industries Inc (G) Coatings resin.. (G) Alkyl dioic
acid, polymer with
substituted
alkanoate, alkyl
diisocyanate,
alkyldiol, and
substituted
alkanoic acid.
P-11-0014........... 10/05/10 01/02/11 Goulston (G) Component of (G) Alkyl amine
Technologies, Inc. lubricant for salt.
finish product for
fiber and yarn.
P-11-0015........... 10/06/10 01/03/11 CBI................. (S) Ingredient for (S)
fragrance Cyclohexanepentanol
production. , -methyl-.
----------------------------------------------------------------------------------------------------------------
In Table II. of this Unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received by EPA during this period: The EPA case number assigned to the
TME, the date the TME was received by EPA, the projected end date for
EPA's review of the TME, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the TME, and
the chemical identity.
Table II--Test Marketing Exemption Notices Received From: 09/21/10 to 10/08/10
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date review end Manufacturer/ Use Chemical
date importer
----------------------------------------------------------------------------------------------------------------
T-10-0009........... 09/28/10 11/11/10 Cytec Industries (G) Coating resin. (G) Fatty acids,
Inc.. polymer with
substituted
carbopolycycle,
substituted
akylamines,
substituted
akylneoxide and
glycidyl
alkenoate,
substituted
alkanoic acid
(salts).
T-11-0001........... 10/05/10 11/18/10 Cytec Industries (G) Coating resin. (G) Alkyl dioic
Inc.. acid, polymer
with substituted
alkanoate, alkyl
diisocyanate,
alkyldiol, and
substituted
alkanoic acid.
----------------------------------------------------------------------------------------------------------------
In Table III. of this Unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and the chemical identity.
Table III--Notices of Commencement From: 9/21/10 to 10/08/10
------------------------------------------------------------------------
Commencement
Case No. Received date notice review Chemical
end date
------------------------------------------------------------------------
P-00-0129........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
compound with 2-
aminoethanol (1:3).
P-00-0130........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
compound with 2-
aminoethanol (1:4).
P-00-0131........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
sodium salt.
P-00-0135........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
tetrasodium salt.
P-00-0136........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
potassium salt.
P-00-0139........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
tripotassium salt.
P-00-0140........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
tetrapotassium salt.
P-00-0144........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
magnesium salt
(1:2).
P-00-0146........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-,
magnesium sodium
salt (1:1:2).
P-00-0153........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-
sodium salt,
compound with 2-
aminoethanol.
P-00-0154........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-
monosodium salt,
compound with 2-
aminoethanol (1:3).
P-00-0155........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-
disodium salt,
compound with 2-
aminoethanol (1:2).
P-00-0156........ 10/01/10 09/07/10 (S) L-aspartic acid,
N,N'-1,2-
ethanediylbis-
trisodium salt,
compound with 2-
aminoethanol (1:1).
P-07-0353........ 10/07/10 08/28/10 (G) Alkyl acid
fluoride.
P-08-0486........ 10/05/10 09/17/10 (G) Polymer with
.alpha.-hydro-
.omega.-
hydroxypoly[oxy(meth
yl-1,2-ethanediyl)],
3-hydroxy-2-
(hydroxymethyl)-2-
methylpropanoic acid
and
alkyldiisocyanate,
ammonium salt.
P-09-0083........ 10/04/10 09/03/10 (G) Cationic
polyamide.
P-09-0084........ 09/22/10 09/02/10 (G) Benzenesulfonic
acid salt.
[[Page 71693]]
P-09-0146........ 10/01/10 09/28/10 (S) Formaldehyde,
polymers with
acetone-phenol
reaction products
and phenol, sodium
salts.
P-09-0288........ 09/22/10 08/21/10 (G) Alkyl
silsesquioxanes.
P-09-0430........ 10/04/10 09/14/10 (G) Polymeric monoazo
compound.
P-09-0431........ 10/04/10 09/14/10 (G) Polymeric monoazo
compound.
P-09-0432........ 10/04/10 09/14/10 (G) Polymeric monoazo
triphenylmethane.
P-09-0433........ 10/04/10 09/14/10 (G) Polymeric
triphenylmethane.
P-09-0558........ 09/27/10 09/10/10 (G) Modified ketal.
P-09-0610........ 09/22/10 09/01/10 (G) Alkylbenzene
sulfonic acid.
P-10-0050........ 09/29/10 08/30/10 (G) Amine salt.s of
fatty acids.
P-10-0128........ 09/23/10 08/02/10 (S) Siloxanes and
silicones, di-me, 3-
hydroxypropyl group-
terminated,
ethoxylated,
polymers with 1,6-
diisocyanato-2,2,4-
trimethylhexane, 1,6-
diisocyanato-2,4,4-
trimethylhexane,
polypropylene glycol
ether with glycerol
(3:1) and
polypropylene glycol
ether with
pentaerythritol
(4:1), polypropylene
glycol mono-bu ether-
blocked.
P-10-0133........ 09/29/10 09/21/10 (G) Alkyl sulfide,
manuf. of, by-
products from,
distn. lights.
P-10-0186........ 09/27/10 09/08/10 (G) Alkyl phosphate
salt.
P-10-0293........ 09/21/10 08/23/10 (G) Methacrylate
copolymer.
P-10-0306........ 09/30/10 08/31/10 (G) Unsaturated
polyester resin.
P-10-0325........ 10/07/10 09/20/10 (G) Neodymium ziegler-
natta catalyst.
P-10-0388........ 10/06/10 08/23/10 (G) 2-propenoic acid,
2-methyl-, polymer
with alkyl 2-
propenoates, ethenyl
acetate and methyl-2-
methyl-2-propenoate.
P-10-0389........ 10/04/10 09/08/10 (G) Amino acid, N-(2-
aminoalkyl)-, salt.
(1:1), polymers with
cycloaliphatic
diamine,
alkyldiisocyanate,
alpha-hydro-omega-
hydroxy(alkyldiyl)
and polyalkyl glycol
mono alkyl ether
blocked,
alkyldiisocyanate-
aromatic
diisocyanate,
polyalkyl glycol
mono alkyl ether
blocked.
P-10-0394........ 10/07/10 09/28/10 (G) Aromatic
carboxylic acid.
P-10-0395........ 10/07/10 10/01/10 (G) Organic
carboxylic acid.
P-10-0417........ 09/22/10 09/21/10 (S) Amines, C36-
alkylenedi-,
polymers with 5,5'-
[(1-
methylethylidene)bis
(4,1-
phenyleneoxy)]bis[1,
3-
isobenzofurandione],
maleated.
P-10-0430........ 10/06/10 09/28/10 (G) Urethane
acrylate.
------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact the person listed under FOR FURTHER INFORMATION
CONTACT to access additional non-CBI information that may be available.
List of Subjects
Environmental protection, Chemicals, Hazardous substances, Imports,
Notice of commencement, Premanufacturer, Reporting and recordkeeping
requirements, Test marketing exemptions.
Dated: November 17, 2010.
Darryl S. Ballaard,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2010-29674 Filed 11-23-10; 8:45 am]
BILLING CODE 6560-50-P