[Federal Register Volume 75, Number 237 (Friday, December 10, 2010)]
[Proposed Rules]
[Pages 76935-76940]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-30994]


-----------------------------------------------------------------------

DEPARTMENT OF STATE

22 CFR Part 121

RIN 1400-AC78
[Public Notice: 7257]


Revisions to the United States Munitions List

AGENCY: Department of State.

ACTION: Advance notice of proposed rulemaking.

-----------------------------------------------------------------------

SUMMARY: As part of the President's export control reform initiative, 
the Directorate of Defense Trade Controls (DDTC) seeks public comment 
on revisions to the United States Munitions List (USML) that would make 
it a ``positive list'' of controlled defense articles, requests that 
the public ``tier'' defense articles based on the Administration's 
three-tier control criteria, and identify those current defense 
articles that the public believes do not fall within the scope of any 
of the criteria's tiers. A ``positive list'' is a list that describes 
controlled items using objective criteria rather than broad, open-
ended, subjective, or design intent-based criteria. DDTC is not seeking 
with this advance notice of proposed rulemaking (ANPRM) input on 
whether particular defense articles should or should not be controlled 
on the USML or whether any defense articles should be controlled 
differently. Rather, it is only seeking with this ANPRM input on how 
the USML can be revised so that it clearly describes what is subject to 
the jurisdiction of the International Traffic in Arms Regulations 
(ITAR), how defense articles are identified by tier, and what current 
defense articles do not fall within the scope of any of the tiers. 
Guidelines for revision of the USML toward this end are provided in 
this ANPRM. Please see the proposed rule published elsewhere in this 
issue of the Federal Register for an example of a USML Category that 
has been revised in this manner.

DATES: Comments must be received by February 8, 2011.

ADDRESSES: Interested parties may submit comments within 60 days of the 
date of the publication by any of the following methods:
     E-mail: [email protected] with the subject line, 
``USML--Positive List.''
     Mail: PM/DDTC, SA-1, 12th Floor, Directorate of Defense 
Trade Controls, Office of Defense Trade Controls Policy, ATTN: USML--
Positive List, Bureau of Political Military Affairs, U.S. Department of 
State, Washington, DC 20522-0112.
     Persons with access to the Internet may also view this 
ANPRM by searching for its RIN on the U.S. Government regulations Web 
site at http://regulations.gov/index.cfm.

FOR FURTHER INFORMATION CONTACT: Director Charles B. Shotwell, Office 
of Defense Trade Controls Policy, Department of State, Telephone (202) 
663-2792 or Fax (202) 261-8199; E-mail [email protected], 
ATTN: USML--Positive List.

SUPPLEMENTARY INFORMATION: 

Existing Controls

    The Directorate of Defense Trade Controls (DDTC), U.S. Department 
of State, administers the International Traffic in Arms Regulations 
(ITAR) (22 CFR parts 120-130). The items subject to the jurisdiction of 
the ITAR, i.e., ``defense articles,'' including related technical data, 
and ``defense services,'' are identified on the ITAR's U.S. Munitions 
List (USML) (22 CFR 121.1). With few exceptions, items that are not 
subject to the export control jurisdiction of the ITAR are subject to 
the jurisdiction of the Export Administration Regulations (EAR), 15 CFR 
Parts 730-774. The Bureau of Industry and Security (BIS), U.S. 
Department of Commerce, administers the EAR, which include the Commerce 
Control List (CCL) (15 CFR part 774). The descriptions in many USML 
categories are general and include design intent as a reason for an 
item to be controlled. The descriptions in most CCL categories are 
specific and generally include technical parameters for an item to be 
controlled.

Export Control Reform

    A key part of the Administration's Export Control Reform effort is 
to review and revise both the ITAR and the CCL to enhance national 
security so that they: (1) Are ``tiered'' consistent with the criteria 
the U.S. Government has established to distinguish the types of items 
that should be controlled at different levels for different types of 
destinations, end-uses, and end-users; (2) create a ``bright line'' 
between the two lists to clarify jurisdictional determinations and 
reduce government and industry uncertainty about whether a particular 
item is subject to the jurisdiction of the ITAR or the EAR; and (3) are 
structurally ``aligned'' so that they can eventually be combined into a 
single control list.
    The Administration has determined that these changes are necessary 
to better focus its resources on protecting those items that need to be 
protected, to end jurisdictional confusion between the ITAR and EAR, 
and to provide clarity to make it easier for exporters to comply with 
the regulations and for the U.S. Government to administer and enforce 
them.
    In order to accomplish the three above-referenced tasks 
simultaneously, the USML and, to a lesser degree, the CCL must be 
revised so that they are aligned into ``positive lists.'' A ``positive 
list'' is one that describes controlled items using objective criteria 
such as horsepower, microns, wavelength, speed, accuracy, hertz or 
other precise descriptions rather than broad, open-ended, subjective, 
or design intent-based criteria.
    The U.S. Government has developed a methodology to transition the 
current control lists to this new structure. This methodology includes 
guidance on how to articulate the parameters for the items controlled 
and criteria to be used to screen these items to determine their tier 
of control. The full draft methodology that was developed for internal 
use by the U.S. Government was provided to the Department of State's 
Defense Trade Advisory Group (DTAG) as well as to the Department of 
Commerce's Technical Advisory Committees as it was being finalized. The 
full text is not included in this notice, as aspects are beyond the 
scope of the request for public comment; however, the full text is 
available for public review on the DDTC Web page at http://www.pmddtc.state.gov/DTAG/index.html.
    This notice provides a summary of the full methodology and the full 
text of its guidance for building a ``positive'' list to order to 
request input from the public on this key feature of the control list 
reform.

Request for Comments

    As the U.S. Government continues its work on preparing proposed 
revisions to the USML, it seeks public input on how best to describe 
the USML in a positive

[[Page 76936]]

manner. U.S. companies, trade associations, and individuals that 
produce, market, or export USML-controlled defense articles are 
generally well positioned to describe their articles positively and to 
provide comments on what are and are not clear descriptions of controls 
over the articles. Public comment at this stage of the USML review 
process also ensures that affected industry sectors have the 
opportunity to contribute and comment on a key element of Export 
Control Reform.
    The U.S. Government is not, at this time, seeking public comment on 
whether an item should or should not be controlled on the USML; 
however, the public is requested to identify those defense articles 
that it believes do not fall within the scope of any of the criteria's 
tiers. The U.S. Government is also not seeking public comment at this 
time on whether an item should be controlled differently for export to 
different countries. General comments on the overall reform process or 
the other aspects of current export controls are outside the scope of 
this inquiry. In order to contribute directly to export control reform, 
all comments are strongly encouraged to abide by the detailed 
guidelines provided in this notice.
    BIS will publish a separate request for public comments on (1) how 
to describe items controlled on CCL more clearly and in a more 
``positive'' ``tiered'' manner and (2) the availability of certain 
items outside of certain destinations.
    The following is a summary of the specific requests for public 
comment described in this notice:
     Public comments should be provided on a category-by-
category basis.
     Within each category, public input should be further 
identified by groups A thru E as further described below.
     Public input should describe defense articles in a 
``positive'' way:
    1. Use objective criteria or thresholds, such as precise 
descriptions or technical parameters, that do not lend themselves to 
multiple interpretations by reasonable people.
    2. Descriptions should not contain any (a) controls that use 
generic labels for ``parts,'' ``components,'' ``accessories,'' 
``attachments,'' or ``end-items'' or (b) other types of controls for 
specific types of defense articles because, for example, they were 
``specifically designed or modified'' for a defense article, but should 
contain identification of those ``parts,'' ``components,'' 
``accessories,'' ``attachments,'' or ``end-items'' that do warrant 
enumerated control on the USML. Separately, the use of ``specially 
designed'' as a control criterion for the other ``parts,'' 
``components,'' ``accessories,'' ``attachments,'' or ``end-items'' 
should only be applied when required by multilateral obligations or 
when no other reasonable option exists.
    3. Items are not to be listed on both the CCL and the USML unless 
there are specific technical or other objective criteria--regardless of 
the reason why any particular item was designed or modified--that 
distinguish between when an item is USML-controlled or when it is CCL-
controlled.
    4. In cases where technical characteristics are classified and need 
to be protected, the objective descriptions of the products controlled 
should be set at an unclassified level below the classified level.
    5. Public input should include the recommended tier of control for 
the defense articles described using the tiering criteria in Part IV, 
Step 4 of the Guidelines in this notice.
    6. The public is also requested to identify any current defense 
articles that do not fall within the scope of any of the criteria's 
tiers, and provide an explanation why they believe that such items are 
not within the scope of the criteria.

The U.S. Government's Work on the USML

    The U.S. Government has already begun reviewing and revising the 
USML. The State Department published as a proposed rule elsewhere in 
this issue of the Federal Register a proposed revision to USML Category 
VII, which pertains to tanks and military vehicles. As members of the 
public prepare their comments on how to revise other USML categories 
into positive lists, they should use this revised Category VII as a 
guide for the level and type of detail the U.S. Government is seeking 
to develop in the remaining USML categories other than Category XVII 
(Classified Articles, Technical Data and Defense Services Not Otherwise 
Enumerated) and Category XXI (Miscellaneous Articles).

Guidelines

I. Introduction

    This notice describes the background to and the process by which 
the U.S. Government is reviewing and, as appropriate, revising the two 
primary lists of items it controls--the USML and the CCL. The review 
and revision are part of Phase II of the broad, three-phased Export 
Control Reform effort. A summary of the control list work and the three 
phase reform effort is available at the White House Web page at http://www.whitehouse.gov/the-press-office/2010/08/30/president-obama-lays-foundation-a-new-export-control-system-strengthen-n. ``Items,'' for 
purposes of this notice, are (a) physical things such as goods, 
products, materials, commodities, end-items, parts, components, and 
defense articles; (b) technology and technical data; and (c) software. 
The types of services and other transactions, licensing policies, and 
the lists of destinations, end-uses, and end-users that are subject to 
export controls, and the efforts to review and revise them, will be 
described in separate documents.

II. Goals of the Phase II Control List Review and Revision Effort

    The purpose of the control list review effort is to enhance 
national security by reviewing and revising the USML and the CCL so 
that they:
    1. Are ``tiered'' consistent with the criteria the U.S. Government 
has established to distinguish the types of items that should be 
controlled at different levels for different types of destinations, 
end-uses, and end-users (``Criteria,'' detailed below);
    2. Create a ``bright line'' between the two lists to clarify 
jurisdictional determinations and reduce government and industry 
uncertainty about whether particular items are subject to the 
jurisdiction of the International Traffic in Arms Regulations (ITAR) or 
the Export Administration Regulations (EAR); and
    3. Are structurally ``aligned'' so that they later can eventually 
be combined into a single control list.
    In order to accomplish these tasks simultaneously, the USML and, to 
a lesser degree, the CCL must be revised so that they are aligned into 
``positive lists.'' A ``positive list'' is a list that describes 
controlled items using objective criteria such as horsepower, microns, 
wavelength, speed, accuracy, hertz or other precise descriptions rather 
than broad, open-ended, subjective, catch-all, or design intent-based 
criteria.

III. Background to the Control List Review and Revision Effort

    A key element of Export Control Reform is that all items on the 
USML and the CCL must be screened against the Criteria the U.S. 
Government has developed to determine new control levels consistent 
with contemporary national security threats and other issues.
    The basic premise of the effort is that if an item type falls 
within the scope of one of the Criteria's three tiers, the item should 
be controlled for export, reexport, and in-country transfer at the

[[Page 76937]]

level set forth in the licensing policy the U.S. Government is 
developing for that tier. The licensing policies to be assigned to each 
tier are still under development but, generally, the highest tier of 
control will carry the most comprehensive license and compliance 
requirements.
    If an item is determined not to be within the scope of any of the 
three tiers, it should not be on a control list. (Items that do not 
meet one of the primary elements of the tiered criteria, such as being 
significant for maintaining a military or intelligence advantage, which 
must nonetheless be controlled for a separate foreign policy, 
statutory, or multilateral obligation, will be identified as Tier 3 
items.)
    The U.S. Government has also determined that, during Phase II, the 
USML and the CCL should be revised and aligned so that there is a clear 
jurisdictional ``bright line'' between the items subject to the control 
of the ITAR and the control of the EAR.
    The U.S. Government is committed to creating a clear jurisdictional 
``bright line'' so that exporters and foreign parties can more easily 
and consistently determine whether many types of commodities, 
technologies, and software--and directly related services--are subject 
to the ITAR or the EAR.
    The creation of a ``bright line'' is also a vital interim step in 
the U.S. Government's plan to have, by the end of Phase III, a single 
list of controlled items that is divided into three tiers and 
administered by a single licensing agency under a single set of export 
control regulations. The interim ``bright line'' is necessary because 
the structures of the USML and the CCL are significantly different. 
Many of the ITAR's USML controls are based on subjective or design-
intent criteria. That is, regardless of an item's capability, 
sophistication, age, funding, lethality, end-use, or origins, it is, 
with some exceptions, USML-controlled if it was originally 
``specifically designed, modified, or adapted'' for a military or space 
application, purpose, or use. In particular, most USML categories 
contain a non-specific catch-all control over every ``part'' or 
``component'' that was ``specifically designed or modified'' for any of 
the defense articles listed in that category. This means, for example, 
that a bolt specifically modified for a military vehicle, and all 
technical data and services directly related to the bolt, are 
controlled for almost worldwide export in a similar manner to the 
military vehicle itself (and all the technical data and services 
directly related to the military vehicle).
    Most of the EAR's CCL controls are based on the technical 
capabilities and specifications of items regardless of their intended 
end-use or the reasons for which they were designed. The CCL's controls 
are also more flexible in that different types of items are controlled 
differently to different groups of destinations and end-users depending 
on the significance of the item. In other words, the CCL is a more 
``positive'' list with more flexible controls than the USML. The EAR do 
nonetheless have a significant number of export control classification 
numbers (ECCNs) with controls on items that are ``specially designed'' 
for some purpose or end-item. The issues involving the definition of 
this term--a term that must remain in many ECCNs, at least for now, to 
remain consistent with multilateral obligations--are addressed below.
    Because the USML contains many broad, general descriptions of the 
types of articles controlled, each USML category will need to be 
``opened'' in order to further assess whether each defense article 
within its scope still warrants control under the USML based on 
national security concerns and to screen them against the U.S. 
Government's Criteria to create a tiered ``positive list.'' 
``Screening'' articles means determining which items that are currently 
USML-controlled defense articles should remain on the USML, which items 
that are currently USML controlled defense articles could be controlled 
under the CCL, and which items no longer require any control beyond 
EAR99 controls because they do not meet the criteria of any of the 
three tiers. ``Opening'' USML categories means identifying and then 
creating specific, positive lists of the specific types of articles the 
U.S. Government wants to control rather than relying on broad, general 
descriptions of or subjective criteria for determining when something 
is controlled.

IV. Steps for and Guidelines Controlling List Review and Revision 
Effort

    The following are the steps and the guidelines that the U.S. 
Government has developed to prepare proposed amendments to the USML and 
the CCL so that they are, with rare exceptions, aligned ``positive 
lists'' that do not overlap and are consistent with the tiered 
criteria. The guidelines are set out in ordered steps.

Step 1--Review Each USML Category and Related ECCNs Separately

    The USML and the CCL are too big and complex to be reviewed in 
their entirety all at once. In order to make the project more 
manageable, USML categories (and related ECCNs) are being reviewed 
separately, albeit with an awareness to the reviews or planned reviews 
in any other USML category or ECCN that could affect the effort. Public 
comments should be provided on a category-by-category basis, as further 
described below.

Step 2 --Provide Input Following the New Proposed Structure of the USML

    The U.S. Government is proposing to revise the structure of the 
USML so that it tracks the A, B, C, D, E structure of the CCL (which 
also tracks the Wassenaar Arrangement dual-use list structure) and also 
has an additional F and G ``Group'' to address ITAR-specific defense 
service and manufacturing controls. That is, each revised USML category 
is being divided into seven ``Groups'':

    ``A,'' for ``Equipment, Assemblies, and Components'';
    ``B,'' for ``Test, Inspection, and Production Equipment'';
    ``C,'' for ``Materials'';
    ``D,'' for Software'';
    ``E,'' for ``Technology'';
    ``F,'' for ``Defense Services''; and
    ``G,'' for ``Manufacturing and Production Authorizations.''

    For purposes of the list review and revision effort, the public is 
requested to provide input in sections A thru E. Sections F and G at 
this stage do not require input for building the positive list. To 
facilitate public comment, these heading terms are defined as follows:
    A. ``Equipment, Assemblies, and Components'' means any tangible 
item that falls within the scope of any one of the defined terms in 
ITAR Sec.  121.8--i.e., ``end-item,'' ``accessory,'' ``attachment,'' 
``associated equipment,'' ``component,'' or ``part''--or ``commodity,'' 
as defined in EAR Sec.  772.1, and is not ``test, inspection, or 
production equipment,'' as defined for Group B, or ``materials,'' as 
defined for Group C.
    B. ``Test, Inspection, and Production Equipment'' means any 
tangible item that is ``specially designed'' to test, inspect, produce, 
or develop any of the types of items defined in ITAR Sec.  121.8 or a 
``commodity,'' as defined in EAR Sec.  772.1. Examples include machine 
tools, measuring equipment, lithography equipment, tape lay-up 
machines, templates, jigs, mandrels, moulds, dies, fixtures, and 
alignment mechanisms.
    C. ``Material'' means any crude or processed matter that is not 
clearly identifiable as any of the types of items defined in ITAR Sec.  
121.8 or a ``commodity'' that is more broadly defined in EAR Sec.  
772.1. Examples

[[Page 76938]]

include the alloys, ceramics, prepregs, and raw material out of which 
parts, components, accessories, attachments, associated equipment, and 
end-items are made. Examples also include chemicals, toxins, and 
biological organisms.
    D. ``Software'' means a collection of one or more programs or 
microprograms fixed in any tangible medium of expression. It includes 
object code, source code, system functional design logic flows, 
algorithms, application programs, operating systems, and other programs 
to design, implement, test, operate, diagnose, or repair other software 
or items. A ``program'' is a sequence of instructions to carry out a 
process in, or convertible into, a form executable by an electronic 
computer. A ``microprogram'' is a sequence of elementary instructions, 
maintained in a special storage, the execution of which is initiated by 
the introduction of its reference instruction into an instruction 
register.
    E. ``Technology'' means, when reviewing items that are or should be 
on the USML, ``technical data'' as defined in ITAR Sec.  120.10(a)(1). 
``Technology'' means, when reviewing items that are or should be on the 
CCL, ``technology'' as defined in EAR Sec.  772.1. ``Technology'' does 
not include any information that falls within the scope of ``public 
domain,'' as defined in ITAR Sec.  120.11, or is outside the scope of 
the EAR or ``publicly available,'' as referenced in EAR Sec. Sec.  
734.3(b)(2) and (b)(3), respectively.
    These definitions are not intended to narrow or materially alter 
any term in the ITAR or the EAR. Rather, they are combinations of 
similar terms that are used now in the EAR and the ITAR to give 
structure to the tiered, aligned, positive list revision effort. The 
U.S. Government is currently preparing proposed harmonized terms to be 
used in the ITAR, EAR, and the sanctions regulations. This separate 
task should not, however, affect the public's review and input. The 
scope and meaning of and controls over defense services and 
manufacturing and production authorizations will be addressed 
separately.

Step 3--Describe Defense Articles in a ``Positive'' Way

    The Department of State requests public input on how defense 
articles should be described, to the maximum extent possible, in a 
``positive'' way. When providing input describing defense articles 
within the A, B, C, D, and E Group structure, the Department offers the 
following guidelines to aid the public in providing comments that make 
the revised USML a ``positive list'':
    1. Positive List Guideline #1: The public should, to the extent 
possible, use objective criteria or thresholds, such as precise 
descriptions or technical parameters, that do not lend themselves to 
multiple interpretations by reasonable people.
    Controls on items using technical descriptions will be the most 
effective means for all parties involved in the export process to 
clearly and easily determine jurisdiction and control requirements. For 
example, USML Categories V and XIV are subject to few jurisdictional 
questions because the controls are, in the main, based on specifically 
identified chemical compounds.
    Category V also illustrates the value of using a technical 
parameter to create clear controls. Both the USML and the CCL control 
spherical aluminum powder. The controls on the USML are limited, 
however, to a specific technical parameter: Spherical aluminum powder 
``in particle sizes of 60 micrometers or less.''
    By using this guideline for revisions to the USML, reliance on 
subjective or discretionary terms such as ``design-intent'' or 
``ultimate end-use'' of an item will be eliminated. Such terms have 
historically been difficult for industry and government to apply and 
consistently agree upon.
    2. Positive List Guideline #2: When providing suggestions for 
revised USML categories, descriptions should avoid any (i) controls 
that use generic labels for ``parts,'' ``components,'' ``accessories,'' 
``attachments,'' or ``end-items''; or (ii) other types of controls for 
specific types of defense articles because, for example, they were 
``specifically designed or modified'' for a defense article.
    This guideline includes a recommended prohibition against using as 
standards for in the USML generic phrases such as the following:
     Are ``capable for use with'' a defense article;
     Are ``equivalent to'' a defense article;
     Have ``significant military or intelligence 
applicability'';
     Have a ``military purpose'';
     Have ``military application''; or
     Are ``predominately used'' in military applications or end 
items.
    This instruction does not prohibit the control on the USML of items 
that have, by whatever definition, any of these characteristics. To the 
contrary, the instruction requests the public describe and identify 
such items without using the generic phrases, which are at the root of 
many of the difficulties encountered in the current export control 
lists.
    This instruction also does not mean that specific models or part 
numbers of components need to be identified. Rather, types of items 
should be listed. For example, the parts and components controlled 
under a revised USML Category I could be limited to ``barrels, 
receiver, frames, slides, bolts, and bolt carriers that fit and 
function in any of the above-listed firearms.'' All other parts and 
components that fit or function in such firearms, even if specifically 
or specially designed or modified for them in terms of their size, 
shape or configuration, could be controlled in a separate entry that 
could become subject to the EAR.
    The guidelines governing how items moved to the jurisdiction of the 
EAR would be controlled will be addressed in a separate future 
Department of Commerce notice. The Department of State is seeking with 
this notice comments on current defense articles that the public does 
not view meet any of the criteria as explained in Step 4 below.
    This guideline is a critical tool for achieving one of the 
essential goals of the list reform effort, which is to ``de-conflict'' 
the USML and the CCL. At the end of the process, the lists should be 
written so that exporters easily and consistently can determine the 
jurisdictional status of an article, technical data, or software--and 
reasonable parties would reach the same conclusion about the nature of 
the item at issue if presented with the same facts.
    This drafting prohibition exists because it is necessary to stop 
using terms that do not readily lend themselves to objective 
determinations. These terms have been at the core of most 
jurisdictional disputes over the decades and have thus been a 
distraction from the larger mission of precisely and clearly 
controlling items for national security and foreign policy purposes.
    Guideline 2 does not apply to the miscellaneous USML 
Categories XVII or XXI. The guidelines, the limitations on and 
requirements for use, and its prospective-only characteristics, will be 
described in more detail in a separate notice.
    3. Positive List Guideline # 3: Items are not to be listed on both 
the CCL and the USML unless there are specific technical or other 
objective criteria--regardless of the reason why any particular item 
was designed or modified--that distinguish between when an item is 
USML-controlled and when it is CCL-controlled.

[[Page 76939]]

    An implication of this guideline is that if an item is listed on 
the CCL, an exporter is entitled to conclude that it is EAR-controlled 
unless there is a specific cross reference in the ECCN to the USML 
stating that such items that exceed the technical characteristics 
described in that USML category are ITAR-controlled--even if the item 
was specifically designed, modified, or intended for use in civil 
applications. If a cross-reference does not exist, one will be added to 
recommend consulting both the USML and the CCL for potential controls, 
particularly in situations where an item exceeds specific technical 
parameters that could cause it to be USML-controlled.
    For example, an integrated circuit that falls within the technical 
description of ECCN 3A001 is CCL-controlled regardless of whether it 
was specifically designed or modified, in terms of its form or fit, to 
function exclusively in a military end-item unless it exceeds the 
radiation tolerances described in USML subcategory XV(d). An integrated 
circuit that exceeds such tolerances would be USML controlled 
regardless of why it was so designed. This example does not preclude 
the possibility that subcategory XV(d) may need to be amended to 
increase the radiation-tolerant thresholds.
    An implication of this guideline is that all controls in the 
amended USML and CCL on parts and components must be at the item-type 
level, with technical characteristics determining whether or how the 
part or component is controlled for export, and not at the model or 
part number level by virtue of an item having been modified to fit into 
a particular end-item. This approach de-emphasizes the significance of 
``form'' or ``fit'' in determining whether an item is USML-controlled 
and focuses more on its function, capability, performance, or 
characteristics.
    4. Positive List Guideline #4: In cases where technical 
characteristics are classified and need to be protected, the objective 
descriptions of the products controlled should be set at an 
unclassified level below the classified level.
    As a reminder, both the USML and CCL list review efforts pertain 
only to unclassified information (e.g., not Confidential, Secret, or 
Top Secret). This means that USML Category XVII (Classified Articles, 
Technical Data and Defense Services Not Otherwise Enumerated) does not 
need to be reviewed or revised.
    5. Positive List Guideline #5: Use ``Specially Designed'' as a 
control criterion only when required by multilateral obligations or 
when no other reasonable option exists.
    There are specific, identified types of end-items and generic 
``components'' that are controlled on the Wassenaar Munitions List 
because they are ``specially designed'' for another item or some 
purpose. The Wassenaar Arrangement does not define the term ``specially 
designed.'' Controls for such items should nonetheless carry forward to 
the revised USML or revised CCL with as precise of a description as 
possible of what is controlled. Thus, for example, the revised USML 
subcategory VII(g) generic, catch-all controls over components would 
read ``Military Vehicle components as follows:''. The subcategory would 
then list the types of components controlled by that subcategory in 
that tier using the objective criteria set forth above.
    For articles that are not within the scope of the Wassenaar 
Munitions List or other multilateral regime, but should nonetheless be 
listed on the USML, the term ``specially designed'' should rarely be 
used as a control parameter. Where a revised USML subcategory must use 
``specially designed'' to remain consistent with the Wassenaar 
Arrangement or other multilateral regime obligation or when no other 
reasonable option exists to describe the control without using the 
term, the public is asked to use the following draft definition of the 
term:
    ``For the purposes of this Subchapter, the term ``specially 
designed'' means that the end-item, equipment, accessory, attachment, 
system, component, or part (see ITAR Sec.  121.8) has properties that 
(i) distinguish it for certain predetermined purposes, (ii) are 
directly related to the functioning of a defense article, and (iii) are 
used exclusively or predominantly in or with a defense article 
identified on the USML.''
    The Departments of State and Commerce will be seeking public 
comment on this draft definition in a later notice.

Step 4: Provide Recommended Tier of Control for the Defense Articles 
Identified in Step 3

    The Department of State requests public input on screening those 
items the public identifies in a more ``positive'' way in Step 3 
against the three tier control criteria listed in Section III above and 
described further below, and identify the tier of control for items 
within each category and group (A, B, C, D, and E). The U.S. Government 
will make the final decisions on what types of defense articles are 
within the scope of any of the three tiers and, thus, may or may not 
accept suggestions regarding how items should be tiered. Nonetheless, 
the Department of State is interested in the public's views on the 
issue of how defense articles on a positive list can be described so 
that they are distinguished with tiered, objective criteria.
    Although the U.S. Government retains full discretion in deciding 
how any particular type of defense article is tiered, or divided by 
objective criteria among different tiers, the public is asked to 
provide input regarding how defense articles, or types of defense 
articles with different capabilities, should be described within 
different tiers.
    The Criteria and the scope of its three tiers are as follows:
    1. A Tier 1 control shall apply to:
    a. A weapon of mass destruction (WMD);
    b. A WMD-capable unmanned delivery system;
    c. A plant, facility or item specially designed for producing, 
processing, or using:
    (i) WMDs;
    (ii) Special nuclear materials; or
    (iii) WMD-capable unmanned delivery systems; or
    d. An item almost exclusively available from the United States that 
provides a critical military or intelligence advantage.
    2. A Tier 2 control shall apply to an item that is not in Tier 1, 
is almost exclusively available from Regime Partners or Adherents and:
    a. Provides a substantial military or intelligence advantage; or
    b. Makes a substantial contribution to the indigenous development, 
production, use, or enhancement of a Tier 1 or Tier 2 item.
    3. A Tier 3 control shall apply to an item not in Tiers 1 or 2 
that:
    a. Provides a significant military or intelligence advantage;
    b. Makes a significant contribution to the indigenous development, 
production, use, or enhancement of a Tier 1, 2, or 3 item; or
    c. Is controlled for national security, foreign policy, or human 
rights reasons.
    Tier 1 defense articles are those that are almost exclusively 
available from the United States and that provide a critical military 
or intelligence advantage.
    Tier 2 defense articles are those that are almost exclusively 
available from countries that are members of the multilateral export 
control regimes that control such items and (i) provide a substantial 
military or intelligence advantage, or (ii) make a substantial 
contribution to the indigenous development, production, use, or 
enhancement of a Tier 1 or Tier 2 item.

[[Page 76940]]

    Tier 3 defense articles are those that provide a significant 
military or intelligence advantage, or make a significant contribution 
to the indigenous development, production, use, or enhancement of a 
Tier 1, 2, or 3 item.
    For defense articles currently controlled on the USML, the public 
is asked to identify the items they believe do not fall within the 
scope of any of the criteria's tiers and explain why they believe such 
items are not within the scope of the criteria. These items may be 
candidates to be moved to the CCL.
    Items controlled pursuant to multilateral agreement, i.e., the 
Wassenaar Arrangement, the Missile Technology Control Regime, the 
Australia Group, the Chemical Weapons Convention, and the Nuclear 
Suppliers Group, that do not meet the availability or ``military or 
intelligence advantage'' control criteria in Tiers 1, 2 or 3 will be 
identified by the U.S. Government as Tier 3 items until and unless 
their control status is adjusted consistent with the procedures of the 
applicable multilateral agreement.
    The following are definitions of several of the key terms and 
phrases used in the tiered criteria set forth above. The term ``almost 
exclusively available'' means that the item is only available from a 
very small number of other countries that have in place effective 
export controls on the item. The term ``critical'' means providing a 
capability with respect to which the United States cannot afford to 
fall to parity and that would pose a grave threat to national security 
if not controlled (i.e., a ``crown jewel''). Examples of ``grave threat 
to national security'' include: Armed hostilities against the United 
States or its allies; disruption of foreign relations vitally affecting 
the national security; the compromise of vital national defense plans 
or complex crypto-logic and communications intelligence systems; the 
revelation of sensitive intelligence operations; the disclosure of 
scientific or technological developments vital to national security; or 
critical assistance to foreign development and/or acquisition of WMD.
    The term ``substantial'' means providing a capability with respect 
to which the United States must maintain parity and that would pose a 
serious threat to national security if not controlled. Examples of a 
``serious threat to the national security'' include: Disruption of 
foreign relations significantly affecting the national security; 
significant impairment of a program or policy directly related to the 
national security; revelation of significant military plans or 
intelligence operations; compromise of scientific or technological 
developments relating to national security; or substantial assistance 
to foreign development or acquisition of a WMD.
    The term ``significant'' means providing a capability that could be 
reasonably expected to cause damage to national security if not 
controlled.

    Dated: November 30, 2010.
Ellen O. Tauscher,
Under Secretary, Arms Control and International Security, Department of 
State.
[FR Doc. 2010-30994 Filed 12-8-10; 4:15 pm]
BILLING CODE 4710-25-P