[Federal Register Volume 75, Number 40 (Tuesday, March 2, 2010)]
[Notices]
[Pages 9439-9441]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-4197]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket Nos. OSHA-2007-0041]
FM Approvals: Application for Expansion of Recognition; Wyle
Laboratories: Voluntary Modification of the Scope of Recognition; and
Temporary Reinstatement of NFPA 72
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: This notice announces the application of FM Approvals LLC (FM)
for expansion of its recognition as a Nationally Recognized Testing
Laboratory (NRTL), and presents the Agency's preliminary finding to
grant this request. This preliminary finding does not constitute an
interim or temporary approval of this application. This notice also
announces a voluntary modification of the NRTL scope of recognition of
Wyle Laboratories, Inc., and the temporary reinstatement of NFPA 72.
DATES: For the FM application, submit information or comments, or any
request for extension of the time to comment, on or before March 17,
2010. All submissions must bear a postmark or provide other evidence of
the submission date.
The modification of the NRTL scope of recognition of Wyle
Laboratories will become effective on March 2, 2010. The temporary
reinstatement of NFPA 72 is retroactive to September 14, 2009 and will
terminate on September 14, 2011. Do not submit comments or other
responses regarding this modification or reinstatement.
ADDRESSES: Submit comments by any of the following methods:
Electronically: Submit comments electronically at http://www.regulations.gov, which is the Federal eRulemaking Portal. Follow
the instructions online for making electronic submissions.
Fax: If submissions, including attachments, are no longer than 10
pages, commenters may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, or messenger or courier service:
Submit one copy of the comments to the OSHA Docket Office, Docket No.
OSHA-2007-0041, U.S. Department of Labor, Room N-2625, 200 Constitution
Avenue, NW., Washington, DC 20210. Deliveries (hand, express mail, and
messenger and courier service) are accepted during the Department of
Labor's and Docket Office's normal business hours, 8:15 a.m.-4:45 p.m.,
e.t.
Instructions: All submissions must include the Agency name and the
OSHA docket number (i.e., OSHA-2007-0041). OSHA will place all
submissions, including any personal information provided, in the public
docket without revision, and these may be made available online at
http://www.regulations.gov.
Docket: To read or download submissions or other material in the
docket, go to http://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g.,
copyrighted material) is not publicly available to read or download
through the Web site. All submissions, including copyrighted material,
are available for inspection and copying at the OSHA Docket Office.
Extension of comment period: Submit requests for an extension of
the comment period for the FM application on or before March 17, 2010
to the Office of Technical Programs and Coordination Activities, NRTL
Program, Occupational Safety and Health Administration, U.S. Department
of Labor, 200 Constitution Avenue, NW., Room N-3655, Washington, DC
20210, or by fax to (202) 693-1644.
FOR FURTHER INFORMATION CONTACT: MaryAnn Garrahan, Director, Office of
Technical Programs and Coordination Activities, NRTL Program,
Occupational Safety and Health Administration, U.S. Department of
Labor, 200 Constitution Avenue, NW., Room N-3655, Washington, DC 20210;
telephone: (202) 693-2110. For information about the NRTL Program, go
to http://www.osha.gov, and select ``N'' in the site index.
SUPPLEMENTARY INFORMATION: Electronic copies this Federal Register
notice are available at http://www.regulations.gov. This notice, as
well as news releases and other information also are available at
OSHA's Web Page at http://www.osha.gov.
I. Notice of Expansion Application
The Occupational Safety and Health Administration (OSHA) is
providing notice that FM Approvals LLC (FM) applied for expansion of
its current recognition as a Nationally Recognized Testing Laboratory
(NRTL). FM's expansion request covers the use of additional test
standards.
OSHA recognition of an NRTL signifies that the organization meets
the legal requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition, and is not a delegation or grant of government
authority. As a result of recognition, employers may use products
approved by the NRTL to meet OSHA standards that require testing and
certification.
The Agency processes applications by an NRTL for initial
recognition, or for an expansion or renewal of this recognition,
following requirements in Appendix A to 29 CFR 1910.7. This appendix
requires that the Agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides its preliminary finding, and, in the second
notice, the Agency provides its final decision on the application.
These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational Web page
for each NRTL that details its scope of recognition. These pages can be
accessed from the Web site at http://www.osha.gov/dts/otpca/nrtl/index.html. Each NRTL's scope of recognition has three elements: (1)
The type of products the NRTL may test, with each type specified by its
applicable test standard; (2) the recognized site(s) that have the
technical capability to perform the testing and certification
activities for test standards within the NRTL's scope; and (3) the
supplemental program(s) that the NRTL may use, each of which allows the
NRTL to rely on other parties to perform activities necessary for
testing and certification.
The current address of the FM facilities (sites) recognized by OSHA
are: FM Approvals, 1151 Boston-Providence Turnpike, Norwood,
Massachusetts 02062, and FM Approvals, 743 Reynolds Road, West
Gloucester, Rhode Island 02814.
[[Page 9440]]
General Background on the Application
FM submitted an application, dated July 18, 2007, to expand its
recognition to include 31 additional test standards. The NRTL Program
staff is deferring action on 20 of these standards pending resolution
of technical issues. The staff determined that ten of the remaining 11
standards are ``appropriate test standards'' within the meaning of 29
CFR 1910.7(c). In connection with this request, NRTL Program staff did
not perform an on-site review of FM's recognized sites. However, the
staff analyzed other information pertinent to the request and
determined that FM has the capabilities to perform the testing relating
to the ten standards, which are listed below. As a result, the Agency
would approve these ten test standards for the expansion.
FM seeks expansion of its recognition for testing and certification
of products to the following test standards:\1\
\1\ The designations and titles of these test standards were
current at the time of the preparation of this notice.
UL 153 Portable Electric Luminaires\2\
---------------------------------------------------------------------------
\2\ FM requested recognition for UL 298--Portable Electric Hand
Lamps, but this standard has been withdrawn and superseded by UL
153.
---------------------------------------------------------------------------
UL 268A Smoke Detectors for Duct Application
UL 484 Room Air Conditioners
UL 521 Heat Detectors for Fire Protective Signaling Systems
UL 1480 Speakers for Fire Alarm, Emergency, and Commercial and
Professional Use
UL 1638 Visual Signaling Appliances--Private Mode Emergency and General
Utility Signaling
FM 3210 Heat Detectors for Automatic Fire Alarm Signaling
FM 7260 Electrostatic Finishing Equipment
UL 61010A-1 Electrical Equipment for Laboratory Use; Part 1: General
Requirements
UL 61010B-1 Electrical Measuring and Test Equipment; Part 1: General
Requirements
OSHA's recognition of FM, or any NRTL, for a test standard is
limited to equipment or materials (i.e., products) for which OSHA
standards require third-party testing and certification before use in
the workplace. Consequently, if a test standard also covers any
product(s) for which OSHA does not require such testing and
certification, an NRTL's scope of recognition does not include that
product(s).
The test standards listed above may be approved as American
National Standards by the American National Standards Institute (ANSI).
However, for clarity, we use the designation of the standards
developing organization for the standard as opposed to the ANSI
designation. Under our procedures, any NRTL recognized for an ANSI-
approved test standard may use either the latest proprietary version of
the test standard or the latest ANSI version of that standard. You may
contact ANSI for information on whether a test standard is currently
ANSI-approved.
Preliminary Finding on the Application
FM submitted an acceptable request for expansion of its recognition
as an NRTL. Our review of the application file and other pertinent
documents indicates that FM can meet the requirements, as prescribed by
29 CFR 1910.7, for an expansion of its recognition to include the
additional test standards listed above. This preliminary finding does
not constitute an interim or temporary approval of the application.
OSHA welcomes public comments, in sufficient detail, as to whether
FM meets the requirements of 29 CFR 1910.7 for expansion of its
recognition as a Nationally Recognized Testing Laboratory. Your
comments should consist of pertinent written documents and exhibits.
Should you need more time to comment, you must request it in writing,
including reasons for the request. OSHA must receive your written
request for an extension by the due date for comments. OSHA will limit
any extension to 30 days unless the requester justifies a longer
period. We may deny a request for an extension if it is not adequately
justified. You may obtain or review copies of FM's request and other
pertinent documents, and all submitted comments, as received, by
contacting the Docket Office, Room N-2625, Occupational Safety and
Health Administration, U.S. Department of Labor, at the above address.
Docket No. OSHA-2007-0041 contains all materials in the record
concerning FM's application.
The NRTL Program staff will review all timely comments and, after
resolution of issues raised by these comments, will recommend whether
to grant FM's expansion request. The Assistant Secretary will make the
final decision on granting the request, and, in making this decision,
may undertake other proceedings that are prescribed in Appendix A to 29
CFR 1910.7. OSHA will publish a public notice of this final decision in
the Federal Register.
II. Notice of Modification of Wyle's Recognition
Wyle Laboratories, Inc., (WL) has requested a modification to its
current scope of recognition under the NRTL Program. This request,
dated August 27, 2009, reduces the number of test standards in WL's
current NRTL scope. Subsection II.D of Appendix A to 29 CFR 1910.7
provides that OSHA must inform the public of such a reduction in scope.
Accordingly, effective today, OSHA is modifying WL's scope of
recognition to eliminate the 38 test standards listed below. Wyle also
requested removal of another test standard (UL 1262); however, OSHA
removed it earlier from Wyle's scope of recognition.
UL 8 Foam Fire Extinguishers
UL 20 General-Use Snap Switches
UL 92 Fire Extinguisher and Booster Hose
UL 98 Enclosed and Dead-Front Switches
UL 244A Solid-State Controls for Appliances
UL 299 Dry Chemical Fire Extinguishers
UL 363 Knife Switches
UL 393 Indicating Pressure Gauges for Fire-Protection Service
UL 444 Communications Cables
UL 466 Electric Scales
UL 497A Secondary Protectors for Communication Circuits
UL 506 Specialty Transformers
UL 626 2\1/2\; Gallon Stored-Pressure Water-Type Fire Extinguishers
UL 711 Rating and Fire Testing of Fire Extinguishers
UL 796 Printed-Wiring Boards
UL 917 Clock-Operated Switches
UL 1022 Line Isolated Monitors
UL 1047 Isolated Power Systems Equipment
UL 1053 Ground-Fault Sensing and Relaying Equipment
UL 1054 Special-Use Switches
UL 1058 Halogenated Agent Extinguishing System Units
UL 1091 Butterfly Valves for Fire-Protection Service
UL 1093 Halogenated Agent Fire Extinguishers
UL 1254 Pre-Engineered Dry Chemical Extinguishing Systems Units
UL 1411 Transformers and Motor Transformer for Use in Audio-, Radio-,
and Television-Type Appliances
UL 1412 Fusing Resistors and Temperature-Limited Resistors for Radio-
and Television-Type Appliances
UL 1416 Overcurrent and Overtemperature Protectors for Radio and
Television-Type Appliances
UL 1424 Cables for Power-Limited Fire-Protective-Signaling Circuits
UL 1429 Pullout Switches
[[Page 9441]]
UL 1474 Adjustable Drop Nipples for Sprinkler Systems
UL 1481 Power Supplies for Fire-Protective Signaling Systems
UL 1486 Quick Opening Devices for Dry Pipe Valves for Fire-Protection
Service
UL 1557 Electrically Isolated Semiconductor Devices
UL 1577 Optical Isolators
UL 1682 Plugs, Receptacles and Cable Connectors, of the Pin and Sleeve
Type
UL 1876 Isolating Signal and Feedback Transformers for Use in
Electronic Equipment
UL 2006 Halon 1211 Recovery/Recharge Equipment
UL 2111 Overheating Protection for Motors
III. Temporary Reinstatement of NFPA 72
On September 14, 2009, OSHA published a notice (see 74 FR 47026) to
modify the scopes of recognition (``scopes'') of several NRTLs because
standards developing organizations (SDOs) withdrew a number of test
standards from their catalog of published standards. Consequently,
these NRTLs could no longer use the withdrawn test standards to certify
selected products requiring certification under OSHA standards. In
response to the SDOs' action, OSHA's 2009 Federal Register notice
deleted the withdrawn standards from the scope of each affected NRTL,
and added to the NRTL's scopes any known replacement standard(s).
One of the withdrawn standards was ANSI/NFPA 72--Installation,
Maintenance, and Use of Protective Signaling Systems. The National Fire
Protection Association (NFPA) withdrew this test standard several years
ago after integrating it into the National Fire Alarm and Signaling
Code (NFASC), also designated NFPA 72. However, OSHA's 2009 Federal
Register notice did not list the NFASC document as a replacement for
NFPA 72 because the NRTL Program requirements do not allow NRTLs to
include general consensus codes or other similar standards in their
scopes of recognition. Such standards do not meet the NRTL Program's
requirements for an ``appropriate test standard,'' i.e., the standards
do not primarily specify testing requirements for particular types of
products.
After OSHA deleted the NFPA 72 standard, several NRTLs contacted
OSHA to request recognition for the NFASC. One NRTL informed OSHA that
deleting the test standard so abruptly invalidated approvals for many
products. The NRTLs requested a two-year transition period to identify
a comparable replacement test standard to use in certifying the
affected products.
When OSHA determines that a comparable replacement test standard is
not available, it may delay the effective date for deleting a withdrawn
test standard from NRTLs' scopes so the affected NRTLs can continue
certifying products while identifying a comparable replacement
standard. Accordingly, OSHA is temporarily reinstating NFPA 72 to the
scopes of the affected NRTLs. The reinstatement period is retroactive
to September 14, 2009, the date the standard was removed from these
NRTLs' scopes, and ends September 14, 2011. By September 14, 2010, each
affected NRTL wishing to continue certifying the affected products must
notify OSHA of the name(s) of comparable replacement test standard(s)
the NRTL will use in place of NFPA 72. If not already in the NRTL's
scope, OSHA will add any such standard that is ``appropriate,''
provided the NRTL has the capability for the testing. By September 14,
2011, OSHA will remove NFPA 72 from all NRTLs' scope, and these NRTLs
must cease certifying products to NFPA 72, and certify products to the
comparable replacement standard(s) in their scopes.
IV. Authority and Signature
David Michaels, PhD, MPH, Assistant Secretary of Labor for
Occupational Safety and Health, 200 Constitution Avenue, NW.,
Washington, DC 20210, directed the preparation of this notice.
Accordingly, the Agency is issuing this notice pursuant to Sections
6(b) and 8(g) of the Occupational Safety and Health Act of 1970 (29
U.S.C. 655 and 657), Secretary of Labor's Order No. 5-2007 (72 FR
31160), and 29 CFR part 1911.
Signed at Washington, DC, on February 22, 2010.
David Michaels,
Assistant Secretary for Occupational Safety and Health.
[FR Doc. 2010-4197 Filed 3-1-10; 8:45 am]
BILLING CODE 4510-26-P