[Federal Register Volume 75, Number 46 (Wednesday, March 10, 2010)] [Notices] [Pages 11404-11414] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2010-5129] [[Page 11403]] ----------------------------------------------------------------------- Part V Environmental Protection Agency ----------------------------------------------------------------------- Certain New Chemicals; Receipt and Status Information; Notices Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 / Notices [[Page 11404]] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2010-0112; FRL-8814-1] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 26, 2009 through January 22, 2010, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the specific PMN number or TME number, must be received on or before April 9, 2010. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2010-0112, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2010-0112. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information. Instructions: Direct your comments to docket ID number EPA-HQ-OPPT- 2010-0112. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e- mail. The regulations.gov website is an ``anonymous access'' system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e- mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional information about EPA's public docket, visit the EPA Docket Center homepage at http://www.epa.gov/epahome/dockets.htm. Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure. FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When submitting comments, remember to: i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number). ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number. [[Page 11405]] iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes. iv. Describe any assumptions and provide any technical information and/or data that you used. v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced. vi. Provide specific examples to illustrate your concerns and suggest alternatives. vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats. viii. Make sure to submit your comments by the comment period deadline identified. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 26, 2009 through January 22, 2010, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs This status report identifies the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit I. to access additional non-CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 161 Premanufacture Notices Received From: 10/26/09 to 1/22/10 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-10-0022 10/26/09 01/23/10 H.B. Fuller (G) Industrial (G) Isocyanate- adhesive functional polyurethane prepolymer P-10-0023 10/26/09 01/23/10 CBI (S) Pigment (G) Benzenesulfonic derivative used in acid, 4-amino, azo ink contained in ink pigment jet printer cartridges P-10-0024 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted another chemical benzoyl chloride substance, destructive use P-10-0025 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted another chemical pyrazolone substance, destructive use P-10-0026 10/26/09 01/23/10 CBI (G) Precursor to (G) Salt of another chemical condensation product substance, of substituted destructive use pyrazolone P-10-0027 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted another chemical benzoic acid substance, destructive use P-10-0028 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted another chemical benzoic acid substance, destructive use P-10-0029 10/28/09 01/25/10 CBI (S) Acrylic polymer (G) Acrylic polymer used in the manufacture of adhesive tapes P-10-0030 10/28/09 01/25/10 PPG Industries, Inc. (G) Component of a (G) Aromatic coating polyurethane P-10-0031 10/28/09 01/25/10 Reichhold, Inc. (G) Flexibilizing (G) Alkanediol, resin, non- polymer with dispersive alkyleneamine, isocyanate and glycol P-10-0032 10/27/09 01/24/10 CBI (G) Dewaxing aid (G) Alkylester, polymer with alkyl acrylate P-10-0033 10/27/09 01/24/10 CBI (G) Gear oil additive (G) Aromatic hydrogenated poly alkyldiene containing poly alkyl methacrylate P-10-0034 10/27/09 01/24/10 Firmenich Inc. (S) Aroma for use in (S) 1(2H)- fragrance mixtures, naphthalenone, which in turn are octahydro-2,3,81- used in perfumes, trimethyl-, (3R, soaps, cleansers, 4AR, 8AR)-rel- etc. P-10-0035 10/29/09 01/26/10 CBI (G) Conditioning (G) Sodium agent carboxylate P-10-0036 10/30/09 01/27/10 CBI (S) Polyester (G) Substituted filament and staple polyethylene terephtalate P-10-0037 10/30/09 01/27/10 CBI (S) Flame retardant (G) Substituted in polyester propionic acid filament and staple P-10-0038 11/02/09 01/30/10 CBI (S) Flame retardant (G) Heterocyclic salt for use in adhesives and coatings P-10-0039 11/03/09 01/31/10 Nanocomp (G) For all (S) Carbon Technologies, Inc. applications listed here the field is composite structures for aerospace P-10-0040 11/03/09 01/31/10 Nanocomp (G) For all (S) Carbon Technologies, Inc. applications listed here the field is aerospace P-10-0041 11/03/09 01/31/10 Huntsman Corporation (G) Dispersing agent (G) Polyether polyacid comb polymer [[Page 11406]] P-10-0042 11/03/09 01/31/10 CBI (S) Laminating (G) Polyester adhesive polyurethane P-10-0043 11/03/09 01/31/10 CBI (S) Coatings (G) Silicone modified application alkyd resin P-10-0044 11/04/09 02/01/10 Green Era Solutions (S) Fragrance (S) Extractives and ingredient their physically modified derivatives. Callitropsis nootkatensis. Oil, callitropsis nootkatensis P-10-0045 11/04/09 02/01/10 CBI (G) Adhesives (G) Solvent free adhesives P-10-0046 11/04/09 02/01/10 Coim USA Inc. (S) Foam insulation (S) 1,4- benzenedicarboxylic acid, polymer with 2,2- bis(hydroxymethyl)- 1,3-propanediol, hexanedioic acid, .alpha.-hydro- .omega.- hydroxypoly(oxy-1,2- ethanediyl), 1,3- isobenzofurandione and 2,2'- oxybis[ethanol], benzoate P-10-0047 11/05/09 02/02/10 CBI (S) Curing agent for (G) Alkenoic acid, 2- epoxy resin in methyl-, 2- protective coatings oxiranylmethyl ester, reaction products with 4,4'- methylenebis (cyclohexanamine) P-10-0048 11/05/09 02/02/10 CBI (G) Pigment (G) Sulfonated SMA dispersant; drilling fluid dispersant P-10-0049 11/06/09 02/03/10 CBI (S) Resin for (G) Polyester coatings for metal polyurethane P-10-0050 11/09/09 02/06/10 CBI (G) Component in (G) Amine salts of corrosion inhibitor fatty acids formulation for oil field use P-10-0051 11/09/09 02/06/10 Cognis Corporation (S) Performance (S) Starch, 2- additive for hard carboxyethyl 2- surface cleaners methyl-3-oxo-3-[[3- (trimethylammonio)pr opyl]amino]propyl ether, chloride P-10-0052 11/09/09 02/06/10 CBI (G) Fuel additive (G) Aryl polyolefin intermediate P-10-0053 11/10/09 02/07/10 CBI (S) Reactant for the (G) Halogenated manufacture of a aromatic amine pesticide P-10-0054 11/10/09 02/07/10 DIC International (G) Additive for (G) Fluorinated (USA) LLC lubricating oil acrylic acid ester copolymer (telomer type) P-10-0055 11/09/09 02/06/10 CBI (S) Ingredient in (S) Butanoic acid, 3- fragrance compound hydroxy-, 5-methyl-2- (1- methylethyl)cyclohex yl ester P-10-0056 11/09/09 02/06/10 CBI (S) Ingredient in (S) Butanoic acid, 3- fragrance compound mercapo-2-methyl-, ethyl ester P-10-0057 11/09/09 02/06/10 CBI (G) Fuel additive (G) Polyolefin aryl amine P-10-0058 11/12/09 02/09/10 CBI (G) Intermediate (G) Partially fluorinated alcohol substituted glycol P-10-0059 11/12/09 02/09/10 CBI (G) Intermediate (G) Partially fluorinated alcohol substituted glycol P-10-0060 11/12/09 02/09/10 CBI (G) Surface active (G) Partially agent fluorinated alcohol substituted glycol P-10-0061 11/13/09 02/10/10 CBI (G) Chemical (G) Alkyl thiol, intermediate - manufacture of, by- destructive use products from, distant lights P-10-0062 11/13/09 02/10/10 CBI (G) Chemical (G) Alkyl thiol, intermediate - manufacture of, by- destructive use products from, distant residues P-10-0063 11/12/09 02/09/10 Mitsui Chemicals (S) Binder for toner (G) Aromatic America, Inc. discarboxylic acid, polymer with 1,3- diisocyanatomethylbe nzene, .alpha., .alpha'.-[(1- methylethylidene)di- 4,1- phenylene]bis[.omega .- hydroxypoly[oxy(meth yl-1-2, ethanediyl)]] and 2,2'- oxybis[etehanol] P-10-0064 11/16/09 02/13/10 CBI (G) Curing aid (G) Amidosilane P-10-0065 11/16/09 02/13/10 CBI (G) Additive, open, (G) Polyether non-dispersive use modified polyurea P-10-0066 11/16/09 02/13/10 CBI (G) Ethoxylation (G) Partially initiator fluorinated ortho- ester P-10-0067 11/16/09 02/13/10 CBI (G) Used in the (G) Organotin manufacture of compound polyurethane foam P-10-0068 11/17/09 02/14/10 CBI (S) Additive for (G) Sulfur silane rubber articles [[Page 11407]] P-10-0069 11/17/09 02/14/10 CBI (G) Used in adhesive (G) alkyl acrylate, products polymer with aliphatic acid vinyl ester, vinyl monomer, acrylate and hydroxyalkyl acrylate P-10-0070 11/17/09 02/14/10 CBI (G) Used in adhesive (G) acrylate, polymer products with aliphatic acid vinyl ester, vinyl monomer and hydroxyalkyl acrylate P-10-0071 11/17/09 02/14/10 CBI (G) Used in adhesive (G) alkyl acrylate, products polymer with aliphatic acid vinyl ester, acrylate hydroxyalkyl acrylate, alkanenitrile and acrylate P-10-0072 11/13/09 02/10/10 The Dow Chemical (S) Monomer inhibitor (G) Substituted Company oxidized piperidinyl derivative P-10-0073 11/17/09 02/14/10 CBI (G) Hardener for (G) Blocked industrial coatings polyisocyanate P-10-0074 11/17/09 02/14/10 Alberdingk Boley, (S) For special metal (G) Butanoic acid, 3- Inc. coatings oxo-, 2-[(2-methyl-1- oxo-2-propen -1- yl)oxy]ethyl ester, polymer with butyl 2- methyl-2-propenoate, ethenylbenzene, 2- ethylhexyl 2- propenoate, methyl 2- methyl-2-propenoate, phosphoric acid, di- ester with hydroxy ethyl methacrylate and 2-(phosphonooxy) ethyl 2-methyl-2- propenoate P-10-0075 11/18/09 02/15/10 CBI (G) Resin for use in (G) Brominated manufacture of aromatic polyether reinforced composite polyester products P-10-0076 11/18/09 02/15/10 CBI (S) Raw material used (S) Benzene, 4-bromo- for production of 1,2-dimethyl- 1,1-biphenyl, 3,3',4,4'- tetramethyl P-10-0077 11/18/09 02/15/10 CBI (G) Automotive (G) Linear hydroxy coatings funtional polyester P-10-0078 11/18/09 02/15/10 Dow Chemical Company (G) Adhesive (G) Capped component polyurethane adduct P-10-0079 11/18/09 02/15/10 CBI (G) Colorant (G) Substituted naphthalene mixed salt P-10-0080 11/19/09 02/16/10 CBI (G) Adhesive (G) Mdi modified polyester resin P-10-0081 11/18/09 02/15/10 CBI (S) Curing agent for (G) Phenol, polymer epoxy resin in with formaldehyde, protective coatings glycidyl ether, reaction products with 5-amino-1,3,3- trialkylcycloalkanem ethanamine P-10-0082 11/18/09 02/15/10 CBI (G) Multi-purpose (S) 1,2,3- additive propanetriol, homopolymer, hexadecanoate octadecanoate P-10-0083 11/05/09 02/02/10 CBI (G) Resin component (G) Hydroxy-aryl, polymer with substituted benzene, cyanate P-10-0084 11/20/09 02/17/10 CBI (G) Dispersion (G) Carbazole violet additive for sulfonamide derivate printing ink P-10-0085 11/23/09 02/20/10 CBI (G) Non-dispersive (G) Bismuth salt of use lactic acid P-10-0086 11/23/09 02/20/10 CBI (G) Laminate resin (G) Epoxidized viscosity modifier benzoxazine P-10-0087 11/23/09 02/20/10 CBI (G) Destructive use (G) Octylated phenyl- alpha-naphthylamine P-10-0088 11/24/09 02/21/10 Frx Polymers, Inc. (G) Frx co-polymers (G) Polyphosphonate- are non-halogenated co-polycarbonate polyphosphonate-co- polycarbonate flame retardant polymers that address the need to replace the current commercial bromine-containing flame retardants that are being phased out due to environmental regulation. Flame retardants are required to meet fire safety standards in order to reduce flammability of combustible materials. Use sectors are: consumer electronics as well as building and construction lighting. P-10-0089 11/25/09 02/22/10 CBI (G) Solvent / curing (G) Dialkyl agent imidazolium salt [[Page 11408]] P-10-0090 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18- laundry care unsaturated, dimers, products hydrogenated, polymers with 1,6- diisocyanatohexane, polypropylene glycol diamine and polypropylene glycol mono(2- aminomethylethyl) ether ether with trimethylolpropane (3:1) P-10-0091 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18- laundry care unsaturated, dimers, products hydrogenated, polymers with 4- aminobenzoic acid, 1,6- diisocyanatohexane, polypropylene glycol diamine and polypropylene glycol mono(2- aminomethylethyl) ether ether with trimethylolpropane (3:1) P-10-0092 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18- laundry care unsaturated, dimers, products hydrogenated, polymers with polymethylenepolyphe nylene isocyanate, polypropylene glycol diamine and polypropylene glycol mono(2- aminomethylethyl) ether ether with trimethylolpropane (3:1) P-10-0093 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18- laundry care unsaturated, dimers, products hydrogenated, polymers with 4- aminobenzoic acid, polymethylenepolyphe nylene isocyanate, polypropylene glycol diamine and polypropylene glycol mono(2- aminomethylethyl) ether ether with trimethylolpropane (3:1) P-10-0094 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18- laundry care unsaturated, dimers, products polymers with 4- aminobenzoic acid, 1,6- diisocyanatohexane, polypropylene glycol diamine and polypropylene glycol mono(2- aminomethylethyl) ether ether with trimethylolpropane (3:1) P-10-0095 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18- laundry care unsaturated, dimers, products polymers with 4- aminobenzoic acid, polymethylenepolyphe nylene isocyanate, polypropylene glycol diamine and polypropylene glycol mono(2- aminomethylethyl) ether ether with trimethylolpropane (3:1) P-10-0096 11/30/09 02/27/10 CBI (G) Industrial (G) Aminated epoxy coating binder salts P-10-0097 11/30/09 02/27/10 CBI (G) Industrial (G) Aminated epoxy coating additive for salt electrocoat P-10-0098 11/25/09 02/22/10 CBI (G) Additive for (G) 2-propenoic acid, pigment ink 2-methyl-, polymer with substituted esters with acrylic acid and 2-propenoic acid P-10-0099 12/02/09 03/01/10 CBI (G) Modifier for (S) Phosphonic acid, polymers p-octyl-, lanthanum(3+) salt (2:1) P-10-0100 12/03/09 03/02/10 CBI (G) Additive, open, (G) Polyester amine non-dispersive use compound P-10-0101 12/03/09 03/02/10 CBI (G) Chemical (G) Aromatic intermediate polyester P-10-0102 12/03/09 03/02/10 Robertet, Inc. (S) As an odoriferous (S) Definition: component of Extractives and fragrance compounds their physically modified derivatives jasminum sambac. P-10-0102 12/03/09 03/02/10 Robertet, Inc. (S) As an odoriferous (S) Oils, jasmine, component of jasminum sambac fragrance compounds [[Page 11409]] P-10-0103 12/04/09 03/03/10 CBI (G) Resin for ultra (S) Fatty acids, C18- violet curable unsaturated, di-me adhesives esters, hydrogenated, polymers with diethylene glycol, 1,6-diisocyanato- 2,2,4- trimethylhexane, 1,6- diisocyanato-2,4,4- trimethylhexane, 2- heptyl-3,4-bis(9- isocyanatononyl)-1- pentylcyclohexane, 1,1'-methylenebis[4- isocyanatobenzene], 2-oxepanone and tricyclodecanedimeth anol, 2-hydroxyethyl acrylate-blocked P-10-0104 12/08/09 03/07/10 Henkel Corporation (S) Fragrance for (S) Silicic acid, 1- fabric softener ethenylhexyl ethyl ester P-10-0105 12/09/09 03/08/10 CBI (S) Plasticizer for (S) 1,2-cyclohexane use with pvc and dicarboxylic acid rubber bis (2-ethylhexyl) ester P-10-0106 12/10/09 03/09/10 Instrumental Polymer (G) Resin for (G) Hydroxyl - Technologies, LLC coatings terminated aliphatic polycarbonate P-10-0107 12/10/09 03/09/10 CBI (G) (1) Polymer (S) Multiwall carbon composites : Open, nanotubes non-dispersive use; (2) Liquid dispersions : Open, non-dispersive use; (3) Liquid dispersion : Contained use P-10-0108 12/10/09 03/09/10 CBI (S) Antioxidant for (G) Thioether plastic articles antioxidant P-10-0109 12/08/09 03/07/10 CBI (G) Coating additive (G) Urethane acrylate oligomer P-10-0110 12/11/09 03/10/10 CBI (G) Detergent (G) Polyester P-10-0111 12/10/09 03/09/10 The Dow Chemical (S) Component rigid (G) Benzene Company polyurethane foams dicarboxylic acid, for construction polyester with panels; component glycol and rigid polyurethane polyethylene glycol foam for appliances; component rigid foam spray applications P-10-0112 12/10/09 03/09/10 The Dow Chemical (S) Component rigid (G) Benzene Company polyurethane foams dicarboxylic acid, for construction polyester with panels; component glycol and rigid polyurethane polyethylene glycol foam for appliances; component rigid foam spray applications P-10-0113 12/10/09 03/09/10 The Dow chemical (S) Component rigid (G) Benzene Company polyurethane foams dicarboxylic acid, for construction polyester with panels; component glycol and rigid polyurethane polyethylene glycol foam for appliances; component rigid foam spray applications P-10-0114 12/10/09 03/09/10 The Dow Chemical (S) Component rigid (G) Benzene Company polyurethane foams dicarboxylic acid, for construction polyester with panels; component glycol and rigid polyurethane polyethylene glycol foam for appliances; component rigid foam spray applications P-10-0115 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-19 (nanofiber additive for grade: XT-PS composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0116 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-19 (nanofiber additive for grade: XT-LHT) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0117 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-19 (nanofiber additive for grade: XT-HHT) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0118 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-24 (nanofiber additive for grade: XT-PS) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0119 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-24 (nanofiber additive for grade: XT-LHT) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0120 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-24 (nanofiber additive for grade: XT-HHT) composites; mechanical reinforcement for composites; additive for battery electrodes [[Page 11410]] P-10-0121 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-19 (nanofiber additive for grade: XT-PS-AM) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0122 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-19 (nanofiber additive for grade: XT-LHT-AM) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0123 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-19 (nanofiber additive for grade: XT-HHT-AM) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0124 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-24 (nanofiber additive for grade: XT-PS-AM) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0125 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-24 (nanofiber additive for grade: XT-LHT-AM) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0126 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type: conductivity PR-24 (nanofiber additive for grade: XT-HHT-AM) composites; mechanical reinforcement for composites; additive for battery electrodes P-10-0127 12/14/09 03/13/10 CBI (G) Industrial (G) Blocked coating binder isocyanate crosslinker P-10-0128 12/14/09 03/13/10 CBI (G) Filling material (S) Siloxanes and silicones, di-me, 3- hydroxypropyl group- terminated, ethoxylated, polymers with 1,6- diisocyanato-2,2,4- trimethylhexane, 1,6- diisocyanato-2,4,4- trimethylhexane, polypropylene glycol ether with glycerol (3:1) and polypropylene glycol ether with pentaerythritol (4:1), polypropylene glycol mono-bu ether- blocked P-10-0129 12/16/09 03/15/10 Henkel Corporation (S) A polymerizable (S) Benzene, 1,3- component of bis(1-chloro-1- industrial adhesive methylethyl)-, and sealant reaction products with polyisobtutylene and trimethyl-2-propen-1- ylsilane P-10-0130 12/16/09 03/15/10 Alberdingk Boley, (S) Polyurethane (G) Linseed oil, Inc. coating for wood ester with pentaerythritol, polymer with .alpha.- hydro-.omega.- hydroxypoly(oxy-1,4- butanediyl), 3- hydroxy-2- (hydroxymethyl) 2- methylpropanoic acid and 5-isocyanato-1- (isocyanatomethyl)- alkylcyclohexane, compounds with triethylamine P-10-0131 12/16/09 03/15/10 CBI (G) Rheological (G) Polyester salt of additive for paints hydrogenated dimer of fatty acids and glycerol. P-10-0132 12/16/09 03/15/10 CBI (S) Catalyst (G) Aromatic complexing agent hydrocarbon P-10-0133 12/17/09 03/16/10 CBI (G) Chemical (G) Alkyl sulfide, intermediate - manufacture of, by- destructive use products from, distant lights P-10-0134 12/17/09 03/16/10 CBI (G) Chemical (G) Alkyl sulfide, intermediate - manufacture of, by- destructive use products from, distant lights P-10-0135 12/17/09 03/16/10 3M Company (G) Heat transfer (G) Fluoroketone fluid P-10-0136 12/17/09 03/16/10 CBI (G) Monomer for (G) Polythiol industrial paints, coatings, ink and adhesives P-10-0137 12/18/09 03/17/10 CBI (G) Coating agent (G) Substituted polyethyleneimine P-10-0138 12/18/09 03/17/10 CBI (G) Perfoemance (G) Long chain chemical for alkylacrylate, oilfield homopolymers applications P-10-0139 12/18/09 03/17/10 CBI (G) Perfoemance (G) Long chain chemical for alkylacrylate, oilfield homopolymers applications P-10-0140 12/18/09 03/17/10 CBI (G) Adhesive for car (G) Urethane modified epoxy resin P-10-0141 12/18/09 03/17/10 CBI (G) Adhesive (G) Carbohydrate component P-10-0142 12/22/09 03/21/10 CBI (G) Component of (G) Furan, 2-(1,1- fragrance mixture dimethylethyl)-2, 5- for highly- dihydro-alkyl dispersive substituted applications P-10-0143 12/22/09 03/21/10 Instrumental Polymer (G) Resin for (G) Hydroxyl- Technologies, LLC coatings terminated aliphatic polycarbonate [[Page 11411]] P-10-0144 12/22/09 03/21/10 Wacker Chemical (S) Additive for (G) Methyl-phenyl Corporation paper and foil silicone resin with coatings and bonding alkoxy groups agents P-10-0145 12/23/09 03/22/10 Henkel Corporation (S) Fragrance for (S) Silicic acid, 9- fabric softener decen-1-yl ethyl ester P-10-0146 12/23/09 03/22/10 CBI (G) Processing aid (G) Alkyl substituted polyamide P-10-0147 12/23/09 03/22/10 Huntsman Corporation (G) Intermediate (G) Alkoxylated amine alkylamine P-10-0148 12/23/09 03/22/10 CBI (G) Ethoxylation (G) Partially initiator fluorinated borate ester P-10-0149 12/23/09 03/22/10 Huntsman Corporation (G) Grinding aid (G) Alkoxylated alkylamine salt P-10-0150 12/24/09 03/23/10 Instrumental polymer (G) Resin for (G) Hydroxy - technologies, LLC coatings terminated; aliphatic polycarbonate P-10-0151 12/23/09 03/22/10 Henkel Corporation (S) Cure accelerator (S) 1,2-propanediol, in industrial 3-(3,4-dihydro-1(2H)- adhesive quinolinyl)- formulations P-10-0152 12/24/09 03/23/10 CBI (G) Filler dispersant (G) Phosphated polyalkoxylate P-10-0153 12/24/09 03/23/10 Sachem, Inc. (G) Chemical (S) 1H-imidazole, 1- intermediate (1-methylethyl)- P-10-0154 12/23/09 03/22/10 Henkel Corporation (S) Cure modifier in (S) Quinoline, 1- industrial adhesive butyl-1,2,3,4- formulations tetrahydro- P-10-0155 12/24/09 03/23/10 CBI (G) Open, non- (G) Acid-functional dispersive use. oligomer P-10-0156 12/23/09 03/22/10 Huntsman (S) Disperse dye for (G) Substituted International, LLC polyester fabrics phenyl azo substituted phenyl alkyl substituted indole P-10-0157 12/28/09 03/27/10 Henkel Corporation (S) A polymerizable (S) 2-propenoic acid, component in novel 2-methyl-, octahydro- adhesive and sealant 4, 7-methano-1h- formulations inden-5-yl ester P-10-0158 12/28/09 03/27/10 Henkel Corporation (S) A polymerizable (S) Disiloxane, component in 1,1,3,3-tetramethyl- industrial adhesive , polymer with 1,7- formulations octadiene P-10-0159 12/29/09 03/28/10 CBI (G) Coatings additive (G) Polycyclic polyamine diester organometallic compound P-10-0160 01/04/10 04/03/10 CBI (G) Lithographic inks (G) Polyester acrylate P-10-0161 01/04/10 04/03/10 Gelest, Inc. (S) Conversion to (S) Silane, isopropyldimethylchl dimethyl(1- orosilane; Research methylethyl)- P-10-0162 01/04/10 04/03/10 Gelest, Inc. (S) Conversion to (3- (S) Silane, isopropyldimethylsil chlorodimethyl(1- oxy)prop-1-yl methylethyl)- chloride; Research P-10-0163 01/04/10 04/03/10 Gelest, Inc. (S) Conversion to (S) Silane, (3- lithium reagent; chloropropoxy)dimeth Research yl(1-methylethyl)- P-10-0164 01/05/10 04/04/10 Worwag Coatings LLC (S) Automotive part (G) Aliphatic paint additive diisocyanates, modified dimer fatty acid, polyesterpolyol, bishydroxymethylprop ionic acid polymer P-10-0165 01/06/10 04/05/10 CBI (G) Printing additive (G) Polyester resin P-10-0166 01/07/10 04/06/10 CBI (G) Adhesive (G) 1,1'- component methylenebis[isocyan atobenzene], polymer with polyester polyols and a polyether polyol P-10-0167 01/08/10 04/07/10 CBI (G) Flame retardant (G) Brominated aromatic oligomer P-10-0168 01/11/10 04/10/10 CBI (S) Resin for (G) Polyester coatings for metal polyurethane P-10-0169 01/11/10 04/10/10 CBI (G) Chemical (G) Alkyl thiols, intermediate - manufacturer of, by- destructive use products from, distant heavies P-10-0170 01/12/10 04/11/10 CBI (G) Coatings (G) Urethane acrylate P-10-0171 01/13/10 04/12/10 Sachem, Inc. (G) Chemical (S) 1H-imidazolium, intermediate 1,3-bis(1- methylethyl)-, bromide P-10-0172 01/13/10 04/12/10 Sachem, Inc. (G) Destructive use (S) 1H-imidazolin, catalyst 1,3-bis(1- methylethyl)-, hydroxide P-10-0173 01/14/10 04/13/10 The Shepherd Chemical (G) Automotive (G) Vinylimidazole Company additive (VIMA) grafted poly alpha olefin (PAO) complexed with diisopropoxy titanium bis- acetylacetonate P-10-0174 01/14/10 04/13/10 The Shepherd Chemical (G) Automotive (G) Vinylimidazole Company additive (VIMA) grafted poly alpha olefin (PAO) complexed with molybdenum borate neodecanoate P-10-0175 01/14/10 04/13/10 CBI (G) Open (G) Aliphatic nondispersive hydroxyfunctional (component in polyester- polyurethane polyurethane coating) dispersion [[Page 11412]] P-10-0176 01/15/10 04/14/10 CBI (G) Electrographic (G) Aliphatic toner polycarboxylic acid, polymer with aromatic polycarboxylic acid and aliphatic polyol P-10-0177 01/19/10 04/18/10 Umicore Precious (S) Inhibited curing (G) PT carbonyl Metals NJ, LLC agent cyclosiloxane P-10-0178 01/19/10 04/18/10 Hitachi Chemical Co. (S) Adhesive for (S) 2-propenoic acid, America, Ltd. semiconductor 2-methyl-, 2- packages oxiranylmethyl ester, polymer with butyl 2-propenoate, ethyl 2-propenoate and 2-propenenitrile P-10-0179 01/19/10 04/18/10 CBI (G) Industrial liquid (G) Polymer of tall coatings oil fatty acid, aliphatic diols, aliphatic polyols, and aromatic acids P-10-0180 01/19/10 04/18/10 CBI (S) Curing agent or (G) Alkanediamines accelerator for polymer with 1,6- epoxy resin diisocyanatohexane, 1H-imidazole-1- propanamine -blocked P-10-0181 01/19/10 04/18/10 The Dow Chemical (G) Component of (G) Phenyl glycidyl Company electrical laminates ether derivative P-10-0182 01/19/10 04/18/10 CBI (G) Coated particles (G) Aromatic for support isocyanate reaction product with sand -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TME received: II. 1 Test Marketing Exemption Notices Received From: 10/26/09 to 1/22/10 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- T-10-0001 10/28/09 12/11/09 PPG Industries, Inc. (G) Component of a (G) Aromatic coating polyurethane -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: III. 117 Notices of Commencement From: 10/26/09 to 1/22/10 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-04-0179 11/17/09 11/10/09 (G) Tertiary amine carboxylic acid compound P-04-0426 12/01/09 10/27/09 (G) Dithiophosphate alkyl ester P-04-0456 11/04/09 10/23/09 (G) Neutralized acrylic polymer P-05-0080 12/28/09 12/08/09 (G) Chemical 1: Paraffinic light base oil P-05-0081 12/28/09 12/08/09 (G) Paraffinic heavy base oil P-05-0082 12/28/09 12/08/09 (G) Hydrotreated middle distillate P-05-0083 12/28/09 12/08/09 (G) Light catalytic cracked distillate P-05-0084 12/28/09 12/08/09 (G) Hydrocracked light distillate P-05-0085 12/28/09 12/08/09 (G) Hydrotreated light distillate P-05-0086 12/28/09 12/08/09 (G) Hydrocracked heavy distillate P-05-0088 11/16/09 10/24/09 (G) Branched and linear hydrocarbons P-05-0090 12/28/09 12/08/09 (G) Chemical 1: Heavy naphtha P-05-0091 12/28/09 12/08/09 (G) Chemical 2: Hydrocracked heavy naphtha P-05-0092 12/28/09 12/08/09 (G) Hydrodesulfurized heavy naphtha P-05-0093 12/28/09 12/08/09 (G) Neutralized light naphtha P-05-0094 12/28/09 12/08/09 (G) Hydrotreated heavy naphtha P-05-0095 12/28/09 12/08/09 (G) Catalytic cracked heavy naphtha P-05-0096 12/28/09 12/08/09 (G) Chemical 1: Light naphtha P-05-0097 12/28/09 12/08/09 (G) Chemical 2: Hydrocracked light naphtha P-05-0098 12/28/09 12/08/09 (G) Hydrodesulfurized light naphtha P-05-0099 12/28/09 12/08/09 (G) Neutralized light naphtha P-05-0100 12/28/09 12/08/09 (G) Catalytic cracked light naphtha P-05-0101 12/28/09 12/08/09 (G) Hydrotreated light naphtha P-07-0013 01/06/10 12/07/09 (G) Alkylphenol novolak modified with amine and epoxy P-07-0356 12/23/09 12/14/09 (G) Polymer with aliphatic diisocyanates, polycarbonatediol and bishydroxymethylproionic acid [[Page 11413]] P-07-0358 01/06/10 12/18/09 (G) Hexitol, anhydro-, bis[[(1-oxo-2- propenyl)oxy]benzoate], polymer with phenylene bis[[(1-oxo-2- propenyl)oxy]alkyl(C1- C10)oxy benzoate] P-07-0418 10/28/09 09/16/09 (G) Hydrogenated polyalphaolefins P-07-0435 12/23/09 12/14/09 (G) Copolymer of acrylic acrylates, methacrylates and acid P-07-0586 11/10/09 10/30/09 (G) Polydimethysaline P-07-0622 11/02/09 10/23/09 (G) Alkanoldioic acid, dialkyl ester P-08-0046 11/30/09 11/20/09 (G) Mixed metal oxide complex P-08-0047 11/30/09 11/11/09 (G) Metal oxide complex P-08-0069 12/07/09 11/18/09 (G) Alkenyl succinimide P-08-0179 12/15/09 12/03/09 (G) 1,2,3- propanetricarboxamide derivative P-08-0219 12/30/09 12/28/09 (S) 1,3-cyclopentadiene, 5- butyl- P-08-0238 11/02/09 10/12/09 (G) Water-borne silicone grafted (meth)acrylic copolymer P-08-0508 10/26/09 10/05/09 (G) Perfluorinated aliphatic carboxylic acid P-08-0631 11/16/09 11/04/09 (G) Alkenoic acid polymer with (poly)hydroxy substituted alkane, ester with acryloylcarbamic acid P-08-0669 11/10/09 11/03/09 (G) Urethane acrylate P-08-0670 12/11/09 11/03/09 (G) Urethane acrylate P-08-0707 11/19/09 11/01/09 (S) 2H-2,4A- methanonaphthalen-1(5H)- one, hexahydro-5,5- dimethyl- P-09-0048 10/28/09 10/06/09 (G) Surface modified ceramic particles P-09-0061 12/11/09 12/08/09 (G) Hydroxy-chloro- cyclopropyl- heteromonocycliccarboxyli c acid P-09-0075 11/03/09 10/09/09 (G) Aliphatic, aromatic unsaturated bicyclic derivative P-09-0076 12/08/09 11/26/09 (G) Diamino - (substituted phenylazo) - benzene sulfonic acid, salt P-09-0115 11/02/09 10/07/09 (G) Alkanedioic acid, polymer with N- (aminoalkyl)- alkyldiamine, (chloromethyl)oxirane and alkylpolyol, acid salt P-09-0120 01/05/10 12/14/09 (G) Epoxidized siloxane P-09-0127 01/11/10 12/19/09 (G) Aliphatic polyurethane resin aqueous dispersion P-09-0141 01/19/10 12/18/09 (G) 1,3-ethyl, methylimidazolium undecafluoro substituted ionic methalic species P-09-0160 12/07/09 11/26/09 (G) 2-propenoic acid, polymer with butyl 2- propenoate, (2,3,4,5,6- pentabromophenyl) methyl 2-propenoate and substitute acrylates P-09-0165 11/03/09 07/07/09 (G) Modified, saturated polyester resin P-09-0166 11/16/09 11/10/09 (G) Butylated melamine P-09-0172 12/15/09 12/04/09 (G) Substituted carboxylic acid reaction product with substituted amine and amide, acetates P-09-0174 12/09/09 11/13/09 (G) Perfluoroalkylethylmethac rylate copolymer P-09-0200 01/14/10 11/15/09 (G) Alkanoic acid, potassium salt P-09-0210 12/08/09 11/23/09 (G) Furandione polymer with ethenylbenzene, alkyl ester P-09-0245 12/16/09 12/14/09 (G) Partially fluorinated alcohol, reaction products with phosphorus oxide (P2O5), ammonium salts P-09-0246 12/29/09 12/22/09 (G) Partially fluorinated alcohol, reaction products with phosphorus oxide (P2O5) P-09-0247 12/28/09 12/05/09 (G) Acrylamide-based copolymer P-09-0253 12/11/09 11/27/09 (G) Polyether polyester copolymer phosphate P-09-0254 11/06/09 11/02/09 (G) Polyacrylate, modified with siloxanes P-09-0257 11/24/09 10/18/09 (S) Multi-wall carbon nanotube P-09-0271 11/27/09 11/17/09 (G) Aryl alkylphosphonate P-09-0279 11/02/09 10/29/09 (G) Styrene-maleic anhydride copolymer, reaction product with amino compounds P-09-0286 11/06/09 10/28/09 (G) Poly(oxyalkylenediyl), a-substituted carbomonocycle-.omega.- substituted carbomonocycle P-09-0289 10/27/09 08/05/09 (G) Solid epoxy resin P-09-0308 11/16/09 11/05/09 (G) Amine modified polyester acrylate P-09-0347 11/05/09 10/09/09 (G) Alkyl diphenyl ether P-09-0374 11/23/09 10/30/09 (G) Fatty acids, polymers with adipic acid, 1,6- hexandiol, 3-hydroxy-2- (hydroxymethyl)-2- methylpropanoic acid and 1,1'-methylenebis[4- isocyanatocyclohexane], compounds with triethylamine P-09-0379 11/03/09 09/15/09 (G) High molecular weight polyester P-09-0386 11/09/09 10/14/09 (G) Alkenyl succinic anhydride P-09-0409 10/27/09 10/16/09 (G) Urethane acrylate P-09-0414 12/01/09 11/04/09 (G) Polyester resin P-09-0427 11/03/09 10/28/09 (G) Phenol, 4,4'-(1- methylethylidene)bis-, polymer with 2- (chloromethyl)oxirane, reaction products with dithiol P-09-0428 12/17/09 12/10/09 (G) Mixed metal oxide complex P-09-0435 11/10/09 11/02/09 (S) 6,8-dimethyl-7-nonenal P-09-0451 12/22/09 12/09/09 (G) Butanamide, N- [substituted phenyl]- [(alkoxynitrophenyl)diaze nyl]-3-oxo- P-09-0453 11/04/09 10/27/09 (G) Urethane prepolymer P-09-0454 01/05/10 11/16/09 (G) Polyurethane P-09-0477 11/12/09 11/06/09 (G) Fluoroalkyl sulfonamide P-09-0478 12/23/09 12/10/09 (G) Modified polyol P-09-0481 12/22/09 12/02/09 (G) Fluorinated polymer P-09-0485 11/13/09 11/07/09 (G) Fluorinated sulfonamide alcohol P-09-0490 12/09/09 11/18/09 (S) 2H-1,5-benzodioxepin-3 (4H)-one, 7-(1- methylethyl)- [[Page 11414]] P-09-0498 12/14/09 12/07/09 (G) Aromatic dicarboxylic acid, polymer with cycloaliphatic diamine, 2- (chloromethyl)oxirane, alkyldioic acid and an aryl diphenol P-09-0499 12/30/09 10/21/09 (G) Aromatic polyether polymer P-09-0511 12/08/09 12/03/09 (G) Fluoroalkyl acrylate copolymer P-09-0531 11/30/09 11/12/09 (G) Acrylic solution polymer P-09-0534 01/05/10 11/16/09 (G) Carbamic acid, (methylenedicyclohexanedi yl)bis-mixed diesters with polyethylene glycol and polyethylene glycol mono ethers P-09-0536 01/05/10 11/16/09 (G) Carbamic acid, (methylenedicyclohexanedi yl)bis-mixed diesters with unsaturated alcohols, polyethylene glycol and polyethylene glycol mono ethers P-09-0537 01/05/10 11/16/09 (G) Polyethylene glycol, alpha, alpha', alpha''- propanetrilmonoesters with [[[carboxyaminitrimethylc yclohexyl]methyl]amino]ca rbonyl]- octadecenyloxy)polyethyle ne glycol P-09-0538 01/05/10 11/16/09 (G) Carbamic acid, (methylenedicyclohexanedi yl)bis-mixed diesters with isoalcohols, polyethylene glycol and polyethylene glycol mono ethers P-09-0539 01/05/10 11/16/09 (G) Carbamic acid, (trimethylhexanediyl)bis- mixed diesters with unsaturated alcohols, isoalcohols and polyethylene glycol P-09-0544 12/10/09 12/01/09 (G) Polyalkyleneglycol, reaction products with hydroxyalkyl acrylate, dihydroxyalkyl alkanoic acid, sodium-aminoalkyl- alaninate, sodium salt P-09-0555 11/30/09 11/18/09 (G) Acrylate, polymer with aromatic vinyl monomer and acrylates P-09-0564 12/07/09 11/20/09 (G) Polyurethane prepolymer P-09-0570 12/28/09 12/04/09 (G) Alkyl thiol, manufacturer of, by- products from, distant heavies P-09-0572 12/23/09 12/10/09 (G) Alkyl thiol, manufacturer of, by- products from, distant heavies P-09-0573 12/23/09 12/04/09 (G) Alkyl thiol, manufacturer of, by- products from, distant residues heavies P-09-0575 12/18/09 12/13/09 (G) Naphthalenesulfonic acid, [(chloro-methyl- sulfophenyl)diazenyl]- hydroxy-metal salt P-09-0578 12/18/09 12/13/09 (G) Naphthalenesulfonic acid, [(methyl- sulfophenyl)diazenyl]- hydroxy-metal salt P-09-0581 12/30/09 12/16/09 (G) Styrenyl surface treated manganese ferrite P-09-0582 12/30/09 12/16/09 (G) Acrylate polymer stabilized manganese ferrite P-09-0583 01/14/10 12/16/09 (G) Anthraquinone acid dye salt P-09-0584 01/14/10 12/16/09 (G) Copper phthalocyanine direct dye salt P-09-0585 12/07/09 11/20/09 (G) Polymer of aliphatic cyclic methacrylic acid and aliphatic methacrylic acid ester P-09-0587 12/08/09 11/24/09 (S) Butanedioic acid, 2- methylene-, monoisooctadecyl ester P-09-0588 12/08/09 11/25/09 (S) Butanedioic acid, 2- methylene-, monoisooctadecyl ester, palladium(2+) salt (2:1) P-09-0592 01/13/10 12/22/09 (G) Aqueous polyurethane resin dispersion P-09-0598 12/18/09 12/07/09 (G) Alkyl acrylic acid, polymer with alkyl acrylate alkyl ester and alkyldiyl diacrylate P-09-0600 12/30/09 11/29/09 (G) Alkyl thiol, manufacturer of, by- products from, distant lights P-09-0612 12/07/09 11/30/09 (G) Silane treated glass P-09-0615 01/19/10 01/07/10 (S) Alkenes, C26-30 .alpha.-, polyoumd. P-10-0003 01/19/10 01/12/10 (G) Alkyl thiol, manufacturer of by- products from, distant lights P-10-0004 01/19/10 01/12/10 (G) Alkyl thiol, manufacturer of by- products from, distant residues P-97-1011 12/14/09 06/05/98 (S) Oxirane, 2,2'- (methylenebis ((2,6- dimethyl-4,1phenylene) oxymethylene))bis- P-98-0543 01/13/10 12/31/09 (G) Polyurethane with carboxy functions ---------------------------------------------------------------------------------------------------------------- List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: March 1, 2010. Chandler Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2010-5129 Filed 3-9-10; 8:45 am] BILLING CODE 6560-50-S