[Federal Register Volume 75, Number 47 (Thursday, March 11, 2010)]
[Proposed Rules]
[Pages 11483-11502]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-5152]
[[Page 11483]]
=======================================================================
-----------------------------------------------------------------------
FEDERAL TRADE COMMISSION
16 CFR Part 305
RIN 3084-AB15
Rule Concerning Disclosures Regarding Energy Consumption and
Water Use of Certain Home Appliances and Other Products Required Under
the Energy Policy and Conservation Act (``Appliance Labeling Rule'')
AGENCY: Federal Trade Commission (FTC or Commission).
ACTION: Notice of proposed rulemaking and public meeting announcement.
-----------------------------------------------------------------------
SUMMARY: Section 325 of the Energy Independence and Security Act of
2007 provides the Commission with authority to promulgate energy
labeling rules for certain consumer electronics, including televisions.
On March 16, 2009, the Commission sought comment on whether it should
require energy disclosures for these products. After reviewing the
comments received, the Commission is proposing to require EnergyGuide
labels on televisions to help consumers with their purchasing
decisions. As part of this effort, the Commission has scheduled a
public meeting on April 16, 2010, from 9:00 a.m. to 1:00 p.m.
DATES: Written comments must be received on or before May 14, 2010.
ADDRESSES: Interested parties are invited to submit written comments
electronically or in paper form by following the instructions in
section IX of the SUPPLEMENTARY INFORMATION section below. Comments in
electronic form should be submitted using the following weblink:
(https://public.commentworks.com/ftc/tvdisclosures) (and following the
instructions on the web-based form). Comments filed in paper form
should be mailed or delivered to the following address: Federal Trade
Commission, Office of the Secretary, Room H-135 (Annex T), 600
Pennsylvania Avenue, N.W., Washington, DC 20580, in the manner detailed
in the SUPPLEMENTARY INFORMATION section below.
FOR FURTHER INFORMATION CONTACT: Hampton Newsome, (202) 326-2889,
Attorney, Division of Enforcement, Bureau of Consumer Protection,
Federal Trade Commission, Room M-8102B, 600 Pennsylvania Avenue, N.W.,
Washington, DC 20580.
SUPPLEMENTARY INFORMATION:
I. Introduction
Section 325 of the Energy Independence and Security Act of 2007
(EISA) (Pub. L. 110-140) authorizes the Commission to require energy
disclosures for certain consumer electronics, including televisions,
personal computers, cable or satellite set-top boxes, stand-alone
digital video recorder boxes, and personal computer monitors.\1\ On
March 16, 2009, the Commission sought comment on whether to require
energy disclosures for these products.\2\ After reviewing the comments,
the Commission proposes requiring ``EnergyGuide'' labels for
televisions. The Commission does not propose requirements for other
consumer electronics at this time, but seeks further comment on test
procedures and other issues related to these products.
---------------------------------------------------------------------------
\1\ EISA amends the Energy Policy and Conservation Act (42
U.S.C. 6291 et seq).
\2\ 74 FR 11045 (Mar. 16, 2009).
---------------------------------------------------------------------------
This Notice first provides background on the Commission's current
energy labeling requirements and its previous consideration of
television labeling requirements. Next, it explains the Commission's
new labeling authority under EISA and why requiring television energy
usage disclosures is proper under that statute. The Notice then details
the content, format, and location of those proposed disclosures.
Finally, it seeks comment on the proposed disclosures and on possible
disclosure requirements for other consumer electronics.
II. Current Energy Labeling Requirements
The Commission's Appliance Labeling Rule (16 CFR Part 305) requires
energy disclosures for a variety of covered products, including home
appliances, lighting, and plumbing products. The Rule requires most
covered products to have, at the point of sale, yellow EnergyGuide
labels containing estimated annual operating cost information based on
Department of Energy (DOE) test procedures. The label information must
also appear in catalogs and on Internet sites offering the products for
sale.\3\ The Rule allows manufacturers to place the U.S. Government
ENERGY STAR logo on labels for products that qualify for that
program.\4\
---------------------------------------------------------------------------
\3\ The Commission's Rule requires manufacturers of most covered
products to file reports with the FTC. These reports must contain
the estimated annual energy consumption or energy efficiency ratings
for the appliances derived from tests performed pursuant to DOE test
procedures. 16 CFR 305.8(b).
\4\ ENERGY STAR is a voluntary government labeling program that
identifies high-efficiency products. The Environmental Protection
Agency (EPA) and DOE administer the ENERGY STAR program. See (http://www.energystar.gov).
---------------------------------------------------------------------------
III. Previous Consideration of Televisions
In 1979, the Commission determined not to require labeling for
televisions because annual energy cost varied little between competing
models and because such costs amounted to a small fraction of the
purchase price. Thus, the Commission concluded that television labels
were unlikely to benefit consumers.\5\
---------------------------------------------------------------------------
\5\ 44 FR 66466, 66468 (Nov. 19, 1979).
---------------------------------------------------------------------------
In 2007, the Commission revisited the issue as part of a broad
review of the EnergyGuide label's effectiveness.\6\ In response,
several commenters urged the Commission to require television labels
because many modern televisions use as much, or more, electricity than
products currently labeled under the Rule. In addition, commenters
indicated a significant range of energy use between similar
products.\7\ In short, television energy consumption has changed
significantly since the 1970s.
---------------------------------------------------------------------------
\6\ 72 FR 6836, 6857 (Feb. 13, 2007).
\7\ According to the Natural Resources Defense Council (NRDC)
comments during the 2007 proceeding, there are many ``large-screen''
digital televisions on the market that use 500 or more kilowatt-
hours per year, as much energy as many new refrigerators. NRDC
(519870-00025). At an FTC public workshop held during the
2007 proceeding, one participant suggested that the average 42-inch
plasma television draws 334 watts, with models ranging from 201
watts to 520 watts. Workshop Tr. at 198 (http://www.ftc.gov/os/comments/energylabeling-workshop/060503wrkshoptrnscript.pdf).
---------------------------------------------------------------------------
After considering these comments, the Commission concluded that
energy labeling for televisions may assist consumers in purchasing
decisions, but noted that the outdated DOE test procedures could not
adequately test most televisions.\8\ Because the law at that time
required DOE test procedures for FTC labels, the Commission could not
require television energy disclosures.
---------------------------------------------------------------------------
\8\ 72 FR 49948, 49962 (Aug. 29, 2007). See also 72 FR at 6858
(Feb. 13, 2007). Until recently, DOE's regulations contained a test
procedure created for analog cathode-ray tube (CRT) products and
relied on a black and white static test pattern. Since the
publication of the ANPR, DOE has repealed its television test
procedure. 74 FR 53640 (Oct. 20, 2009).
---------------------------------------------------------------------------
IV. FTC's New Authority for Consumer Electronics Labeling
In late 2007, Congress amended the Energy Policy and Conservation
Act (EPCA) (42 U.S.C. 6294) to authorize the Commission to prescribe
labels for televisions and certain other consumer electronics, subject
to specific provisions.\9\ If DOE publishes applicable test procedures
for those specified consumer electronics, the Commission must issue
disclosure requirements
[[Page 11484]]
within 18 months of DOE's publication. Absent those procedures, the
EPCA amendments give the Commission discretion to require disclosures
if it identifies adequate non-DOE testing procedures and finds that
disclosures will likely assist consumers in making purchasing
decisions. Regardless of whether DOE test procedures exist, the
Commission cannot require disclosures if those disclosures are not
technically or economically feasible.\10\ The amended law empowers the
Commission to consider other types of energy disclosures in lieu of
traditional product labels for these consumer electronics.\11\ Finally,
the amendments provide the Commission with authority to require
labeling or other disclosures for any other consumer product if the FTC
determines such labeling is likely to assist consumers in making
purchasing decisions.\12\
---------------------------------------------------------------------------
\9\ 42 U.S.C. 6294(a)(2)(I).
\10\ 42 U.S.C. 6294(a)(2)(I)(iv).
\11\ Specifically, the EPCA empowers the Commission to
``prescribe labeling or other disclosure requirements for the energy
use of'' the covered consumer electronic products. 42 U.S.C.
6294(a)(2)(I)(i) (emphasis added).
\12\ Under EPCA, a ``consumer product'' means any article which
consumes, or is designed to consume energy and which, to any
significant extent, is distributed in commerce for personal use or
consumption by individuals. 42 U.S.C. 6291(1). As with the five
consumer electronic categories specifically listed in the EISA
amendments, the FTC may identify a non-DOE test procedure for
labeling such additional consumer products (in the absence of a DOE
test procedure) and has discretion to require comparative
information on the label.
---------------------------------------------------------------------------
V. FTC's Advance Notice of Proposed Rulemaking
In response to these amendments, on March 16, 2009, the Commission
published an Advance Notice of Proposed Rulemaking seeking comment on
the need for energy disclosures for televisions and other consumer
electronics.\13\ Given the lack of a DOE test procedure applicable to
modern televisions, the Notice also sought comment on the adoption of
non-DOE test procedures currently used by the ENERGY STAR program. In
addition, the Notice requested comment on the appropriate format for
any television energy disclosures, specifically asking whether such
disclosures should be made using the yellow EnergyGuide label or
whether the disclosures should have alternative formats and locations.
Finally, the Notice invited comment about the need for energy
disclosures for personal computers, cable or satellite set-top boxes,
stand-alone digital video recorder boxes, personal computer monitors,
and other consumer electronic products.
---------------------------------------------------------------------------
\13\ 74 FR 11045 (Mar. 16, 2009).
---------------------------------------------------------------------------
The Commission received eight comments in response.\14\ In this
Notice, the Commission first analyzes the comments regarding television
labeling, and then discusses the comments regarding other consumer
electronics.
---------------------------------------------------------------------------
\14\ The comments can be found at (http://www.ftc.gov/os/comments/tvenergylabels/index.shtm). Unless otherwise stated, the
citations for the comments in this Notice are: Consortium for Energy
Efficiency (CEE) 540779-00006; Consumer Electronics
Association (CEA) 540779-00007; Consumer Electronics
Retailers Coalition (CERC) 540779-00010; Mitsubishi Digital
Electronics America, Inc. (Mistubishi) 540779-00005;
Motorola, Inc. 540779-00004; Natural Resources Defense
Council (NRDC) 540779-00003; New York State Assemblyman
Robert Sweeney (Sweeney) 540779-00002; and Lonny Paul
(Paul) 540779-00001.
---------------------------------------------------------------------------
VI. Proposed Television Energy Disclosures
The Commission proposes requiring energy disclosures for
televisions. Disclosures are appropriate because they likely will help
consumers in making purchasing decisions, the disclosures are not
technologically or economically infeasible, and there is an adequate
energy test procedure. Given these preliminary conclusions, the
Proposed Rule would require manufacturers to measure energy use for
such disclosures using test procedures recently adopted by the ENERGY
STAR program. The television's estimated annual energy cost and use
would appear on a newly designed EnergyGuide label affixed to the
product itself. Finally, the proposed amendments would require Internet
and paper catalog sellers to provide consumers with the same
information that appears on the label.
A. The Need For Television Disclosures
Under the EISA amendments, the Commission has authority to require
television disclosures if it determines such disclosures are likely to
assist consumers in making purchasing decisions. As discussed below,
the commenters generally supported energy disclosures\15\ for
televisions and indicated that they would assist consumers because: 1)
these products use a significant amount of energy; 2) energy use among
models differs substantially; and 3) consumers are likely to use this
information prior to purchase. Moreover, no commenters argued that
energy disclosures for televisions are technologically or economically
infeasible.
---------------------------------------------------------------------------
\15\ For example, New York State Assemblyman Robert Sweeney
wrote that this information will ``allow consumers to more easily
weigh energy costs in purchasing,'' and ``encourage the design of
products with greater energy efficiency . . . .'' Similarly, the
CERC concluded that ``disclosures, properly implemented and executed
can help consumers make educated purchasing decisions.''
---------------------------------------------------------------------------
First, the commenters suggest that televisions account for a
significant amount of energy use in the home. CEE stated that
disclosures are necessary because televisions ``are one of the largest
energy users within a home . . . their energy use has increased
significantly in recent years, and there has been notable technical
advancement.'' Consistent with that view, NRDC estimated in 2004 that
televisions account for roughly 1% of the nation's energy use. NRDC
further noted that this number has probably increased ``due to the
growth in screen size, operating hours, and the number of installed
TVs.'' In NRDC's estimation, television ``now represents 10 to 20% of a
typical home's annual electricity use.'' Similarly, in a recent study,
the California Energy Commission found growth in television energy
consumption due to increases in flat panel sales, average screen size,
the number of televisions per household as well as lower prices for
high definition flat screen digital televisions and enhanced product
features (e.g., higher resolution).\16\ In addition, according to CEE,
ENERGY STAR data indicates that some televisions consume more than 500
kWh per year, as much electricity as many refrigerators.
---------------------------------------------------------------------------
\16\ Draft Efficiency Standards for Televisions, Phase 1, Part
C, Docket 07-AAER-03-C (http://www.energy.ca.gov/2008publications/CEC-400-2008-028/CEC-400-2008-028-SD.PDF) .
---------------------------------------------------------------------------
Second, not only is television energy use large, but it also varies
considerably among competing models. Though no comprehensive data is
available, some commenters identified significant variations. According
to Mitsubishi, for models with 65 inch screen sizes, the power
consumption can range from approximately 135 watts to 433 watts.
Similarly, for 52 inch LCD models, energy use ranges from 115 watts to
329 watts. In addition, NRDC cited to ENERGY STAR data showing that
energy use for 42 inch models ranges from approximately 110 watts to
210 watts.\17\ Mitsubishi also indicated that ``across display
technologies there is even more variance'' and that such differences
are likely to increase as manufacturers introduce ``novel new display
technologies.'' As Motorola noted, in the absence of energy
disclosures, even sophisticated consumers cannot determine energy cost
variance between models because
[[Page 11485]]
such information is difficult to calculate.
---------------------------------------------------------------------------
\17\ See NRDC comments; see also, (http://downloads.energystar.gov/bi/qplist/tv_prod_list.pdf) (ENERGY STAR
data).
---------------------------------------------------------------------------
Third, consumers will likely use energy information in making
purchasing decisions because, as explained below, they have an interest
in saving energy and, therefore, would likely compare energy efficiency
between models. CEA noted data demonstrating widespread consumer
concern over rising energy costs and, as a result, greater consumer
interest in energy efficient products. According to a CEA study, ``89
percent of consumers surveyed ranked energy efficiency as a top
consideration for their next television purchase, although price and
features remain most influential in actual purchasing decisions.'' In
addition, several commenters suggested that consumers would have even
more interest in energy use if they understood how much these products
used. For example, NRDC explained that, at present, most consumers are
not aware that one television may use two or three times as much energy
as a similar model. Moreover, as NRDC noted, retailers often display a
variety of models side-by-side to allow consumers to judge picture
quality. Thus, because consumers are likely to compare several models
while shopping, they are likely to use energy information when they are
making their purchasing decision.
Finally, in addition to the consumer benefits, the commenters
stated that television labeling is technologically and economically
feasible.\18\ For example, Mitsubishi wrote that energy testing is
inexpensive, nonintrusive, does not involve destruction of or damage to
units, and is performed generally in any case for other reasons (such
as ENERGY STAR). Similarly, CEA indicated that it ``was not aware of
any such evidence that argues against providing energy use disclosures
for televisions.''\19\ Indeed, no commenters suggested that energy
disclosures would raise economic or technological feasibility
questions.
---------------------------------------------------------------------------
\18\ The Commission cannot require disclosures if it determines
they would be technologically or economically infeasible. 42 U.S.C.
6294(a)(2)(I)(iv).
\19\ Although the commenters generally supported disclosure
requirements, CEA argued that ``there should be evidence to show
that the buying judgements of a substantial majority of consumers
would be affected by the availability of energy use information on
products'' prior to imposing any disclosure requirements. However,
the law does not contain such a ``substantial majority'' test but,
instead, allows disclosure requirements if the Commission finds such
disclosures ``are likely to assist consumers in making purchasing
decisions.'' 42 U.S.C. 6294(a)(2)(I).
---------------------------------------------------------------------------
B. Determining Energy Usage
In recent years, the lack of DOE test procedures for modern
televisions has served as a barrier to energy disclosures. However,
EPCA now authorizes the Commission to use ``adequate non-Department of
Energy test procedures,'' and such procedures now exist for
televisions. Specifically, EPA's ENERGY STAR program recently adopted
criteria for televisions based on specific international procedures
(Section 11 of ``IEC 62087, Ed. 2.0: Methods of Measurement for the
Power Consumption of Audio, Video and Related Equipment'' and ``IEC
62301, Ed. 1.0: Household Electrical Appliances - Measurement of
Standby Power'').\20\ The procedures require manufacturers to measure
the power consumed by televisions when the products are on, and in
standby mode (i.e., when the product is switched off).
---------------------------------------------------------------------------
\20\ See International Electrotechnical Commission (http://www.iec.ch); and ``ENERGY STAR Program Requirements for Televisions
Eligibility Criteria (Version 4.0 and 5.0)'' (http://www.energystar.gov/ia/partners/prod_development/revisions/downloads/television/Final_Version%204_5_TV_Program_Requirements.pdf).
---------------------------------------------------------------------------
In the ANPR, the Commission sought comments on these test
procedures. Several commenters recommended that the Commission require
the IEC procedures as currently adopted by the ENERGY STAR program.\21\
These commenters stated that this would ensure uniformity across the
U.S. government.\22\ Furthermore, no other commenter raised significant
concerns with the IEC test or proposed alternative procedures.
---------------------------------------------------------------------------
\21\ See, e.g., CEA, CERC, Mitsibushi, and NRDC comments.
\22\ CEA and CERC comments.
---------------------------------------------------------------------------
Consistent with commenter suggestions, the Commission proposes to
require manufacturers to use the IEC procedures as adopted by the
ENERGY STAR program. Indeed, the ENERGY STAR criteria offer advantages
over the IEC test alone because ENERGY STAR makes mandatory several
procedures which the IEC test leaves optional. For instance, the IEC
procedure allows the use of either a dynamic or static video signal for
testing (i.e., either moving or static images), while ENERGY STAR
specifies the use of dynamic images only.\23\ In addition, the ENERGY
STAR criteria provide more detail regarding the brightness setting
under which televisions must be tested because brightness levels can
affect a model's energy use. Specifically, ENERGY STAR requires testing
at the brightness setting in which the model is shipped. If a model
requires consumers to select a brightness mode upon installation (i.e.,
a forced menu), the manufacturer must test that model at the ``home''
or ``standard'' mode. If the model has an automatic brightness control
feature which adjusts brightness to ambient light levels, then the
ENERGY STAR criteria require testing at a combination of room light
levels.\24\ Using these various criteria, the ENERGY STAR tests seek to
reflect the manner in which consumers are likely to use the product in
their homes. Lastly, as noted by the commenters, adopting the ENERGY
STAR program requirements will avoid imposing two separate Federal
government tests for measuring television energy use.\25\
---------------------------------------------------------------------------
\23\ NRDC urged the Commission to require use of dynamic images.
\24\ NRDC suggested that the FTC provide guidance on brightness,
including whether to test models in a certain mode or at a certain
percentage of full brightness. NRDC asked the FTC to provide
standardized guidance on measuring the energy use of models with an
automatic brightness feature. The ENERGY STAR criteria offer such a
standard.
\25\ The Proposed Rule also contains a definition of the term
``television'' that is consistent with the coverage of ENERGY STAR
criteria for televisions.
---------------------------------------------------------------------------
Finally, the Commission notes two additional issues related to test
procedures. First, in a recent notice repealing the existing test
procedure, DOE announced that it soon will develop a Federal test
procedure and energy efficiency standards for televisions.\26\ In doing
so, DOE indicated that it ``will give serious consideration to the
suggestion made by CEA that DOE adopt IEC 62087-2008(E).'' Second, CEA
stated that it is developing its own version of the test procedure that
consolidates ENERGY STAR's requirements into a more detailed protocol
(``CEA-2037, Determination of Television Average Power Consumption'').
However, to the Commission's knowledge, CEA has not published the
protocol. The Commission seeks comments on whether it should wait to
finalize disclosure rules until CEA, DOE, or both complete their work.
---------------------------------------------------------------------------
\26\ 74 FR 53640 (Oct. 20, 2009).
---------------------------------------------------------------------------
C. Location, Format, and Content of Energy Disclosures
The Commission proposes specific requirements for television energy
labels, including the location, format, and content of the labels. In
addition, the Commission proposes requirements for Internet and catalog
disclosures.
1. Location
For most products currently covered under the Appliance Labeling
Rule, the energy disclosures appear on yellow EnergyGuide labels
attached to the products themselves. In its ANPR, the Commission sought
comments on the location of television disclosures. Several commenters
recommended labeling televisions with an
[[Page 11486]]
EnergyGuide label on the product itself at the point of purchase.\27\
For example, Mitsubishi indicated that labels ``should substantially
follow the existing EnergyGuide format, content, and placement
requirements.'' According to NRDC, consumers continue to make the
majority of their individual purchases in stores, despite the fact that
some ``pre-shop'' on the Internet. Similarly, CEE stated that the most
effective energy disclosures are displayed while a consumer views
televisions for purchase.
---------------------------------------------------------------------------
\27\ See, e.g., CEE, Mitsubishi, NRDC, and Sweeney comments.
---------------------------------------------------------------------------
Some commenters urged the Commission to avoid imposing undue
burdens. For example, CEE emphasized that disclosures should be easy
for industry to manage. In addition, CEA urged that the ``FTC should
carefully consider cost impacts while determining how to best serve
consumers and minimize the economic impacts on government,
manufacturers, retailers, and distributors.'' CERC raised particular
concerns about the impact of potential requirements on retailers,
cautioning in particular against a disclosure regime that required
retailers to match labels to products on showroom floors.\28\ CERC
argued that the manufacturer, not the retailer, is in the best position
to label products and noted that disclosure requirements ``should be
consistent with America's modern and incredibly diverse retail
marketplace.''
---------------------------------------------------------------------------
\28\ CERC and Paul comments.
---------------------------------------------------------------------------
Although most commenters supported in-store product labeling, CEA
urged caution and recommended that the Commission conduct research to
understand consumer behavior, expectations, and perceptions before
proposing any particular disclosure method. Specifically, CEA
recommended consumer research on the effectiveness of various
disclosure methods, including Internet disclosures, in-store material,
product packaging, and product-related printed material.
After considering the comments, the Commission proposes requiring
television product labels similar to EnergyGuide labels for appliances.
The Commission agrees with commenters that energy labels will help
consumers choose televisions in retail stores. Retailers routinely
display operating televisions in showrooms and, as NRDC indicated,
models often appear in a line on walls or store shelves, allowing
consumers to compare products before purchasing. In addition, research
conducted in 2006 concluded that online sales accounted for only 6.4
percent of total television units sold.\29\ Although this number has
likely increased, the Commission has no information to suggest online
purchases dominate this market and expects that most consumers
comparison shop and/or purchase televisions from brick-and-mortar
stores. Furthermore, product labeling is preferable to other disclosure
options. Requiring disclosures only on the Internet would not provide
information to consumers in the store, where most consumers likely
compare performance. Labels on packages, another possible option, would
only provide information to consumers where retailers display boxes on
the showroom floor.
---------------------------------------------------------------------------
\29\ ``Spending on Consumer Technology Products Increased in
2006 but at a Slower Rate, According to The NPD Group,'' Feb. 22,
2007 (http://www.npd.com/press/releases/press_070222.html).
---------------------------------------------------------------------------
Although CEA's comments urged the Commission to conduct research on
various disclosure methods, the Commission does not believe such
research is needed. CEA has offered no evidence that contradicts the
commenter observations with regard to product labeling. In the absence
of any evidence suggesting that product labeling will not assist
consumers in their purchasing decisions, consumer research is
unnecessary in this circumstance.
The Commission now seeks comment on the proposed labeling
requirement, including evidence disputing or supporting these
conclusions. Because some stores place television boxes in the
showroom, the Commission also seeks comment on whether the label should
be required on the television box, in addition to the product itself.
2. Format
Label format is a particularly important factor for televisions.
Unlike many large appliances, televisions have no interior in which to
affix a label and much of the product's exterior consists of a viewable
screen that consumers want to see while shopping. CERC emphasized that
any labeling requirement that obscures the viewable screen diminishes
the consumer's ability to evaluate televisions based on performance.
Similarly, CERC argued that the label should not interfere with the
product's performance, display, or safety.
Other commenters offered specific suggestions about label size and
placement. CEE urged that the label be displayed consistently in the
same location. Mitsubishi offered three alternatives types of labels:
1) an adhesive label, 2) a hang tag, and 3) a cling label. It also
suggested that the Commission configure the label into a triangle shape
so that it could fit into the corner of screens, perhaps through a
cling label.
After considering the comments, the Commission proposes two options
for television EnergyGuide labels: a small rectangular adhesive label
affixed either vertically or horizontally on the product's bezel (i.e.,
the border or frame surrounding the television) or a triangular cling
label affixed to the bottom right hand corner of the screen.\30\ Thus,
the proposed requirements give manufacturers flexibility to account for
the configurations of their televisions. Both proposed labels are
significantly smaller than the appliance EnergyGuide labels. Examples
appear in Figure 1. The small size should minimize any affect the
labels have on the aesthetic presentation of televisions in the
showroom and should not impair the ability of consumers to compare the
performance of competing products. In addition, the proposed labels
appear to be consistent with some current industry practices.
Specifically, some manufacturers already provide descriptive
information (e.g., screen resolution, sound features, and high
definition capability) about their televisions through similar adhesive
labels on the television bezel or screen.
---------------------------------------------------------------------------
\30\ The Proposed Rule does not contain a hang tag option
because such labels on the exterior of products could become easily
dislodged.
---------------------------------------------------------------------------
[[Page 11487]]
[GRAPHIC] [TIFF OMITTED] TP11MR10.000
Figure 1
Proposed Television Label
(horizontal version)
The Commission seeks comment on this proposal including whether the
proposed labels are appropriate and whether it should consider other
point-of-purchase alternatives. In particular, the Commission requests
that commenters address whether the rectangular label must appear in a
consistent location on the bezel or whether manufacturers should have
the flexibility to choose the location. The Commission also seeks
comment on whether some television models are too small for the
proposed label and, if so, what requirements should apply to such
models.
3. Content
In its ANPR, the Commission sought comment on the content of
television energy disclosures. The commenters generally provided views
on two types of disclosures: product specific disclosures and
comparative information. As discussed in more detail below, the
Commission proposes requiring product specific information consistent
with EnergyGuide labels for other products, including annual energy
costs based on a uniform electricity rate of eleven cents per kWh and a
usage rate of five hours per day. The Commission also proposes
requiring comparative information in the form of a small scale on the
label similar to that required on EnergyGuide labels for appliances.
Product Specific Information: Commenters identified annual
operating (i.e., energy) cost and energy use as key descriptors in
television energy disclosures.\31\ In addition, CEA recommended that
the disclosure include information about the variability of energy cost
in actual use and the electricity rate underlying the cost estimate,
similar to information on the EnergyGuide label. Commenters also
suggested requiring disclosure of manufacturer name, model number,
television type (e.g., plasma, etc.), screen size (measured
diagonally), screen resolution, product features that may affect energy
use (e.g., integral DVD players or set-top boxes), and the ENERGY STAR
logo.\32\
---------------------------------------------------------------------------
\31\ See CEE, CEA, NRDC, and Sweeney comments.
\32\ See, e.g., NRDC, Sweeney, and CEE comments.
---------------------------------------------------------------------------
After considering the comments, the Commission proposes disclosure
requirements consistent with EnergyGuide labels for other products.
Such labels would disclose a television's annual energy cost and energy
use. As the Commission has stated before, a ``cost disclosure provides
a clear, understandable tool to allow consumers to compare the energy
performance of different models.''\33\ Energy cost information also
allows consumers to assess trade-offs between energy efficiency and
other expenditures.
---------------------------------------------------------------------------
\33\ 72 FR at 49959.
---------------------------------------------------------------------------
One commenter, NRDC, suggested that the FTC also consider
disclosing lifetime energy cost on the label to help consumers compare
the product's total cost over time. CEE disagreed, stating
[[Page 11488]]
that lifetime information may confuse consumers because such costs do
not appear on the EnergyGuide label for other products. The Commission
considered a multi-year cost disclosure in its recent proceeding on the
EnergyGuide label for appliances.\34\ The comments at that time raised
concerns that such a disclosure may imply a product's lifetime to
consumers and, therefore, introduce confusing assumptions. The
Commission believes such concerns remain valid and, therefore, does not
propose a multi-year operating cost disclosure for televisions.
---------------------------------------------------------------------------
\34\ 72 FR at 49952-3.
---------------------------------------------------------------------------
In addition to energy cost, the proposed television label would,
like EnergyGuide labels for other products, include manufacturer name,
model number, and the ENERGY STAR logo (where applicable). This
information allows consumers to confirm the identity of the labeled
product without crowding the label with information irrelevant to the
product's energy use. However, the Proposed Rule does not require
information such as screen size, television type, multiple functions
(e.g., integral DVD player), and screen resolution. Manufacturers and
retailers routinely provide this information through marketing and
point-of-sale materials, and, therefore, cluttering the label with this
information would not substantially benefit consumers. The Commission
seeks comment, however, on whether televisions with additional
functions, such as integrated DVD players, are common in the market. If
so, the Commission requests comment on whether the label should inform
consumers that the annual energy cost does not include the operation of
such additional functions. Would such a disclosure likely be helpful or
confusing to consumers? Given the size of the label, how should the
disclosure be presented?
To calculate annual energy use and energy cost information from
test results, manufacturers must have a standard usage rate (e.g., a
certain number of viewing hours per day) and a standard electricity
cost. The Proposed Rule would require annual cost information using 11
cents per kWh, which is based on 2009 DOE data rounded to the nearest
cent.\35\
---------------------------------------------------------------------------
\35\ 74 FR 26675 (June 3, 2009).
---------------------------------------------------------------------------
The commenters had different opinions regarding appropriate usage
rates. Several suggested that the FTC require a usage rate of 5 hours
per day in on-mode and 19 hours per day in standby (i.e., sleep)
mode.\36\ The ENERGY STAR program uses these same numbers to provide
annual energy use estimates.\37\ Other commenters, however, noted
recent consumer research suggesting higher actual usage patterns. For
example, Mitsubishi stated that recent data suggests the primary
television in U.S. households is active 7.1 hours a day. To take into
account likely increases in the future, it recommended that the FTC
require a usage pattern of eight hours per day. According to NRDC,
Nielson data suggested a range between five and eight hours per day.
NRDC, however, urged that the FTC and ENERGY STAR use the same
assumptions for calculating annual model energy use.
---------------------------------------------------------------------------
\36\ See, e.g., CEE and CEA comments.
\37\ 74 FR at 11048.
---------------------------------------------------------------------------
After considering the comments, the Commission proposes five hours
a day in on-mode and 19 hours per day in standby mode to calculate
annual cost and energy consumption information. This range is
consistent with the ENERGY STAR program and within the range of usage
data provided by commenters. Furthermore, regardless of the actual
average usage rate, the proposed usage pattern of five hours will
establish a consistent number that will allow consumers to compare
products.
Comparative Information: Comparative information, which the
Commission requires on EnergyGuide labels for most appliances, allows
consumers to gauge the energy use of a particular product against
similar models by displaying the range of energy costs or use of all
competing models. The EPCA amendments provide the Commission with
discretion to require comparative information in labeling or
disclosures.\38\
---------------------------------------------------------------------------
\38\ 42 U.S.C. 6924(c)(9).
---------------------------------------------------------------------------
Given this discretion, the Commission sought comment on whether
television energy disclosures should provide comparative information
and, if so, how such information should be organized. Commenters
provided three different views. First, several urged the Commission to
include comparative information, although they disagreed about the
basis of the comparison. For example, Mitsubishi suggested disclosing
comparative information based on screen size only.\39\ Sweeney favored
comparative disclosures, but suggested sorting information by
technology (such as LCD, plasma, rear-projection) or by the existence
of extra accessories bundled with the model (e.g., HDTV with built-in
Blu-ray player). Second, CEE proposed gathering information about
consumer purchasing behavior before determining whether to require
comparative information across all models or categorized by size.
---------------------------------------------------------------------------
\39\ Mitsubishi explained that ``Consumers don't shop for a LCD
television, for example: they shop for a 60'' television and
evaluate their options.'' It urged the Commission to limit
comparison information to screen size for <20'' diagonal
televisions, then by 10'' (diagonal) increments thereafter (e.g.,
20-29, 30-39, 40-49, 50-59, 60-69, 70-79, 80-89, 90-99.).
---------------------------------------------------------------------------
Finally, CEA opposed any comparative data on the label.
Specifically, it argued that: (1) the many variables relevant to energy
use could add unnecessary complexity to the disclosure, (2) frequent
changes in models on the market would make it difficult to establish
and maintain reasonable points of comparison, and (3) other sources,
including consumer and trade publications and product reviews, will
make the required energy disclosures available for consumers.
After reviewing the comments, the Commission proposes to require
comparative information on the label grouped by screen size. The
endpoints of each range would represent the highest and lowest energy
consumption of models on the market. This information should help
consumers by illustrating how a particular model compares to similar
products on the market. The Commission does not propose to group
comparative ranges by technology or screen resolution because this
would create separate comparative categories for similar products and
thus segregate products that consumers may want to compare (e.g.,
plasma screens vs. LCD). The Commission proposes ranges of
comparability in section 305.17 of the Rule based on current ENERGY
STAR data. This data appears to cover most of the products existing on
the market and should provide ranges that reasonably reflect models
available on the market.\40\ The Commission seeks comment on these
ranges and whether the Commission should look to other data sources in
publishing ranges in the final rule.\41\
---------------------------------------------------------------------------
\40\ See, e.g., ``Stricter Energy Star Standards for TVs Coming
- Again,'' Electronic House, May 28, 2009 (http://www.electronichouse.com/article//stricter_energy_star_standards_for_tvs_coming_again/) (``Most TVs on the market can meet the
[current ENERGY STAR] spec.''). The ENERGY STAR program has recently
issued much more stringent criteria which will go into effect May 1,
2010. See ENERGY STAR Program Requirements for Televisions Partner
Commitments Versions 4.0 and 5.0 (http://www.energystar.gov/ia/partners/prod_development/revisions/downloads/television/Final_Version%204_5_TV_Program_Requirements.pdf). If a model's energy
cost falls outside the high or low end of the comparability range,
the Commission proposes to require that manufacturers place the
product on the very end of the scale (the high or low end as
appropriate). 16 CFR Sec. 305.17(f)(6).
\41\ Because the EPCA annual reporting requirements depend on
the existence of a DOE test procedure and no such procedure exists
for televisions, the Proposed Rule does not contain such reporting
requirements. 42 U.S.C. 6296(b)(4). When DOE completes its test
procedure for televisions, the Commission will revisit this issue.
---------------------------------------------------------------------------
[[Page 11489]]
Finally, the Commission does not find CEA's arguments against
including comparative information on the label compelling. First, the
proposed comparative information is fairly simple (consisting of two
cost numbers on a scale) and there are no variables involved that would
make it unnecessarily complex as suggested by CEA. Second, although
frequent market changes may affect the ranges, the FTC can amend the
ranges if substantial changes occur just as it does for appliance
labels. If substantial changes occur so frequently that the benefit of
the comparative information becomes questionable, the Commission can
consider eliminating such information altogether from the television
label. Finally, publications and product reviews cannot replace the
benefits of providing uniform comparative information to consumers in
the store at the point of purchase.
Other Information: As an alternative to the EnergyGuide format,
NRDC suggested a five-star efficiency rating system, arguing that a
categorical, stars-based approach would yield superior results to
information provided in the EnergyGuide label. In 2007, the Commission
considered five-star rating systems during the EnergyGuide label
proceeding and, more recently, in developing changes to light bulb
labels. In both cases, the Commission determined not to propose such a
system, in part, because of potential confusion with the ENERGY STAR
program.\42\ Given the recent examination of this issue, the Commission
does not propose such a rating system for televisions.
---------------------------------------------------------------------------
\42\ 72 FR at 6844-46 (EnergyGuide label); and 74 FR 57950 (Nov.
10, 2009) (light bulb labeling). Both studies suggested that the
five-star rating system was more likely to cause confusion with
regard to ENERGY STAR than other methods of communicating energy
use.
---------------------------------------------------------------------------
4. Catalog Disclosures
As directed by EPCA, section 305.20 of the current Appliance
Labeling Rule requires any manufacturer, distributor, retailer, or
private labeler who advertises in a catalog (i.e., those publications,
including websites, from which a consumer can order merchandise), to
disclose energy information about the product to consumers.\43\ This
requirement helps ensure that consumers buying products online receive
the same energy information as those in brick-and-mortar stores.
Moreover, in response to the ANPR, several commenters suggested that
the FTC require energy disclosures for web-based television
sellers.\44\ In particular, some commenters suggested requiring the
energy disclosure or an electronic version of the label on
websites.\45\
---------------------------------------------------------------------------
\43\ EPCA indicates that catalogs must ``contain all information
required to be displayed on the label, except as otherwise provided
by the rule of the Commission.'' 42 U.S.C. 6296(a).
\44\ See, e.g., NRDC, CEE, Mitsubishi, and Sweeney comments.
\45\ See NRDC and Mitsubishi comments.
---------------------------------------------------------------------------
In light of the current Rule and the comments, the Commission
proposes requiring Internet and paper catalog sellers to post energy
cost information. The Commission has identified no reason to treat
online and paper catalog televisions sales differently than other
covered products. Sellers commonly offer televisions through retail
websites. As with product labels in the store, energy information
offered online should help consumers compare the energy use of
competing products. Consistent with current requirements for
appliances, the Proposed Rule provides the option of posting an image
of the EnergyGuide label itself or providing separate energy
information derived from the product's EnergyGuide label.
D. Timing of Proposed Requirements
The EPCA amendments state that any FTC labeling or disclosure
requirements for consumer electronics shall be effective ``not later
than'' 18 months after promulgation.\46\ The Commission believes that
six months will be adequate to allow for testing and labeling of
products. Products manufactured thereafter would require a label. The
Commission seeks comment on the proposed six month period.\47\
Suggestions for longer time periods should be accompanied by specific
information justifying the need for additional time.\48\
---------------------------------------------------------------------------
\46\ 42 U.S.C. 6294(a)(2)(I)(iii).
\47\ The six month period is consistent with EPCA's mandate that
manufacturers test and re-label their products at least 180 days
after DOE changes an applicable test procedure. 42 U.S.C. 6293(c).
\48\ The Commission notes that on November 18, 2009, the
California Energy Commission approved final regulations for
televisions that included energy efficiency standards and energy
disclosures. Beginning in 2011, the regulations require
manufacturers to mark units permanently with the ``on'' mode power
consumption in watts and to disclose a model's watts wherever the
product's dimensions appear in any ``publication, website, document,
or retail display that is used for sale or offering for sale of a
television.''
---------------------------------------------------------------------------
VII. Other Consumer Electronics
The Commission also sought comments about labeling requirements for
cable or satellite set-top boxes, stand-alone digital video recorder
boxes, personal computers, personal computer monitors, and other
consumer electronics. Some commenters urged the Commission to consider
developing labels for these products. For example, CEE and NRDC stated
that the products use significant amounts of energy, there is a
significant range of energy use among models, and consumers would
likely benefit from energy disclosures for electronics. CEE and NRDC
specifically recommended that the Commission also consider labeling
game consoles, multi-function devices, and audio/visual equipment. To
measure the energy consumption of electronics, CEE and NRDC recommended
that the Commission consider ENERGY STAR program test procedures.
Additionally, CEA suggested that, before moving forward, the Commission
carefully consider each product separately.\49\ The Commission agrees
and, therefore, discusses each product below.
---------------------------------------------------------------------------
\49\ As they did with televisions, CEA argued that the
Commission should identify evidence that disclosures would impact
the purchasing decisions of a substantial majority of consumers. As
discussed above, the statute contains no such test.
---------------------------------------------------------------------------
Cable and Satellite Set-top Boxes: According to a 2007 study from
CEA, these devices use approximately 130 kWh per year.\50\ Moreover,
ENERGY STAR data suggests that there is a range of energy use among
qualified models.\51\ In addition, there appears to be an appropriate
method to determine energy consumption for these products,
specifically, the ENERGY STAR program test procedure.\52\
---------------------------------------------------------------------------
\50\ ``Energy Consumption by Consumer Electronics in U.S.
Residences,'' CEA (2007) at 26 (http://www.ce.org/pdf/Energy%20Consumption%20by%20CE%20in%20U.S.%20Residences%20%28January%202007%29.pdf) (CEA Study).
\51\ See (http://www.energystar.gov/ia/products/prod_lists/set_top_boxes_prod_list.pdf).
\52\ See (http://www.energystar.gov/ia/partners/product_specs/program_reqs/set_top_boxes_prog_req.pdf).
---------------------------------------------------------------------------
Despite the energy use of these products, the variation in energy
use among models, and the existence of a test procedure, Motorola
argued that energy disclosures for set-top boxes would provide little
benefit to consumers. Specifically, Motorola stated that consumers
generally do not purchase set-top boxes at retail.\53\ Instead,
consumers usually lease these products from their service provider
(e.g., cable operator), and do not have the opportunity to comparison
shop for different models. CEA additionally stated that service
providers often install software in these devices that can change the
product's energy consumption, which could complicate
[[Page 11490]]
efforts to provide consumers with accurate information.
---------------------------------------------------------------------------
\53\ Motorola comments; see also CEA comments.
---------------------------------------------------------------------------
Given the issues raised by Motorola and CEA, the Commission does
not propose requiring energy labeling or disclosures for set-top boxes
at this time. The Commission, however, seeks further comment on this
issue. Although consumers do not purchase set-top boxes at retail, they
may comparison shop for different cable or satellite service providers.
If these providers were to disclose the energy use of the boxes they
lease as part of their service, consumers could theoretically use this
information in deciding which service provider to choose. The
Commission, therefore, requests comment on whether such disclosures
would, in fact, be likely to assist consumers in their purchasing
decisions. If so, the Commission also seeks comment on how energy use
information should be disclosed to consumers (e.g., on service
providers' websites). Disclosures for these products are challenging
because consumers are unlikely to see labels on set-top boxes and the
record contains no information about how consumers shop for cable or
satellite service providers (e.g., online, by telephone, etc.). The
Commission also seeks comment on whether the range of energy use among
models is significant, whether disclosure of comparability ranges would
be useful to consumers, whether there should be one range for all set-
top boxes, and whether there is comprehensive industry data on which to
base such ranges. Finally, the Commission seeks comment on whether the
ENERGY STAR test procedure for set-top boxes is an appropriate method
of calculating energy consumption. Would this procedure yield an
accurate estimate of annual energy consumption if third parties later
install software in the boxes?
Stand-alone Digital Video Recorder (DVR) Boxes: According to CEA's
2007 study, these products use approximately 237 kWh per year.\54\ CEA
states, however, that there currently is no test procedure to measure
energy consumption for these products.\55\ CEA noted that it was
working on test procedures through the industry standards development
process.
---------------------------------------------------------------------------
\54\ CEA Report at 26.
\55\ See CEA comments.
---------------------------------------------------------------------------
Given the apparent lack of an appropriate test procedure, the
Commission does not propose labeling at this time. The Commission,
however, requests further comment on whether an industry test procedure
has been completed or whether other procedures, such as the ENERGY STAR
set-top box procedure, are appropriate for measuring the energy use of
all stand-alone DVRs. The Commission also seeks comment on whether
there are estimates of typical consumer use of these products, which
could be used to calculate annual energy consumption. In addition, the
Commission seeks comment on whether there are significant differences
in energy consumption between competing DVR models. This information
could affect whether disclosures are likely to be useful to consumers
and whether disclosure of comparability ranges would be appropriate. If
the Commission were to require disclosure of comparability ranges,
should there be one range for all DVR models? Is there comprehensive
industry data on which to base such ranges? Finally, to evaluate how
energy disclosures might be presented, the Commission requests comment
on how consumers typically shop for these products. For example, if
DVRs are displayed in retail stores out of the box, energy information
could be provided on either a label or hangtag attached to the product.
If DVRs are not displayed in that way, energy information might be
provided on a label attached to the box.
Personal Computers: According to CEA's 2007 study, desktop
computers use approximately 237 kWh per year and notebook computers use
approximately 72 kWh per year.\56\ Moreover, ENERGY STAR data suggests
that there is a range in energy use among qualified models.\57\
However, the ENERGY STAR program test procedure only derives estimates
of annual energy consumption in off, sleep, and idle modes.\58\
---------------------------------------------------------------------------
\56\ Id.
\57\ See (http://downloads.energystar.gov/bi/qplist/computers_prod_list.pdf).
\58\ See (http://www.energystar.gov/ia/partners/prod_development/revisions/downloads/computer/Version5.0_Computer_Spec.pdf).
---------------------------------------------------------------------------
Moreover, CEA raised concerns about requiring energy use
disclosures for all computers. CEA explained that consumers often
purchase computers by selecting among different components, including
processors, memory, and drives. Such choices may affect the energy use
of the finished product. Therefore, CEA stated that it would be
administratively complex to provide energy disclosures for these
various combinations, and the FTC should consider requiring disclosures
for only ``basic'' or ``typical'' computers.\59\
---------------------------------------------------------------------------
\59\ See CEA comments.
---------------------------------------------------------------------------
Given the potential limitations of the ENERGY STAR test procedure
as well as the concerns raised by CEA, the Commission does not propose
labeling at this time, but instead seeks further comment. Specifically,
the Commission seeks comment on whether energy use information should
be derived using the current ENERGY STAR test procedure (and, if so,
whether a disclosure based on energy use only in off, sleep, and idle
modes would be helpful or confusing to consumers), or whether there are
other appropriate test procedures for measuring energy use.
Additionally, the Commission requests comment on whether it should
require disclosures for multiple computer configurations and, if so,
how such disclosures should be made given the potentially large number
of configurations. If the Commission should require disclosures only
for certain ``basic'' models, which ones should be covered and why?
Would these disclosures provide misleading energy use information if
consumers typically modify the ``basic'' computer configuration?
Moreover, the Commission seeks comment on whether the range of energy
use among models is significant, whether disclosure of comparability
ranges would be useful to consumers, whether there should be one range
for all computers or separate ranges for desktops and notebooks, and
whether there is comprehensive industry data on which to base such
ranges. Finally, the Commission requests comment on how consumers shop
for computers and how disclosures should be presented (e.g., a label on
a display model, a label on the box, online, etc.).
Personal Computer Monitors: According to CEA's 2007 study, computer
monitors typically use 85 kWh per year.\60\ Additionally, ENERGY STAR
data suggests that there is a range of energy use among qualified
products.\61\ Moreover, the ENERGY STAR program has a procedure to
measure energy consumption, but it currently tests monitors using a
static (i.e., fixed screen) image.\62\
---------------------------------------------------------------------------
\60\ CEA Study at 26.
\61\ See (http://www.energystar.gov/ia/partners/product_specs/qpi/displays_prod_list.pdf).
\62\ See (http://www.energystar.gov/ia/partners/product_specs/program_reqs/displays_spec.pdf).
---------------------------------------------------------------------------
Because a static image test may not provide energy use figures that
reflect typical consumer use of computer monitors and because the
ENERGY STAR procedure does not specify a method for calculating annual
energy consumption, the Commission does not propose labeling monitors
at this time. The Commission, however, requests further comment on this
issue. Specifically, the Commission seeks comment on whether it should
require disclosures based on the current
[[Page 11491]]
ENERGY STAR test procedure that measures consumption based on a fixed
screen image, whether the IEC test for televisions is appropriate for
measuring energy consumption of computer monitors, or whether other,
appropriate industry test procedures exist. The Commission also
requests information about what use estimates it should rely upon to
calculate the annual energy consumption of computer monitors.
Additionally, the Commission seeks comment on whether the range of
energy use among models is significant, whether to require disclosure
of comparability ranges, whether there should be one range for all
models, and whether there is comprehensive industry data on which to
base such ranges. Finally, the Commission requests comment on how
consumers shop for computer monitors and how energy use disclosures
should be presented to consumers (e.g., a label on a display model, a
label on the box, online, etc.).
Game Consoles: Although the CEA's 2007 study indicates that game
consoles use approximately 36 kWh per year, NRDC's more recent analysis
indicates that they can use as much as 1000 kWh per year.\63\ NRDC's
study also found a wide variation of energy use among brands. The
NRDC's study recommended collaborative efforts to develop a standard
test procedure for these products.\64\ Although the ENERGY STAR program
currently contains a test procedure for game consoles in off and sleep
modes, the program is in the process of considering additional
criteria.\65\
---------------------------------------------------------------------------
\63\ CEA Study at 26; ``Lowering the Cost of Play: Improving the
Energy Efficiency of Video Game Consoles,'' NRDC (Nov. 2008) (http://www.nrdc.org/energy/consoles/files/consoles.pdf) (NRDC Study).
\64\ NRDC Study at 25.
\65\ See (http://www.energystar.gov/ia/partners/prod_development/revisions/downloads/computer/Version5.0_Computer_Spec.pdf).
---------------------------------------------------------------------------
Because there does not appear to be an industry test procedure and
the ENERGY STAR program currently is reviewing its procedure, the
Commission does not propose energy disclosures at this time. The
Commission requests comment, however, on whether it should require such
disclosures based on the existing ENERGY STAR test procedure (and, if
so, whether a disclosure based on off and sleep modes would be helpful
or confusing for consumers), whether it should wait for any revised
ENERGY STAR test procedures, or whether other, appropriate test
procedures exist. The Commission also seeks information about use
estimates for calculating the annual energy consumption of game
consoles. Additionally, the Commission requests comment on whether it
should require disclosure of comparability ranges, whether there should
be one range for all models, and whether there is comprehensive
industry data on which to base such ranges. Finally, the Commission
requests comment on how consumers shop for game consoles and how energy
use disclosures should be presented to consumers (e.g., a label on a
display model, a label on the box, online, etc.).
Multi-function Devices (MFDs):\66\ Although there is no information
on the record concerning MFDs' typical energy use, ENERGY STAR data
suggests a range of energy consumption among models.\67\ The ENERGY
STAR program test procedures for MFDs apply to personal, business, and
commercial products.\68\ These procedures yield weekly energy
consumption figures and they appear to reflect certain assumptions of
how many hours the product is used in a business setting (e.g.,
assuming no usage on weekends).
---------------------------------------------------------------------------
\66\ The ENERGY STAR program defines an MFD as a product that
performs two or more of the core functions of copying, printing,
scanning, or faxing. See (http://www.energystar.gov/ia/ partners/
product_specs/program_reqs/
Imaging%20Equipment%20Specifications.pdf.)
\67\ See (http://downloads.energystar.gov/bi/qplist/image_equip_prod_list.pdf).
\68\ See (http://www.energystar.gov/ia/partners/product_specs/program_reqs/Imaging%20Equipment%20Specifications.pdf).
---------------------------------------------------------------------------
Based on these facts, it appears that some MFDs may not used by
individual consumers. If that is the case, the Commission may not have
authority to require energy disclosures for those MFDs. Specifically,
the Commission only has the authority to require energy disclosures for
``consumer products,'' which EPCA defines as any article that consumes
energy and ``to any significant extent, is distributed in commerce for
personal use or consumption by individuals.''\69\ The Commission cannot
propose labeling for MFDs until it gathers more information about the
extent to which these products are sold for personal use.
---------------------------------------------------------------------------
\69\ 42 U.S.C. 6291(1).
---------------------------------------------------------------------------
The Commission, therefore, seeks comment on whether some MFDs are
typically purchased for personal use. The Commission also requests
comment on whether the ENERGY STAR test procedure is appropriate to
calculate energy consumption for individuals' use of MFDs, whether
there are other, appropriate test procedures, and whether there are
estimates of individual MFD use for calculating annual energy
consumption. Moreover, the Commission requests comment on whether the
range of energy use among models is significant, whether it should
require disclosure of comparability ranges, whether there should be one
range for all models, and whether there is comprehensive industry data
on which to base such ranges. Finally, the Commission requests comment
on how consumers shop for MFDs and how energy disclosures should be
presented (e.g., a label on a display model, a label on a box, etc.).
Audio-visual (A/V) Equipment: The ENERGY STAR program defines
consumer A/V products to include ``cassette decks, CD players/changers,
CD recorders/burners, clock radios, DVD & Blu-ray Disc products,
equalizers, laserdisc players, mini- and midi-systems, minidisc
players, powered speakers, rack systems, stereo amplifiers/pre-
amplifiers, stereo receivers, table radios, and tuners.''\70\ The
program has test procedures for these A/V products, but they do not
specify a method of calculating their annual energy consumption. The
CEA's 2007 study provides approximate energy use information for some
types of these A/V products,\71\ but the Commission does not have
information about the range of annual energy consumption of each
specific product.
---------------------------------------------------------------------------
\70\ See (http://www.energystar.gov/ia/partners/product_specs/program_reqs/AV_V2_Specification.pdf).
\71\ For example, DVD players and DVD/VCR combos use 36 kWh per
year, while a home theater in a box uses 89 kWh per year. CEA Study
at 26.
---------------------------------------------------------------------------
Because the Commission lacks information on calculating annual
energy use and about the ranges of annual energy use, it does not
propose labeling A/V equipment at this time. The Commission, however,
requests further comment about each specific type of A/V equipment.
Specifically, for each particular type of A/V equipment, are there
significant variations in energy use among models and is labeling
likely to benefit consumers in their purchasing decisions? The
Commission also seeks comment on whether the ENERGY STAR test
procedures are appropriate for measuring energy use or whether there
are other, appropriate test procedures. Additionally, the Commission
seeks information on use estimates for calculating each product's
annual energy consumption. Moreover, the Commission requests comment on
whether it should require disclosure of comparability ranges, whether
there should be a separate range for each type of A/V product or
whether ranges should combine certain types, and whether there is
comprehensive industry data on which to base such ranges. Finally, the
Commission seeks comment on how consumers typically
[[Page 11492]]
shop for each product and how energy disclosures for each product
should be presented.
VIII. Section by Section Description of Proposed Changes
Definition of Television (section 305.3): The proposed amendments
add a definition of televisions that is consistent with the definition
used by the ENERGY STAR program.\72\
---------------------------------------------------------------------------
\72\ The Proposed Rule excludes a sentence in the ENERGY STAR
definition that reads: ``The product usually relies upon a cathode-
ray tube (CRT), liquid crystal display (LCD), plasma display, or
other display device.'' Such a list of examples is not necessary in
a regulatory definition.
---------------------------------------------------------------------------
Testing Requirements (section 305.5): The proposed amendments
require manufacturers to follow the test procedures required by the
ENERGY STAR program.
Minor Conforming Changes (305.8 and 305.8): The Proposed Rule makes
minor, conforming changes to sections 305.8 (data submission) and
305.10 (ranges of comparability) to clarify that these sections do not
apply to televisions.
Product Labeling (section 305.17)): The proposed amendments require
manufacturers to affix EnergyGuide labels to televisions on either the
product's bezel or its screen in the form of a small rectangular or
triangular label. The primary disclosure on the label would be the
product's estimated annual energy cost.
Catalog Requirements (section 305.20): The proposed amendments
require catalog sellers (including web-based catalogs) to provide, for
each television, the same information required on the EnergyGuide
label.
IX. Request for Comment and Public Meeting Information
The Commission invites interested persons to submit written
comments on any issue of fact, law, or policy that may bear upon the
FTC's proposed labeling requirements. Please provide explanations for
your answers and supporting evidence where appropriate. After examining
the comments, the Commission will determine whether to issue final
amendments.
All comments should be filed as prescribed in the ``ADDRESSES''
section above, and must be received on or before May 14, 2010. In
addition to the questions and requests for comment found throughout
this Notice, the Commission also asks that commenters address the
following questions: What costs or burdens, and any other impacts,
would the proposed requirements impose, and on whom? What regulatory
alternatives to the proposed requirements are available that would
reduce the burdens of the proposed requirements? How would such
alternatives affect the benefits provided by the Proposed Rule?
Interested parties are invited to submit written comments
electronically or in paper form. Comments should refer to ``Consumer
Electronics Labeling, Project No. P094201'' to facilitate the
organization of comments. Please note that your comment - including
your name and your state - will be placed on the public record of this
proceeding, including on the publicly accessible FTC website, at
(http://www.ftc.gov/os/publiccomments.shtm).
Because comments will be made public, they should not include any
sensitive personal information, such as any individual's Social
Security Number; date of birth; driver's license number or other state
identification number, or foreign country equivalent; passport number;
financial account number; or credit or debit card number. Comments also
should not include any sensitive health information, such as medical
records or other individually identifiable health information. In
addition, comments should not include ``[t]rade secret or any
commercial or financial information which is obtained from any person
and which is privileged or confidential'' as provided in Section 6(f)
of the Federal Trade Commission Act (``FTC Act''), 15 U.S.C. 46(f), and
FTC Rule 4.10(a)(2), 16 CFR 4.10(a)(2). Comments containing matter for
which confidential treatment is requested must be filed in paper form,
must be clearly labeled ``Confidential,'' and must comply with FTC Rule
4.9(c).\73\
---------------------------------------------------------------------------
\73\ The comment must be accompanied by an explicit request for
confidential treatment, including the factual and legal basis for
the request, and must identify the specific portions of the comment
to be withheld from the public record. The request will be granted
or denied by the Commission's General Counsel, consistent with
applicable law and the public interest. See FTC Rule 4.9(c), 16 CFR
Sec. 4.9.(c).
---------------------------------------------------------------------------
Because paper mail addressed to the FTC is subject to delay due to
heightened security screening, please consider submitting your comments
in electronic form. Comments filed in electronic form should be
submitted using the following weblink: (https://public.commentworks.com/ftc/tvdisclosures) (and following the
instructions on the web-based form). To ensure that the Commission
considers an electronic comment, you must file it on the web-based form
at the weblink (https://public.commentworks.com/ftc/tvdisclosures). If
this Notice appears at (http://www.regulations.gov/search/Regs/home.html#home), you may also file an electronic comment through that
website. The Commission will consider all comments that regulations.gov
forwards to it. You may also visit the FTC Website at (http://www.ftc.gov) to read the Notice and the news release describing it.
A comment filed in paper form should include the ``Consumer
Electronics Labeling, Project No. P094201'' reference both in the text
and on the envelope, and should be mailed or delivered to the following
address: Federal Trade Commission, Office of the Secretary, Room H-135
(Annex T), 600 Pennsylvania Avenue, N.W., Washington, DC 20580. The FTC
is requesting that any comment filed in paper form be sent by courier
or overnight service, if possible, because U.S. postal mail in the
Washington area and at the Commission is subject to delay due to
heightened security precautions.
The FTC Act and other laws that the Commission administers permit
the collection of public comments to consider and use in this
proceeding as appropriate. The Commission will consider all timely and
responsive public comments that it receives, whether filed in paper or
electronic form. Comments received will be available to the public on
the FTC website, to the extent practicable, at (http://www.ftc.gov/os/publiccomments.shtm). As a matter of discretion, the FTC makes every
effort to remove home contact information for individuals from the
public comments it receives before placing those comments on the FTC
website. More information, including routine uses permitted by the
Privacy Act, may be found in the FTC's privacy policy, at (http://www.ftc.gov/ftc/privacy.htm).
The Commission staff has scheduled a public meeting to give
interested parties an opportunity to provide their views on issues
related to the Proposed Rule for televisions and potential disclosure
requirements for other consumer electronics.\74\ The details of this
public meeting are as follows:
---------------------------------------------------------------------------
\74\ In comments, both the CERC and CEA urged the Commission to
hold a public meeting. See (http://www.ftc.gov/os/comments/tvenergylabels/index.shtm).
---------------------------------------------------------------------------
Meeting Time and Location: The public meeting will be held on April
16, 2010, from 9:00 a.m. to 1:00 p.m. at the FTC's Satellite Building
Conference Center, located at 601 New Jersey Avenue, NW, Washington,
DC.
Meeting Information: The public meeting will include participation
by selected panelists. Other attendees also will have an opportunity to
present
[[Page 11493]]
their views and ask questions. There is no fee for attendance. A
stenographer will record the proceedings, and the Commission will place
the transcription on the public record. For admittance to the
Conference Center, all attendees must show a valid photo identification
such as a driver's license. The FTC will accept pre-registration for
this meeting. Pre-registration is not necessary to attend, but is
encouraged. To pre-register, please email your name and affiliation to
([email protected]). When you pre-register, we will collect
your name, affiliation, and your email address. The Commission will use
this information to estimate how many people will attend. We may use
your email address to contact you with information about the workshop.
Under the Freedom of Information Act (FOIA) or other laws, we may
be required to disclose to outside organizations the information you
provide. For additional information, including routine uses permitted
by the Privacy Act, see the Commission's Privacy Policy at
(www.ftc.gov/ftc/privacy.shtm). The FTC Act and other laws the
Commission administers permit the collection of this contact
information to consider and use for the above purposes.
X. Paperwork Reduction Act
The current Rule contains recordkeeping, disclosure, testing, and
reporting requirements that constitute ``information collection
requirements'' as defined by 5 CFR Sec. 1320.7(c), the regulation that
implements the Paperwork Reduction Act (PRA).\75\ OMB has approved the
Rule's existing information collection requirements through May 31,
2011 (OMB Control No. 3084-0069). The proposed amendments would require
television manufacturers to test and label their products with energy
information and to maintain records for two years after a product model
is discontinued. It would also require paper and website catalog
sellers of televisions to provide energy information. Accordingly, the
Commission is submitting a related clearance request to OMB for review
under the PRA.
---------------------------------------------------------------------------
\75\ 44 U.S.C. 3501-3521.
---------------------------------------------------------------------------
The following burden estimates for the Proposed Rule amendments
(cumulatively, 57,450 hours for recordkeeping, testing, and disclosure
at an associated labor cost of $834,680) are based on data submitted by
manufacturers to the FTC under current requirements and FTC staff's
general knowledge of manufacturing practices.
Testing: Manufacturers need not subject each basic model to testing
annually; they must retest only if the product design changes in such a
way as to affect energy consumption. Staff believes that the frequency
with which models are tested every year ranges roughly between 10% and
50%. It is likely that only a small portion of the tests conducted is
attributable to the Rule's requirements. Nonetheless, given the lack of
specific data on this point, the Commission conservatively assumes that
all of the tests conducted would be attributable to the Rule's
requirements and will apply to that assumption the high-end of the
range noted above for frequency of testing. Staff estimates that there
are approximately 2,000 basic models, two units per model, and that
testing per unit would require one hour per unit tested. Given these
estimates and the above-noted assumption that 50% of these basic models
would be tested annually, testing would require 2,000 hours per year.
Assuming further that this testing will be implemented by electrical
engineers, and applying an associated hourly wage rate of $39.79 per
hour,\76\ labor costs for testing would total $79,580.
---------------------------------------------------------------------------
\76\ See (http://www.bls.gov/ncs/ncswage2008.htm#Wage_Tables)
(``National Compensation Survey: Occupational Earnings in the United
States, 2008'', U.S. Department of Labor, August 2009, Bulletin
2720, Table 3 (``Full-time civilian workers,'' mean and median
hourly wages), at 3-4).
---------------------------------------------------------------------------
Recordkeeping: Pursuant to section 305.21 of the Rule,
manufacturers must keep test data on file for a period of two years
after the production of a covered product model has been terminated.
Assuming one minute per model and 2,000 basic models, the recordkeeping
burden would total 33 hours. Assuming further that these filing
requirements will be implemented by data entry workers at an hourly
wage rate of $13.53 per hour,\77\ the associated labor cost for
recordkeeping would be approximately $450 per year.
---------------------------------------------------------------------------
\77\ See (http://www.bls.gov/ncs/ncswage2008.htm#Wage_Tables)
(``National Compensation Survey: Occupational Earnings in the United
States, 2008,'' U.S. Department of Labor, August 2009, Bulletin
2720, Table 3 (``Full-time civilian workers,'' mean and median
hourly wages), at 3-24).
---------------------------------------------------------------------------
Disclosures (Product Labeling): The Proposed Rule requires
manufacturers to create and affix labels on televisions. The Rule
specifies the content, format, and specifications of the required
labels. Manufacturers would only add the energy consumption figures
derived from testing and other product-specific information. Consistent
with past assumptions regarding appliances, FTC staff estimates that it
will take approximately six seconds per unit to affix labels. Staff
also estimates that there are 33,000,000 television units distributed
in the U.S. per year.\78\ Accordingly, the total disclosure burden for
televisions would be 55,000 hours (33,000,000 x 6 seconds). Assuming
that product labels will be affixed by electronic equipment assemblers
at an hourly wage of $13.61 per hour,\79\ cumulative associated labor
cost would total $748,550 per year.
---------------------------------------------------------------------------
\78\ See ``ENERGY STAR Unit Shipment and Market Penetration
Report Calendar Year 2008 Summary,'' (http://www.energystar.gov/ia/partners/downloads/2008_USD_Summary.pdf), at 5 (approximately 26
million television units shipped in 2008, constituting 79% market
penetration; 26,000,000 / .79 = 33,000,000).
\79\ See (http://www.bls.gov/ncs/ncswage2008.htm#Wage_Tables)
(National Compensation Survey: Occupational Earnings in the United
States 2008, U.S. Department of Labor (August 2009), Bulletin 2720,
Table 3 (``Full-time civilian workers,'' mean and median hourly
wages), at 3-30).
---------------------------------------------------------------------------
Catalog Disclosures: The Proposed Rule would require sellers
offering covered products through retail sales catalogs (i.e., those
publications from which a consumer can actually order merchandise) to
disclose energy use for each television model offered for sale. Because
this information is supplied by the product manufacturers, the burden
on the retailer consists of incorporating the information into the
catalog presentation.
Commission staff estimates that there are 50 online and paper
catalogs for televisions that would be subject to the Rule's catalog
disclosure requirements. Staff additionally estimates that the average
catalog contains approximately 500 televisions and that entry of the
required information takes one minute per covered product; thus, 9
hours per catalog seller. The cumulative disclosure burden for catalog
sellers is thus 450 hours (50 sellers x 9 hours annually). Assuming
that the additional disclosure requirement will be implemented by data
entry workers at an hourly wage rate of $13.53 per hour,\80\ associated
labor cost would approximate $6,100 per year.
---------------------------------------------------------------------------
\80\ See (http://www.bls.gov/ncs/ncswage2008.htm#Wage_Tables)
(``National Compensation Survey: Occupational Earnings in the United
States, 2008'', U.S. Department of Labor, August 2009, Bulletin
2720, Table 3 (``Full-time civilian workers,'' mean and median
hourly wages), at 3-24).
---------------------------------------------------------------------------
Estimated annual non-labor cost burden: Manufacturers are not
likely to require any significant capital costs to comply with the
Proposed Rule. Industry members, however, will incur the cost of
printing labels for each covered unit. The estimated label cost, based
on estimates of 33,000,000 units
[[Page 11494]]
and $.03 per label, is $990,000 (33,000,000 x $.03).
The Commission invites comments that will enable it to: (1)
evaluate whether the proposed collections of information are necessary
for the proper performance of the functions of the Commission,
including whether the information will have practical utility; (2)
evaluate the accuracy of the Commission's estimate of the burden of the
proposed collections of information, including the validity of the
methodology and assumptions used; (3) enhance the quality, utility, and
clarity of the information to be collected; and (4) minimize the burden
of the collections of information on those who must comply, including
through the use of appropriate automated, electronic, mechanical, or
other technological techniques or other forms of information
technology.
Comments on any proposed filing, recordkeeping, or disclosure
requirements that are subject to OMB review under the PRA should
additionally be submitted to: Office of Information and Regulatory
Affairs, Office of Management and Budget, Attention: Desk Officer for
Federal Trade Commission. Comments should be submitted via facsimile to
(202) 395-5167 because U.S. postal mail at the OMB is subject to
lengthy delays due to heightened security precautions.
XI. Regulatory Flexibility Act
The Regulatory Flexibility Act (RFA), 5 U.S.C. 601-612, requires
that the Commission provide an Initial Regulatory Flexibility Analysis
(IRFA) with a Proposed Rule and a Final Regulatory Flexibility Analysis
(FRFA), if any, with the final Rule, unless the Commission certifies
that the Rule will not have a significant economic impact on a
substantial number of small entities.\81\
---------------------------------------------------------------------------
\81\ 5 U.S.C. 603-605.
---------------------------------------------------------------------------
The Commission does not anticipate that the Proposed Rule will have
a significant economic impact on a substantial number of small
entities. The Commission recognizes that some affected entities may
qualify as small businesses under the relevant thresholds. The
Commission does not expect, however, that the economic impact of
implementing the label design will be significant. The Commission plans
to provide manufacturers with ample time to implement the requirements.
The Commission estimates that these new requirements will apply to
about 30 product manufacturers and an additional 50 online and paper
catalog sellers of covered products. Out of these companies, the
Commission expects that approximately 40 catalog sellers qualify as
small businesses. In addition, the Commission does not expect that the
requirements specified in the Proposed Rule will have a significant
impact on these entities.
Accordingly, this document serves as notice to the Small Business
Administration of the FTC's certification of no effect. To ensure the
accuracy of this certification, however, the Commission requests
comment on whether the Proposed Rule will have a significant impact on
a substantial number of small entities, including specific information
on the number of entities that would be covered by the Proposed Rule,
the number of these companies that are ``small entities,'' and the
average annual burden for each entity. Although the Commission
certifies under the RFA that the Rule proposed in this Notice would
not, if promulgated, have a significant impact on a substantial number
of small entities, the Commission has determined, nonetheless, that it
is appropriate to publish an IRFA in order to inquire into the impact
of the Proposed Rule on small entities. Therefore, the Commission has
prepared the following analysis:
A. Description of the Reasons That Action by the Agency Is Being Taken
Section 321(b) of the Energy Independence and Security Act of 2007
(Pub. L. 110-140) authorizes the Commission to conduct a rulemaking to
consider the effectiveness of the television labeling and to consider
alternative labeling approaches.
B. Statement of the Objectives of, and Legal Basis for, the Proposed
Rule
The objective of the Proposed Rule is to provide television energy
use information to consumers. EISA provides the Commission with
authority to require energy disclosures for televisions and other
consumer electronics.
C. Small Entities to Which the Proposed Rule Will Apply
Under the Small Business Size Standards issued by the Small
Business Administration, television manufacturers qualify as small
businesses if they have fewer than 1,000 employees (for other household
appliances the figure is 500 employees) or if their sales are less than
$8.0 million annually. The threshold for television retailers is $9.0
million. The Commission estimates that fewer than 40 entities (all
retailers) subject to the Proposed Rule qualify as small businesses.
The Commission seeks comment and information with regard to the
estimated number or nature of small business entities for which the
Proposed Rule would have a significant economic impact.
D. Projected Reporting, Recordkeeping, and Other Compliance
Requirements
The Commission recognizes that the proposed labeling rule will
involve some increased costs related to testing, drafting labels,
affixing labels to products, and maintaining test records. The Proposed
Rule does not impose any reporting requirements. All of these burdens
and the skills required to comply are discussed in the previous section
of this document, regarding the Paperwork Reduction Act, and there
should be no difference in that burden as applied to small businesses.
As explained earlier, the Commission estimates that there are only
about 40 catalog sellers under the Proposed Rule that would qualify as
such entities. The Commission invites comment and information on these
issues.
E. Duplicative, Overlapping, or Conflicting Federal Rules
The Commission has not identified any other federal statutes,
rules, or policies that would duplicate, overlap, or conflict with the
Proposed Rule. The Commission invites comment and information on this
issue.
F. Significant Alternatives to the Proposed Rule
The Commission seeks comment and information on the need, if any,
for alternative compliance methods that would reduce the economic
impact of the Rule on such small entities. As one alternative to reduce
burden, the Commission could delay the Rule's effective date to provide
additional time for small business compliance. The Commission could
also consider further reductions in the amount of information catalog
sellers must provide. Finally, the Commission has considered requiring
disclosures through the Internet instead of through product labels.
However, as discussed earlier, such an approach would not provide
information to consumers in the store, where most consumers compare
televisions performance. If the comments filed in response to this
Notice identify small entities that would be affected by the Rule, as
well as alternative methods of compliance that would reduce the
economic impact of the Rule on such entities, the Commission will
consider the feasibility of such alternatives and
[[Page 11495]]
determine whether they should be incorporated into the final rule.
XII. Communications by Outside Parties to the Commissioners or Their
Advisors
Written communications and summaries or transcripts of oral
communications respecting the merits of this proceeding, from any
outside party to any Commissioner or Commissioner's advisor, will be
placed on the public record. See 16 CFR 1.26(b)(5).
XIII. Proposed Rule Language
List of Subjects in 16 CFR Part 305
Advertising, Energy conservation, Household appliances, Labeling,
Reporting and recordkeeping requirements.
0
For the reasons set out above, the Commission proposes the following
amendments to 16 CFR Part 305:
PART 305--[AMENDED]
0
1. The authority citation for Part 305 continues to read as follows:
Authority: 42 U.S.C. 6294.
0
2. In Sec. 305.3., add new paragraph (u) to read as follows:
Sec. 305.3 Description of covered products.
(u) Television (TV) means a commercially available electronic
product designed primarily for the display and reception of audiovisual
signals from terrestrial, cable, satellite, Internet Protocol TV
(IPTV), or other transmission of analog and/or digital signals,
consisting of a tuner/receiver and a display encased in a single
housing.
0
3. In Sec. 305.5, add new paragraph (d) to read as follows:
Testing
Sec. 305.5 Determinations of estimated annual energy consumption,
estimated annual operating cost, and energy efficiency rating, and of
water use rate.
* * *
(d) Determinations of estimated annual energy consumption and the
estimated annual operating (energy) costs of televisions must be based
on the procedures contained in ``ENERGY STAR Program Requirements for
Televisions Eligibility Criteria Versions 4.0 and 5.0.'' Annual energy
consumption and cost estimates must be derived assuming 5 hours in on
mode and 19 hours in sleep (standby) mode per day. These ENERGY STAR
requirements are incorporated by reference into this section. These
incorporations by reference were approved by the Director of the
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.
Copies of the test procedure may be obtained at the Federal Trade
Commission, Consumer Response Center, Room 130, 600 Pennsylvania
Avenue, N.W., Washington, DC 20580; at the National Archives and
Records Administration (NARA); or from the Environmental Protection
Agency at (http://www.energystar.gov). For information on the
availability of this material at NARA, call (202) 741-6030, or go to:
(http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html). Copies of materials and standards
incorporated by reference also may be obtained from the issuing
organizations listed in this section.
0
4. In 305.8(a)(1), add the term ``televisions,'' after the term
``urinals,''.
0
5. In Sec. 305.10(a), remove the phrase ``or ceiling fans'' and add in
its place the phrase ``ceiling fans, and televisions''.
0
6. Add Sec. 305.17 to read as follows:
Sec. 305.17 Television labeling.
(a) Layout. All energy labels for televisions shall use one of
three shapes: a triangle, horizontal rectangle, and vertical rectangle
as detailed in Prototype Labels 8, 9, and 10 in Appendix L. All label
size, positioning, spacing, type sizes, positioning of headline, copy,
and line widths must be consistent with the prototype and sample labels
in Appendix L. The minimum label size for the adhesive label is 1.5'' x
4.7''. The minimum size for the cling tag triangle label is 4.2'' x
4.2'' (right angle sides).
(b) Type style and setting. The Arial series typeface or equivalent
shall be used exclusively on the label. Specific sizes, leading, and
faces to be used are indicated on the prototype labels. No hyphenation
should be used in setting headline or copy text. Positioning and
spacing should follow the prototypes closely. See the prototype labels
for specific directions.
(c) Colors. The basic colors of all labels covered by this section
shall be process yellow or equivalent and process black. The label
shall be printed full bleed process yellow. All type and graphics shall
be printed process black.
(d) Label types. The labels must be affixed to the product in the
form of an adhesive label or cling label as follows:
(1) Adhesive labels. All adhesive labels should be applied so they
can be easily removed without the use of tools or liquids, other than
water, but should be applied with an adhesive with an adhesion capacity
sufficient to prevent their dislodgment during normal handling
throughout the chain of distribution to the retailer or consumer. The
paper stock for pressure-sensitive or other adhesive labels shall have
a basic weight of not less than 58 pounds per 500 sheets (25x38) or
equivalent, exclusive of the release liner and adhesive. A minimum peel
adhesion capacity for the adhesive of 12 ounces per square inch is
suggested, but not required if the adhesive can otherwise meet the
above standard.
(2) Cling labels. Labels may be affixed, using the screen's static
charge, to the product in the form of a cling label. The cling label
shall be affixed in a way that prevents its dislodgment during normal
handling throughout the chain of distribution to the retailer or
consumer.
(e) Placement --
(1) Adhesive labels. Manufacturers shall affix adhesive labels on
the product's bezel adjacent to the viewable screen in such a position
that it is easily read by a consumer examining the product.
(2) Cling label. A cling label shall be affixed at the bottom right
hand corner of the screen in a position that it can be easily read by a
consumer examining the product.
(f) Label content. The television label shall contain the following
information:
(1) Headlines, texts, and statements as illustrated in the
prototype and sample labels in Appendix L to this part.
(2) Name of manufacturer or private labeler. This requirement
shall, in the case of a corporation, be satisfied only by the actual
corporate name, which may be preceded or followed by the name of the
particular division of the corporation. In the case of an individual,
partnership, or association, the name under which the business is
conducted shall be used.
(3) Model number(s) as designated by the manufacturer or private
labeler.
(4) Estimated annual energy costs determined in accordance with
Sec. 305.5 to this part and based on a usage rate of 5 hours in on
mode and 19 hours in standby (sleep) mode per day, and an electricity
cost rate of 11 cents per kWh.
(5) The applicable ranges of comparability for estimated annual
energy costs based on the labeled product's diagonal screen size,
according to the following table:
------------------------------------------------------------------------
Annual Energy Cost Ranges for Televisions
------------------------------------------------------------------------
Screen Size (diagonal) Low High
------------------------------------------------------------------------
0 to 19.9'' $4 $11
------------------------------------------------------------------------
20 to 29.9'' $4 $19
------------------------------------------------------------------------
[[Page 11496]]
30 to 39.9'' $11 $31
------------------------------------------------------------------------
40 to 49.9'' $15 $ 62
------------------------------------------------------------------------
50 to 59.9'' $21 $75
------------------------------------------------------------------------
60 to 69.9'' $31 $83
------------------------------------------------------------------------
70'' or more $39 $90
------------------------------------------------------------------------
(6) Placement of the labeled product on the scale proportionate to
the lowest and highest estimated annual energy costs as illustrated in
prototype and sample labels in Appendix L. When the estimated annual
energy cost of a given model of a covered product falls outside the
limits of the current range for that product, which could result from
the introduction of a new or changed model, the manufacturer shall
place the product at the end of the range closest to the model's energy
cost.
(7) The model's estimated annual energy consumption as determined
in accordance with Sec. 305.5 and based on a usage rate of 5 hours in
on mode and 19 hours in sleep (standby) per day.
(8) No marks or information other than that specified in this part
shall appear on or directly adjoining this label except that:
(i) A part or publication number identification may be included on
this label, as desired by the manufacturer. If a manufacturer elects to
use a part or publication number, it must appear in the lower right-
hand corner of the label and be set in 6-point type or smaller.
(ii) The manufacturer may include the ENERGY STAR logo on the label
as illustrated in Sample Labels 10, 11, and 12 in Appendix L. The logo
must be 0.375'' wide. Only manufacturers that have signed a Memorandum
of Understanding with the Department of Energy or the Environmental
Protection Agency may add the ENERGY STAR logo to labels on qualifying
covered products; such manufacturers may add the ENERGY STAR logo to
labels only on those covered products that are covered by the
Memorandum of Understanding.
0
7. In Sec. 305.20, add new paragraph (g) to read as follows:
Sec. 305.20 Paper catalogs and websites.
(g) Any manufacturer, distributor, retailer, or private labeler who
advertises televisions in a catalog shall include in such catalog
either:
(1) The EnergyGuide labels prepared in accordance with Sec. 305.17
for products they offer; or
(2) the estimated annual energy costs determined in accordance with
Sec. 305.5, and the following statement conspicuously placed in the
catalog: ``Your energy costs will depend on your utility rates and use.
The estimated energy cost is based on 5 hours of use per day and an
electricity cost of 11 cents per kWh.
For more information, visit (www.ftc.gov/appliances).''
* * * * *
0
8. Amend Appendix L by adding Prototype Labels 5, 6, and 7 and Sample
Labels 10, 11, and 12:
Appendix L to Part 305 - Sample Labels
BILLING CODE 6750-S
[[Page 11497]]
[GRAPHIC] [TIFF OMITTED] TP11MR10.001
Prototype Label 5
Triangular Television Label
[[Page 11498]]
[GRAPHIC] [TIFF OMITTED] TP11MR10.002
Prototype Label 6
Horizontal Rectangular Television Label
[[Page 11499]]
[GRAPHIC] [TIFF OMITTED] TP11MR10.003
Prototype Label 7
Vertical Rectangular Television Label
[[Page 11500]]
[GRAPHIC] [TIFF OMITTED] TP11MR10.004
Sample Label 10
Triangular Television Label
[[Page 11501]]
[GRAPHIC] [TIFF OMITTED] TP11MR10.005
Sample Label 11
Vertical Television Label
[[Page 11502]]
[GRAPHIC] [TIFF OMITTED] TP11MR10.006
Sample Label 12
Horizontal Television Label
By direction of the Commission.
Donald S. Clark,
Secretary.
[FR Doc. 2010-5152 Filed 3-10-10; 8:45 am]
BILLING CODE 6750-01-C