[Federal Register Volume 75, Number 64 (Monday, April 5, 2010)]
[Proposed Rules]
[Pages 17078-17079]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-7602]
-----------------------------------------------------------------------
DEPARTMENT OF ENERGY
10 CFR Part 431
[Docket No. EERE-2007-BT-CRT-0009]
Agency Information Collection: Energy Conservation Program:
Compliance and Certification Information Collection for Electric Motors
AGENCY: Office of Energy Efficiency and Renewable Energy, Department of
Energy.
ACTION: Notice and request for comment.
-----------------------------------------------------------------------
SUMMARY: The U.S. Department of Energy (DOE), pursuant to the Paperwork
Reduction Act of 1995, has initiated through the Office of Management
and Budget (OMB) the mandatory Compliance Certification information
collection request for certain 1 through 200 horsepower electric motors
covered under the Energy Policy and Conservation Act (EPCA), as
amended, Public Law 94-163, codified at, 42 U.S.C. 6291 et seq. Under
EPCA, a manufacturer or private labeler must certify its compliance
with energy efficiency standards for certain commercial and industrial
electric motors. 42 U.S.C. 6316(c) and 10 CFR 431.36.
DATES: Comments regarding this collection must be received on or before
May 5, 2010.
ADDRESSES: Comments must identify the information collection for
electric motors and provide the docket number EERE-2007-BT-CRT-0009. In
addition, comments must be submitted to: DOE Desk Officer, Office of
Information and Regulatory Affairs, Office of Management and Budget,
New Executive Office Building, Room 10102, 735 17th Street, NW.,
Washington, DC 20503, and to DOE. Comments to DOE may be submitted
using any of the following methods:
Mr. James Raba, U.S. Department of Energy, Building
Technologies Program, Mailstop EE-2J, 1000 Independence Ave., SW.,
Washington, DC 20585-0121 (submit one signed copy) or by fax at (202)
586-4617 or by e-mail at [email protected].
E-mail: [email protected]. Include the
docket number in the subject line of the message.
Hand Delivery/Courier: Ms. Brenda Edwards, U.S. Department
of Energy, Building Technologies Program, 950 L'Enfant Plaza, SW.,
Suite 600, Washington, DC 20024-2123. Telephone: (202) 586-2945. Please
submit one signed original paper copy.
Federal eRulemaking Portal: www.regulations.gov. Follow
the instructions for submitting comments.
FOR FURTHER INFORMATION CONTACT: Direct requests for additional
information or copies of the information collection instrument and
instructions to Mr. James Raba, U.S. Department of Energy, Building
Technologies Program (EE-2J), 950 L'Enfant Plaza, Washington, DC 20024-
2123, (202) 586-8654, [email protected].
In the Office of the General Counsel, contact Ms. Francine Pinto or
Mr. Michael Kido, U.S. Department of Energy, Office of the General
Counsel, GC-72, 1000 Independence Avenue, SW., Washington, DC 20085.
Telephone: (202) 586-9507. E-mail: [email protected] or
[email protected].
Background: EPCA establishes energy efficiency standards and test
procedures for certain commercial and industrial equipment, including
electric motors, 42 U.S.C. 6291 et seq., and states in relevant part
that, ``the Secretary [of Energy] shall require manufacturers to
certify'' that each electric motor meets the applicable efficiency
standards. (42 U.S.C. 6316(c)) To achieve this end, EPCA authorizes the
Secretary to issue the necessary rules requiring each manufacturer or
private labeler of covered electric motors to submit information and
reports to ensure compliance. (42 U.S.C. 6316(a)) This directive is
carried out under 10 CFR 431.36, Compliance Certification, which
requires a manufacturer or private labeler to submit a compliance
statement, as well as a certification report that provides energy
efficiency information for each basic model of electric motor that it
distributes in commerce in the United States.
[[Page 17079]]
In view of the above, the information to be collected is the same
as the Compliance Certification information, at appendix C to subpart B
of 10 CFR part 431, which provides a format for a manufacturer or
private labeler to report the energy efficiency of its basic models of
electric motors according to rated horsepower or kilowatts, number of
poles, and open or enclosed construction. Further, it provides a means
for a manufacturer or private labeler to certify compliance with the
applicable energy efficiency standards prescribed under section
342(b)(1) of EPCA, codified at 42 U.S.C. 6313(b)(1), through an
independent testing or certification program nationally recognized in
the United States (section 345(c) of the EPCA, codified at 42 U.S.C.
6316(c)). The information contained in the Compliance Certification is
a basis for the energy efficiency information marked on the permanent
nameplate of an electric motor and thereby enables purchasers to
compare the energy efficiencies of similar motors. 10 CFR 431.31.
Compliance Certification information facilitates voluntary compliance
with and enforcement of the energy efficiency standards established for
electric motors under EPCA 342(b)(1), 42 U.S.C. 6313(b)(1).
SUPPLEMENTARY INFORMATION: (1) OMB No.: 1910-5104. (2) Collection
Title: Title 10 of the Code of Federal Regulations, Part 431--Energy
Efficiency Program for Certain Commercial and Industrial Equipment:
Subpart B--Electric Motors: 10 CFR 431.36, Compliance Certification,
``Certification of Compliance with Energy Efficiency Standards for
Electric motors.'' Appendix C to Subpart B of Part 431--Compliance
Certification. (3) Type of Review: Reinstatement, without change, of a
previously approved collection for which approval has expired. (4)
Purpose: The purpose of the collection is two-fold: (a) To require the
manufacturer or private labeler of certain commercial or industrial
electric motors subject to energy efficiency standards prescribed under
section 342(b) of EPCA to establish, maintain, and retain records of
its test data and subsequent verification of any alternative efficiency
determination method used under part 431, et seq.; and (b) to preclude
distribution in commerce of any basic model of commercial or industrial
electric motor that is subject to an energy efficiency standard set
forth under subpart B of part 431, unless the manufacturer or private
labeler of that motor has submitted a Compliance Certification to DOE
according to the provisions under 10 CFR 431.36, certifying that the
basic model meets the requirements of the applicable standard. This
information ensures compliance with the energy efficiency standards for
certain commercial and industrial electric motors. (5) Estimated Number
of Respondents: There are approximately 100 manufacturers and private
labelers that distribute in commerce in the United States electric
motors covered under 10 CFR part 431, et seq. (6) Estimated Total
Burden Hours: There are approximately 300 total recordkeeping and
reporting hours (3 hours per manufacturer or private labeler) at a
total annualized cost of approximately $20,000 ($200 per manufacturer
or private labeler). (7) Number of Collections: The request contains
one information and recordkeeping requirement for all manufacturers or
private labelers.
Statutory Authority: Part B of Title III of EPCA, Energy
Conservation Program for Consumer Products Other than Automobiles,
Public Law 94-163, as amended, and section 3507(h)(1) of the
Paperwork Reduction Act of 1995 (Pub. L. 104-13, 44 U.S.C. Chapter
35).
Issued in Washington, DC on March 29, 2010.
Cathy Zoi,
Assistant Secretary, Energy Efficiency and Renewable Energy.
[FR Doc. 2010-7602 Filed 4-2-10; 8:45 am]
BILLING CODE 6450-01-P