[Federal Register Volume 75, Number 77 (Thursday, April 22, 2010)]
[Rules and Regulations]
[Page 20918]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: C1-2010-7309]



[[Page 20918]]

=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Mine Safety and Health Administration

30 CFR Parts 18 and 75

RIN 1219-AB34


High-Voltage Continuous Mining Machine Standard for Underground 
Coal Mines

Correction

    In rule document 2010-7309 beginning on page 17529 in the issue of 
Tuesday, April 6, 2010, make the following correction:

PART 18--ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES


Appendix I to Subpart D  [Corrected]

    On page 17549, in Appendix I to Subpart D, in the table titled 
Table 10--HIGH VOLTAGE TRAILING CABLE AMPACITIES AND OUTSIDE DIAMETERS, 
the first footnote should read as set forth below:
    *These ampacities are based on single isolated conductor in air, 
operated with open-circuited shield for a 90 [deg]C conductor 
temperature and an ambient temperature of 40 [deg]C.

[FR Doc. C1-2010-7309 Filed 4-21-10; 8:45 am]
BILLING CODE 1505-01-D