[Federal Register Volume 76, Number 182 (Tuesday, September 20, 2011)]
[Unknown Section]
[Pages 58142-58144]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2011-23945]
-----------------------------------------------------------------------
DEPARTMENT OF DEFENSE
Defense Acquisition Regulations System
48 CFR Parts 211 and 252
RIN 0750-AH05
Defense Federal Acquisition Regulation Supplement; Passive Radio
Frequency Identification (DFARS Case 2010-D014)
AGENCY: Defense Acquisition Regulations System, Department of Defense
(DoD).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: DoD is issuing a final rule amending the Defense Federal
Acquisition Regulation Supplement (DFARS) to update requirements
relating to the use of passive radio frequency identification (RFID).
DATES: Effective Date: September 20, 2011.
FOR FURTHER INFORMATION CONTACT: Dustin Pitsch, telephone 703-602-0289.
SUPPLEMENTARY INFORMATION:
I. Background
DoD published a proposed rule in the Federal Register at 76 FR 9714
on February 26, 2011, in response to a request of the Office of
Logistics and Materiel Readiness of the Office of the Secretary of
Defense (Acquisition, Technology, and Logistics) to update requirements
relating to the use of passive radio frequency identification (RFID).
II. Discussion and Analysis
DoD received comments from two respondents in response to the
proposed rule. One respondent expressed general support for the rule.
Comment: A respondent stated that RFID tags will play an expanded
role in inventory management and asset protection for the DoD and
expanded use should occur soon.
Response: DoD agrees that RFID use in inventory management is
expanding and will continue to expand.
Comment: A respondent stated that RFID tracking is not the current
industry standard for inventory management of pharmaceuticals and that
adding this requirement would cost the suppliers and DoD a significant
amount of time and money to implement. This respondent believes that
the current use of 2D barcodes is sufficient for tracking
pharmaceuticals and that the DoD should not require the use of passive
RFID.
Response: DoD agrees and the final rule does not include a
requirement for passive RFID use for pharmaceuticals.
III. Executive Orders 12866 and 13563
Executive Orders (E.O.s) 12866 and 13563 direct agencies to assess
all costs and benefits of available regulatory alternatives and, if
regulation is necessary, to select regulatory approaches that maximize
net benefits (including potential economic, environmental, public
health and safety effects, distributive impacts, and equity). E.O.
13563 emphasizes the importance of quantifying both costs and benefits,
of reducing costs, of harmonizing rules, and of promoting flexibility.
This is a significant regulatory action and, therefore, was subject to
review under section 6(b) of E.O. 12866, Regulatory Planning and
Review, dated September 30, 1993. This rule is not a major rule under 5
U.S.C. 804.
IV. Regulatory Flexibility Act
DoD has prepared a Final Regulatory Flexibility Analysis (FRFA)
consistent with the Regulatory Flexibility Act, 5 U.S.C. 601, et seq.
The FRFA is summarized as follows.
The DFARS previously listed approximately 20 specific DoD activity
addresses and provides the authority for using other ship-to locations
``outside the contiguous United States'' under certain circumstances.
However, the Defense Logistics Agency and the Navy proposed adding more
than 200 additional sites, making it impracticable to list all DoD
passive RFID addresses in the DFARS text or its associated clause.
Instead, this rule adds a Web site for contractors to find the RFID
Identifier for each specific DoD ship-to address that uses RFID
technology. Including the Web site in the DFARS has the added benefit
of enabling the addition of new ship-to addresses in the future as
necessary without the need to revise the DFARS in each case. This final
rule amends the revised, shortened list of ship-to addresses at DFARS
211.275-2(a)(2) to allow contracting officers to add tagging
requirements to contract deliverables shipping to DoDAACs not
specifically included in the list as they deem necessary.
The current OMB information collection justification for the clause
associated with the current DFARS, 252.211-7006, entitled ``Radio
Frequency Identification,'' lists the number of contractors impacted by
the RFID requirement as 25,500. While each contractor has multiple
submissions (one for each shipment), it takes only 1.12 seconds per
response. The rule changes impact, if any, should decrease the response
time and not increase it.
V. Paperwork Reduction Act
There are information collection requirements associated with the
use of RFIDs. However, there will be no substantive change to the
existing information collection requirements currently approved under
OMB Information Control Number 0704-0434, DFARS; Radio Frequency
Identification Advance Shipment Notices. Therefore, DoD has determined
that the final rule has no material impact on the approved collection.
List of Subjects in 48 CFR Parts 211 and 252
Government procurement.
Mary Overstreet,
Editor, Defense Acquisition Regulations System.
Therefore, 48 CFR parts 211 and 252 are amended as follows:
0
1. The authority citation for 48 CFR parts 211 and 252 continues to
read as follows:
Authority: 41 U.S.C. 1303 and 48 CFR chapter 1.
[[Page 58143]]
PART 211--DESCRIBING AGENCY NEEDS
0
2. The section heading for section 211.275 is revised to read as
follows:
211.275 Passive radio frequency identification.
211.275-1 [Amended]
0
3. Section 211.275-1 is amended to add the word ``Passive'' before the
phrase ``Radio Frequency Identification''.
0
4. Section 211.275-2 is amended to--
0
a. Revise paragraph (a) introductory text; and
0
b. Revise paragraph (a)(2).
The revisions read as follows:
211.275-2 Policy.
(a) Except as provided in paragraph (b) of this section, radio
frequency identification (RFID), in the form of a passive RFID tag, is
required for cases and palletized unit loads packaging levels and any
additional consolidation level(s) deemed necessary by the requiring
activity for shipments of items that--
* * * * *
(2) Will be shipped to one of the locations listed at http://www.acq.osd.mil/log/rfid/ or to--
(i) A location outside the contiguous United States when the
shipment has been assigned Transportation Priority 1; or
(ii) Any additional location(s) deemed necessary by the requiring
activity.
* * * * *
0
5. Section 211.275-3 is revised to read as follows:
211.275-3 Contract clause.
Use the clause at 252.211-7006, Passive Radio Frequency
Identification, in solicitations and contracts that will require
shipment of items meeting the criteria at 211.275-2, and complete
paragraph (b)(1)(ii) of the clause at 252.211-7006 as appropriate.
PART 252--SOLICITATION PROVISIONS AND CONTRACT CLAUSES
0
6. Section 252.211-7006 is revised to read as follows:
252.211-7006 Passive Radio Frequency Identification.
As prescribed in 211.275-3, use the following clause:
Passive Radio Frequency Identification (SEP 2011)
(a) Definitions. As used in this clause--
Advance shipment notice means an electronic notification used to
list the contents of a shipment of goods as well as additional
information relating to the shipment, such as passive radio
frequency identification (RFID) or item unique identification (IUID)
information, order information, product description, physical
characteristics, type of packaging, marking, carrier information,
and configuration of goods within the transportation equipment.
Bulk commodities means the following commodities, when shipped
in rail tank cars, tanker trucks, trailers, other bulk wheeled
conveyances, or pipelines:
(1) Sand.
(2) Gravel.
(3) Bulk liquids (water, chemicals, or petroleum products).
(4) Ready-mix concrete or similar construction materials.
(5) Coal or combustibles such as firewood.
(6) Agricultural products such as seeds, grains, or animal feed.
Case means either a MIL-STD-129 defined exterior container
within a palletized unit load or a MIL-STD-129 defined individual
shipping container.
Electronic Product Code\TM\ (EPC[supreg]) means an
identification scheme for universally identifying physical objects
via RFID tags and other means. The standardized EPC\TM\ data
consists of an EPC\TM\ (or EPC\TM\ identifier) that uniquely
identifies an individual object, as well as an optional filter value
when judged to be necessary to enable effective and efficient
reading of the EPC\TM\ tags. In addition to this standardized data,
certain classes of EPC\TM\ tags will allow user-defined data. The
EPC\TM\ Tag Data Standards will define the length and position of
this data, without defining its content.
EPCglobal[supreg] means a subscriber-driven organization
comprised of industry leaders and organizations focused on creating
global standards for the adoption of passive RFID technology.
Exterior container means a MIL-STD-129 defined container,
bundle, or assembly that is sufficient by reason of material,
design, and construction to protect unit packs and intermediate
containers and their contents during shipment and storage. It can be
a unit pack or a container with a combination of unit packs or
intermediate containers. An exterior container may or may not be
used as a shipping container.
Palletized unit load means a MIL-STD-129 defined quantity of
items, packed or unpacked, arranged on a pallet in a specified
manner and secured, strapped, or fastened on the pallet so that the
whole palletized load is handled as a single unit. A palletized or
skidded load is not considered to be a shipping container. A loaded
463L System pallet is not considered to be a palletized unit load.
Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part
II, Chapter 203, for marking of 463L System pallets.
Passive RFID tag means a tag that reflects energy from the
reader/interrogator or that receives and temporarily stores a small
amount of energy from the reader/interrogator signal in order to
generate the tag response. The only acceptable tags are EPC Class 1
passive RFID tags that meet the EPCglobal\TM\ Class 1 Generation 2
standard.
Radio frequency identification (RFID) means an automatic
identification and data capture technology comprising one or more
reader/interrogators and one or more radio frequency transponders in
which data transfer is achieved by means of suitably modulated
inductive or radiating electromagnetic carriers.
Shipping container means a MIL-STD-129 defined exterior
container that meets carrier regulations and is of sufficient
strength, by reason of material, design, and construction, to be
shipped safely without further packing (e.g., wooden boxes or
crates, fiber and metal drums, and corrugated and solid fiberboard
boxes).
(b)(1) Except as provided in paragraph (b)(2) of this clause,
the Contractor shall affix passive RFID tags, at the case- and
palletized- unit-load packaging levels, for shipments of items
that--
(i) Are in any of the following classes of supply, as defined in
DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation,
AP1.1.11:
(A) Subclass of Class I--Packaged operational rations.
(B) Class II--Clothing, individual equipment, tentage,
organizational tool kits, hand tools, and administrative and
housekeeping supplies and equipment.
(C) Class IIIP--Packaged petroleum, lubricants, oils,
preservatives, chemicals, and additives.
(D) Class IV--Construction and barrier materials.
(E) Class VI--Personal demand items (non-military sales items).
(F) Subclass of Class VIII--Medical materials (excluding
pharmaceuticals, biologicals, and reagents--suppliers should limit
the mixing of excluded and non-excluded materials).
(G) Class IX--Repair parts and components including kits,
assemblies and subassemblies, reparable and consumable items
required for maintenance support of all equipment, excluding
medical-peculiar repair parts; and
(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/rfid/ or to--
(A) A location outside the contiguous United States when the
shipment has been assigned Transportation Priority 1, or to--
(B) The following location(s) deemed necessary by the requiring
activity:
[[Page 58144]]
----------------------------------------------------------------------------------------------------------------
Contract line,
subline, or exhibit Location name City State DoDAAC
line item number
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------
(2) The following are excluded from the requirements of
paragraph (b)(1) of this clause:
(i) Shipments of bulk commodities.
(ii) Shipments to locations other than Defense Distribution
Depots when the contract includes the clause at FAR 52.213-1, Fast
Payment Procedures.
(c) The Contractor shall--
(1) Ensure that the data encoded on each passive RFID tag are
globally unique (i.e., the tag ID is never repeated across two or
more RFID tags) and conforms to the requirements in paragraph (d) of
this clause;
(2) Use passive tags that are readable; and
(3) Ensure that the passive tag is affixed at the appropriate
location on the specific level of packaging, in accordance with MIL-
STD-129 (Section 4.9.2) tag placement specifications.
(d) Data syntax and standards. The Contractor shall encode an
approved RFID tag using the instructions provided in the EPC\TM\ Tag
Data Standards in effect at the time of contract award. The EPC\TM\
Tag Data Standards are available at http://www.epcglobalinc.org/standards/.
(1) If the Contractor is an EPCglobal\TM\ subscriber and
possesses a unique EPC\TM\ company prefix, the Contractor may use
any of the identifiers and encoding instructions described in the
most recent EPC\TM\ Tag Data Standards document to encode tags.
(2) If the Contractor chooses to employ the DoD identifier, the
Contractor shall use its previously assigned Commercial and
Government Entity (CAGE) code and shall encode the tags in
accordance with the tag identifier details located at http://www.acq.osd.mil/log/rfid/tag_data.htm. If the Contractor uses a
third-party packaging house to encode its tags, the CAGE code of the
third-party packaging house is acceptable.
(3) Regardless of the selected encoding scheme, the Contractor
with which the Department holds the contract is responsible for
ensuring that the tag ID encoded on each passive RFID tag is
globally unique, per the requirements in paragraph (c)(1) of this
clause.
(e) Advance shipment notice. The Contractor shall use Wide Area
WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic
Submission of Payment Requests, to electronically submit advance
shipment notice(s) with the RFID tag ID(s) (specified in paragraph
(d) of this clause) in advance of the shipment in accordance with
the procedures at https://wawf.eb.mil/.
(End of clause)
[FR Doc. 2011-23945 Filed 9-19-11; 8:45 am]
BILLING CODE 5001-08-P