[Code of Federal Regulations]
[Title 21, Volume 1]
[Revised as of April 1, 2001]
From the U.S. Government Printing Office via GPO Access
[CITE: 21CFR74.2101]

[Page 409-410]
 
                        TITLE 21--FOOD AND DRUGS
 
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN 
                                SERVICES
 
PART 74--LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION--Table of Contents
 
                          Subpart C--Cosmetics
 
Sec. 74.2101  FD&C Blue No. 1.


    (a) Identity. The color additive FD&C Blue No. 1 is principally the 
disodium salt of ethyl[4-[p-[ethyl(m-sulfobenzyl)amino]--(o-
sulfophenyl)benzylidene]-2,5-cyclohexadien-1-ylidene](m-
sulfobenzyl)ammonium hydroxide inner salt with smaller amounts of the 
isomeric disodium salts of ethyl[4-[p-[ethyl(p-sulfobenzyl)amino]-
-(o-sulfophenyl)benzylidene]-2,5-cyclohexadien-1-ylidene](p-
sulfobenzyl)ammonium hydroxide inner salt and ethyl[4-[p-[ethyl(o-
sulfobenzyl)amino]--(o-sulfophenyl)benzylidene]-2,5-
cyclohexadien-1-ylidene](o-sulfobenzyl)ammonium hydroxide

[[Page 410]]

inner salt. Additionally, FD&C Blue No. 1 is manufactured by the acid 
catalyzed condensation of one mole of sodium 2-formylbenzenesulfonate 
with two moles from a mixture consisting principally of 3-
[(ethylphenylamino)methyl] benzenesulfonic acid, and smaller amounts of 
4-[(ethylphenylamino)methyl] benzenesulfonic acid and 2-
[(ethylphenylamino)methyl] benzenesulfonic acid to form the leuco base. 
The leuco base is then oxidized with lead dioxide and acid, or with 
dichromate and acid, or with manganese dioxide and acid to form the dye. 
The intermediate sodium 2-formylbenzenesulfonate is prepared from 2-
chlorobenzaldehyde and sodium sulfite.
    (b) Specifications. (1) The color additive FD&C Blue No. 1 shall 
conform in specifications to the requirements of Sec. 74.101(b).
    (2) FD&C Blue No. 1 Aluminum Lake shall be prepared in accordance 
with the requirements of Sec. 82.51 of this chapter.
    (c) Uses and restrictions. (1) FD&C Blue No. 1 may be safely used 
for coloring cosmetics generally, including cosmetics intended for use 
in the area of the eye, in amounts consistent with current good 
manufacturing practice.
    (2) FD&C Blue No. 1 Aluminum Lake may be safely used for coloring 
cosmetics intended for use in the area of the eye, in amounts consistent 
with current good manufacturing practice.
    (d) Labeling. The label of the color additive shall conform to the 
requirements of Sec. 70.25 of this chapter.
    (e) Certification. All batches of FD&C Blue No. 1 shall be certified 
in accordance with regulations in part 80 of this chapter.

[47 FR 42565, Sept. 28, 1982, as amended at 58 FR 17511, Apr. 5, 1993; 
59 FR 7638, Feb. 16, 1994]