[Code of Federal Regulations]
[Title 7, Volume 7, Parts 700 to 899]
[Revised as of January 1, 2001]
From the U.S. Government Printing Office via GPO Access
[CITE: 7CFR801.3]

[Page 590]
 
                          TITLE 7--AGRICULTURE
 
  CHAPTER VIII--GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION 
      (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE
 
PART 801--OFFICIAL PERFORMANCE REQUIREMENTS FOR GRAIN INSPECTION EQUIPMENT--Table of Contents
 
Sec. 801.3  Tolerances for barley pearlers.

    The maintenance tolerances for barley pearlers used in performing 
official inspection services shall be:

------------------------------------------------------------------------
                 Item                               Tolerance
------------------------------------------------------------------------
Timer switch:
  0 to 60 seconds.....................  5 seconds, deviation
                                         from standard clock
  61 to 90 seconds....................  7 seconds, deviation
                                         from standard clock
  Over 90 seconds.....................  10 seconds,
                                         deviation from standard clock
Pearled portion.......................  1.0 gram, mean
                                         deviation from standard barley
                                         pearler using barley
------------------------------------------------------------------------