[Code of Federal Regulations]
[Title 9, Volume 2, Parts 200 to end]
[Revised as of January 1, 2001]
From the U.S. Government Printing Office via GPO Access
[CITE: 9CFR354.60]

[Page 381-382]
 
                  TITLE 9--ANIMALS AND ANIMAL PRODUCTS
 
     CHAPTER III--FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF 
                               AGRICULTURE
 
PART 354--VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF--Table of Contents
 
Sec. 354.60  Approval of official identification.

    (a) Any label or packaging material which bears any official 
identification shall be used only in such manner as the Administrator 
may prescribe. No label or packaging material bearing official 
identification may be used unless finished copies or samples of such 
labels and packaging material have been approved by the Administrator. 
No label bearing official identification shall be printed for use until 
the printer's final proof has been approved by the Administrator, and no 
label, other than labels for shipping containers or containers for 
institutional packs, bearing any official identification shall be used 
until finished copies or samples of such labels have been approved by 
the Administrator. Final approval may be given to printer's final proof 
or photostatic copies of labels for shipping containers or containers 
for institutional packs, and no such labels shall be used until such 
proofs or copies have been approved by the Administrator. A label which 
bears official identification shall not bear any statement that is false 
or misleading, and if labels in the name of the same packer or 
distributor, or bearing the same brand

[[Page 382]]

name, are used on the same or similar products which are prepared from 
products which are not inspected, the diameter of the inspection mark 
used on labels for inspected products shall be equal to at least one-
tenth of the length of the label, plus at least one-tenth of the width 
of the label. If the labeling is printed or otherwise applied directly 
to the container, the principal display panel of such container shall, 
for this purpose, be considered as the label.