[Code of Federal Regulations]
[Title 30, Volume 2]
[Revised as of July 1, 2001]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR250.109]

[Page 251]
 
                       TITLE 30--MINERAL RESOURCES
 
                CHAPTER II--MINERALS MANAGEMENT SERVICE,
                       DEPARTMENT OF THE INTERIOR
 
PART 250--OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF--Table of Contents
 
                           Subpart A--General
 
Sec. 250.109  What documents must I prepare and maintain related to welding?

    (a) You must submit a Welding Plan to the District Supervisor before 
you begin drilling or production activities on a lease. You may not 
begin welding until the District Supervisor has approved your plan.
    (b) You must keep the following at the site where welding occurs:
    (1) A copy of the plan and its approval letter; and
    (2) Drawings showing the designated safe-welding areas.