[Code of Federal Regulations]
[Title 30, Volume 2]
[Revised as of July 1, 2001]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR250.112]

[Page 252]
 
                       TITLE 30--MINERAL RESOURCES
 
                CHAPTER II--MINERALS MANAGEMENT SERVICE,
                       DEPARTMENT OF THE INTERIOR
 
PART 250--OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF--Table of Contents
 
                           Subpart A--General
 
Sec. 250.112  What standards must my welding equipment meet?

    Your welding equipment must meet the following requirements:
    (a) All engine-driven welding equipment must be equipped with spark 
arrestors and drip pans;
    (b) Welding leads must be completely insulated and in good 
condition;
    (c) Hoses must be leak-free and equipped with proper fittings, 
gauges, and regulators; and
    (d) Oxygen and fuel gas bottles must be secured in a safe place.