[Code of Federal Regulations]
[Title 11, Volume 1]
[Revised as of January 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 11CFR8.5]

[Page 45]
 
                       TITLE 11--FEDERAL ELECTIONS
 
                 CHAPTER I--FEDERAL ELECTION COMMISSION
 
PART 8--NATIONAL VOTER REGISTRATION ACT (42 U.S.C. 1973gg-1 et seq.)--Table of Contents
 
            Subpart B--National Mail Voter Registration Form
 
Sec. 8.5  Format.

    (a) The application shall conform to the technical specifications 
described in the Federal Election Commission's National Mail Voter 
Registration Form Technical Specifications.
    (b) Size. The application shall consist of a 5" by 8" application 
card of sufficient stock and weight to satisfy postal regulations. The 
application card shall be attached by a perforated fold to another 5" by 
8" card that contains space for the information set forth at 11 CFR 
8.4(c).
    (c) Layout. (1) The application shall be sealable.
    (2) The outside of the application shall contain an appropriate 
number of address lines to be completed by the applicant using the state 
information provided.
    (3) Both sides of the application card shall contain space 
designated ``For Official Use Only.''
    (d) Color. The application shall be of ink and paper colors of 
sufficient contrast to permit for optical scanning capabilities.
    (e) Signature field. The application shall contain a signature field 
in lieu of a signature line.
    (f) Type size. (1) All print on the form shall be of the largest 
practicable type size.
    (2) The requirements on the form specified in 11 CFR 8.4(b)(1), (6), 
and (7) shall be in print identical to that used in the attestation 
portion of the application required by 11 CFR 8.4(b)(2).