[Code of Federal Regulations] [Title 15, Volume 2] [Revised as of January 1, 2002] From the U.S. Government Printing Office via GPO Access [CITE: 15CFR768.10] [Page 544-545] TITLE 15--COMMERCE AND FOREIGN TRADE CHAPTER VII--BUREAU OF EXPORT ADMINISTRATION, DEPARTMENT OF COMMERCE PART 768--FOREIGN AVAILABILITY DETERMINATION PROCEDURES AND CRITERIA--Table of Contents Sec. 768.10 Removal of controls on less sophisticated items. Where the Secretary has removed national security controls on an item for foreign availability reasons, the Secretary will also remove controls on similar items that are controlled for national security reasons and whose functions, technological approach, performance thresholds, and other attributes that form the basis for national security export controls do not exceed the technical parameters of the item that BXA has decontrolled for foreign availability reasons. Supplement No. 1 to Part 768--Evidence of Foreign Availability This supplement provides a list of examples of evidence that the Bureau of Export Administration (BXA) has found to be useful in conducting assessments of foreign availability. A claimant submitting evidence supporting a claim of foreign availability should review this list for suggestions as evidence is collected. Acceptable evidence indicating possible foreign availability is not limited to these examples, nor is any one of these examples, usually, in and of itself, necessarily sufficient to meet a foreign availability criterion. A combination of several types of evidence for each criterion usually is required. A Foreign Availability Submission (FAS) should include as much evidence as possible on all four of the criteria listed below. BXA combines the submitted evidence with the evidence that it collects from other sources. BXA evaluates all evidence, taking into account factors that may include, but are not limited to: Information concerning the source of the evidence, corroborative or contradictory indications, and experience concerning the reliability or reasonableness of such evidence. BXA will assess all relevant evidence to determine whether each of the four criteria has been met. Where possible, all information should be in writing. If information is based on third party documentation, the submitter should provide such documentation to BXA. If information is based on oral statements a third party made, the submitter should provide a memorandum of the conversation to BXA if the submitter cannot obtain a written memorandum from the source. BXA will amend this informational list as it identifies new examples of evidence. (a) Examples of evidence of foreign availability: The following are intended as examples of evidence that BXA will consider in evaluating foreign availability. BXA will evaluate all evidence according to the provisions in Sec. 768.7(c) of this part in order for it to be used in support of a foreign availability determination. This list is illustrative only. (1) Available-in-fact: (i) Evidence of marketing of an item in a foreign country (e.g., an advertisement in the media of the foreign country that the item is for sale there); (ii) Copies of sales receipts demonstrating sales to foreign countries; (iii) The terms of a contract under which the item has been or is being sold to a foreign country; (iv) Information, preferably in writing, from an appropriate foreign government official that the government will not deny the sale of an item it produces to another country in accordance with its laws and regulations; (v) Information, preferably in writing, from a named company official that the company legally can and would sell an item it produces to a foreign country; (vi) Evidence of actual shipments of the item to foreign countries (e.g., shipping documents, photographs, news reports); (vii) An eyewitness report of such an item in operation in a foreign country, providing as much information as available, including where possible the make and model of the item and its observed operating characteristics; (viii) Evidence of the presence of sales personnel or technical service personnel in a foreign country; (ix) Evidence of production within a foreign country; [[Page 545]] (x) Evidence of the item being exhibited at a trade fair in a foreign country, particularly for the purpose of inducing sales of the item to the foreign country; (xi) A copy of the export control laws or regulations of the source country, showing that the item is not controlled; or (xii) A catalog or brochure indicating the item is for sale in a specific country. (2) Foreign (non-U.S.) source: (i) Names of foreign manufacturers of the item including, if possible, addresses and telephone numbers; (ii) A report from a reputable source of information on commercial relationships that a foreign manufacturer is not linked financially or administratively with a U.S. company; (iii) A list of the components in the U.S. item and foreign item indicating model numbers and their sources; (iv) A schematic of the foreign item identifying its components and their sources; (v) Evidence that the item is a direct product of foreign technology (e.g., a patent law suit lost by a U.S. producer, a foreign patent); (vi) Evidence of indigenous technology, production facilities, and the capabilities at those facilities; or (vii) Evidence that the parts and components of the item are of foreign origin or are exempt from U.S. licensing requirements by the parts and components provision Sec. 732.4 of the EAR. (3) Sufficient quantity: (i) Evidence that foreign sources have the item in serial production; (ii) Evidence that the item or its product is used in civilian applications in foreign countries; (iii) Evidence that a foreign country is marketing in the specific country an item of its indigenous manufacture; (iv) Evidence of foreign inventories of the item; (v) Evidence of excess capacity in a foreign country's production facility; (vi) Evidence that foreign countries have not targeted the item or are not seeking to purchase it in the West; (vii) An estimate by a knowledgeable source of the foreign country's needs; or (viii) An authoritative analysis of the worldwide market (i.e., demand, production rate for the item for various manufacturers, plant capacities, installed tooling, monthly production rates, orders, sales and cumulative sales over 5-6 years). (4) Comparable quality: (i) A sample of the foreign item; (ii) Operation or maintenance manuals of the U.S. and foreign items; (iii) Records or a statement from a user of the foreign item; (iv) A comparative evaluation, preferably in writing, of the U.S. and foreign items by, for example, a western producer or purchaser of the item, a recognized expert, a reputable trade publication, or independent laboratory; (v) A comparative list identifying, by manufacturers and model numbers, the key performance components and the materials used in the item that qualitatively affect the performance of the U.S. and foreign items; (vi) Evidence of the interchangeability of U.S. and foreign items; (vii) Patent descriptions for the U.S. and foreign items; (viii) Evidence that the U.S. and foreign items meet a published industry, national, or international standard; (ix) A report or eyewitness account, by deposition or otherwise, of the foreign item's operation; (x) Evidence concerning the foreign manufacturers' corporate reputation; (xi) Comparison of the U.S. and foreign end item(s) made from a specific commodity, tool(s), device(s), or technical data; or (xii) Evidence of the reputation of the foreign item including, if possible, information on maintenance, repair, performance, and other pertinent factors. Supplement No. 2 to Part 768--Items Eligible for Expedited Licensing Procedures [Reserved]