[Code of Federal Regulations] [Title 7, Volume 7] [Revised as of January 1, 2002] From the U.S. Government Printing Office via GPO Access [CITE: 7CFR801.12] [Page 597] TITLE 7--AGRICULTURE CHAPTER VIII--GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE PART 801--OFFICIAL PERFORMANCE REQUIREMENTS FOR GRAIN INSPECTION EQUIPMENT--Table of Contents Sec. 801.12 Design requirements incorporated by reference. (a) Moisture meters. All moisture meters approved for use in official grain moisture determination and certification shall meet applicable requirements contained in the FGIS Moisture Handbook and the General Code and Grain Moisture Meters Code of the 1991 edition of the National Institute of Standards and Technology's (NIST) Handbook 44, ``Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices.'' Pursuant to the provisions of 5 U.S.C. 552(a), the materials in Handbook 44 are incorporated by reference as they exist on the date of approval and a notice of any change in these materials will be published in the Federal Register. The NIST Handbook is for sale by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20403. It is also available for inspection at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC. The following Handbook 44 requirements are not incorporated by reference: General Code (1.10.) G-S.5.5. Money Values, Mathematical Agreement G-T.1. Acceptance Tolerances G-UR.3.3. Position of Equipment G-UR.3.4. Responsibility, Money-Operated Devices Grain Moisture Meters (5.56.) N.1.1. Transfer Standards N.1.2. Minimum Test N.1.3. Temperature Measuring Equipment T.2. Tolerance Values T.3. For Test Weight Per Bushel Indications or Recorded Representations UR.3.2. Other Devices not used for Commercial Measurement UR.3.7. Location UR.3.11. Posting of Meter Operating Range (b) [Reserved] [57 FR 2673, Jan. 23, 1992]