[Code of Federal Regulations]
[Title 7, Volume 7]
[Revised as of January 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 7CFR801.5]

[Page 594]
 
                          TITLE 7--AGRICULTURE
 
  CHAPTER VIII--GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION 
      (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE
 
PART 801--OFFICIAL PERFORMANCE REQUIREMENTS FOR GRAIN INSPECTION EQUIPMENT--Table of Contents
 
Sec. 801.5  Tolerance for diverter-type mechanical samplers.

    The maintenance tolerance for diverter-type mechanical samplers 
(primary, or primary and secondary in combination) used in performing 
official inspection services shall be 10 percent, mean 
deviation from standard sampling device using corn or the same type of 
grain that the system will be used to sample.