[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR15.7]

[Page 83]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 15--REQUIREMENTS FOR APPROVAL OF EXPLOSIVES AND SHEATHED EXPLOSIVE UNITS--Table of Contents
 
                      Subpart A--General Provisions
 
Sec. 15.7  Approval marking.

    (a) An approved explosive or sheathed explosive unit shall be 
marketed only under the brand or trade name specified in the approval.
    (b) The wrapper of each cartridge and each case of approved 
explosives shall be legibly labeled with the following: the brand or 
trade name, ``MSHA Approved Explosive'', the test detonator strength, 
and the minimum product firing temperature.
    (c) The outer covering of each sheathed explosive unit and each case 
of approved sheathed explosive units shall be legibly labeled with the 
following: the brand or trade name, ``MSHA Approved Sheathed Explosive 
Unit'', the test detonator strength, and the minimum product firing 
temperature.

[FR 46761, Nov. 18, 1988; 54 FR 351, Jan. 5, 1989; 54 FR 27641, June 30, 
1989; 60 FR 33723, June 29, 1995]