[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR27.7]

[Page 142-143]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 27--METHANE-MONITORING SYSTEMS--Table of Contents
 
                      Subpart A--General Provisions
 
Sec. 27.7  Certification plate or label.

    A certified methane-monitoring system or component thereof shall be 
identified with a certification plate or label which is attached to the 
system or component in a manner acceptable to MSHA. The method of 
attachment shall not impair the explosion-proof characteristics of any 
enclosure. The plate or label shall be of serviceable material, 
acceptable to MSHA, and shall contain the following inscription with 
spaces for appropriate identification of the system or component and 
assigned certificate number:

Manufacturer's Name_____________________________________________________
Description_____________________________________________________________
                                                                  (Name)
Model or Type No________________________________________________________

[[Page 143]]

Certified as complying with the applicable requirements of Schedule 32A.
Certificate No__________________________________________________________