[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR28.20]

[Page 149]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 28--FUSES FOR USE WITH DIRECT CURRENT IN PROVIDING SHORT-CIRCUIT PROTECTION FOR TRAILING CABLES IN COAL MINES--Table of Contents
 
                   Subpart C--Approval and Disapproval
 
Sec. 28.20  Certificates of approval; scope of approval.


    (a) MSHA shall issue certificates of approval pursuant to the 
provisions of this subpart only for individual, completely fabricated 
fuses which have been examined, inspected, and tested as specified in 
Sec. 28.10, and have been evaluated by MSHA to ensure that they meet the 
minimum requirements prescribed in this part.
    (b) MSHA shall not issue an informal notification of approval.