[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR28.3]

[Page 148]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 28--FUSES FOR USE WITH DIRECT CURRENT IN PROVIDING SHORT-CIRCUIT PROTECTION FOR TRAILING CABLES IN COAL MINES--Table of Contents
 
                      Subpart A--General Provisions
 
Sec. 28.3  Installation, use, and maintenance of approved fuses.

    Approved fuses shall be installed and maintained in accordance with 
the specifications prescribed by the manufacturer of the fuses, and 
shall be selected and used in accordance with the standards prescribed 
for short-circuit protective devices for trailing cables in Parts 75 and 
77, Subchapter O of this chapter.