[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR33.36]

[Page 158]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 33--DUST COLLECTORS FOR USE IN CONNECTION WITH ROCK DRILLING IN COAL MINES--Table of Contents
 
                      Subpart C--Test Requirements
 
Sec. 33.36  Method of drilling; combination unit or dust-collecting system.

    Drilling shall be conducted in accordance with the applicant's 
specifications and operating instructions. If special drill bits or 
drill steel are required, they shall be furnished to MSHA by the 
applicant. Otherwise the drill bit and drill steel requirements stated 
in paragraphs (b) and (c) of Sec. 33.35 shall be complied with for all 
types of combination units or dust-collecting systems.