[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR35.10]

[Page 161-162]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 35--FIRE-RESISTANT HYDRAULIC FLUIDS--Table of Contents
 
                      Subpart A--General Provisions
 
Sec. 35.10  Approval labels or markings.

    (a) A certificate of approval will be accompanied by a photograph of 
a design for an approval label or marking, which shall bear the emblem 
of the Mine Safety and Health Administration and shall be inscribed 
substantially as follows:

               Permissible Fire-Resistant Hydraulic Fluid

MSHA Approval No._______________________________________________________
Issued to_______________________________________________________________
                                                 (Name of Applicant)    

    (b) A label so inscribed shall be attached to each fluid container 
in such a manner that it cannot be easily removed or containers may be 
so marked with a metal stencil. The letters and numbers shall be at 
least \1/2\ inch in height and of a color which contrasts with that of 
the container.
    (c) For a concentrate the label or marking shall clearly indicate 
that the certification thereof applies only when the concentrate is used 
in exact conformance with the instructions on such label or marking. The 
label or marking shall clearly indicate the exact amount of water or 
other vehicle to make the fire-resistant hydraulic fluid upon

[[Page 162]]

which the certificate of approval was based.
    (d) Appropriate instructions and caution statements on the handling 
of the hydraulic fluid or concentrate shall be included on the approval 
label or marking.
    (e) Use of MSHA's approval label or marking obligates the applicant 
to whom the certificate of approval was granted to maintain the fire-
resistant characteristics of the hydraulic fluid and guarantees that it 
is manufactured according to the specifications upon which the 
certificate of approval was based. Use of the approval label or marking 
is not authorized except on containers of hydraulic fluids that conform 
strictly with the specifications and characteristics upon which the 
certificate of approval was based.

[Sched. 30, 24 FR 10201, Dec. 17, 1959, as amended at 43 FR 12317, Mar. 
24, 1978]