[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR36.11]

[Page 169]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 36--APPROVAL REQUIREMENTS FOR PERMISSIBLE MOBILE DIESEL-POWERED TRANSPORTATION EQUIPMENT--Table of Contents
 
                      Subpart A--General Provisions
 
Sec. 36.11  Approval plates.

    (a) A certificate of approval will be accompanied by a photograph of 
an approval plate, bearing the emblem of the Mine Safety and Health 
Administration and spaces for the approval number, the type, the serial 
number, and ventilation requirement; the name of the complete assembly; 
and the name of the applicant.
    (b) The applicant shall reproduce the design as a separate plate, 
which shall be attached, in a suitable place, on each complete assembly 
to which it relates. The size, type, and method of attaching and 
location of an approval plate are subject to MSHA's approval. The method 
of affixing the approval plate shall not impair the permissibility 
(explosion-proof) features of the complete assembly of mobile diesel-
powered transportation equipment.
    (c) The approval plate identifies the equipment, to which it is 
attached, as permissible and is the applicant's guarantee that the 
equipment complies with the requirements of this part. Without an 
approval plate no equipment is considered permissible under the 
provisions of this part.
    (d) Use of the approval plate obligates the applicant to whom the 
certificate of approval was granted to maintain in his plant the quality 
of each complete assembly bearing it and guarantees that it is 
manufactured and assembled according to the drawings, specifications, 
and descriptions upon which a certificate of approval was based.

[Sched. 31, 26 FR 645, Jan. 24, 1961, as amended at 43 FR 12318, Mar. 
24, 1978]