[Code of Federal Regulations]
[Title 30, Volume 1]
[Revised as of July 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 30CFR57.3202]

[Page 319]
 
                       TITLE 30--MINERAL RESOURCES
 
  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
 
PART 57--SAFETY AND HEALTH STANDARDS--UNDERGROUND METAL AND NONMETAL MINES--Table of Contents
 
                        Subpart B--Ground Control
 
Sec. 57.3202  Scaling tools.

    Where manual scaling is performed, a scaling bar shall be provided. 
This bar shall be of a length and design that will allow the removal of 
loose material without exposing the person performing the work to 
injury.